Cannot access webserver across network

Hi all,
a little background then on to the problem
small group running 4 work stations and one server. Server used to run apache 2 under OS X 4.7 but we have upgraded to OS X Server tiger 10.4.8
Prior to upgrading the webserver, we could mount the webserver machine on our desktops (apple+K then browse or enter the server's LAN IP) to add files, make changes to static pages etc to the web root directory...nice and easy
But since upgrading to OS X Server, we cannot mount or even see the server machine on the network. We can mount our workstations from the server via apple+k but that is a bit pointless unless we each keep a drive mounted on the server and drop changes into the mounted drives then walk over to the server to move the files around on the actual server machine (which negates the benefits of having a network!
So my question is....can anyone tell me how can we mount our server machine on to individual workstations we can make changes to web pages and directories.
I know some may say FTP but I really dont want to go that way as access via the network (apple+k) was a much quicker and easier method.
thanks,
Tristan

Have you verified that the file sharing service on the server is actually running?
From your description it sounds like the server isn't running, and therefore you're not going to get to mount its volumes.
I haven't heard of problems with services getting turned off as part of an OS upgrade, but anything's possible.
From your description I'm guessing you're using AFP, so check Server Admin to ensure that AFP is running. You might also need to check Workgroup Manager to ensure that the correct set of directories are being shared.

Similar Messages

TS1398 Cannot access my wifi network since updating to OS7

I cannot access my wifi network since updating to OS7. Need wifi to make any changes - even to update for bug fix - help!!

Try power cycling your router. Un plug it, count to 20, plug it back in and let it reboot.
You can also try going into your iPad and 'reset all network settings'.

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

Sony laptop cannot access our wifi network...

Have just installed new airport extreme 5th gen, hardwired to macbook pro and imac. The only device that cannot access our network is our Sony laptop - shows a red x - that it is a "hidden" network. Have not used the closed network setting in airport utility - any advice?

sorry for the trouble, but solved the problem; obviously not very computer savvy, but found that the Sony's networking settings were for our old router (WEP) - reset to WPA2 and works fine.

HT4528 cannot access celluar data network safari

What causes this error in Sarfari: Cannot Access Celluar Data Networ?k

The phone is telling you that it cannot connect to your carrier's Cellular Data Network. Got to Settings>General>Network and make sure enable 3G is ON and Cellular Data is ON.

Cannot access web. Network diagnostics says my internet connection appears to be working correctly

Am running Lion on MacBook. Suddenly cannot access web with Safari or Firefox. Email OK and Network diagnostics says my internet connection appears to be working correctly". No problems with my iMac on same network.

What exactly happens when you try to load a web page?

Laserjet 1320 on win 7 (64bit) - cannot access from a networked XP Pro machine?

I have a Laserjet 1320 and a Officejet 6450 attached to a win 7 (64bit) machine - both work fine.
Have a home workgroup network established with an XP pro machine. Both printers are "shared" etc..
I can access the Offiejet from the XP machine, but cannot get access to the Laserjet. Claims that
the proper Driver cannot be located. Have downloaded the PCl5 driver to the Win 7 machine, but when
I point the XP machine to the HP PCL5 Driver folder on the win 7 machine it still cannot find the proper driver.
Any help will be appreciated.

Hi Don
Thanks for the reply.
The version of Visual Studio being used is 2002 (getting on a bit now).
We had a play about with the way we installed the MSI installer we had created that installs the Crystal Reports runtimes (merge modules) and managed to get it to work on both Windows 7 32bit and 64bit.
The solution was a weird one, but seemed to work (but was different to what I had done before to get it to work). We made sure the MSI was local on the PC and right-clicked the MSI and selected the ''Troubleshoot Compatibility' ' option. Not 100% why this would work, but it seems to have done the trick.
Many thanks for your help.
David.

Changed OVM IP.... cannot access guests over network.

I moved my test OVM server from one datacentre to another. This necessitated a change of IP address for the server and the guests. I was able to update the servers details in the OVS VM management app and all is well. The VM management server did not move. I can start and stop the guests etc etc. However I can no longer access the guest over the network. I can access the guests when I am logged on to the OVS server, I can ping, ssh and do all the things you would expect, I can even ping from inside one guest to another guest so there is, fundamentally, nothing wrong with the guest setups that I can see. It would appear as though packets to/from the guests are not being 'forwarded' or some such. I have triple checked all my network settings from OVS server and 2 guests and cannot get it to work. From inside a guest if I ping the gateway address I get no answer.
Is there something tucked away in the bowels of the xen configuration that still has some old settings ?
Surely I wouldn't have to re-install just because I changed the IP ?
Any help would be appreciated.

Is the MAC-address for the Xen-bridge in vm.cfg on the VM Server identical to the HWADDR in /etc/sysconfig/network-script/ifcfg-ethX ?

After latest security update cannot access my wired network

After the latest security update on my MBP.... no longer can access wired network on laptop. Desktop did not update.... can still access wired network.
Anyone have a fix for the updated MBP?
Thank,
Reed

Is it all applications that these keys don't work?
Also is it a wired keyboard or bluetooth keyboard, either keyboard i'd suggest starting with resetting SMC (helps USB) and PRAM (helps Bluetooth)
Reset SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
Reset PRAM
Resetting your Mac's PRAM and NVRAM
If it's a USB keyboard i'd suggest trying a different USB port and restarting the computer, for a bluetooth keyboard i'd suggest removing the keyboard from Bluetooth Preferences and repairing the keyboard.

Cannot access non Airport network

Hi all,
I'm running a Powerbook G4, whcih connects to its home Airport wireless network with no problems. However, when I try to connect to a different non Airport wireless network I get a message saying there was a problem connecting.
The two most recent I've tried are at a relative's house. The old router didn't let me in, it has been recently changed so I though that might solve the issue but it didn't. It's a D-Link DSL 2640R, used without problems by anyone else who visits, and my Mac can see it as a network whose signal it is receiving. The password is taped to the top of the box. I tried entering this in the password box on my Mac but was denied access. Then tried with the password in quotation marks, again denied. Looked on some forums which suggested using HEX. I translated the (eight character) password into a (sixteen character) HEX key, but since my Mac needed either a 10 or 26 character HEX key, went back to the forums and found the suggestion of preceeding the HEX key with a $, # or 0x. None of this worked either.
I seemed to find lots of postings from people with the same kind of issue, does anyone have any further ideas please ?
Thanks,
Ivan

If its lower case, it means it can see the netwoirk but can't connect. Uppercase is connected. Thanks though, it seemed to resolve itself spontaneously
www.whatsgoodblog.com
What's Good is your one stop site reviews about everything.
http://www.whatsgoodblog.com/featured/how-to-install-beta-os-or-other-carrier-os-on-blackberry-with-desktop-manager-for-mac/

Cannot install iTunes on win xp. Cannot access file on network and I do not have a network. Looking for a file iTunes.msi. Anybody help me

iTunes will not install on windows xp del pc install cannot acess mile iTunes.msi. Help

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I cannot access the gsm network

The iphone states that the network is unavailable but at the same time I have good connection on my ipad (same provider). How can I solve this?

Hi and Welcome to the Forums!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your wireless service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I cannot access link across the top 1 inch of the webpage and when pdf's download, the 1 inch across the top is white

web pages do not allow me to access login information or links to important parts of the website. When I download a pdf from a site, the same top portion (about 1 inch or so) is white.

Recently both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Cannot DNS resolve across networks using host name only (not fqdn)

Evening all,
I currently run domain network (MS Server 08 - dhcp) on my firewall interface1 and WiFi network on interface2 (dhcp provided by router itself). On my Wifi dhcp I am advertising as DNS server that of the domain, but wifi clients can resolve only FQDN domain
client names not host names ("domainclient.domain.local" - not "domainclient").
If on my wifi client I change NIC properties -> IPV4->Advance->DNS-> append these suffixes, and put the domain.local, then it works but need to be able to work without manual changes to each client.
Any ideas?
Many thanks,
Argyris

Hi,
Additional, please confirm your DHCP option have configure the correct WINS server.
The related KB:
Understanding DNS Client Settings
http://technet.microsoft.com/en-us/library/cc754152.aspx
Configuring TCP/IP networking
http://msdn.microsoft.com/en-us/library/dd163570.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have C6180 and 6510 which cannot access a wireless network thru a Dlink DI-624 FIOS router.

If the wrong passphrase is entered, an appropriate message is displayed on the printer. Since no message is displayed, the passphrase must be correct. If I set the rounter to an unprotected mode, everything works correctly. Both printers behave in the same fashion stating a FAIL on No Filtering; though filtering is turned off. Any sugggestions would be appreciated.

What type of encryption? Restart your router just before trying to connect the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Cannot access webserver across network

Similar Messages

Maybe you are looking for