Cannot access Siebel application through browser
Hi,
We have installed Siebel demo quickstart SIA 8.1.1 in one laptop.The Siebel application works fine. The only problem is that we cannot access the Siebel application through a browser. We have to launch the Siebel application from Windows program menu.We need to set up the Siebel application so that we can access it through IE browser. There are some settings that need to be set up in the .cfg files to make the application available trough Internet Explorer.
We have already tried using the url http://servername:8081/callcenter_enu/start.swe? But it returns "page cannot be displayed". We are accessing the application from the host computer.
Regards
CP
Are you able to connect with dedicate client?
if yes, then you just to need to verify setting/configuration for web server. Which can be found in installation guide.
Also could you please share logs. Error you are getting is quite generic and have multiple symptoms.
Have you tried to search on Oracle Support. There is complete article available for this error.
Regards,
Rajesh Kumar
Similar Messages
-
Cannot access AOL email through browser after security wipe
ok - the blackberry is failing miserably
first - the bluetooth isn't reconnecting to the radio to receive text messages
the keyboard is having a hardware issue - the symbol keys appears to be taking over the n and m key
the phone was a year old in june -
to try to correct this - blackberry support suggested that I back up the phone and reload the software - great did this
then they suggested a secuirty wipe - yup - did this too
then I restored the phone with the back up
now when I try to log into AOL through the browser - it get to the home page, type in the passsword and get an error message. It logs in on other cell phones - so its definitely mine. The emails come through if I set it up on the blackberry itself
anhy odea how to fix it before I go to bellThat is quite interesting, I've never seen an error message start with "GAH!" before...quite interesting.
Nevertheless, please try this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error while accessing siebel application
Hi,
I installed Siebel 8.1 on Windows 2003. But when i try to access the application via http://localhost/service_enu I am getting the error:
The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.
The steps i am following are :
1. Installed Siebel Enterprise Server including Siebel Gateway, Siebel Server and Database Configuration Utilities.
2. Configured Siebel Gateway Name Server.
3. Create Siebel Enterprise.
4. Create SWSE logical profile.
5. Run Database Configuration utilities to install Siebel Database.
6. Run Siebel Server configuration.
7. Installed and configured SWSE.
All the above steps executed successfully. But when after these steps i try to access the Siebel application through http://localhost/service_enu, the above mentioned error is displayed.
I am pasting the contents of the ss101203_3216.log:
2021 2010-12-03 09:15:00 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 ss101203_3216 3216 2632 c:\sba81\SWEApp\log\ss101203_3216.log 8.1.1 [21111] ENU
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:00 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [SWSE] Open Session failed (0xa600d1) after 0.0363 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:00 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [SWSE] Open Session failed (0xa600d1) after 0.0047 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:01 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Open Session failed (0xa600d1) after 0.0064 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:01 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Open Session failed (0xa600d1) after 0.0040 seconds.
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Failed to obtain a session ID. Login failed attempting to connect to %1
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Set Error Response (Session: Error: 10879185 Message: Login failed attempting to connect to siebel.TCPIP.None.None://GUPAR01-W3-27:2321/SBA_81/SFSObjMgr_enu)
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Login failed.
SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
Please provide pointers to resolve this problem.
Thanks,
Anu
Edited by: 816755 on Dec 3, 2010 6:16 AMHi Robert,
After configuring the Siebel Gateway Name Server, the execution is successfull showing no errors. But when i see the log files, i can see some errors in those. I have created a user SADMIN as administrator and then trying to install Siebel. The config info is :
Main Task Selection : Create New Configuration
Configuration Task Selection : Configure a New Enterprise in a Gateway Name Server
Gateway Name Server Authentication User Account Name : SADMIN
Gateway Name Server Authentication User Account Password : ********
Gateway Name Server Host Name : GUPAR01-W3-27
Gateway Name Server TCP/IP Port : 2320
Siebel Enterprise Name : SBA_81
Enterprise Description : SBA_81 Enterprise
Primary Siebel File System : C:\sba81\gtwysrvr\fs
RDBMS Platform : Oracle Database Enterprise Edition
Database Table Owner : SIEBEL
Oracle SQLNet Connect String : SIEBEL
Siebel Database User Account Name : SADMIN
Siebel Database User Account Password : ********
Enterprise Security Authentication Profile : Database Authentication (default)
Security Adapter Name (named subsystem) : DBSecAdpt
Propagate Authentication Settings to the Gateway Name Server : true
The contents of sw_cfg_util(001).log is:
2021 2010-12-06 01:41:25 2010-12-06 01:41:25 -0500 00000016 001 003f 0001 09 sw_cfg_util 1768 3684 C:\sba81\gtwysrvr\log\sw_cfg_util(001).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000e84cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxEntrTasks for config object TxnProc
GenericLog GenericError 1 000000e84cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxEntrTasks for Comp:TxnProc in CompGroup:Remote
GenericLog GenericError 1 000000fc4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxEntrTasks for config object RepAgent
GenericLog GenericError 1 000000fc4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxEntrTasks for Comp:RepAgent in CompGroup:Remote
GenericLog GenericError 1 0000013d4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1091) err=3407908 sys=0) SBL-SUL-00036: Could not set the component attributes for component MsgBroadcastMgr
GenericLog GenericError 1 0000013d4cfc05a4:0 2010-12-06 01:41:25 Error creating Component:MsgBroadcastMgr in CompGroup:CommMgmt
GenericLog GenericError 1 0000028a4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object TaskLogCleanup
GenericLog GenericError 1 0000028a4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:TaskLogCleanup in CompGroup:TaskUI
GenericLog GenericError 1 0000028f4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxMtServers for config object RTSDispatcher
GenericLog GenericError 1 0000028f4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxMtServers for Comp:RTSDispatcher in CompGroup:RTSRemote
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MTInfraTrace for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MTInfraTrace for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxSubtasks for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxSubtasks for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxWorkerTasks for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxWorkerTasks for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sccitems.cpp (2047) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sccconfg.cpp (1419) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (srscobj.cpp (640) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (235) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:AdminRoleName for Comp:ServerMgr in CompGroup:System
The contents of sw_cfg_util(002).log is :
2021 2010-12-06 01:41:25 2010-12-06 01:41:25 -0500 00000005 001 003f 0001 09 sw_cfg_util 896 2220 C:\sba81\gtwysrvr\log\sw_cfg_util(002).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000003144cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object LoyEngineBatch
GenericLog GenericError 1 000003144cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:LoyEngineBatch in CompGroup:LoyaltyEngine
GenericLog GenericError 1 0000031e4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object LoyEngineInteractive
GenericLog GenericError 1 0000031e4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:LoyEngineInteractive in CompGroup:LoyaltyEngine
The contents of sw_cfg_util(003).log is :
2021 2010-12-06 01:41:27 2010-12-06 01:41:27 -0500 00000003 001 003f 0001 09 sw_cfg_util 2436 2664 C:\sba81\gtwysrvr\log\sw_cfg_util(003).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000003714cfc05a4:0 2010-12-06 01:41:27 (samisc.cpp (285) err=2883589 sys=0) SBL-SCC-00005: Internal:No more items found.
GenericLog GenericError 1 000003714cfc05a4:0 2010-12-06 01:41:27 (sasess.cpp (397) err=591895 sys=0) SBL-ADM-02071: Enterprise server SBA_81 not found in gateway server
Please provide pointers in resolving this issue.
Thanks,
Anu -
Hello gurus!!
I am trying to access the "Emergency address" from the LWE and I am getting this error "Cannot access Web Dynpro application: com.sap.tc.webdynpro.services.exceptions.WDException$DummyLocalizableTextFormatter@76829226". Could anybody please suggest what could be wrong with this action "Emergency Address"?
Thanks much for your help with this,
Maria Kutty Somori....Hi Yugandhar/Siddharth,
Emergency address is the standard callable object for Execution that is part of the Standard Life and Work events. I have customized to reorganize the actions depending on our requirements and i have created a different folder structure and different order of execution of callable objects.
How do I fix this "cannot access Webdynpro application" error? Please suggest.
Thank you so much,
Maria Kutty Somori..... -
Not able to access the application through URL in clustered environment.
Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhVHi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith -
Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you
You received incorrect information from AT&T. You can indeed access your voicemail without your iPhone.
Call AT&T at (800) 331-0500 (assuming you're in the U.S.). This is a 24 hour a day, 7 day a week number. Ask them how to access your voicemail. Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password. You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number. Let the AT&T person tell you. -
Accessing OC4J application through OHS
We developed a standalone web app on OC4J. Now we would like to deploy this application to a standalone OC4J running on the same machine as 9iAS. We would like to access our application through 9iAS OHS, possibly with as few changes to our application as possible.
So instead of http://oc4jhost:8888/appname/whatever.jsp
we want http://standardhost/appname should then redirect/rewrite to port 8888 and so on.
Is there a document that describes which configuration files need to be manipulated and how?
We assume mod_oc4j, httpd.conf, orion*.xml, and possibly others have to be edited.
We do not want to run our application INSIDE of 9iAS, because it uses its own frameset and because we want a more up-to-date Java for this application.Note that
The business client does not need a portal (it can but does not have to)
but NWBC can connect as well (by using the sapgui in the background-
hence sapgui needs then to be installed as well on the same client as
the NWBC) directly against the backend.
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaa
fb4b756e1eed/frameset.htm
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaafb4b756e1eed/frameset.htm
As of SAP enhancement package 5 for SAP ERP 6.0 you can choose from the
following deployment options for ESS:
Deployment Option 1: WD ABAP-Based ESS on NWBC
Deployment Option 2: WD ABAP-Based ESS on SAP NetWeaver Portal
Deployment Option 3: WD Java-Based ESS on SAP NetWeaver Portal
Activate the switch HCM_ESS_WDA_1 to use WD ABAP services
ESS Refer Note 1450179
EhP 5 ESS: The architect's view -
Accessing OC4J application through OHS, how?
We developed a standalone web app on OC4J. Now we would like to deploy this application to a standalone OC4J running on the same machine as 9iAS. We would like to access our application through 9iAS OHS, possibly with as few changes to our application as possible.
So instead of http://oc4jhost:8888/appname/whatever.jsp
we want http://standardhost/appname should then redirect/rewrite to port 8888 and so on.
Is there a document that describes which configuration files need to be manipulated and how?
We assume mod_oc4j, httpd.conf, orion*.xml, and possibly others have to be edited.
We do not want to run our application INSIDE of 9iAS, because it uses its own frameset and because we want a more up-to-date Java for this application.Note that
The business client does not need a portal (it can but does not have to)
but NWBC can connect as well (by using the sapgui in the background-
hence sapgui needs then to be installed as well on the same client as
the NWBC) directly against the backend.
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaa
fb4b756e1eed/frameset.htm
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaafb4b756e1eed/frameset.htm
As of SAP enhancement package 5 for SAP ERP 6.0 you can choose from the
following deployment options for ESS:
Deployment Option 1: WD ABAP-Based ESS on NWBC
Deployment Option 2: WD ABAP-Based ESS on SAP NetWeaver Portal
Deployment Option 3: WD Java-Based ESS on SAP NetWeaver Portal
Activate the switch HCM_ESS_WDA_1 to use WD ABAP services
ESS Refer Note 1450179
EhP 5 ESS: The architect's view -
I changed my aol password on my desktop and now cannot access my emails through my iphone.
I changed my aol password on my desktop and now cannot access my emails through my iphone. I tried changing the password on my phone but it still says user name or password for aol is incorrect. I have also deleted the account and added back and it still saids the same thing. I would really appreciate any help on this.
You are referring to your iTunes/app store account? You will need to sign out of your old account on your iPhone and sign in with the new one.
-
Cannot access itune store through ipad air. The message says "cannot open itune store".
Cannot connect to iTune Store
(a) Sign out and sign in again (Settings>iTunes and App Store>Apple ID)
(b) Check Time Zone and set to automatic (Setting>General>Date and Time) -
User is locked in R/3 but still access the application through portal
We are currently on NW2004s SP10 .
We locked the User A in R/3 SRM backend system and from Enterprise Portal the same User A login and try to access the SRM application in backend . The system is allowing to access which we want to prevent .
The authentication ticket type is "SAP Logon Ticket" . The User A is trying to access ITS services through Portal.
Do we have specific SSO parameter which needs to set in backend SRM application .
Thanks
Chandrashekhar KHi
We have maintained the following profile parameter for SSO in our SRM system . From portal we are accessing the SRM system
login/accept_sso2_ticket 1
login/certificate_request_ca_url https://tcs.mySAP.com/invoke/tc/usercert
login/certificate_request_subject CN=&UNAME, OU=&WPOU, O=mySAP.com User, C=DE
login/create_sso2_ticket 0
login/disable_cpic 0
login/disable_multi_gui_login 0
login/disable_multi_rfc_login 0
login/disable_password_logon 0
login/failed_user_auto_unlock 0
login/fails_to_session_end 3
login/fails_to_user_lock 3
login/isolate_rfc_system_calls 0
login/min_password_diff 1
login/min_password_digits 0
login/min_password_letters 0
login/min_password_lng 6
login/min_password_specials 0
login/multi_login_users HP
login/no_automatic_user_sapstar 1
login/password_change_for_SSO 0
login/password_charset 1
login/password_expiration_time 60
login/password_logon_usergroup
login/password_max_new_valid 0
login/password_max_reset_valid 0
login/system_client 400
login/ticket_expiration_time 60
login/ticket_only_by_https 0
login/ticket_only_to_host 0
login/ticketcache_entries_max 1000
login/ticketcache_off 0
login/update_logon_timestamp m
Please suggest as to change any parameter value . We want to restrict the user to access SRM system from portal if he is locked int e SRM system.
Thanks -
Deployed J2EE application successfully. But cannot access the application
I installed SAP Netweaver 2004s and tried to create a Web application and an ear file looking at the example given at
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5c93acbd1343d4be7d79dc298faa7b/frameset.htm
I followed all the steps listed there. The deployment from the Developer Studio showed success. When I try to access the application using the url
http://localhost:50000/Calculator/Calculator.jsp I get the following error. I am not sure why it is looking at com.sap.engine.docs.examples for the file.
The requested resource /Calculator/Calculator.jsp is not available
Details: File [Calculator/Calculator.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Please let me know what I am possibly doing wrong here. Any help is very much appreciated.Hi Viji,
If you are opening the web browser from your desktop , instead of <localhost>, you should use the name of the machine on which your J2EE engine is installed.
Call the calculator application by entering its URL in the Web browser:
http://<host>:50000/<contextRoot>/<Name_of_JSP.jsp>
Where <host> is where j2ee is installed.
Regards,
Siddhesh -
Cannot access itunes radio through autoconfig proxy
I've moved to a new office, and the new office uses autoconfig proxy. The autoconfig proxy needs authentication. Since moving to this new office, I cannot access the itunes radio. I've tried going to one of the radio website radioio and tried listening directly from there. But also no success. I clicked on the links on the website and windows media player popped up, but it seems that it also cannot get through the proxy. In addition to proxy, it seems there is also a filter installed at the new office.
Anyone knows how I can listen to the itunes radio again at this new office?You'll have to talk with the IT people and see if they have blocked the ports.
-
I cannot access my apps (candy crush or fb) through wifi or data useage. It will start to load then returns back to the home screen.
Answered in your other thread - you only need to post once.
-
Accessing portal application through NWBC (EhP5)
Can anyone shed some light on how are the portal application accessed if we want to use portal application through NWBC?
What portal applications are available... we are on EhP5...
Regards,
HarshalNote that
The business client does not need a portal (it can but does not have to)
but NWBC can connect as well (by using the sapgui in the background-
hence sapgui needs then to be installed as well on the same client as
the NWBC) directly against the backend.
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaa
fb4b756e1eed/frameset.htm
http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/31/8dd113b8ba4832aeaafb4b756e1eed/frameset.htm
As of SAP enhancement package 5 for SAP ERP 6.0 you can choose from the
following deployment options for ESS:
Deployment Option 1: WD ABAP-Based ESS on NWBC
Deployment Option 2: WD ABAP-Based ESS on SAP NetWeaver Portal
Deployment Option 3: WD Java-Based ESS on SAP NetWeaver Portal
Activate the switch HCM_ESS_WDA_1 to use WD ABAP services
ESS Refer Note 1450179
EhP 5 ESS: The architect's view
Maybe you are looking for
-
Hierarchy: How to suppress duplicated/repeated rows in a BEx query
Hi Gurus. I have a BEx query which displays data based on a Cost Element hierarchy. When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout al
-
hi in order to use this : is this a stand alone or i should have somthing on my server in order to use it? (i.e special extention) sorry if the question is dumb tx
-
Not all drivers were updated when upgrading to Bootcamp 2.0
The drivers that I checked are over a year old. I've ran repair a few times but no change. The following features aren't working: Keyboard features like num lock Track pad/button - no right click, no scroll iSight camera - "not programed" Some PCI de
-
Oracle IAM integration with GRC 10
Hi All, Our client is using Oracle IAM for user provisioning process. Now they have SAP GRC being implemented for two of their SAP systems. Now client wants to integrate SAP GRC Access Risks analysis (ARA) for SOD analysis and User Access Management(
-
How is x! calculated in Calculator?
I can use the x! key to find (pi)! ≈ 7.188082728976031. How does the x! key calculate a result when x IS NOT a non-negative integer? This applies to my MacBook Pro with MacOS 10.9.2, and my iPhone 4 with iOS 7.1. Thanks, -Steve Stephenson