Cannot access Welcome page anymore

Posted: Apr 19, 2007 8:12 AM
Click to reply to this topic Reply email Email
I am trying to access our site and I am getting the following. We were able to access it about 6 weeks ago.
It seems like eveything is in order but the iTuens U page for our domain does not load at all.
iTunes U Access Debugging
Received
Destination cdnet.cod.edu
Identity "Administrator" () []
Credentials Administrator@urn:mace:itunesu.com:sites:cdnet.cod.edu
Time 1176990393
Signature 4d0cddabd4b91f6d6c460f3a73866958d49086910f455d8230d0bbaae560f1c6
Analysis
The destination string is valid and the corresponding destination item was found.
The identity string is valid and provides the following information:
Display Name Administrator
Email Address None
Username None
User Identifier None
The credential string is valid and contains the following recognized credential:
Administrator@urn:mace:itunesu.com:sites:cdnet.cod.edu
The time string is valid and corresponds to 2007-04-19 13:46:33Z.
The signature string is valid.
Access
Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
In addition, the following 2 credentials were automatically added by iTunes U:
All@urn:mace:itunesu.com:sites:cdnet.cod.edu
Authenticated@urn:mace:itunesu.com:sites:cdnet.cod.edu
With these credentials, you have browsing, downloading, uploading, and editing access to the requested destination.

It sounds like you have debugging turned on. This causes the debug page to load. Check and make sure the code you have has the debug URL turned off.

Similar Messages

Cannot access web page anymore

I can no longer access my banks web page anymore. I was able to get to the page and sign in up to a few days ago.
When I try to get to the page I get a message that says "Safari can’t open the page “https://www.essabank.com/index.cfm?” because the server where this page is located isn’t responding."
I never had this issue before.
I have Firefox and it does not work on that browser either.
I have also tried RockMelt and Opera, again without any luck.
I have searched on the web on several forums and the advice I saw there for similar issues did not work.
I called my bank and they were not having any problems and told me the problem was on my end.
I called Verizon and they tried to help, even took over the computer and they could not get the page to come up.
I can access the page if I use Kproxy, but, I cannot access the bill pay feature that has a totally different error message.
Does anybody know how I can fix this issue and gain access to my bank's page as I did before.
This is extremely important as I need to get to the page and to my bill pay feature without any issues.
As I said, this had been working fine up to about 2 or 3 days ago.
I am using Safari Version 5.0.5 (6533.21.1)
When I go to my bookmarks and previews, the preview for my bank is blank or black with the Safari logo and a lock on it, if this helps...
Any help is greatly appreciated as we really need access to our banks page and features that we use all the time....
Thank you in advance for any help with this problem.....

Greetings,
As you've tried multiple web browsers, try creating a new user account, log out of your current account, log in to the new account and try from the new user to see what happens: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Cheers.

Skype payment error. "You cannot access this page....

Hi,
I'm trying to purchase $10 worth of Skypre credit. I entered my card information and clicked next and this error massage appeared.
You cannot access this page.
This may be due to one of two reasons:
1. The FI you are trying to access is deactivated
2. The access to the FI is restricted for specific IP addresses, and your address is not one of them.
Does anyone have a solution?

OK. So this is an ongoing problem and has been for over 1 month. The only way I could submit a payment is using paypal. I tried a mastercard and Visa - neither worked. Use paypal or transfer a bank payment - that is your best chance of updating it. Apparently their technicians are working very hard to fix this but it's still not working. Changing web browsers, computers etc don't work. Good luck. It's taken me 3 weeks to finally give up and use paypal.

HT202879 I apparently have the newest Pages version uploaded and installed. But I cannot access it. I do not find any agreement or anything which needs approval. I cannot access my pages documents. Message says an upgrade is required. When ITunes is o

I cannot access my pages documents after upgrade to OSX 10.9.1. Pages and Numbers show they are upgraded also, but when I try to access the existing documents it says I need an upgraded version. I cannot upgrade because Apps says I already have. But the apps continue to report that they are in the older version. OSX is updated. I've tried to accept user agreements etc but no luck. HELP

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Since the update to iOS 7.0.2 I have only access to my email when there is a new massage. As as massages have been read my name turns light gray and I cannot access my email anymore.

Since the update to iOS 7.0.2 I have only access to my email when there is a new massage. As as massages have been read my name turns light gray and I cannot access my email anymore. I have 2 other email addresses and they work properly.

I am in the same predicament...any resolve? Other than possibly taking it into the shop?

Cannot access hotmail page

I cannot access hotmail page. Get dub123 on address bar. I reset safari and get as far as sign in but then blank again. Need it for business. Please help

Go to Safari > Preferences > Privacy
Cick: Remove All Website Data
Now press Command + Option + E to empty the cache.
Quit and relaunch Safari to test.

Cannot access the page

Cannot access the page to purchase the creative cloud plan on macbook pro. tried everything but won't open. please help

Hi hokhevi zhimomi,
Please provide the below mentioned information so that we can assist you appropriately.
Browser name and version:
Mac OS version:
Kindly try the below suggestions.
    1. Try different browser.
    2. Try different device/machine.
    3. Try different network.
Thanks,
Atul Saini

Cannot access my emails anymore from my iphone 4s.

Cannot access my emails anymore from my iphone 4s. Shut down phone and even rebooted to no avail. Went into settings and deleted the account but it came right back. Help.

Contact the email provider.

Cannot access web pages

I have perfectly good Internet but I cannot access any web page. On each page it says this for example on Facebook..."Safari cannot connect to the server. Safari can't open the page http://FB...because dafari can't Connect to the server www.FB..."

Is the Safari browser set to work Offline?
What are you using at the moment to visit the Apple Site?
Do you have any other web browser, such as FireFox, etc?
Have you checked any web-dependant applications or system time server
to see if these are accessing the internet and are getting data flow, live?
Could be the content of certain web sites may require a flash update or
some other thing, if only Safari is acting up. My Safari (in older OS X) is
older, it sees little use; my browsers are many & other newer ones work.
Good luck & happy computing!

Can't access welcome page after installing 10gAs 10.1.2.0.2

I've installed 10gAs 10.1.2.0.2 on Unix and am trying to check my installation by accessing the welcome page. The url I'm using is http://hostname:7777. I've checked the httpd.conf file to confirm the port and even the file at ORACLE_HOME/install/readme.txt points me to the same url. I've looked at the doc at http://download.oracle.com/docs/cd/B31017_01/core.1013/b28940/getting.htm#i1014519
Also, when I try sqlplus / as sysdba, I get sqlplus not found.
I've set LD_LIBRARY_PATH=O_H/lib and SHLIB_PATH=O_H/lib32
Any suggestions?

Run the following in your terminal where you have a sh shell.
export ORACLE_HOME= <give here the location of Oracle Infrastructure Home>
cd $ORACLE_HOME
sqlplus / as sysdba
## if you continue to get problems, then see the following file;
cat $ORACLE_HOME/network/ADMIN/sqlnet.ora
Check if you have a line with the following attribute:
SQLNET.AUTHENTICATION_SERVICES
make sure it is not missing, nor reporting a none value. If it does, change it to the following:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Save the file. Now restart infrastructure:
cd $ORACLE_HOME
opmn/bin/opmnctl stopall
opmn/bin/opmnctl startall
## now try getting into the database again.
sqlplus / as sysdba
hope that helps!

Cannot access setup page.

My wrt54g works but I cannot access the setup page. A partial page does appear but with no tabs. I am using W98SE. None of the available download software accepts w98 and this forum is definitely a work in progress.

I have and had the same problem now with 2 different versions of this model. What I have found is that it often messes up when you access the setup page with a 100 MB/Sec connection! Soetimes it works fine, others nyet. Totally wierd but the proof is in the pudding. Go into Network Connections, select "Local Area Connections" and right click for "Properties". Along side of "Connect Using" box on top is the "Configure" button. Click on that and then select the "Advance" tab. Somewhere under the "Property" list is an item for connection speed and type. Most of the time it is maxed out. Select that item and in teh value list box find "10 MB/Sec Full Duplex". Click OK to back completely out and you are done! Sometimes you may have to unplug the router to reset both ends. If this is your only connection to a network, like at home, don't even worry about reseting things back to 100 Mb/Sec. 10 Mb/Sec is plenty fast enough for the internet (Faster then the cable modem is feeding you). If you copy massive files between home PC's you might notice a slight speed hit. By massive I mean 10's of MegaBytes or more.

Cannot access APEX pages from other IP in the same network

Hi,
I installed APEX 3.0 on Oracle XE (Windows OS). The PC I installed has a static IP (no DHCP and DHCP servie is stopped).
I started the HTTP server and I am able to access the XE database home page and the APEX developer page and admin page. This PC has a static IP too.
When I tried to access the APEX page from another PC. It is not loading the page.
When tried using Internet Explorer it says "Internet Explorer Cannot display the page"
Please let me know whether I missed any configurations to the access the page from another IP.
Thanks.
Niko

Hi,
Most likly the cause is windows firewall. Try the following:
1 - from Control panel select windows firewall
2 - click on the exception tab
3 - Click Add port
4 - for name enter yhe name you want (APEX)
5 - For port number enter APEX prot number
Hope that will solve your problem
Regards,
Ribhi

Cannot access login page and no wireless signal

Hello, I am using a WRT54G ver 2 router, everything was working fine until a couple of days, when just out of the blue my wifi stopped working, the wireless light does not lit on the router, I tried resetting, disconnecting the router and modem, and upgrading the firmware(which I cannot because I cannot access the setup page) and nothing seems to work, hopefully someone here can help me,
Thank you
JB

After a firmware upgrade you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt, or your firewall is still turned on. In this case, turn off the firewall, and if you still cannot complete step 10, then use the Linksys tftp.exe program to try to reload your router with the latest firmware. (If you have already reloaded the firmware with tftp.exe, and you still cannot complete step 10, then the router is dead.) After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 03-26-2008 02:10 AM

Cannot access shared folders anymore....

Hi,
We have a naughty problem at the office for accessing shared folders .
We use G5 Xserve + Xraid serving home access to 12 macs.
Our problem started when we updated all machines to 10.5.2 (nor did we have a problem with 10.5.1 or with 10.5.0).
All machines login correctly, fetch their folders with their home accesses located in the Xserve, as allways did, BUT :
·Almost all the machines running Leopard (except two) CANNOT access shared items. They get Error -5002
·The old machines running Tiger (G3 Imac's) acess shared items without problem.
So after many weeks doing multiple tests, we got the following conclusions:
·Problem is not server related.
·Problem si related to Leopard clients , although not in all
·Problem is not related to the machine, but with the account (accounts that can access shared items do it on any machine, and accounts that can't, don't do it on any machine)
·It seems that the trouble is related somewhat with Kerberos authentication, but it's not related to tickets (renewing them is no use)
·If we create new account with new name, it can access shared items
·If we create new account with same name that of the faulty one (renaming the later), it CANNOT access shared items.
We have got a problem in the office, and no clue of solving it.... Have read all over apple discussions over the internet, and although some people have similar issues, they are not as close as ours....
And none of the solutions proposed have solved the problem.
Any ideas would be greatly appreciated, cause we are starting to get desperate
Thanks everyone.

new update:
we are able to connect to remote shared folders with a different remote server (dual G4) from every machine
machines who can connect to local server are INTELs, the one who can't are PPCs
makes any sense to anyone?¿

Cannot Access My AP1200 Anymore????

Hi,
I have configured my AP1200 fine and it was working great. Today, I am trying to set up some more stuff but cannot access it through web.
Switch port shows me a lot of errors and collisions. I do not know what excatily is happening here, why those errors/collisions ?
Can some help me to explain that How can I know get in to my AP1200 or do I need to do all the settings again..
Pls help....
Thanks

Your best bet is to connect via the console port.
Switch port shows me a lot of errors and collisions. I do not know what excatily is happening here, why those errors/collisions ?
Look for a speed or duplex mismatch between the swtich port and AP I would set both the switch and the AP to 10Mb half duplex. If you still see these errors then try an new cable and then another port on the switch to see if the errors follow ??

Cannot access Welcome page anymore

Similar Messages

Maybe you are looking for