Cannot access site for bonus software download included in printer purchase

cannot access novadevelopment.com

Works fine for me. Try a different browser.
http://www.novadevelopment.com/
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Cannot access sites saved to Reading List in Safari with OS 10.8.5

I just upgraded to 10.8.5, Mountain Lion, and encountered a number of problems with overall performance. One of these problems is that I cannot access sites that I have added to Safari's reading list. When I click on the link in the list I just get another "Top Sites" window opening up.
I'll add a second issue experienced after upgrading to OS 10.8.5. There have been random times when after awakening my MacBook Pro after extended sleep I have received a message that "drive(s) was/were improperly ejected". Since then I have had two external drives from different manufacturers quit on me - on start-up I get the message that "The disk you inserted is not readable by this computer…" even though they were readable recently. One of the manufacturers indicated that they have heard this is a Mac OS problem which is randomly not allowing the computer to wait for a drive to "dismount" properly before going into sleep mode. Anyone else with these problems? Solutions?

Hi Russ_R,
Welcome to the HP Forums.
I see by your post that you would like to configure the printer on the wireless network.
I will do my best to assist you with this issue.
Download and install the 10.7 software for the printer so we will have the HTML software to run the wireless setup for the printer.
HP LaserJet Full Feature Software and Driver.
Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Close out all applications.
On the Apple menu bar, click Go, computer, Mac Harddrive, library, printers, HP,Laserjet, P1100_P1560_P1600Series, open html config.
Go to the network tab, select wireless on the left side, select infrastructure, select network name, select the double
arrow button to move the network name over to the left side, fill in passwords, apply.
You should get a solid blue wireless light in about 1 minute.
(Note: if the html config doesn't load you will have to update the printers firmware with USB connection)
Then go to the Apple, system preferences, print & scan, highlight the P1102w and click the minus at bottom left
corner to delete it, then disconnect USB cable, click the plus sign in bottom left corner and highlight the P1102w bonjour printer, beside Use: make sure it shows the proper printer name and not Airprint, (Airprint is a preinstalled apple driver with basic functionality) click on the add button. You might have to click on the drop down to select your printer.
Try and print.
Please let me know if you need further assistance.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT1218 After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

After a recent iTunes update attempt iTunes no longer functions and the airport extreme base station is not accessable on our computer. We still have wifi but cannot access the base station software.

Thanks for the reply. I appreciate the response. I tried that approach this evening and it didn't work for me. (Technically it worked for me, when I was hardwired into my base station, but would not work for me wirelessly, which is my main issue.)
Again, using the approach you recommended works only if I have my ethernet cable attached to the LAN port so my computer is communicating directly to the base station through the hard wire. I am able to scan for my base station and make setting adjustments normally this way too.
As soon as I disconnect from the LAN port and try to go wireless is where I run into problems. The Base Station's wireless network I created is available to choose in the top right corner of the monitor with all of the other available wireless devices/networks -- but the network I created does not have access to the internet. I am also unable to configure my Base Station wirelessly. When my Airport Utility tries to scan for the Base Station and Network, it cannot find any Apple Wireless Device. It's like the Wireless Network in my base station is not sending out a signal.
Is there a way to resolve this issue?

HT1725 I purchased a book and although it is shown in my library the word "paused" is written across it and I cannot access. i presume the download did not complete, but can't seem to fix it.

I purchased a book in advance. It is now in my library, but the word "paused" appears across the book and I cannot access. I assume the download did not complete, but I cannot seem to fix it. Does anyone know what the problem could be?

Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
Then reset: hold down the home button along with the power button until you see the Apple, then let go.

Cannot access "check for available downloads"

So, I can download and play any of the free singles.. and I can purchase singles and download them... but I have 58 items including 36 songs from 2 compilations that I have purchased but that will not download as a group.
Every time I click on "Check for Available Downloads" like iTunes keeps telling me, it says "Unable to check for available downloads. The iTunes store is temporarily unavailable. Please try again later."...
Now, is there something wrong with the Check for Available Downloads option? Why would I be able to get individual songs but not able to get groups of songs or any songs that I had paid for previously and was unable to download at that time?
I have done the firewall disable, i have modified my hosts file, I have upgrades itunes, I have run the diagnostics and everythign works (as evidenced by my ability to get singles with out an issue)...
Anyone else having problems with whole albums and compilations and songs that are currently paid for but not downloaded?
Thanx.
Josh

I am currently having the same issue with some movies - very annoying. I also tried having Apple reset my cue - didn't work Please let me know if you get anything to work

Cannot access address book after software update

I am unable to access the default address book after doing the software update - I restored my backup and everything is there except for my contacts. When I open my address book it is labeled personal and there are no addresses and when I add a contact it does not show up, but I noticed when I go into options it shows only default under address books with 99 entries and when I try to add a contact it does not show in the list on my phone but the number of entries in the default book goes up so they are going into that one but I cannot access it? Any idea how I can get my contact list back? (hope this makes sense to someone )
Thank you
Solved!
Go to Solution.

Sdgardne, thank you so much! Using your post and links I was able to restore my address book after upgrading my software and having trouble with my address book. And I am very technologically challenged so I appreciate having something I could understand and follow.

2013 SP Site Collection and Farm Admin permissions and cannot access site

I am Farm Admin and Site Collection admin on my 2013 SP server and CAN access Central Admin, but CANNOT open the site without being promted for user name and password. When I enter the user name and password they are not accepted.
This is on my production server. I have NO PROBLEMs with the staging server. The 2 are set up exactly the same.
Any suggestions?

Discussion
Farm Administrators are not automatically able to access site collections. They can however add themselves to the site collection administrators group. Additional detail:
Permissions for site collection administrators - scroll down to the
SharePoint farm administrators section (midway down) and look for the
Note.
Resolution
Add your farm administrators account to the site collection administrators group. You can do this two ways:
Go: Central administration > Application Management > Site Collections > Change site collection administrators
Go: [your site collection] > Site Settings > Users and Permissions > Site collection administrators.

How can I get my @mac email to work? when I try to reset password, i cannot access email for this and the security tells me I have wrong date of birth

Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac

COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING

Cannot access site ending with #

Some links within sites end with #. i cannot access these sites with firefox. IE works fine. i have 3.6.3 with Java 6.0.200.2
== This happened ==
Every time Firefox opened

You must have been disabled scripts in this site.
I'm using No-Script.
At first I blocked all scripts @firstdirect.com
and when clicked on: internet banking
it sent me to #
Then I enabled all the scripts @firstdirect.com
and when clicked on: internet banking
it sent me to login site.
So please make sure that you haven't blocked the site from using scripts (which is probably the problem here).
Post if still need help.

Cannot access Facebook for past two days - can access all other websites - what can I do to fix this?

Since yesterday afternoon, I keep getting a message that Facebook is taking too long to load and I cannot access it. I cannot tell if it is a Facebook problem or a problem with Firefox. I have looked at everything I can look at, but can see no problem. I am able to access everything else. HELP!
== URL of affected sites ==
http://facebook.com

log4j is not Commons Logging. They're different packages. You can use log4j within Commons Logging, but they're not the same thing and their classes are not interchangeable.
It looks like this thing is using Commons Logging.

Need Bluetooth for a Software Download Tryout?

I was trying to download Adobe Photo Elements 30-day tryout and after clicking--
"Adobe Photoshop Elements.pkg.sit" the error message is: "No Bluetooth Hardware Found"
This is the 2nd time I have tried to download software & the only default application is "Bluetooth"
1. how do I disable this (even though I do NOT have Bluetooth) or change application preferences?..

Hey iBod--
I do have StuffIt expander 10.0 installed. (btw--Thanx for the StuffIT acronym--I kid u not, it was an ah-hah! moment for newbie me)
Anyways, an error message came up #17537: couldn't open Adobe Photoshop Elements.pkg. And any other attempts to open this sit file w/o dragging it into StuffIt brings up the Bluetooth Does Not Exist message.
(My disk utility says my HD is o.k. & I do have enough memory.)
Grr. After all this drama, I'm just ready to A) go & buy the Photoshop DVD software w/o trial B) get a USB Bluetooth D-Link (though I still don't know why Adobe insists I need this to open this file) or C) buy the StuffIt DELUXE 10.0. Either way, I'm out $40-$80 (not LOL)
Oh wells, thanx for your reply & trying to help I appreciate it.

HT4768 Is it normal for this software download to take 5 or more hours?

I have been downloading the new Lion software for about 5 hours, is this normal?

Depends on your internet connection. The download is 4+ GB.

Cannot access ASA5510 for first time config ASDM or PING

     Hi
I have a fresh out the box asa5510 with 8.4 on it.
I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry.
I am really stumped, does anyone have any idea?
Please also see attached diagram for topology.
Thanks in advance
ciscoasa(config)# show run
: Saved
ASA Version 8.4(4)1
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
ftp mode passive
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended deny ip any any
pager lines 24
logging enable
logging console debugging
logging buffered warnings
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any management
no asdm history enable
arp timeout 14400
route management 0.0.0.0 0.0.0.0 10.90.255.126 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:79dc4cfc6161dcbd01a016ad9a2a2ca5
: end
%ASA-7-111009: User 'enable_15' executed cmd: show running-config
ciscoasa(config)#

Hi,
In this configuration:
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0         // ACE1
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0    // ACE2
access-list MANAGEMENT extended deny ip any any                                                       // ACE3
In ACE1 the network 10.0.0.0/8 in the destination is not in the same network with 10.90.255.0/25 (MGMT interface)
Can you try these ACEs:
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended deny ip any any
I agree with Jouni, in first time use a PC directly to the MGMT interface.
and use the clear arp command to clear the ARP cache
Best regards

I cannot access options for photos in iCloud control panel

I am trying to access photo stream on my Win7 PC, but cannot. When I go to the iCloud Windows control panel, photos are checked, but when I hit the options button, nothing happens.
It looks like iCloud photo stream is working on my iPhone and iPad.
e-John

Hi,
Open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Startup Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cannot access Overdrive app since ios7 download.

Overdrive access unavailable since ios7download.

Overdrive knows and are working on an update. FOr more up to date info you may want to check on their site.

Cannot access site for bonus software download included in printer purchase

Similar Messages

Maybe you are looking for