Cannot access networking settings in browser

Well, it is now December 8th, and no one has been able to tell me why I cannot access my printer's Networking information from its web page (in my case, the URL is http://192.168.2.123). I receive the following message:
The server 192.168.2.123:80 at HP Printer Networking@ requires a username and password.
Below that are two fields, one for a username, the other for a password.
I have tried the usual variety of username/password combinations with no success. What's going on here? Why am I being asked for a username and password when I never set them up to begin with? Why is HP silent about this? I asked about this way back in April. I really need an answer.
This question was solved.
View Solution.

Hi,
Try the following.
Username        admin
Password         just leave this blank
Username        root
Password         just leave this blank
If this doesn't work try Admin for the username and again just leave the password blank.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

I cannot access the settings tab in the management console

I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?

collado144 wrote:
I am in the management console for my verizon d-link router and i cannot access the settings tab..
i got to the router/verizon management console via the default gateway ip address and used the default password which worked and then tried to access settings which im assuming is the same default password.. however when i try to use the default password on the settings tab when im prompted it says that it is wrong.
is there some different password for the settings tab?
Have you tried to go here and select your Gateway, then follow the trouble shooting tips. Most gateways/routers default passwords at one point were changed to the serial number for security reasons. If that does not work, you may try resetting the gateway/router to get back to the default. Never leave your gateway/router with the default passwords. If you get into the gateway/router a Verizon firmware upgrade if it is a Verizon model, may even change the default password to the serial number so it is not the standard D-Link that is used with all their gateways.
DSL help.
http://www.verizon.com/Support/Residential/Internet/highspeedinternet.htm
The DSL Gateways can be found here.
D-Link 2750B Gateway?
http://www.verizon.com/Support/Residential/Internet/HighSpeed/Networking/2750BGateway/ATLAS6561.htm
There is a wealth of online information also available here.
http://www.verizon.com/Support/Residential/Internet/fiosinternet.htm

I am trying to download itunes and keep getting an error message cannot access network location %appdata%

I am trying to download itunes to windows 7 and keep getting the error message "cannot access network location $APPDATA%\." I have contacted an Apple advisor and was not able to resolve the problem. What to do?

Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
https://discussions.apple.com/community/itunes
B-rock

Unable to install/uninstall iTunes. "Cannot access network location"

I am unable to install a new version of iTunes. I receive an error message saying "Cannot access network location: []" where there [] is an Asian character. I receive the same error when trying to uninstall iTunes as well. Can anyone offer help?
The following is a link to a screenshot of the error message:
http://imageshack.us/a/img855/47/32734805.png

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

TS3274 cannot access my settings, each time i try to access my settings, screen goes black.

I cannot access my settings, each time i try to access my settings, screen goes black.

You may want to try from A to D.
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(C) Reset all settings
Settings>General>Reset>Reset all settings
(D) Restore iPad
1. Connect your device to your iTune (computer).
2. Select your iPad when it appears in iTunes.
3. Select the Summary tab.
4. Click the Restore button.
Note: Data will be lost

HT1766 I cannot access my settings from my iPhone. Is there a way to manually enable the backup from my iMac?

I cannot access my settings from my iPhone. Is there a way to manually enable the backup from my iMac?

I don't quite understand why you can't access settings on your iPhone. You can back up your iPhone to your computer by connecting it to iTunes on your computer.

Locked down computer (means I cannot see network settings) allows IE6 but Firefox always times out.

The tech guys have locked down the computer and I cannot see the network settings and have no access to the registry. Firefox always times out so I am forced to use IE6. How to set up Firefox to get round this?

Presumably, you're talking about your company's administrator. It probably wouldn't be wise to try and circumvent their network policy. It might get you fired even.
A better idea would be to show them how insecure IE6 is - ''it's no longer supported by Microsoft for example and exposes their network to all kinds of attacks'' - and that it's in their own interests to use a secure browser like Firefox 4.0
Maybe they'll even promote you!

HP Office Jet 6000 E609n Printer, Cannot reset network settings.

Hello,
I was setting up a static IP address for the HP Office Jet 6000, upon attempting to set it up. I forgot to set the default gateway to match the IP address. Now that it is set that way I cannot access the GUI for the printer. I have tried doing the reset by holding down the wireless button and pressing resume three times. I have literally unplugged it from the back and from the wall and that did not resolve the issue. Also, unplugged it and waited 30 more seconds plugged it back in and did the button reset a swell. Noone of these resolved anything I am stuck and cannot even access the controls to change the router. Help will be very much appreciated.

You may try and do the network defaults and the factory defaults on the printer and that should reset the ip address for you. I'll try and see if i can get the combination for you for this printer. Let me know if this works or if you are still not able to get into your settings.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Cannot access Siebel application through browser

Hi,
We have installed Siebel demo quickstart SIA 8.1.1 in one laptop.The Siebel application works fine. The only problem is that we cannot access the Siebel application through a browser. We have to launch the Siebel application from Windows program menu.We need to set up the Siebel application so that we can access it through IE browser. There are some settings that need to be set up in the .cfg files to make the application available trough Internet Explorer.
We have already tried using the url http://servername:8081/callcenter_enu/start.swe? But it returns "page cannot be displayed". We are accessing the application from the host computer.
Regards
CP

Are you able to connect with dedicate client?
if yes, then you just to need to verify setting/configuration for web server. Which can be found in installation guide.
Also could you please share logs. Error you are getting is quite generic and have multiple symptoms.
Have you tried to search on Oracle Support. There is complete article available for this error.
Regards,
Rajesh Kumar

Wifi clients get an address but cannot access network

Hello,
I have setup 1131 AP's which connect to a wlan controller 2106
The dhcp server is a windows 2003 server. All equipment is connected to inside lan, no vlans have been configured.
AP's are normally associated and wifi clients get an ip address from the windows dhcp server.
Strange thing however is that when you are connected to the wifi, you cannot access anything. Dns is configured properly and even when you enter an ip address of a website, I cannot reach it.
I have no idea what can be wrong. Is it that we use internally a 172.16.x.x /16 range and the wlan controller uses 172.16.2.x for both ap as management interface and the dhcp scope is 172.16.5.x /16. Same subnet.
Anybody a clue?
Thanks and regards,
Ralph Willemsen
Arnhem, Netherlands

Hello Scott,
This is the running config (changed company name to 'company')
config sysname Cisco2106
config location expiry tags 5
config time timezone location 14
config load-balancing window 0
config interface address management 172.16.2.39 255.255.0.0 172.16.2.254
config interface port management 1
config interface dhcp management primary 172.16.1.7
config interface dhcp service-port enable
config interface address virtual 192.168.222.254
config interface address ap-manager 172.16.2.40 255.255.0.0 172.16.2.254
config interface port ap-manager 1
config interface dhcp ap-manager primary 172.16.1.7
config 802.11b cac voice sip codec g711 sample-interval 20
config 802.11b cac voice sip bandwidth 64 sample-interval 20
config 802.11b 11gsupport enable
config auth-list ap-policy ssc enable
config auth-list ap-policy mic enable
config auth-list ap-policy lsc enable
config logging console warnings
config logging console 4
config logging traceinfo disable debugging
config logging buffered notifications
config logging buffered 5
config mobility group domain "company"
config mobility group member add 00:00:00:00:00:00 172.16.2241 RF_company
config nmsp notification interval rssi rfid 2
config msglog level warning
config 802.11a cac voice sip codec g711 sample-interval 20
config 802.11a cac voice sip bandwidth 64 sample-interval 20
config 802.11a disable network
config database size 512
config dhcp proxy disable bootp-broadcast disable
config network rf-network-name "company"
config network ap-mcast-mode multicast 224
config network multicast mode multicast 224
config network otap-mode enable
config country NL
config rfid timeout 1200
config rfid status enable
config rfid mobility pango disable
config mgmtuser add encrypt admin 1 b56d213abcxxxxxxxxxxxxxxxxx2 75ca55720920f69dad20d8c1aee6b0ffa8e005af 16 f569db123c03d8c62ab3c11c8e31f60b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 read-write
config wlan session-timeout 1 0
config wlan dhcp_server 1 172.16.1.7
config wlan exclusionlist 1 60
config wlan wmm allow 1
config wlan mfp client enable 1
config wlan broadcast-ssid enable 1
config wlan interface 1 management
config wlan create 1 company "company"
config wlan apgroup add company company
config wlan apgroup description company company
config wlan apgroup interface-mapping add company 1 management
config wlan security wpa wpa1 ciphers tkip enable 1
config wlan security wpa wpa1 enable 1
config wlan security wpa wpa2 ciphers tkip enable 1
config wlan security wpa wpa2 ciphers aes enable 1
config wlan security wpa akm 802.1x disable 1
config wlan security wpa akm psk set-key hex encrypt 1 3d943b0edb82b2f94b183a9f0099b8d7 724fe9f09921d471b36d7451d4f3f5f941aceecb 48 919d3a5b5aa1b2add548add84850a2140f635bf3a65e54ebfb1528a6e91954804e595cfc03415ded89272776cd9f914e000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 1
config wlan security wpa akm psk enable 1
config wlan security wpa enable 1
config wlan enable 1
config advanced 802.11b channel add 1
config advanced 802.11b channel add 6
config advanced 802.11b channel add 11
config advanced 802.11b channel load disable
config advanced 802.11b channel noise enable
config advanced 802.11b channel foreign enable
config advanced 802.11b receiver pico-cell-v2 rx_sense_thrld 0 0 0
config advanced 802.11b receiver pico-cell-v2 cca_sense_thrld 0 0 0
config advanced 802.11b tx-power-control-thresh -65
config advanced probe limit 2 500
config advanced 802.11a channel add 36
config advanced 802.11a channel add 40
config advanced 802.11a channel add 44
config advanced 802.11a channel add 48
config advanced 802.11a channel add 52
config advanced 802.11a channel add 56
config advanced 802.11a channel add 60
config advanced 802.11a channel add 64
config advanced 802.11a channel add 100
config advanced 802.11a channel add 104
config advanced 802.11a channel add 108
config advanced 802.11a channel add 112
config advanced 802.11a channel add 116
config advanced 802.11a channel add 120
config advanced 802.11a channel add 124
config advanced 802.11a channel add 128
config advanced 802.11a channel add 132
config advanced 802.11a channel add 136
config advanced 802.11a channel add 140
config advanced 802.11a channel load disable
config advanced 802.11a channel noise enable
config advanced 802.11a channel foreign enable
config advanced 802.11a receiver pico-cell-v2 rx_sense_thrld 0 0 0
config advanced 802.11a receiver pico-cell-v2 cca_sense_thrld 0 0 0
config advanced 802.11a tx-power-control-thresh -65
config advanced probe-limit 2 500
transfer download path \/
transfer download filename cisco2106-config
transfer download serverip 172.16.5.4
transfer upload path \/
transfer upload filename cisco2106-config
transfer upload datatype config
transfer upload serverip 172.16.5.4

TS3899 Help! I cannot access my settings and facebook settings within 'Settings'. This means I cannot change passwords, delete or add email accounts. I've tried updating and restoring my phone but to no avail. Can anyone help me please?

Can anyone help please? I cannot access my email account settings within 'Settings', so I cannot change my details for existing email accounts, nor can I delete them or add others.
I can't access my Facebook settings within 'Settings' either but when I try to use the app it asks me to enter my password into my Facebook account in settings, but I can't do that either.
I've updated my software, restored and backed up my phone but it still doesn't work. Troubleshooting doesn't cover this.

Go to Settings>General>Restrictions. Do you have restrictions on? If so, that would prevent you from making changes in some areas of the iPhone.

Internet stopped working. Can't access Network Settings.

Hi,
So I start up my IMac G3 this morning and I can't access the Internet.
I can't even get to the Network Settings, in System Preferences. It just frezzes up.
Im running 10.2, but I tried upgrading to 10.3 and it keeps frezzing up.
Everything else works fine. Any ideas, suggestions. If I try to re-install 10.2 will I have to format the drive or will it just install over the existing OS?
Appreciate any help or advice.
Thanks,
Mike A.

Ok. I tried the Disk Permisions already and still nothing. I'll try creating a new User and let you know what happens.
Also, I was going through my HD and deleting things to free up more space. Than I tried upgrading to 10.3. So far the upgrading is working. Not sure if that will fix my Internet connection either.
Strange how it would'nt upgrade with 3.5 gigs but would with 7 gigs free.
Thanks,
Mike A.

Cannot connect to wifi, cannot change network settings [SOLVED]

Asus EeePC.
lspci -k shows
Broadcom Corporation BCM4313 adapter is the hardware, and appears to be working. Kernel driver in use is bcma-pci-bridge
In Gnome, Wi-Fi status shows "not connected"
"Select Network" shows a list of available APs, I click on ours which is set up as WPA2 PSK. Click Connect. Nothing happens. At all, no dialog for password, no attempt to connect seems to be processed by the computer. This happens with open networks as well (coffee shop or whatever). Click connect but nothing further happens.
From the applet I can't even seem to be able to "Turn off" the WiFi at all.
From within Wi-Fi settings in the applet, I can see a list of available access points but clicking on them does nothing. There is no available way for any user input, although I can click the toggle to turn off Wi-Fi from within there.
I can't forget networks in my history here either: click "History" and I can see a long list of previous networks. I can check box for them all and say "forget" but then they're back when I open the history again.
So it seems like my NetworkManager is just simply not working. Can't change the current state of "not connected" to anything at all.
When I attempt to connect using Wifi-menu I get:
Successfully initialized wpa_supplicant
>WPA Authentication/Association Failed {FAIL}
When I attempt to connect to any network. It never asks for password.
Gnome-Keyring is installed.
Netctl is NOT installed.
NetworkManager is installed and running according to systemctl
I've been running this Arch install on this machine for two years. This is not a new install problem. No hardware can be changed on this machine, so it's not hardware related (unless the wireless device itself crapped out).
Possibly related, I cannot shutdown the machine from within Gnome. I have to "sudo shutdown -h now" from a terminal. Seems to hibernate/sleep properly when the lid is closed though.
All of the results of searching on this indicate usually the problem is multiple network config softwares installed at the same time, like netctl and networkmanager together. Or not having a keyring manager installed That is not the case here unless it is one of those that is broken, but they don't seem to be.
I have no access to any wired connection at the moment at all, so I can't download anything to this computer at the moment. There's gotta be a way to get wifi working again, as it was just working last week. Haven't even done a pacman upgrade between when it last worked and when it stopped working.
Last edited by hooya (2014-12-02 15:20:20)

I did mention the hardware is a Broadcom BCM4313
It may have been an issue with the Broadcom not working with iw. Not sure, as I haven't really changed things on this machine much (it's my wife's and I regularly update it but don't fuss with it much beyond "get it to work"). Like I said, the install is 2 years old, so compatibility may have even changed since I initially set it up.
I'm currently at work and without direct access to the computer in question. So I'll get those results later tonight.
Last edited by hooya (2014-11-03 19:02:03)

Cannot access network shares on AD domain

I've joined my mac to an AD domain (over vpn tunnel). I used the Directory Access app and when I did a "bind" to the domain all seemed to go well.
However when I try to access a network share using the "Connect to Server" menu item:
smb://server/share
I get this error:
The Finder cannot complete the operation because some data in...could not be read or written. (Error code -36)
Ok I've tried googling this error message. Could someone tell me what this means? Could you point me to documentation on how to do what I'm doing?

Can you access the share while in the office?
Can you access the share by using the servers IP address instead of name?

Cannot access network shares

After upgrading my wife's Mac mini G4 to Tiger she cannot connect to network shared drives. When clicking on Connect on a network machine I get the message that the alias could not be opened because the original item cannot be found. I have the option to delete the alias or fix it. When trying to delete it I am told that I do not have the required permissions for the operation. When clicking on fix alias I get the Finder browser, I don't know where to browse to.
Any help will be appreciated.
BTW, I am a recent switcher so not very clued up with OS X yet.
Cobus

have you the same problem?
http://discussions.apple.com/message.jspa?messageID=4689867

Cannot access networking settings in browser

Similar Messages

Maybe you are looking for