Cannot access web-streaming site

Windows 7 Home Premium 64-bit/SP1 OS...cannot access ANY cahnnels on "FreedoCast" web-streaming site (http://www.freedocast.com)...despite having latest Flash installed (version 11,6,602,180 installed). Probably not a browser issue as this occurs on IE9, Firefox 19 & Safari 5--of which is a screenshot attached--as you can see No Video--just a Black Screen & No Audio--Basically the same display on all 3 browsers---COULD this be a "Flash" issue or more likely the actual site (http://www.freedocast.com)--or perhaps something ELSE, I might not be familiar with??

Hi,
You can check the port you bind for the website in IIS and make sure you have created endpoint with the correct port. You can also install Telnet client on your local computer and run "telnet xxx.cloudapp.net public_port_in_endpoint" at the command
prompt to see it works.
Have you enable SSL on the website hosted on Azure VM? If yes, please also create an endpoint with port 443 and open that port in Windows Firewall on the VM.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Firefox crashed today and i sent report since then i cannot access my favourite sites

Had a few crashes but for first time I sent report since then I cannot access my usual sites,can this be the cause?
== URL of affected sites ==
http://galabingo.com

Hello
Can you give me the crash report ID?
It can be found in Windows XP on
Start > Run > type in '''%APPDATA%'''
And navigate to '''Mozilla\Firefox\Crash Reports\Submitted'''
Copy the .txt files from the '''Submitted''' folder here.
Thanks
Moses
Firefox Support

NAC GUEST SERVER CANNOT ACCESS WEB CONSOLE

Hello,
I have a NAC guest server. I can access CLI but cannot access web console. I used both the https:// ip address/admin and http://ip address/admin. Please what could be the solution of this issue?
thank you and best regards.
Edwin

Edwin,
Are the various necessary services running on that server? Post the output of following commands:
ps auwwwx
chkconfig --list
service httpd status
service postgresql status
Faisal

SPA122 cannot access web configuration utility

The new SPA122 device connected to router through DHCP.
I can see IP-address on router's web page, can ping it, and receive it with ****110# IVR command.
But I cannot access web configuration utility in the browser: the page is unavailible. I tried to allow WAN access with ****7932#1#1 IVR action - the problrem still on.
Can You give me any advice what to do.

You can also connect to the lan/ethernet side of the device, do an ipconfig /renew
You should get an address on the 192.168.15 network, the default for the router in the ATA is 192.168.15.1
Then you can set up the non default password, enable the wan web server (administration tab I think).
dlm...

Suddenly on my iPad I cannot access web links via emails but can on my iphone

Suddenly I Cannot access web links via emails on my iPad but can on my iPhone. Is there something in my settings I need to change?

Restart
https://www.apple.com/support/iphone/assistant/phone/#section_1

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

Using mountain lion operating system, downoaded iphoto 9.4 update, aperature 3.4.3 update and still cannot access photo stream. now what??

With Aperture, you should be able to use Photo Stream now, but you need iPhoto 9.4.2 > http://support.apple.com/kb/DL1608
After updating iPhoto to the latest version, open System Preferences > iCloud and tick Photo Stream. Finally, you will have to turn on Photo Stream on iPhoto and Aperture choosing Photo Stream on the sidebar of both programmes

Cannot access web. Network diagnostics says my internet connection appears to be working correctly

Am running Lion on MacBook. Suddenly cannot access web with Safari or Firefox. Email OK and Network diagnostics says my internet connection appears to be working correctly". No problems with my iMac on same network.

What exactly happens when you try to load a web page?

Cannot access web site hosted on Azure VM

I have created Windows Server 2012R2 VM and after creating VM I have installed IIS and hosted my site and found it is working fine inside the VM.
Then I have added HTTP end point to my VM from azure portal. After creating http end point I cannot access my web site using MyHostName.cloudapp.net.
Can you help me why http end point is not working?
Then I have crated VM with template and there I have defined HTTP endpoint before creating VM.
Finally I found that if I create end point before creating VM then it works fine and if I create endpoint after creating VM then it doesn’t work.
Can you kindly help me to solve this issue (so that end point works properly after creating VM)?
Hasibul Haque,MCC2011,MCPD hasibulhaque.com

Hi,
You can check the port you bind for the website in IIS and make sure you have created endpoint with the correct port. You can also install Telnet client on your local computer and run "telnet xxx.cloudapp.net public_port_in_endpoint" at the command
prompt to see it works.
Have you enable SSL on the website hosted on Azure VM? If yes, please also create an endpoint with port 443 and open that port in Windows Firewall on the VM.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I have a replacement 9.7 Pendo pad, I cannot access the Adobe site

I have a 9.7 Pendopad which has been given to me as a replacement for one where the battry failed. I was able to access the Adobe web site to get access Overdrive Media, I cannot even get access to the Adobe Site to even sign in , I cannot access any par of the site not even support,
so I am doing this on my Laptop. the pad is anAndroid version 4.2.2 . I can access all the other Web sites but not Adobe .
Please has anyone any ideas how to gain access using my Tablet.
Rgards Tony Cole

I don't know why this is happening to you; maybe your Wi-Fi connection is unstable?
I just tried from my Android tablet to login to http://www.adobe.com/, https://www.acrobat.com/, https://www.facebook.com/ - no problem whatsoever.
I also opened Adobe Reader, and I get autoatically connected to Acrobat.com

Cannot access web pages

I have perfectly good Internet but I cannot access any web page. On each page it says this for example on Facebook..."Safari cannot connect to the server. Safari can't open the page http://FB...because dafari can't Connect to the server www.FB..."

Is the Safari browser set to work Offline?
What are you using at the moment to visit the Apple Site?
Do you have any other web browser, such as FireFox, etc?
Have you checked any web-dependant applications or system time server
to see if these are accessing the internet and are getting data flow, live?
Could be the content of certain web sites may require a flash update or
some other thing, if only Safari is acting up. My Safari (in older OS X) is
older, it sees little use; my browsers are many & other newer ones work.
Good luck & happy computing!

Cannot access web page anymore

I can no longer access my banks web page anymore. I was able to get to the page and sign in up to a few days ago.
When I try to get to the page I get a message that says "Safari can’t open the page “https://www.essabank.com/index.cfm?” because the server where this page is located isn’t responding."
I never had this issue before.
I have Firefox and it does not work on that browser either.
I have also tried RockMelt and Opera, again without any luck.
I have searched on the web on several forums and the advice I saw there for similar issues did not work.
I called my bank and they were not having any problems and told me the problem was on my end.
I called Verizon and they tried to help, even took over the computer and they could not get the page to come up.
I can access the page if I use Kproxy, but, I cannot access the bill pay feature that has a totally different error message.
Does anybody know how I can fix this issue and gain access to my bank's page as I did before.
This is extremely important as I need to get to the page and to my bill pay feature without any issues.
As I said, this had been working fine up to about 2 or 3 days ago.
I am using Safari Version 5.0.5 (6533.21.1)
When I go to my bookmarks and previews, the preview for my bank is blank or black with the Safari logo and a lock on it, if this helps...
Any help is greatly appreciated as we really need access to our banks page and features that we use all the time....
Thank you in advance for any help with this problem.....

Greetings,
As you've tried multiple web browsers, try creating a new user account, log out of your current account, log in to the new account and try from the new user to see what happens: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Cheers.

Cannot access web console after install.

Hi all.
The last day has been my first encounter with Oracle VM and it seemed to go fine until I finished. I have installed the latest VM and management tools on a bare bones machine (spec below) but cannot access the console via http://machine:8888/OVA.
I have tried installing using https and without and can gain access to neither the https 4443 or the http 8888 yet I can ssh into it quite easily. The dmesg only really complains that there are no ipv6 routers (understandable) but the xend.log in /var/log/xen does show something strange at the bottom:
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:452) Adding Domain: 0
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:386) number of vcpus to use is 0
[2011-07-13 16:04:45 3011] INFO (SrvServer:177) unix path=/var/lib/xend/xend-socket
[2011-07-13 16:04:45 3011] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_type not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: session.get_all_records not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_record not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_all not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.get_network not found <------ ?????
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MAC not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MTU not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: debug.get_all not found
The spec of the machine started out as:
Athlon 64 x2 3600+
4Gb Ram
2 Nics (1 built in Broadcom & 1 Intel MT)
1 NVidia super duper gt9500
3 Hard Disk, (1 IDE 150gb , 1 SATA 80 & 1 SATA 150 - the IDE is master boot with system on it)
After a few attempts, I removed Video and the Intel card.
The install was done via CD and never complained and in this last install, it only had 1 NIC to choose for the management console.
On this last install I also chose top use none https and therefore the system says I should gain access via http://machine:8888/OVA
I do notice though that in some tutorials, it states alternatives to OVA like OVS etc, all of which I have tried.
Oh and if I netstat -an, it shows it's listening on port 8888.
many thanks, I'm guessing it's some a bit silly that I've over looked but from the way I read the install instructions, you only need the VM and the management Disks to install and you should be able to access via web console?
BTW, systems I'm using as clients to access range from, opera, firefox (Soalris), ie 6,7,8 & 9 from Windows and Windows server. All I get is Internet Explorer Cannot Display This Page.
many Thanks, Mark

Did you install the VM Manager software as a VM hosted by OVS? Make sure the VM is running. It is probably named something like OVM_EL5U4_X86_OVM_MANAGER_PVM. Use "xm list" on the OVS server to see which VMs are running.
If it's not running, then run "xm create /path/to/vm.cfg" the path is probably something like /OVS/running_pool/OVM_EL5U4_X86_OVM_MANAGER_PVM/vm.cfg
Jim

Cannot access web server internally with ea6200

I have the same problem as found in these posts:
http://community.linksys.com/t5/Wireless-Routers/Cannot-access-server-internally/m-p/743969/highligh...
http://community.linksys.com/t5/Wired-Routers/Accessing-Internal-Web-Servers-External-OK-Internal-No...
http://community.linksys.com/t5/Wireless-Routers/EA6500-NAT-Redirection-Bug/td-p/583820/highlight/fa...
Basically, I can't access my local http http server. Like the other posters, this is a new router and I've never had this problem before. I know very little about networking, but I am a developer and need my server to be accessible on my LAN.
The only things I’ve done since setting up the router are:
Setup the wifi security
Enable the media prioritization as a user suggested in the last link I posted.
Forward ports 80 and 8080 – I did this knowing that it made no sense because I only care about local access, but since nothing else with this stupid router makes any sense, I figured, “what the hell!”
I really appreciate any help I can get. I’m thinking about just ordering a new router and sending this PoS back to newegg.

Hi jerred121, I've done a bit of a research about this feature. There is what we call DNS Rebinding Attacks, certain actions will not work from behind the router, this is for your own protection. I know it worked before with older routers.
If you need to access your server locally, you can use the private IP of that device rather than the public IP.

Cannot access web-streaming site

Similar Messages

Maybe you are looking for