Cannot access my Iphone 3gs after upgrading to 5.01

Hi,
I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
Software and I accept.
That was the mistake I made as it upgraded to 5.01 and I cannot access
myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
"There is no Sim card installed in the Iphone your are attempting to
activate"
I tired the following with no success.
Itried downgrading from 5.01 to 4.33 by downloading firmware from google.  Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
Please help.
Thanksyou,
Charles.

Is the SIM that is installed from the carrier the device is locked to?
Was the device hacked or jailbroken?  Possibly to unlock the device?

Similar Messages

  • HT4623 i cannot activate my iphone 3gs after upgraded to ios 6.1

    i cannot activate my iphone 3gs after upgraded to ios 6.1, please help!

    read http://support.apple.com/kb/TS3424

  • TS1538 I cannot sync my iPhone 3GS after upgrading to a new computer and installing iTunes

    i am trying to sync my iPhone 3GS to a new computer. I downloaded and installed iTunes and copied over the iTunes folder into My Music. Unfortunately iTunes on the new computer does not recognize my iPhone.
    - The old computer was running windows XP OS 32bit. My new computer is running Windows 7, 64 bit.
    - I have installed iTunes on the new computer. Windows OS recognizes the iPhone but iTunes does not. I have uninstalled and reinstall iTunes a few times now. On one reinstall, i recieved the following messages:  "an iPhone has been detected, but it could not be identified. Please disconnect and reconnect the iPhone, then try again".  Upon trying again, i recieved this message: "iTunes could not connect to the iPhone because an invalid response was received from the device".
    every other time, nothing happens other that Windows prompting that the iPhone is detected. Any suggestions appreciated.
    thanks, Singletrack200

    Made a new folder and that solved my problem

  • IPhone 3GS cannot access to 3G network after upgrading to OS 5

    My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
    Any idea how to resolve this?

    zlwczr wrote:
    Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5? 
    No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

  • Why can't i activate my iphone 3gs after upgrading it to ios 6?

    why can't i activate my iphone 3gs after upgrading it to ios 6?
    It says,
    ''There is no sim card installed in the iphone you are attempting to activate''
    Thanks for your help in advance!
    Kayl07

    There are several common causes for this problem:
    Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
    You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
    Your phone is jailbroken or otherwise hacked.

  • I cant activate my iphone 3gs after upgrade to 5.1.1

    i cant activate my iphone 3gs after upgrade to 5.1.1

    I am experiencing the same issue and could use some advice:
    Yesterday I plugged my Iphone 3GS into my computer and I selected in Itunes to update to the latest IOS 5.1.1.
    Before I did this the iphone worked correctly, and after I did this it will not let me access the apps at all. I went to the Apple store and the rep told me I needed to have a working AT&T sim installed in it to complete the upgrade. I went to the AT&T store and had them put one of their working sim card in and it would not work.  The AT&T rep said he has seen several people with Iphone 3GS who updated to the latest IOS 5.1.1 whos phones will not recognize the sim card and thus will not let you get to the apps. 
    Does anyone know how to correct this problem?

  • No apps on my iPhone 3GS after upgrade to 5.0

    I can't get my apps from my computer to my iPhone 3GS after upgrading to 5.0.
    Do I have to DL all my apps again  from the app store?

    I am experiencing the same issue and could use some advice:
    Yesterday I plugged my Iphone 3GS into my computer and I selected in Itunes to update to the latest IOS 5.1.1.
    Before I did this the iphone worked correctly, and after I did this it will not let me access the apps at all. I went to the Apple store and the rep told me I needed to have a working AT&T sim installed in it to complete the upgrade. I went to the AT&T store and had them put one of their working sim card in and it would not work.  The AT&T rep said he has seen several people with Iphone 3GS who updated to the latest IOS 5.1.1 whos phones will not recognize the sim card and thus will not let you get to the apps. 
    Does anyone know how to correct this problem?

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • TS1567 I cannot activate my iphone 3gs after I updated to ios 6.

    I cannot activate my iphone 3gs after i updated to ios 6.0.1 and all it shows when i start the phone is connect to itunes. I have tried
    several time to get it back as normal but its the same all the time. Can someone please help...
    Thanks

    The typical cause is that the device has been hacked or jailbroken.

  • Cannot activate my iphone 3gs after restoring it to ios

    cannot activate my iphone 3gs after restoring it to ios

    The typical cause is that the device has been hacked or jailbroken.

  • HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

    im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

    Activation issues are almost always the result of a device that has been hacked or jailbroken.
    If this is the case, no support can be provided here.

  • HT1414 how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    how can i activate my iphone 3gs after upgrading to ios6? it could not activate....

    If your phone was previously hacked to unlock it, when you updated the hack was removed and it's re-locked to the original carrier.  The phone will now activate and operate only with that original carrier.

  • I can,t activate iphone 3gs after upgrade 6.1.2

    I can,t activate my iphone 3gs after upgrade 6.1.2.Now what i can do

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>Carrier?

  • HT4623 i cannot activating my iphone 3gs after update

    i cannot activating my iphone 3gs after update?

    That's because it was jailbroken, either now or in the past.  We cannot provide support for jailbroken phones here.

  • I cannot access my app store after upgrading to Mac Os10.8.2

    I have problem accessing to the software update or the app store. This all happen after i upgrade to MAc OS 10.8.2 and certain software upate. Now i cant access the app store. Everytime i click on it, it just bounce for a few second then stop. Another issue is 'finder'. I cannot access the download or my folder in 'finders'. Help....

    Yes, if you can follow mcgerbs advice and re-install OS X. There isn't any archive & install selection in 10.8.
    Boot up holding command-r keys into your Recovery Volume.
    The screen should give you these choices...
    Restore from TM backup
    Reinstall Mac OS X
    Get help online
    Disk Utility
    First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X. This will be an install "in place" and shouldn't effect any of your own data or settings.

Maybe you are looking for

  • Default pdf viewer for Digital Booklet

    I have Adobe Reader 8.0 on my computer as my default viewer for Acrobat documents. I also have Adobe Acrobat 6.0 Professional installed, which I use to create pdfs. When I click on a digital booklet in iTunes, it opens with 6.0 with an error message.

  • Mac Mini only displays magnifying glass after login

    The computer will boot up properly in Safe Mode. I have ran Disk Utility and have reset the permissions. That didn't work. I am trying to get away from doing a re-install. Does anyone have any suggestions?

  • $100 credit not applied months later

    Verizon Stink. I was promised $100.00 of each new phone activation back at the end of march when I purchased 2 new Htc one m8's. I still haven't received it and they are now saying I will not get it. I had a corporate store where I purchased my phone

  • Clearing error code C0000 on Pixma MP640

    Is there a secret to clearing my printer of this error code C0000? I have Pixma MP640. I tried powering down and also unplugging for 15 minutes. Thanks for your input

  • Client attributes/information

    Hello, I am developing a video conference application using flex/FMS. I am done with the basic coding and things are working fine. But I am not able to figure how I can make additional information about each client available to the other clients. Say