Cannot access routers web-set up page.

I recently changed my ISP from Verizon to Cox. I can access the internet when my router is NOT connected. When I connect my router I gain Local access but no internet. I can't access my routers web-set up either. I tried to contact Cox but they do not offer help with routers. Can someone please help me with this problem?
My router is WRT54G V2
My modem is Arris TM602G
Running window vista ultimate

As you have changed your ISP you should first reset your router and then re-configure it...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router using the link here...

Similar Messages

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Cannot Access IP Web Browser Configuration Page OfficeJet 8600 Plus

Win 7 64-bit
HP OfficeJet Pro 8600 Plus
Wireless Connection
Hi:
The printout of wireless network test page shows IP address for HP Officejet Pro 8600 Plus as: http://192.168.1.104 (The HP Home Network Diagnostic Utility v4.3.0.002 also shows: 192.168.1.104)
When I try to access http://192.168.1.104 with either IE 9 or Firefox 10 I get an error message: "The website is unable to display the webpage"
But, on the same computer I CAN access http://192.168.1.103 HP Officejet 6480 web browser configuration page with either IE 9 or Firefox 10
Why I can't access the web configuration page: http://192.168.1.104
Thanks
FYI: I set the router to various other network modes, channel widths, channels and ssid broadcast on/off, and also removed power from router and printer, reconnected power and restarted computer, all these efforts did NOT allow access to http://192.168.1.104
This question was solved.
View Solution.

On the front of the printer: Setup > Network > Wireless Setup Wizard. Run it.
Next, on your PC, delete all instances of your printer in Control Panel > Devices and Printers.
Finally, re-add the printer this way:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. Hoy can I go back?

Since I updated my IPad software to iOS 5.0.1 from 5.0, I cannot access some web sites. How can I go back?

Sorry, you cannot downgrade iOS software.
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appear. Let go of the buttons and let the iPad restart. See if that fixes your problem.

Cannot access acrobat web capture facility too busy

Hi, i
have been using adobe acrobat 9 (part of creative web suite cs4) to convert webpages to pdf's. I now get a message to say that 'cannot access acrobat web capture facility too busy. I have reinstalled the software and ran the repair tool in acrobat after reading similar issues on the forum. It still hasnt fixed it. Any ideas??

I don't know what happened to acrobat V9 - I have the same problem - sorry I am at a loss?
Ron

Firefox 9.0, I cannot access Netflix web sight, but I can access it with IE, tried clearing cache & cookies stil cnnot access Netflix.

I use Firefox 9.0, I cannot access Netflix web sight, but I can access it using IE, I tried clearing the cache & cookies, but I still cannot access it. Help.

Try looking at [[Error loading web sites]] first.

HT4436 I cannot access my iCloud setting screen on my iPhone 4

I cannot access my iCloud setting from the settings menu. When I click on iCloud in settings the screen freezes

If the iCloud setting is grayed out and you can't tap it, go to Settings>General>Restrictions>Accounts (near the bottom) and set it to Allow Changes.

Cisco WS-SVC-NAM-2 Upgrade to 6.0.2; cannot access management web page

I upgraded our WS-SVC-NAM-2 which resides on a 6500, from version 5.1.2.1 to 6.0.2, to include patch2 . Everything seemed ok, however, regardless if I enable http or ip http secure server enable, we cannot access the management site with eithrer FireFox or IE. Status bar shows Internal 500 error, in FF shows "Problem Loading Page" The connection to the server was reset while the page was loading. I'm wondering if it has anything to do with Java, or crypto keys? Here are the patches loaded:
Mon May 4 11:51:20 2009 Patch: nam-app.4-0.strong-crypto-patchK9-1-0 Description: Strong Crypto Patch for NAM.
Fri May 6 08:56:59 2011 Patch: nam-app.strong-crypto-patchK9-5.1-0 Description: Strong Crypto Patch for NAM.
Fri Oct 7 06:53:20 2011 Patch: nam-app.strong-crypto-patchK9-5.1.2-1 Description: Strong Crypto Patch for NAM.
Wed Oct 15 14:56:28 2014 Patch: nam-app-patch.6.0-2-patch2 Description: Patch 2 for NAM release 6.0(2)
Successfully enabled web server.
[email protected]# show version
NAM application image version: 6.0(2-patch2)
Maintenance image version: 2.1(5)
NAM Daughter Card Micro code version: 1.34.1.28 (NAM)
BIOS Version: 4.0-Rel 6.0.9
PID: WS-SVC-NAM-2
Memory size: 1024 MB
Disk 0 size: 20 GB
Installed patches:
Any help would be appreciated. Thanks

Hi Ahmed,
****Upgarde procedure keep the Old data and take you you to the New version *******
This is an Upgarde Procedure ,however if you use the --install command during the Upgarde Procedure ,it will wipeout the old data and NAM will be like a factory Installed and then it will upgarded to New Version.
Follow the below link ,in the step 5:
Step 5 Upgrade the NAM application software as follows:
DON NOT USE THIS
root@localhost# upgrade ftp-url
where ftp-url is the FTP location and name of the NAM software image file
or
USE THIS ONE
root@localhost# upgrade ftp-url --install
Note The --install keyword clears and recreates all of the NAM partitions; this action is similar to restoring the factory-default state. If you use the --install keyword, the previously stored reports and data (if any) will be lost.
http://www.cisco.com/en/US/docs/net_mgmt/network_analysis_module_software/5.1/switch/configuration/guide/advcfg.html#wp1035516
IMP :: It is recommended to have 2GB RAM for running 5.x image
Thanks-
Afroz
[Do rate the useful post]

Can't access routers web page

hi, i can't access my routers web page. i reset the router several times and used admin for password, with no luck. any suggestions?

What is the Model number of the router ??...
Also tell me who is your Internet Service Provider ....
Message Edited by Carrot on 07-24-2008 05:49 PM

Cannot access OSB Web Tool after Oracle Grid Control 11g was implemented

Hi Guys,
Here's our environment:
We have servers: serv010, serv004, serv005, test001. All are working on windows server 2003. We have implemented Oracle Grid Control as a requirement for adding targets into our admin server.
server010:
- originally has OEM database control configured.
- this has a tape library configured.
- this is the media server of out OSB tape backup that we are setting up.
- we can access obtool and webtool in this server.
serv004 and serv005 are clustered RAC nodes.
test001 is our test environment.
Before installing grid control:
1. We can access OSB webtool on the media server (serv010)
2. We can use OEM database control to access Oracle Secure Backup as well.
3. OBTOOL is also working.
What we did:
1. We implemented Oracle Grid Conrtol 11 on pserv010 (which is also our OSB media server).
2. All the targets are now accessible using the grid.
What we noticed after Grid is now working:
1. We can no longer access OSB Web Tool from the admin server (serv010)
2. It says page cannot be displayed every time we launch the WebTool on our Starup programs.
Before we can do the following:
1. Access the web tool.
2. Access the webtool using OEM Database Control.
Here's the apache logs that we have:
Program Files-Oracle-Backup-Apache-logs
error_log:
These are the messages in the error_log and I placed some notes on each part:
When is was working fine:
[Wed Apr 27 03:44:44 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 03:44:44 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 03:44:44 2011] [notice] Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m PHP/4.4.9 configured -- resuming normal operations
[Wed Apr 27 03:44:44 2011] [notice] Server built: Aug 20 2010 11:56:27
[Wed Apr 27 03:44:44 2011] [notice] Parent: Created child process 2640
[Wed Apr 27 03:44:45 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 03:44:45 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 03:44:45 2011] [notice] Child 2640: Child process is running
[Wed Apr 27 03:44:45 2011] [notice] Child 2640: Acquired the start mutex.
[Wed Apr 27 03:44:45 2011] [notice] Child 2640: Starting 64 worker threads.
[Wed Apr 27 03:44:45 2011] [notice] Child 2640: Starting thread to listen on port 443.
[Wed Apr 27 04:27:09 2011] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Wed Apr 27 04:27:09 2011] [notice] Child 2640: Exit event signaled. Child process is ending.
[Wed Apr 27 04:27:10 2011] [notice] Child 2640: Released the start mutex
[Wed Apr 27 04:27:11 2011] [notice] Child 2640: All worker threads have exited.
[Wed Apr 27 04:27:11 2011] [notice] Child 2640: Child process is exiting
[Wed Apr 27 04:27:11 2011] [notice] Parent: Child process exited successfully.
[Wed Apr 27 04:27:16 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 04:27:16 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 04:27:16 2011] [notice] Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m PHP/4.4.9 configured -- resuming normal operations
[Wed Apr 27 04:27:16 2011] [notice] Server built: Aug 20 2010 11:56:27
[Wed Apr 27 04:27:16 2011] [notice] Parent: Created child process 3348
[Wed Apr 27 04:27:16 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 04:27:16 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Wed Apr 27 04:27:16 2011] [notice] Child 3348: Child process is running
[Wed Apr 27 04:27:16 2011] [notice] Child 3348: Acquired the start mutex.
[Wed Apr 27 04:27:16 2011] [notice] Child 3348: Starting 64 worker threads.
[Wed Apr 27 04:27:16 2011] [notice] Child 3348: Starting thread to listen on port 443.
[Mon May 02 05:31:44 2011] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Mon May 02 05:31:44 2011] [notice] Child 3348: Exit event signaled. Child process is ending.
[Mon May 02 05:31:45 2011] [notice] Child 3348: Released the start mutex
[Mon May 02 05:35:29 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 05:35:30 2011] [warn] pid file C:/Program Files/Oracle/Backup/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Mon May 02 05:35:30 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 05:35:30 2011] [notice] Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m PHP/4.4.9 configured -- resuming normal operations
[Mon May 02 05:35:30 2011] [notice] Server built: Aug 20 2010 11:56:27
[Mon May 02 05:35:30 2011] [notice] Parent: Created child process 2044
[Mon May 02 05:35:30 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 05:35:31 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 05:35:31 2011] [notice] Child 2044: Child process is running
[Mon May 02 05:35:31 2011] [notice] Child 2044: Acquired the start mutex.
[Mon May 02 05:35:31 2011] [notice] Child 2044: Starting 64 worker threads.
[Mon May 02 05:35:31 2011] [notice] Child 2044: Starting thread to listen on port 443.
[Mon May 02 23:17:07 2011] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Mon May 02 23:17:07 2011] [notice] Child 2044: Exit event signaled. Child process is ending.
[Mon May 02 23:17:08 2011] [notice] Child 2044: Released the start mutex
[Mon May 02 23:17:37 2011] [notice] Parent: Forcing termination of child process 1676
[Mon May 02 23:22:39 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 23:22:39 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 23:22:39 2011] [notice] Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m PHP/4.4.9 configured -- resuming normal operations
[Mon May 02 23:22:39 2011] [notice] Server built: Aug 20 2010 11:56:27
[Mon May 02 23:22:39 2011] [notice] Parent: Created child process 2044
[Mon May 02 23:22:39 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 23:22:40 2011] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Mon May 02 23:22:40 2011] [notice] Child 2044: Child process is running
[Mon May 02 23:22:40 2011] [notice] Child 2044: Acquired the start mutex.
[Mon May 02 23:22:40 2011] [notice] Child 2044: Starting 64 worker threads.
[Mon May 02 23:22:40 2011] [notice] Child 2044: Starting thread to listen on port 443.
When we were reconfiguring the OEM Grid Control 11g:
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:35:02 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php?tab=2&mode=6
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:41:33 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: reset() [function.reset]: Passed variable is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 301, referer: https:// serv010/index.php
[Thu May 05 02:47:06 2011] [error] [client 10.1.4.14] PHP Warning: Variable passed to each() is not an array or object in C:\\Program Files\\Oracle\\Backup\\apache\\htdocs\\include\\detailed_oracle.php on line 302, referer: https:// serv010/index.php
[Wed May 11 03:16:15 2011] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Wed May 11 03:16:15 2011] [notice] Child 2044: Exit event signaled. Child process is ending.
[Wed May 11 03:16:16 2011] [notice] Child 2044: Released the start mutex
[Wed May 11 03:16:17 2011] [notice] Child 2044: All worker threads have exited.
[Wed May 11 03:16:17 2011] [notice] Child 2044: Child process is exiting
[Wed May 11 03:16:17 2011] [notice] Parent: Child process exited successfully.
When we have the Grid Installed and we can no longer access the OSB WebTool:
[Wed May 11 03:19:56 2011] [error] Init: Pass phrase incorrect
[Wed May 11 03:19:56 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Wed May 11 03:19:56 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Wed May 11 03:19:56 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Wed May 11 03:19:56 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
[Wed May 11 23:34:01 2011] [error] Init: Pass phrase incorrect
[Wed May 11 23:34:01 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Wed May 11 23:34:01 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Wed May 11 23:34:01 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Wed May 11 23:34:01 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
[Thu May 12 01:11:22 2011] [error] Init: Pass phrase incorrect
[Thu May 12 01:11:22 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Thu May 12 01:11:22 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Thu May 12 01:11:22 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Thu May 12 01:11:22 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
[Thu May 12 04:38:05 2011] [error] Init: Pass phrase incorrect
[Thu May 12 04:38:05 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Thu May 12 04:38:05 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Thu May 12 04:38:05 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Thu May 12 04:38:05 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
[Thu May 12 05:06:17 2011] [error] Init: Pass phrase incorrect
[Thu May 12 05:06:17 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Thu May 12 05:06:17 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Thu May 12 05:06:17 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Thu May 12 05:06:17 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
[Wed May 18 01:41:16 2011] [error] Init: Pass phrase incorrect
[Wed May 18 01:41:16 2011] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[Wed May 18 01:41:16 2011] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[Wed May 18 01:41:16 2011] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[Wed May 18 01:41:16 2011] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
Hope you can help us with this issue. Thanks guys!
Edited by: iamgilbert on May 18, 2011 10:20 PM

I found the source of proble....but cannot find solution
[06/May/2009 09:40:37 00440] [warn] You are using mod_ssl under Win32. This combination is NOT officially supported. Use it at your own risk!
[06/May/2009 09:40:37 00440] [error] Init: Pass phrase incorrect (OpenSSL library error follows)
[06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
[06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
[06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
[06/May/2009 09:40:37 00440] [error] OpenSSL: error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib

I cannot access common web site like Paypal. I get an "Untrusted Connection" screen. I have accessed Paypal in the past. This also happens with Capital One.

Just in the past week, when I try to access many web sites, including PayPal and Capital One, I get a Untrusted Connection screen and it prevents me from entering these sites.

hello ra12rick, first please make sure that the date, time & timezone are set correctly on your system. if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page & inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
thank you!

WRT160n cannot access via web browser

After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.

Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router.

Cannot access internal web server from same lan

i cant resolve one problem in may 1921 ISR router, i have a web server in my internal lan , i set up static nat for accessing that web server from outside and it works fine but i cannot view that site from internal workstations can you suggest me what to do. i need packets to go out the outgoing interface of router and then come back and enter the static nat wich will direct to the web server is it possible?
static nat is
ip nat inside source static tcp <local web server adress> 80 <global address> 80
also i have set up dinamic nat for outgoing trafic
ip nat inside source list <access-list> interface <outgoing interface>
and it is working fine too.
on external interface i have nat outside
on internal interface i have nat inside

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

Cannot access SPE2000 web console

Hi,
I was able to access the web console before but all of the sudden last week when we tried to login to do some configuration it didn't recognize it. I tried default login and still failed. So, I did factory reset of the switch and couldn't find the IP. I use 'FastResolver' to find the MAC address of the device and it didn't find it. I did some research and they mention to use 192.168.100.20 that failed. I even tried scanning for 192.168.1.x, 192.168.2.x, and 192.168.3.x and 192.168.15.x. But didn't find the device. Then I did again without any router or uplink connected and even assigned static IP on the laptop. We have 2 other switches of exact same make and model with same exact issue. We also have encounter similar issue in the past so not sure if anyone have come across this issue. Plus I need help on accessing the switch so we can put back same configuration we had before.
Thank You,
Ankur

Hello,
I'm really sorry you are having issues with these devices.
Now, these switches are a little on the older side, and I'm not sure they will request for a DHCP address, so maybe that's why you cannot find it as they are not getting an address on the network.
What I will recommend is to unplug the switch from the network just to be sure, then factory reset it, connect a PC directly to it and assign a static IP address of 192.168.1.100 to it, then open a web browser and try to access the interface of the switch by going to 192.168.1.254.
I hope this helps.

Cannot access routers web-set up page.

Similar Messages

Maybe you are looking for