Cannot access Wireless DSL connection after downloading Garage Instruments/

Yesterday Feb 14. I downloaded the Music Garage Instruments along with one other update which I don't know the name of... this is to my new IMac just received in December
This morning my computer did not connect with the wireless modem I have for DSL and it kept rejecting the password from the modem.
HELP! Did this disconnect something and how do I get this back?

Welcome to the discussions, kfig143.
This is the Mail and Address Book Forum for the Tiger OS. You are more likely to get help with your problem if you ask in one of the Leopard forums.
AK

Similar Messages

Lost my wireless network connection after downloading wi-fi

After receiving email saying I was eligible for verizon wifi- I registered for it on my desktop that was networked wirelessly with a Linksys adapter. Not knowing the only way the wifi works is with a verizon router!
I have a new netgear router. All other wireless connection to my home network still work but the desktop that downloaded the registration (HAHA) and the new vz pc helper whatever. Now my linksys adapter isnt recognized anymore. I even tried it on another pc? Is there something I can do to make my desktop recognize the wireless network adapter again?
I have removed and reinstalled linksys with no luck. PC wont even attempt to find wireless connection?
Ugggggg I hope this didn't fry my adapter!

Hi Blgoodie,
I have only the vaguest idea what's wrong. But a system restore should fix this problem, so try that first.

Computer dsl connection after router hookup

I am very confused. Have a home computer with dsl connection. I went thru the CD directions and hooked up my wireless router. Everything seemed fine, but when I went to go to the internet (aol mail, etc.) my dsl connection was gone. I lost my dsl connection. Couldn't get ANY help at the 800 tech support. So i unplugged the router wires and put everything back the way it was. Then I could get dsl connection, and went to the online website 24-hour support. Told them everything that happened, and all I got was "I am sorry for the inconvenience", then silence.
Why do I lose my regular dsl connection after I hook up the wireless router??? Am i doing something wrong? HELP!

Hey try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!
Configuration for DSL connection:-
Before doing the following steps, you have to connect the modem to the
router's Internet Port and the computer to the Ethernet Port Number 1.
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button.
===================================================================
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
Try going online
If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
Click save settings....
Look for WAN IP address again under status page ...

HT1725 I purchased a book and although it is shown in my library the word "paused" is written across it and I cannot access. i presume the download did not complete, but can't seem to fix it.

I purchased a book in advance. It is now in my library, but the word "paused" appears across the book and I cannot access. I assume the download did not complete, but I cannot seem to fix it. Does anyone know what the problem could be?

Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
Then reset: hold down the home button along with the power button until you see the Apple, then let go.

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

I cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

i cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

Hello nguyendexter2012,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Best of luck,
Mario

IPhone 3GS cannot access to 3G network after upgrading to OS 5

My iPhone 3GS cannot access the 3G network after upgrading to OS5. I have checked with my operator and shows that their 3G network is working fine. Only cannot access through the phone. When I enable 3G, there will be no service for my phone. Wifi is working fine.
Any idea how to resolve this?

zlwczr wrote:
Thanks, I will try this method. After restore and syn, will it automatically upgrade back to OS5?
No. If you have 5.0.1, then you will get 5.0.1 back. Restoring should still fix it though. I would prefer to have you back up to iCloud, because there are many known issues/errors when trying to restore via iTunes on iOS 5 or later.

I cannot access to my account after recovery OS by time machine.

I cannot access to my account after recovery OS by time machine. My MBP is 13" Mid-2009, I purchesed the Mountain Lion on the Apps Store long ago, the problem occured when i was trying to upgrade to SSD. I used recovery DVD then Migration Assistant.
After restarting system, I try to access my account but the password is not right every time i try to. Why??? What should i do?

Boot into the Recovery HD and use the password reset utility.
Open Terminal from Utilities.
Type resetpassword and hit return
Choose your Hard disk, then user, then follow the screen prompts to reset the password.

Can't access i tunes store after downloading ios7 on i phone 5

can't access i tunes store after downloading ios 7.0.1

I think that you will find your answer amongst the other "problem reports" for Safari 5.1 and iTunes 10.4. If you can use your Time Machine to revert to the day before you installed iTunes 10.4 (and Safari 5.1 - if you updated Safari too) you should wait for answers to other's complaints. There is a little known maxim at Mac; don't update an app or the operating system until you find no further problems reported at MacFixit, finetunedmac and Apple's own Support forums.

Cannot access my Iphone 3gs after upgrading to 5.01

Hi,
I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
Software and I accept.
That was the mistake I made as it upgraded to 5.01 and I cannot access
myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
"There is no Sim card installed in the Iphone your are attempting to
activate"
I tired the following with no success.
Itried downgrading from 5.01 to 4.33 by downloading firmware from google. Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
Please help.
Thanksyou,
Charles.

Is the SIM that is installed from the carrier the device is locked to?
Was the device hacked or jailbroken? Possibly to unlock the device?

I cannot access my app store after upgrading to Mac Os10.8.2

I have problem accessing to the software update or the app store. This all happen after i upgrade to MAc OS 10.8.2 and certain software upate. Now i cant access the app store. Everytime i click on it, it just bounce for a few second then stop. Another issue is 'finder'. I cannot access the download or my folder in 'finders'. Help....

Yes, if you can follow mcgerbs advice and re-install OS X. There isn't any archive & install selection in 10.8.
Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First run Disk Utility Repair Disk, if you get errors run until no errors reported or reports "the disk cannot be fixed". Then, choose Reinstall OS X. This will be an install "in place" and shouldn't effect any of your own data or settings.

D-Link DIR-615 cannot access wirelessly with iPhone 3G

I've added another router to my home to get better range in the far corners of the house. I added a D-Link DIR-615 hard wired to my first router. I can access this new router both by cable and wirelessly with my laptop, but not wirelessly with my iPhone.
I've tried making the password all letters, (saw a post that said numbers don't work??) and even taking out the password and leaving it blank. The iPhone sees the router and identifies it by name. When I try connecting, after entering the password, it says "unable to connect to network". IO can connect to my first router with the iPhone.
Any suggestions? I'm using WEP for encription, except when I tried it with no passwords! Thanks!

A few ideas:
Often the power on sequence is the determining factor in if/how DHCP will work. Especially when it comes to consumer-grade cable modems and routers. Try different power on sequences.
Try to figure out if your cable modem is storing and enforcing the MAC address of one of your devices. Take the router out of the picture, attach your MBP, and see if it works. Then leave the modem on, unhook the MBP, and plug in a Windows laptop. If it doesn't work, then your modem wants/needs to only see one MAC address. If this is the case, look in your routers settings for "Spoof this computer's MAC Address" and you should be good to go.
One trick I've used in the past is to assign an entirely new subnet for the router to hand out. For example if it used to give out 192.168.1.x, the new subnet would be set to 10.1.1.x. This forces every system and rebuild its caches. Too many times routers, controllers, OSes, apps, and even hardware like phones keep caches to help speed things up. It's not always obvious how to reset these. But by switching subnets you force every device to rebuild the caches.
Good luck.

Cannot Access the Service Partition after installing Lenovo Driver and Application Installation

I recently upgraded my Lenovo 3000 H210, M/T 5355-2NU from Windows Vista Home Premium (64-bit) to Windows 7 Home Premium (64-bit) with the media received through the Windows 7 Home Premium Upgrade Fulfillment Program.
I installed the 64-bit version of the Common Components Installation v1.0.0.8 and restarted the computer and then installed the 64-bit version of the Lenovo Driver and Application Installation program, v5.1.0.0900. After
restarting the computer, I receive a message box stating "Cannot access the Service Partition". If I click on
Lenovo Driver and Application Installation on the Start Menu, I receive an error that the installation has not
completed. Restart to complete the installation. If I restart the computer, I am back to the first error.
Any idea how to resolve this situation?
Any help is greatly appreciated. Thanks in advance.
-Larry

I am having the exact same problem. It's driving me nuts. I also downloaded and attempted to reinstall the factory software from Lenovo's site. It installs but will not launch, giving me the following error message: "This software is for intallation on a Lenovo computer." Or words to that effect.
Hopefully someone knows the answer. Tried tech support twice. Ugh... Thanks in advance.
Lenovo 3000 H210 Desktop, 64-bit, Intel E5200 Duo Core, 4GB RAM, 320 GB Hard Drive

Still cannot access time machine backups after Yosemite install

Can anyone tell me what to do to be able to access my time machine backups. When I enter time machine nothing except apps and desktop are accessable. Thus I cannot restore anything that was "backed up" even this morning, much less any other day this year. Yosemite was installed on Oct. 19, took 2 days to download to an 2013 iMac. The first time machine backup took over 24 hours. I have made 1 backup per day since, only problem is that I cannot access any of this data. Please help me.

A bit more information would help figure out the problem. Maybe a screen shot of what you're seeing or not seeing (use Command+shift+4 to save an area of the screen or a window -type space first to capture an entire window- to a file and then attach that file to your posting reply). You might look at the Console app to get more information about what actually happened during your backups - suggest putting "backupd" (without the quotes) in the search field at the top right of window in Console - with the "All Messages" query selected on the left part of the window). Console is located in the /Applications/Utilities folder. After you enter the backupd in the search field only those messages that contain that string will appear which helps a lot since so many messages are normally shown without any search field string.
Depending on how long ago the backups happened, you might need to select previous versions of the system log files - they get archived and compressed to files like system.log.0.bz2 or system.log.1.bz2 (these are in the /var/log query choice if you don't see them in the existing query choices - just click on the triangle to the left of the "/Var/log" entry if needed). Console knows how to show the messages that are in these compressed files, so you don't need to do anything other than click on the query name.
Also if you look in TimeMachine in System Preferences are there any exclusions (click on the Options button in TM System Preferences to show what the existing exclusions are)? A screen shot of those would be helpful also.
Is there only one drive with the single Mac OS partition on it?
Hope this helps a bit...

I added Gmail to my iTunes store/account. Now I cannot access the Store and after I enter my Apple Id password it tell me I need to verify my Gmail acct, press ok for details. Once I press ok, the screen shows my Gmail address and underneath it states m

I added Gmail to my iTunes store/account. My gmail account is: [email protected] and it shows up on the settings in iTunes, and my account. The problem is I cannot access the store with this ID. A response says: You have not verified your ID, press ok to review instructions to verify your ID.
Reply to this is: An email has been sent to the address below with a link to verify your Apple ID. Make sure to check your email and follow the link to complete the creation of your AppleID.
Beneath my email address:
Your Email has already been validated successfully. Thank you.
Please HELP.
I am using:
Windows XP
Internet Explorer 9
Norton 360
iPhone 4
Google toolbar on my computer.

Hi Michael,
Yes it is now resolved but not after I send iTunes a request for help and explaining the problem. They send a first reply explaining how I needed to verify my account and gave me the link to do that. You and I know that this did not help, so I replied telling them that this was not working and iTunes did the reset for me.
You may want to open a help ticket with iTunes help. That is the only way it works.
Regards,
Gloria J Bisson

Cannot access Wireless DSL connection after downloading Garage Instruments/

Similar Messages

Maybe you are looking for