Cannot access my own secure network with G4 iBook

I set up a WPA secure network with a AirPort Extreme Base Station. No problem using it with my G4 iMac. However, when I try to access it with a second computer, a G4 iBook laptop, using the same WPA password I use to access it with my iMac, I get an error message.
Using the Setup Assistant with the iBook gives me an "invalid password" message. I know it is the correct password. I set it up and I use it with the iMac!
When the network is unsecured (no password needed) the iBook can access it, no problem.
Please tell me what I need to do to be able to access my own secure network with my iBook. TIA!

The only thing I can think of is the firmware for the AirPort card in the iBook, which is version 9.52. I could not find anywhere in Apple's website how to upgrade this. Does anybody know how to upgrade this firmware?
If there is any firmware update to the card it is done automagically whenever the corresponding AirPort software update is applied. There is no user notification and no way for the user to make updates diretly.

Similar Messages

PDK 9.0.4 Error: cannot access class oracle.security.jazn.realm.RealmUser

Dear Forum,
we are developing portlets for Portal 3.0.9.8. We use the default JPDK version, that comes with the standalone Oracle OC4J 9.0.4 bundled with PDK.
We want to improve our portlet by check the userid of the portal user. Therefore, we want to use oracle.portal.provider.v2.ProviderUser.getUser().getName()
in a JSP.
First - even before the method call - we included
<%@ page import="oracle.portal.provider.v2.http.ServletProviderUser" %>
But even this 1 statement gives in JDeveloper 9.0.4 with the libs pdkjava and ptlshare from the OC4J the following error:
Error: cannot access class oracle.security.jazn.realm.RealmUser; file oracle\security\jazn\realm\RealmUser.class not found
What is wrong here? What missing library we must include?
Thank You in advance

Problem solved. Need to include jazn.jar in project's lib-paths.

Error: cannot access class oracle.security.jazn.realm.RealmUser

Hi,
I try to compile this simple jsp, which use jpdkv2, with jdeveloper 9i.
But I obtain this error:
Error: cannot access class oracle.security.jazn.realm.RealmUser; file oracle\security\jazn\realm\RealmUser.class not found
Someone has an idea ?
Source code of my jsp:
<%@ page contentType="text/html;charset=windows-1252"%>
<%@page import = "oracle.portal.provider.v2.render.PortletRenderRequest" %>
<%@page import = "oracle.portal.provider.v2.http.HttpCommonConstants" %>
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)
request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
%>
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252">
<TITLE>
Hello World
</TITLE>
</HEAD>
<BODY>
<H2>
The current time is:
</H2>
<P>
<% out.println((new java.util.Date()).toString()); %>
</P>
<P>Hello: <%= portletRequest.getUser().getName() %></P>
</BODY>
</HTML>

Please check if jazn.jar is available under your <YOUR_OC4J_PATH>\j2ee\home folder.
This library files contains all the security related classes required by jpdkv2 providers.

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

Cannot connect to the secure network but can to the guest network

I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.

Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked!

I am unable to join my own wifi network with new iphone 5

I am unable to join my own wifi network with new iphone 5. It has the latest software downloaded too. Keeps saying unable to join network after I type in the password. All my other devices are able to join but just not the iphone. I've called Verizon and my internet provider and they have been unable to help. I had no problems with my iphone 4 with this very same issue. Please help or I'll be forced to return this phone. I have 13 days left.

Try power-cycling your router (unplug for 15 seconds, then plug back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, and try joining your network again. Note: resetting network settings will erase passwords for previously joined networks on your phone.

I cannot access i cloud on windows7 with my apple id

i cannot access i cloud on windows7 with my apple id

I have had this problem since icloud went live..!!!

Question about : Securing Networks with ASA Foundation (SNAF)

Dear All,
I would like to ask about the exam Securing Networks with ASA Foundation (SNAF) as below:
1- How i can download documents before i take exam? ( i mean did it have offline file?)
2- i was pass CCNA and CCDA already so can i continuous to take this exam?
I try to find ebook and offline file from Cisco website but it don't have....
Please let me know if you know this ...:)
best regards,
Rechard

There's a quick reference book for SNAF. You can find it on the cisco press website. There's also an older book called "Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security Appliance". It's from 2005 but it's usefull.
After CCNA I'd recommend you to pass CCNA:Security before you take SNAF. It's needed both for ASA Specialist and for CCSP.
Good luck

"not-so-secured" network with Airport.

Hello everybody.
(Sorry for my english, i am a belgian user)
As i have no Wi-Fi modem, I recentltly created a secured wi-fi network with my Mac Mini to connect easily my ipod touch and family's computers. I used Airport and "create new network" tool. All works perfectly and i am very happy with this.
The problem is when i reboot the Mac Mini. As soon as Leopard is started, it create a new UNSECURED wifi network, so all the people in my flat can connect my network, access the printers and shared docs ( i didn't protect them to let an acces to all my family and friends that come home)
I have to stop Airport at the boot of MacOS to stop the unsecured network and then create a the usual secured network...
This is a big problem for me and i really would like leopard to remember my network and parameters (password) to have the same wifi network each time i boot up my Mac.
I think that a Mac that create an unsecured network at the startup is a big lack of securit ( or i din't find the correct option???)
Thank a lot for all your help
C.V.

You mean, you enabled Internet sharing in System preferences, Sharing.
Well, I would not be so sure that such a connection is secure, mainly because WEP is the only algorithm available with that kind of network.
That said, I tried it a couple of times and it works very well, but I never used it as a long stand solution. So I cannot say if the behaviour you described it's normal.

Cannot access shared external hard drive with other mac accounts

I cannot access a shared external hard drive with other mac accounts (all accounts are on the same macbook Pro). The shared external drive is shared via time capsule and is connected (of course) in USB. I see well this external hard drive as a shared disk with my main account. Yes shared option has been activated with the Airport Utility .. but when I open other account these othe accounts can see the external drive but cannot access to its content that is flagged with a no way sign. Strangely enough when I close my main account and start opening a new session with one of the other account then fine I can access the external hard drive and its content .. BUT then it is from my main account than I cannot access its content the no way sign showing ..
Looks like only one account at a time can access the content of this SHARED external hard drive .. any one as an idea on how to really make it a shared hard drive so that all accounts on the same mac can also access it ? I am at my wit ends on this case. THANKS ..

Results of my enquiries at Apple Genius Bar .. the guys found the problem interesting. They've been unable to provide a fix neither to give any explanation as to the reason why. To be fair I was not much impressed by the technical level demonstrated ..
In the mean time I have found that if account no.1 can see the shared external drive content and in such case account no.2 (same Mac computer) cannot see its content (only the external HD with a no way sign) this account no.2 can UNMOUNT (by ejecting) this external HD from account 1 and then remount it (just clicking on the TC shared part in a finder window) and .. see and access its content ; whilst account no.1 cannot see its content anylonger. Unless it unmounts the shared external HD and remount it .. then account no.2 can see its content anylonger. This can goes on an on.
So eventually YES the TC can allow to share a USB external drive between several accounts and a same Mac .. BUT this require to unmount and remount EACH time the external drive is accessed from a "no.2 account". So OK to share files with seldom access but not practical in case of frequent access needed.
I just I have now to figure how iTunes can automatically unmount and remount a shared external HD when it needs to access one of this shared HD content from on time account no.1 and then next time from account no.2. May be I am asking too much ..

Macbook not access work or home networks with wep key

I have just purchased a Macbook. It is to be used for work and home purposes. The work network is a given, and can not be changed. It requires a wep key that is 26 charcters long. When I input this via the Network instructions on my Macbook, it is not recognized. I have tried putting the prefix '$' in front, and '0x', and '0X' and placing in '"' (double quotes) and NO LUCK! I can't get into the network. This is no issue with multiple Windows PC's that I have. I can also access via pocket PC, and Cingular 8125 smartphone, but not Macbook.
At home, I can not access my network, a 2wire router, without disabling the wep key. Not acceptable. I have 2 Windows PC's that work fine on this network, with a 13 character wep key. Have tried the $ and all the other hints and no luck.
Suggestions please! I purchased this Macbook to be able to show that it could be a more reliable and productive machine, working in the office environment. So far, can't get into the office environment!
Thanks
Macbook Mac OS X (10.4.6)

Ok, some progress, but not in yet. I was able to "connect", but have no Internet connection. On the "Network Diagnostics", I have a green light for "AirPort", "Airport Settings", "Network Settings", BUT I have a red light for "ISP", "Internet" and "Server". I checked by "Sharing" settings, and have the Firewall On, since I know that the company requires such (tried with it off, and same status). Are there some ports I need to open? What other steps do I need to take to get beyond "connected" and really access the internet??
Thanks,

CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD

CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

Cannot access itunes store? network connection?

Out of nowhere I cannot access itunes store due to error message "itunes could not connect to itunes store. The network connection timed out."
New ipod touch has been recently added for a total of 2 devices. Itunes store has worked perfectly last three days. Help!
Message was edited by: eornom4

HI EVERYONE!!!
I have a new Nano, and for the past few days I have no been able to connect to the iTunes sztore. The message on the screen says I have to check my network connections and try again. Last successful sign in was 18th Dec.
Any help or tips much appreciated
Thanks

Cannot Access Time Capsule or Computer with MobileMe enabled

I have back to my mac set up on my imac but when I connect to a different wifi or tether my phone I cannot access the Time Capsule or Back to my Mac I'm 100% it is set up right this is getting really annoying for an Apple product. I have comcast if thats of any help.
Share disk over wan checked and allow setup over wan but still no dice. I tryed the dyndns way and it configured the dns for my domain I let it use but then it still wouldn't work so I just cancelled that and came back to square one.

Need a bit more info.
Now this is what happens when I plug it in:
Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
It sounds like you have not done the setup.
The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

HT201413 I cannot access any of my music with my Windows 7 PC after I update iTunes. I keep getting the error message " The song 'ABC' could not be used because the original file cannot be found. Would you like to locate it?", for the 1800 songs that I h

My music library worked fine on my new PC until updated iTunes software. Now I cannot access any of my music anymore. What's happening here?
Any help would be greatly appreciated.
Thank you,
Lisa

Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
tt2

Cannot access my own secure network with G4 iBook

Similar Messages

Maybe you are looking for