Cannot access my WD NetCenter since updating to Snow Leopard

Hi there,
I'm updating the OS on both of my MACs. Since I have updated to Snow Leopard I can no longer access my WD NetCenter external drive, but I can on the MAC which has the previous version 10.5.8 Leopard. I can see the wd-netcenter in my SHARED location. When I try to access it I get ....The operation can’t be completed because the original item for “Common” can’t be found.
I've been on NetCenter's support pages and can't find a solution. If anyone has one I'd appreciate it.
kind regards
Robert

Hi sanjampet,
It doesn't show-up on my desk-top; but it does appear in my Finder window. It appears as wd-netcenter under the SHARED location.
I select wd-netcenter to access the netcenter, it then shows all of my folders within the netcenter, but when I select the Connect As.. button, regardless of who I log in as or with what permission the following message appears: The operation can't be completed because the original item for "folder name" can't be found.

Similar Messages

TS1398 Cannot access my wifi network since updating to OS7

I cannot access my wifi network since updating to OS7. Need wifi to make any changes - even to update for bug fix - help!!

Try power cycling your router. Un plug it, count to 20, plug it back in and let it reboot.
You can also try going into your iPad and 'reset all network settings'.

'Open Recent' Not Working In FCP 6 Since Updating To Snow Leopard

Yes, I new I shouldn't of updated to Snow Leopard until they ironed out some wrinkles first, oh well.....
Anyway, I have noticed since updating the 'Open Recent' doesn't seem to work In my FCP 6, I remember Logic Pro doing the same thing a few years back and the word was to bin some kind of preference file?
Any ideas, Cheers

Instructions for Final Cut Pro 6. This might have changed in FCP 7.
Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. If you have further problems, the backup can be recalled and you can continue working.

Safari 4.03 don't start since update to Snow Leopard

I've just updated to Snow Leopard and now i have an error message when i want to start Safari 4.03 if i translate it in English :
"Impossible to open this version of Safari software with this version of Mac OS X.
You have Safari 4.0.3"
Did somebody have a solution ?

1. perform a software update, if it finds any go for it
2. if number 1 does nto apply, just reinstall your safari so you have to delete
Safari application
Safari receipt can be found in /library/receipts
safari plist
safari folder from /library/safari
trash the above items. insert your snow leopard disc then do an optional install.

Cannot connect to any IM clients since updating to snow leopard.

Hey Guys
I'm having a problem with my IM clients since updating to 10.6. I use Adium primarily and have Microsoft messenger through Office 2008 installed. Every time I try and connect to the servers I get a message in Adium telling me it has a connection error and Microsoft Messenger tells me I am not connected to the internet. I have tried other clients such as Pidgin and have the same issues and my MSN still works on my windows desktop. I am absolutely stuck with what to do. Adium support says that as it doesnt work on Microsoft messenger its nothing to do with them and its a issue on my side :S.
Any help is appreciated.

Thanks for responding guys. I looked to see if their was a firewall option somewhere I could disable or make a exemption for but came up with nothing. Today I reinstalled snow leopard again and every thing seems ok now. I really am not sure what the problem was.
Thanks for your help anyway. this could help others in a similar situation.

Cannot access safe boot for Mac Air running Snow Leopard any suggestion please?

Mac Air - Mid 2011 (79gig free space). Running Snow Leopard 10.6 + all updates installed to-date. Last update was iTunes 98m file which was installed 4 days ago.
Unit has progressively slowed up, starting with intermittent freezing of cursor, which appears to have started not long after connecting iPhone 5 running current iOS.
Have accessed Safe Boot and ran drive utility check, all ok.
Received error message after drive check stating, "(AppleUsbEthernetHost.text) incorrectly installed".
Have subsequently tried accessing Safe Boot again to try and reset permissions, but can not access as unit constantly freezes at Login page.
Have followed Apple support recommendations to access Safe Boot, but to no avail.
Have seen forum references to the above error relating to iOS mobile devices causing problems with earlier versions of iTunes updates.
Any suggestions as to how to proceed from here would be appreciated ?
Ivy

I suggest you backup your files, if possible, then do the following:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstall your third-party software from the original media. Restore your data from the backup.

Movies won't play since update to Snow Leopard.

After updating from Tiger to Snow Leopard I can no longer play movies in iPhoto, I double click the movie but nothing happens. I imported one to iMovie & it plays OK there so what has gone wrong in iPhoto?
Any help would be appreciated, thanks.
Carol.
Wippitwalker

Greetings Carol,
Take a look at this article from the Apple website: http://support.apple.com/kb/TS3003
Hope that helps.

Cannot print to wireless Epson since upgrading to Snow Leopard 10.6.3

HELP! Never had a problem before with Tiger! I reinstalled both Snow Leopard and printer. It will print a test copy after printer installation, but not from the Mac. I've tried printing a photo and document. Also, I lost my paper presets - can't find the photo paper!

The first thing to do is run Software Update until there is no more software to install. You should be at 10.6.6, and have all the printer updates installed. Once that is done, try resetting the printing system and reinstalling the printer. Then check that your driver is the proper one by seeing what it says in Options & Supplies. If it is not a driver from Epson, see if you can choose it manually there.

Cannot access pacman man page since update...

Okay, so I just updated pacman to 3.1.1-1, and I can't access pacman's man page. I checked and found that the page does exist on my system (I think, /usr/man/man5/pacman.conf.5.gz and /usr/man/man8/pacman.8.gz both exist). When I try execute 'man pacman' it just tells me "No manual entry for pacman". Oh, and I also tried manually specifying the section.
Any idea what's going on here?
Last edited by fflarex (2008-01-22 02:10:45)

Allan wrote:
zodmaner wrote:Anyway, since only x86_64 have this 'problem', should we file a bug report on this?
No, it a known problem with the transition of man pages to FHS compliant locations.
So that means the proper location of the man page is in /usr/share/man instate of /usr/man? Does this means that the man page for i686 version of pacman will eventually be moved to /usr/share/man too?
Last edited by zodmaner (2008-01-23 08:30:14)

Pages 09 not printing graphics since updating to snow leopard

I've updated to 10.6.2 but I am unable to print templates with graphics to my Xerox 6520 DP printer. Reloaded the drivers but still not working. Will go ck with Xerox to see if they are issuing a new release driver or not. I tried opening a template within Pages and I get the same result of "error printing" no number along with it. Tried doing a save as PDf and get the same printing error. Anyone have any ideas?

Repair permission is something I do after a major installation. Do that.
Are you able to print from other applications, i.e. TextEdit?
If not, can you print from another account? You can create a new account from Accounts in the System preferences.
It might be the driver that needs an update but that is outside my knowledge.

DNS odd problem since updating to snow leopard

Basically, I can't resolve hostnames on my local network except using dig. Here is an example:
+mackbook:etc mattboswell$ dig gateway+
+; <<>> DiG 9.6.0-APPLE-P2 <<>> gateway+
+;; global options: cmd
+;; Got answer:+
+;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 7203+
+;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0+
+;; QUESTION SECTION:+
+;gateway. IN A+
+;; ANSWER SECTION:+
+gateway. 0 IN A 192.168.44.1+
+;; Query time: 4 msec+
+;; SERVER: 192.168.44.1#53(192.168.44.1)+
+;; WHEN: Thu Oct 15 23:25:12 2009+
+;; MSG SIZE rcvd: 41+
Ok, that works. But this does not:
+mackbook:etc mattboswell$ ping gateway+
+ping: cannot resolve gateway: Unknown host+
I know this is probably something simple but I'm not sure where to look.
Thanks,
Matt

Ok, this is odd. There are names on the .local domain that I can resolve just fine, and others that I cannot. Example, there is a host called divaplug (it's a sheevaplug) that I can resolve ok, ssh divaplug or ping divaplug work just fine. There is another host called ubuntu-dev that will resolve with dig but ping or ssh require the trailing . to resolve.
+dig ubuntu-dev+
+; <<>> DiG 9.6.0-APPLE-P2 <<>> ubuntu-dev+
+;; global options: cmd
+;; Got answer:+
+;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43940+
+;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0+
+;; QUESTION SECTION:+
+;ubuntu-dev. IN A+
+;; ANSWER SECTION:+
+ubuntu-dev. 0 IN A 192.168.44.133+
+;; Query time: 4 msec+
+;; SERVER: 192.168.44.1#53(192.168.44.1)+
+;; WHEN: Thu Oct 15 23:54:46 2009+
+;; MSG SIZE rcvd: 44+

Can't open or start new projects in Logic after updating to Snow Leopard

I've been having a few problems with Logic 9 since updating to Snow Leopard (10.6.8 ) a couple of days ago.
Every time i click on "new" and try and start a new project - logic freezes and i get the rotating circle sign and Logic stops responding - eventually i need to force quit and start again.
Existing projects seem to be functioning fine, although slightly slower than before.
Does anyone have any fixes for this?! Not being able to start a new project is quite a big problem!
Thanks
Mac Pro, Mac OS X (10.6.8), Logic Pro 9.1.8 (32 BIT)

The mistake was trusting only TimeMachine as your backup/restore.
If you had your users files also backed up to a external storage drive, or used a bootable clone (since they can be directly accessed) then you could have recovered just your files.
This is what I suggest you do since TM apprantly botched things.
1: Visit my user tip here and attempt to fix Snow Leopard in place, the purpose here is to get a booing machine so you can use a working Admin account to copy the user folder containing your files to a regular external drive.
I suggest #8 and #6, this will reinstall OS X over itself to fix it, then reset the User Password so you can hopefully log in.
..Step by Step to fix your Mac
2: This method will also work, you install Snow Leopard onto a extenral drive and boot from it. This is probally a more safer choice than above, it's certainly less work, but it needs a blank external powered drive.
.Create a data recovery/undelete external boot drive
3: Once a copy of your users files is off, then your free to revert your machine back to Snow Leopard.
The ENTIRE drive must be selected and erased, to set the GUID, erase the RecoveryHD and EFI partitions.
How to erase and install Snow Leopard 10.6
Read this to see how OS X 10.7+ changes the User/Library folder, thus can't be used with Snow Leopard.
How to revert your Mac to Snow Leopard
How to revert OS X back from Mavericks
Later read
Most commonly used backup methods
Make a bootable clone of your boot drive

Can't open new project in Logic after updating to Snow Leopard

I've been having a few problems with Logic 9 since updating to Snow Leopard (10.6.8 ) a couple of days ago.
Every time i click on "new" and try and start a new project - logic freezes and i get the rotating circle sign and Logic stops responding - eventually i need to force quit and start again.
Existing projects seem to be functioning fine, although slightly slower than before.
Does anyone have any fixes for this?! Not being able to start a new project is quite a big problem!
Thanks

opened from the tool bar and also directly from applications. Any more suggestions?
Can you start a new project, or are you saying you cannot launch DVD SP at all? If the later try deleting the preferences (since you are on the road, make sure you copy the preferences to someplace in case something goes wrong.) If it is the former, you may not be ablle to open the existing project if you took all the steps of clicking cancel etc., though the deleting preferences could possibly help if the preferences are corrupted and causing an issue when you are trying to skip files. (Would not count on that one though.)

Updated to snow leopard. Printer no longer turning on.

Since updating to Snow Leopard, my printer (an HP DeskJet 5550) no longer turns on when I print over my wireless network via Airport Express. Not sure if this has something to do with the Express, Snow Leopard, or something else.
Any thoughts?

I am having the same problem with an HP Laserjet 1150 connected to my Airport Extreme.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

Cannot access my WD NetCenter since updating to Snow Leopard

Similar Messages

Maybe you are looking for