Cannot access report attributes for editing

I have a report/form combination. It's been working fine (both editing and running). I have made some changes to the report region definition source, successfully applied them, and they work as expected. However, I cannot (since yesterday, though it was fine before) access the report attributes. In the page definition, if I click on the 'report' to edit the report columns, I get an Internet Explorer error that the page cannot be found. Same thing if I try to access the report attributes by editing the region (the region definition and print attributes are fine, only the report attributes are inaccessible).
I thought I'd start over, just to see if that helped. I created a new report/form combination on the same table, and on this new report I still cannot access the report columns.
Has anyone seen this problem before?
thanks,
Carol

Please ignore this; the issue was needing a patch to handle a bug.

Similar Messages

ORA-6502/6512 when trying to access report attributes

Hello:
Getting page failure when trying to access report attributes tab on report region.
Apache logs says:
[Fri Mar 5 05:39:41 2010] [error] [client 192.168.111.6] [ecid: 1267785581:150.
150.1.38:25452:0:36567,0] mod_plsql: /pls/apex/f HTTP-404 ORA-06502: PL/SQL: num
eric or value error: character string buffer too small\nORA-06512: at "FLOWS_030
100.F", line 279\nORA-06512: at line 22\n
[Fri Mar 5 05:41:01 2010] [error] [client 192.168.111.6] [ecid: 1267785660:150.
150.1.38:25567:0:36585,0] mod_plsql: /pls/apex/f HTTP-404 ORA-06502: PL/SQL: num
eric or value error: character string buffer too small\nORA-06512: at "FLOWS_030
100.F", line 279\nORA-06512: at line 22\n
Any ideas?
Thanks

Hi,
Could you please try the following test:
This error message appears because the Connection Server is down or disabled. To start or enable the server perform the following steps:
1. Go to Start > Programs > BusinessObjects XI > BusinessObjects Enterprise > Central Configuration Manager.
2. Verify the Connection Server is started with a status of running.
3. Highlight the Connection Server and click the 'Start' button if the server is stopped.
4. Click the 'Enable/Disable Servers' button, log on, and verify there is a green up arrow next to the Connection Server.
5. Click the check box for the Connection Server and 'OK' if there is no green up arrow to enable the server.
Regards,
Deepti Bajpai

Cannot access exchange attribute from java

I have tried to access pwdLastSet attribute for a particular staff inside the Active Directory 2008, works fine. However when I try to access msDS-UserPasswordExpiryTimeComputed I get null pointer exception. The value associated with this attribute is available. Infact I am getting error for all msxxxx fields. I am unable to understand why I cannot, access these attributes.
Attribute attr=attrs.get("pwdLastSet"); ---> works fine
//Attribute attr=attrs.get("msDS-PrincipalName"); ---> throws an exception.
Would appreciate help to resolve my problem.

//Attribute attr=attrs.get("msDS-PrincipalName"); ---> throws an exception.If that throws a NullPointerException it can only be because attrs is null. Or else you need to post the stack trace here.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Using NIK software...LR5 said it cannot prepare the file for editing

I have reimported photos from my backup HD (Lacie) into LR5. After selecting a photo in LR5 I attempted to edit using NIK software...LR5 said it cannot prepare the file for editing?
Message was edited by: Geoff the kiwi
Changed title to reflect query

Is there a question mark icon next to your photo?
What is your operating system?
Which NIK Software?

Sign out of one itunes account and sign into another seperate account on same macbook. Cannot access itunes library for 2nd account

Sign out of one itunes account and sign into another seperate itunes account on same macbook. Cannot access itunes library for 2nd account. How do I do this?

iTunes account is not the same as iTunes library.
iTunes account is what you use to purchase from iTunes.
iTunes library is what is on your computer.
You can have items from multiple iTunes accounts in one iTunes library.

Cannot access itunes, asks for Safari upgrade

As of today I cannot access the itunes store! It says I need version 4 or later for safari.
My Macbook was upgraded to Leopard with a work licence years ago. When I checked the software version of this mac it says 10.5.
Safari is 3.0.4.
I downloaded the leopard update for Safari, but cannot use it. It says this
"You cannot install Safari on this volume. This update requires Mac OS X 10.5.8 or newer."
This is leopard isnt it?
I always have problems installing updates, don't know why, but never bothered me as didnt stop me from doing anything until now.
Any ideas how to fix this?

Aromagician wrote:
How do i check what version 0f 10.5 I am on.
click on the  menu at the left side of your menu bar and choose +about this Mac+
When I click on the software it just says 10.5. Perhaps this version needs to be updated to a lesser version first?
no, the combo updater will update any version of 10.5.x to 10.5.8.
when was the last time you repaired permissions ? did you do any maintenance at all ?
i suggest you run disk utility (in your applications > utilities folder) and click on +repair permissions+. does it report anything out of the ordinary ?
if disk utility reports that it +finished successfully+ or so, restart your Mac and re-download the combo updater. double-click on the .dmg file to mount the disk image and run the installer. your Mac will re-boot after the install is done. run another +repair permissions+ using disk utility.
also, you might want to download and install OnyX, which is +a multifunction utility for Mac OS X. it allows you to verify the Startup Disk and the structure of its System files, to run miscellaneous tasks of system maintenance.+ let OnyX run the maintenance scripts once a month.
you can get the Leopard version of OnyX here.
good luck !

HT3204 Cannot access the server for iTunes error

Cannot access iTunes server

After trying everything under the sun including emailing iTunes Store support, and uninstalling and reinstalling iTunes with NO success, I finally got it to work!!!
I uninstalled NetBarrier which I had recently installed and VIOLA! I can now access my Wish List and other iTunes Store items I had problems with. Hopefully, it is this simple for the rest of you.
Message was edited by: Trend53

BIB-7000 Cannot access X Server : For only Graphical Dashboard

Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.

oracle0282 wrote:
Version : 11.5.10.2
There is abnormal behavior only for graphical dashboard. However, PDF reports are running fine completion with no error.
pls advice what is the caused of this issue.What is the navigation path?
Please also see these docs.
11.5.9/11.5.10: Account Manager Dashboard Error: "You Have Encountered An Unexpected Error" with Exception Error: "Java.Lang.RuntimeException: BIB-7000 Cannot Access X Server" [ID 390519.1]
'BIB-7000 Cannot access X Server' Error Clicking on Details Button in Compensation Workbench Approvals Task [ID 558420.1]
Opening Reporting Page (Tab) Results In Java Exception Error: BIB-7000 Cannot Access X Server [ID 337899.1]
BIB-7000 Server Error On Navigating To Oracle Marketing Audience Workbench [ID 433209.1]
How to Test X-Server in JSP Module [ID 461497.1]
Clicking Configure icon in DBI gives You have encountered an unexpected error. Please contact the System Administrator for assistance [ID 303422.1]
Troubleshooting FNDREPRINT Framework in 11.5.10 [ID 330351.1]
ATTEMPING TO VIEW GRAPHICS OR TRYING TO CONFIGURE THE JAVA MAILER HANGS [ID 351839.1]
Thanks,
Hussein

Cannot access my WD world edition on Mavericks 10.9 finder

Hello my fellow mac-users
I seem to have a tiny prob. I've recently updated my Macbook pro 13' to the new Mavericks 10.9. And now I cannot access my WD My Book World Edition 1TB external storage.
I see it on the finder and I can access inside its configurations through Bonjour. But when I try to simply get in through Finder, putting the correct Username and Pass, it says:
"There was a problem connecting to the server "MyBookWorld". The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem."
Now I tried to find anything on the web, but all I found was a mere suggestion to buy a newer WD external drive - which is not an option for me.
I can easily connect it and see all of my files there when I'm on a Windows 7 operated computer.
Can someone help me out? PLEASE!!!
Thanks in advance!

I read this in the WD community written by a user called alazO and it has worked; hope this is useful
Find out what the IP address is for your NAS drive. I set mine to a static address, so that it's always the same. If you need help with this, let me know, and I'll give more info. But in short, if you can log into your router, look under your networks tab and peruse -- you should be able to find it.
Finder -> Go -> Connect to server. In the type-in box, put in afp:// IP address, if that does not fix it, put in smb://IP address. So, if your NAS IP address is 192.168.1.100 (example), the you type in afp://192.168.1.100 in the box. Then press Connect. That should restart your connection.
AFP is Apple File Protocol -- it is Apple's version of file management over the network. SMB is Server Message Block -- it is Microsoft's file managment over the network. They both work for me. SMB is more common among various Linux, Unix, Windows systems, and works with Apple. I've read in blogs that Apple may be moving to SMB over AFP, but I don't know that for a fact. I suggest trying both for your NAS, one may work faster than the other, and may depend on the firmware in your NAS.

Cannot Access Shortcut Menu for Adding Input/Output in Formula Node

This is a wierd problem. I cannot access the shortcut menu in formula node. I right click the border, nothing happens. Anyone run into this before? Is there any other way to add inputs and outputs?
I am running Vision Builder AI and want to use a formula node in my calculator tool.
Solved!
Go to Solution.

As the saying goes, "when you hear hoofbeats, think horses and not zebras". Let's get a few things out of the way.
Is the VI in edit mode?
Is autotool on?
Drop a fresh FN on a New VI and try it again.
The only other way I know to add/remove inputs is scripting, let's not go there.
I have had a few issues with context menus, very few which persisted past a LV and/or computer restart, so I won't rule out a zebra just yet.

HT4113 after IOS 7 update cannot access IPAD asking for Passcode

My Ipad is disable cannot access - need to reset passcode

Hi, Elvira299.
Thank you for using Apple Support Communities.
I understand your iPhone is disabled with an unknown passcode, the following article may help to resolve your issue:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Jason H.

Attempted to alter security settings and the result is that password no longer works. Tried CMD R but mouse inoperative and cannot access top menu for utilities

I tried to alter security settings resulting in rejection of my password. Tried booting using CMD R but non operating mouse pad means I cannot access top menu to select "utilities"

jmcg60,
which security settings did you try to alter? Do you have a USB mouse that you could use in place of your non-operating trackpad?

Cannot access payment information for my account

I Changed my credit card details on my account but purchase have been blocked, cannot access this information to verify it

What happens when you try to do a purchase, and what information can't you access and verify ?

Cannot access serial number for Student Edition of Acrobat X Pro

In the box containing the installation DVD, there is a coupon which gives the Coupon Code, and a web site to use this code to obtain my serial number.
The web site is www.adobe.com/go/eduverify but it will not open
How do I go about getting my serial number?
regards,
Jill

That is strange, it seems to work for me. We'll try something else!
I'm not sure what region you are located in, but here are two links which should work, please choose the one which applies to you. Let me know if this works?
These links apply to those who have purchased an education product from a reseller, which I presume you have.
Asia-Pacific:
http://www.adobe.com/ap/special/education/students/studentteacheredition/order_fulfillment .html
Europe, Middle East & Asia:
http://www.adobe.com/uk/special/education/students/studentteacheredition/order_fulfillment .html

Cannot access report attributes for editing

Similar Messages

Maybe you are looking for