Cannot access user profile after recovery to previous restore point

On Satellite laptop internet access via wireless very slow 10 mins at startup sometimes. Suspected application recently installed making early access before system ready so decided to restore.
After recovery in safe mode [windows 7] error messages starting with ie4uinit.exe cannot start also several other progs will not start...temp user is now only access to machine...no ie or applications...network wireless ok...can see files and folders on hdd. No application programs listed.
Although admin user cannot seem to regain old user profile or set up new user...no passwords used
How do I get back to my old user profile please?
Mark

As I can see you have posted this under Toshiba Product Recovery category although your action has nothing to do with Toshiba recovery installation and, for me, it is Microsoft related issue.
To be honest I didn't understand what happen exactly but somehow I feel everything is messed up.
My advice: if possible back-up all your important data and make clean recovery image installation.
After doing this you will have factory settings and clean preinstalled OS so you will be able to use your notebook without any problems.
Your other thread:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=69938

Similar Messages

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Cannot access my Ipad after downloading latest download. It wont accept my password.

I cannot access my Ipad after downloading latest download. The Ipad wont accept my password. What can I do?

Try the following:
1. Restore:
http://support.apple.com/kb/HT1414
2. Recovery:
http://support.apple.com/kb/HT1808

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

What is the best way to automatically delete user profiles after x days of inactivity (school lab environment)?

I work at a school where we have multiple Mac Carts that have 30 MacBooks per cart. We image the macs every summer to delete the older user profiles but we are looking for way to possible have this done automatically through out the year to help with HDD space. What is the best way to delete user profiles after...say 180 days.... of inactivity automatically? I am open to login hooks, bash scripts, etc. Anything to get the job done. Thanks for any help or advice.

A search here turned up this post Deleting inactive users
It appears that the script posted will do as advertised though I would test it out on your systems and under your conditions to see if it does do what you need.
regards
Message was edited by: Frank Caggiano - That script looks for users over 21 days. To look for ones over 180 days change the 21 to 180 in the find command.

What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

The question says it all:
What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
In the User Profile -> Permissions there is only the option for "Full Control".

Hi Nikolay,
Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Reset to previous RESTORE POINT only possible with FLASHBACK ?

Ok, I can create a Restore Point (in v10g) by a command like:
CREATE RESTORE POINT foobar;
Actually I expected a symmetric command which reverts the whole database back
with a command like
RESET to RESTORE POINT foobar;
However I did not found such a (or similar) command.
Instead the only way I found was by a FLASHBACK command:
FLASHBACK DATABASE TO RESTORE POINT foobar;
Is this correct? Is there no other command for reverting back to a previous RESTORE POINT?
Peter

HI
Well there is no such command "RESET to RESTORE POINT foobar".....its... "Flashback database to restore point"
now question is that why we use flashback database to restore point? for example we want to run some application on our database but we are not sure that it might create some unwanted changes in our database ...so we mount our database and enable flashback then we create restore point let say "create restore point beforeupgrade"....and then we run our application now if we find some unwanted changes in our database we will flashback database to created restore point.
here is the link to understand more......
http://arjudba.blogspot.com/2008/04/performing-flashback-database.html..

Cannot access my profile

I have constant problems logging in, often receiving username password validation errors even when I cut and paste the values from the email I received when I registered and deleting every cookie which could possibly be set by you. When I can log in and try to access my profile, my browser sits with an empty page waiting for requests from your server to be fulfilled.
Please do not tell me to create an account using a different email, because I have only one I would use for this purpose, and I am not going to change that because of your inflexibility.
I really find this membership service quite poor and it used to be quite good before it was homogenised. Pity I am prevented from using Oracle products to their best advantage because I cannot access the info I need, I suppose I will have to recommend another native XML database to my client instead of seeing if Oracle XDS is capable!!!!

@Notcloudy the news you have posted if for google devices ie which operates under android operating system. Android used to remove the path of the data instead of data itself . So with advanced recovery system data can be relocated and used for unfair means!!
In their defend google answered that the android devices using android 4.1 or later are safe with this, thay have worked on this bug.
let get back to our case, i believe that you know that apple uses completely different and most advanced operating system ie ios .
Apple uses data encryption and data protection and much more to protect your data.
so you should be least bother about these stupid bugs if are a apple user ✌️

How Make TS local User Profile After Install Windows 7 without Domain

Hi,
I make TS to install Windows 7 Is success But after finish install i cannot login
If something need to add TS user local profile after install Windows 7 Without Join the Domain And make the user Administrator LocalGroup
Thank for Help

Let's start with the fact that you are missing a key element in your task sequence. You need to have the step
Setup Windows and ConfigMgr to perform the transition from Windows PE to the new operating system. This task sequence step is a required part of any operating system deployment. It installs the Configuration Manager client into the new operating
system and prepares for the task sequence to continue execution in the new operating system. See also for more information:
http://technet.microsoft.com/en-us/library/hh846237.aspx#BKMK_SetupWindowsandConfigMgr
About your screenshots:
With the first screenshot you not enabling the local administrator. Is that what you want?
With the second screenshot your only creating a user account and not adding it to the local administrators group. That would need an additional action like this
cmd.exe /c net localgroup /add administrators User01.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

TS1702 Help cannot access my AppStore after updating my ipad2 to iOS 6

I updated my software into iOS 6. After the update I noticed that the you tube apps is gone and I started to open my AppStore but I can't access it... What will I do??? I tried to reset everything but still I cannot access the AppStore . Pls help me. Tnx

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Cannot access address book after software update

I am unable to access the default address book after doing the software update - I restored my backup and everything is there except for my contacts. When I open my address book it is labeled personal and there are no addresses and when I add a contact it does not show up, but I noticed when I go into options it shows only default under address books with 99 entries and when I try to add a contact it does not show in the list on my phone but the number of entries in the default book goes up so they are going into that one but I cannot access it? Any idea how I can get my contact list back? (hope this makes sense to someone )
Thank you
Solved!
Go to Solution.

Sdgardne, thank you so much! Using your post and links I was able to restore my address book after upgrading my software and having trouble with my address book. And I am very technologically challenged so I appreciate having something I could understand and follow.

Lost all bookmarks in my user profile after latest microsoft windows update on 5/15/15

Last night at 2am when I went to hibernate my computer as I usually do, I saw that there were some automatic windows updates to be installed. Since I have Windows XP and Microsoft has supposedly ceased support, I cancelled the hibernation and got on the internet to make sure that Microsoft was pushing out these updates and what they were for. Everything seemed kosher so I closed the internet and all of my programs, and proceeded to shut down the computer allowing the updates to install.
Much to my chagrin this morning, I discovered that my user profile had essentially been wiped out. The user profile name was still there and the password still worked, but when I got in the whole profile had been restored to its initial settings. Most of my files that I had on the desktop are gone and when I launched FireFox, it had been reverted to its originally downloaded version (years ago) and all of my many, many bookmarks were gone. I did find some files in My Documents, but the bulk of the documents were not under my documents and appear to be gone.
I did find some files in a TEMP folder and saved all of those. Fortunately I did back up my computer about a month ago, but stupidly did not back up my bookmarks. I do have a back up from a couple of years ago that I can retrieve, but everything since then appears to be gone. There are many files in the TEMP file that I cannot identify and am hoping and praying that my bookmarks are still in the midst of them. I did a search for Mozilla FireFox profiles through my dos prompt, but it only found a default profile that is likely associated with my admin user account that I generally do not work on for security purposes.
I have searched all day on the internet for solutions with no luck. I would be most appreciative if anyone can provide some guidance that may be of help.
Signed,
Totally Mystified and ticked off at Microsoft

Make sure to copy the profiles.ini as well if you copied the xxxxxxxx.default folder from that old Windows account.
*http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

"Site System Status Summarizer still cannot access storage object" after DB Move

After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
https://support.microsoft.com/en-us/kb/2709082
Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
Solution: Investigate and correct any problems on your network.
Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
Possible cause: You accidentally deleted the storage object or took the storage object out of service.
Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
occurs properly.
The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
to OK, providing that the storage object has sufficient free space.
I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

Was a site reset performed at all yet? This has to be done.
Torsten Meringer | http://www.mssccmfaq.de
Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

Cannot access web console after install.

Hi all.
The last day has been my first encounter with Oracle VM and it seemed to go fine until I finished. I have installed the latest VM and management tools on a bare bones machine (spec below) but cannot access the console via http://machine:8888/OVA.
I have tried installing using https and without and can gain access to neither the https 4443 or the http 8888 yet I can ssh into it quite easily. The dmesg only really complains that there are no ipv6 routers (understandable) but the xend.log in /var/log/xen does show something strange at the bottom:
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:452) Adding Domain: 0
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:386) number of vcpus to use is 0
[2011-07-13 16:04:45 3011] INFO (SrvServer:177) unix path=/var/lib/xend/xend-socket
[2011-07-13 16:04:45 3011] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_type not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: session.get_all_records not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_record not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_all not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.get_network not found <------ ?????
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MAC not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MTU not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: debug.get_all not found
The spec of the machine started out as:
Athlon 64 x2 3600+
4Gb Ram
2 Nics (1 built in Broadcom & 1 Intel MT)
1 NVidia super duper gt9500
3 Hard Disk, (1 IDE 150gb , 1 SATA 80 & 1 SATA 150 - the IDE is master boot with system on it)
After a few attempts, I removed Video and the Intel card.
The install was done via CD and never complained and in this last install, it only had 1 NIC to choose for the management console.
On this last install I also chose top use none https and therefore the system says I should gain access via http://machine:8888/OVA
I do notice though that in some tutorials, it states alternatives to OVA like OVS etc, all of which I have tried.
Oh and if I netstat -an, it shows it's listening on port 8888.
many thanks, I'm guessing it's some a bit silly that I've over looked but from the way I read the install instructions, you only need the VM and the management Disks to install and you should be able to access via web console?
BTW, systems I'm using as clients to access range from, opera, firefox (Soalris), ie 6,7,8 & 9 from Windows and Windows server. All I get is Internet Explorer Cannot Display This Page.
many Thanks, Mark

Did you install the VM Manager software as a VM hosted by OVS? Make sure the VM is running. It is probably named something like OVM_EL5U4_X86_OVM_MANAGER_PVM. Use "xm list" on the OVS server to see which VMs are running.
If it's not running, then run "xm create /path/to/vm.cfg" the path is probably something like /OVS/running_pool/OVM_EL5U4_X86_OVM_MANAGER_PVM/vm.cfg
Jim

Cannot access usb ethernet after upgrade

I upgraded from 10.5.5 to 10.5.8 via download and now cannot access USB Ethernet. Select "Network" in System Preferences & all I get is "beach ball." When I disconnect USB Ethernet, Network appears. I had to use Apple USB Ethernet adaptor because Ethernet board got fried and did not want to buy new Mac. Can I go back to 10.5.0 then to 10.5.5 combo? If so, how?

Solved my own problem. Reinstalled 10.5 then the 10.5.5 Combo updater and now USB Ethernet works. I guess I will stay away from any further updates after this. So, my ancient eMac lives for another day.

Cannot access user profile after recovery to previous restore point

Similar Messages

Maybe you are looking for