Cannot activate a Form in the Form Builder

Hello,
I have a problem with activating a Form and I don't know the reason of this error. I get the following message after an activation in vain:
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101).
What's the cause of this message?
Thanks and Regards

Hi Sergej,
Check the below things are working.
(1). Check whether ADS destination is available or not.
     If available, go to (2).
     If Not, Create ADS destination .
(2) Run the program FP_PDF_TEST_00 in SE38. (Enter destination ADS)
     If the output is ADS version number (some thing like 705.20060414080730.290845), go to step (3).
     If not, Check the setup in sap and ADS configurations.
(3) Run the program FP_TEST_00 in SE38 and retain the default value in the selection screen and execute it .
     If the output is PDF document, you setup is correct. You are set to work in PDF-Based print forms.
     If some error receive, you need to check all set ups in SAP.
Thanks,
Ramakrishna

Similar Messages

  • Cannot use XML Forms Builder - HTTP response: 500 - Internal Server Error

    Hi,
    I am trying to use XML Forms Builder, have added the corresponding role to my profile and when I create a new application or do anything I get the following error popup:
    HTTP response: 500 - Internal Server Error.
    What should I do ??
    Thank you for your help.
    Thibault Schalck

    Hi,
    Check the below link for environment checking of XML Form Builder
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/9c8f411467ac5fe10000000a1550b0/frameset.htm
    Raghu

  • Cannot activate pf-status in the revised standard program

    Hello Gurus,
    I have to revise the revised program of VF04. My problem is I cannot activate the pf-status below.
    p_status  = 'SELK'
    Your help is highly appreciated.  Thank you
    Regards.

    Hi Sap FAn,
    Tried you suggestion but im getting an error
    "Error writing entry in the SMODILOG" at CA4 O from DE to EN: Zprogram..
    did i miss any procedure.
    thanks again

  • My iPad is Disabled and I cannot input my passcode.  how do i do that?  I have tried to connect to iTunes and it will not connect via computer connection as I cannot activate my iPad with the pass code.  what do i do?

    My iPad is disabled and I can not input my passcode.  what do i need to do?  I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad. 

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it

  • Vs2010 azure project remove instead of unload now cannot find a part of the path build error

    I know this isn't a vs online question but I wasn't sure where else to post this one...
    I have an azure project built in vs2010 with a web role and worker role project. I accidently removed the worker role project then re added through 'add existing project'. Now when I try and build I get
    Error 1   Could not find a part of the path 'C:\Users\Mat\Documents\Visual Studio 2010\Projects\MvcApplication7 - Copy (4)\CubeCloud1.Azure\WorkerRole1\'.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure
    Tools\1.8\Microsoft.WindowsAzure.targets    987 5   CubeCloud1.Azure
    Line 987 is the start of the  element.
    Looking at the path, the folder WorkerRole1 doesn't exist but looking at back ups of this project it doesn't exist in them either.
    I've tried adding the WorkerRole1 folder but then I get  Error 102 CloudServices38 : The entrypoint dll is not defined for worker role WorkerRole1.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\1.8\Microsoft.WindowsAzure.targets   
    987 5   CubeCloud1.Azure
    I'm not sure going down the path of adding this folder anyway is the correct solution (I could be wrong of course).
    thanks,

    I don't know why this worked but I made a copy of the solution. When I opened the solution it had lost a reference to one dll (Windows Storage I think). I added that, then it builds ok now.

  • Azure project remove instead of unload now cannot find a part of the path build error

    I have an azure project built in vs2010 with a web role and worker role project. I accidently removed the worker role project then re added through 'add existing project'. Now when I try and build I get
    Error 1   Could not find a part of the path 'C:\Users\Mat\Documents\Visual Studio 2010\Projects\MvcApplication7 - Copy (4)\CubeCloud1.Azure\WorkerRole1\'.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure
    Tools\1.8\Microsoft.WindowsAzure.targets    987 5   CubeCloud1.Azure
    Line 987 is the start of the  element.
    Looking at the path, the folder WorkerRole1 doesn't exist but looking at back ups of this project it doesn't exist in them either.
    I've tried adding the WorkerRole1 folder but then I get  Error 102 CloudServices38 : The entrypoint dll is not defined for worker role WorkerRole1.    C:\Program Files\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\1.8\Microsoft.WindowsAzure.targets   
    987 5   CubeCloud1.Azure
    I'm not sure going down the path of adding this folder anyway is the correct solution (I could be wrong of course).
    thanks,

    Hi mattech13,
    Thank you for posting in MSDN forum.
    According to your description, it seems that you have solved this issue now.
    Since
    this forum is to discuss: Visual
    Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    Based
    on your issue,
    it is related to the Azure, so we will move this case to the Azure forum:https://social.msdn.microsoft.com/forums/azure/en-US/home?category=windowsazureplatform
    In addition, if
    you have any issues about this azure,I
    suggest you can post this issue directly to the Azure forum, you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I uninstalled CS6 without deactivating it and now I cannot activate it again on the same MacBook. What can I do?

    I have installed the programs again, but the "deactivate" button is gray.

    if deactivate is grayed, it is activated.

  • I cannot activate ADE with the same ID

    I cannot activate Digital Editions with the same ID.

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Cannot activate Windows Server 2012 R2 Standard

    Dear all,
    we have call Microsoft register hotline, and then do the procedure slui 3 , slui 4 , still cannot activate
    my colleague use the iso setup disc , the server 1 CPU 4 Core.
    SW_DVD9_Windows_Svr_Std_and_DataCtr_2012_R2_64Bit_English_-2_Core_MLF_X19-31419.ISO
    What can I  do? Thank You!
    https://social.technet.microsoft.com/Forums/getfile/603585

    Trial comes with key preinstalled. You should be able to activate trial in 10 days.
    What is the output from
    slmgr /dlv
    What is the response to
    slmgr -ato
    HAVE YOU USED ELEVATED COMMAND PROMPT? I MEAN Run as Administrator. Being logged as administrator does not help to to activate your trial.
    Rgds
    Milos

  • Cann't open a *.fmb file (with the same version of Form Builder)

    Hello everybody,
    My Form Builder 6.0 cann't open a *.fmb file, created with the same version, even with the same Form Builder tool.
    I worked for long time ago at this module, I saved it many times, I compiled it and it worked very well. But last time it didn't want to work(open). I couldn't open it (FRM-10043: Cannot open file). But the corresponding *.fmx file is working.
    Here is some additional information:
    When I try to rename or replace this file an Windows "There has been a sharing violation. The source or destination file may be in use" error appear. But that file is not in use and it is not shared. Is this helpfull?
    Is there something which can be done?
    Thanks in advance,
    Euge

    Sure. I did that many times. I checked the volume for the errors. I interrupted any share connection. I tried to change the extension of the file and to change it again to *.fmb(I did this on a copy of that file).

  • Open a form with space on the path with form builder from a batch

    Hi,
    I cannot open a form from a batch on Windows if the absolute path contains spaces.
    For example, if I try to open a form in "C:\" from cmd with C:\ORANT\bin\ifbld60.exe C:\Form.fmb, I have no problem, if I try to open a form in "C:\Documents and Settings" with C:\ORANT\bin\ifbld60.exe "C:\Documents and Settings\Form.fmb" or C:\ORANT\bin\ifbld60.exe C:\Documents and Settings\Form.fmb, I have some dialog with info and the error FRM-90927 and form builder doesn't start.
    Thank you,
    tom
    Edited by: 912104 on 16-ago-2012 3.17 - title

    Hi,
    >
    I cannot open a form from a batch on Windows if the absolute path contains spaces.
    For example, if I try to open a form in "C:\" from cmd with C:\ORANT\bin\ifbld60.exe C:\Form.fmb, I have no problem, if I try to open a form in "C:\Documents and Settings" with C:\ORANT\bin\ifbld60.exe "C:\Documents and Settings\Form.fmb" or C:\ORANT\bin\ifbld60.exe C:\Documents and Settings\Form.fmb, I have some dialog with info and the error FRM-90927 and form builder doesn't start.
    >
    Why is that you want to open a FMB in Form Builder with a Batch file?
    Is it that your application has only one FMB and that you work with only one FMB all the time?
    Cheers,
    PS: And if you must open the FMB through a batch file then look up the Form Builder Help for "Command Line options". It is an excellent resource.
    Edited by: Prabodh on Aug 16, 2012 3:06 PM

  • How can I specify the path in Form Builder 9.0

    Hi, everyone,
    could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
    besides, when I run a form, sometime there will be a warnig:
    Please acknowledge message
    what's that meaning?
    thank you very much for your great help

    Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
    but, when I open my form, it always suggest me:
    FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
    so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
    have a good weekend :-)

  • How to make changes to .fmx file using the form builder

    Hi all
    I have a .fmx form in the AR_TOP directory of the Oracle E-business suite.Now I need to make some changes to the form and compile it and place it back .But the .fmx file didnot open using the form builder 6i .So is there any way that i can convert the .fmx to .fmb so that I can open the form using the Form builder 6i??
    I have the toad s/w installed but I dont know how to open the form using the Toad.
    Thanks

    I have a .fmx formYou cannot open a fmx-file with any developer tool. To make changes to the source-code you need the fmb-file and open it witj Forms-builder
    AR_TOP -directory of the Oracle E-business suiteBe careful when changing source-code in the ebusiness-suite. If its a module from oracle i don't if its supported if you do changes in it.
    I have the toad s/w installed but I dont know how to open the form using the Toad.Toad is definitely the wrong tool for forms-modules.

  • FRM-10242:  Cannot call linked-in Forms from Form Builder. error

    FRM-10242: Cannot call linked-in Forms from Form Builder.
    Cause: The menu designer specified a call to linked-in Forms from within Form Builder.
    Action: Notify your DBA.
    does anyone know why this happens.
    I have this main-menu.. and when i click on one of the submenus which should call the form....i get this error.

    Same issue here... Been trying to get this working since a week now. I tried all the solutions like memory heap and all but no luck.
    One thing that I would like to know is that, in some threads the resolution was to recompile the INS_FORMS.MK file under /forms/lib32 but with my installation I don't have that "lib32" folder under /forms/ and I can not even find that file anywhere in my entire installation.
    I am using 12.1.1 on Windows Server 2008.
    Any help or guidelines is greatly appreciated.
    Santhosh.

  • 10g Forms Builder with error "cannot attach library" opening R12 fmb file

    Hi all,
    I had set up my Forms Builder with all the necessary PLL and FMB files for developing R12 custom forms. I have used the builder to do few custom PLLs and one custom form, and I did not have any problem opening seeded Oracle Forms. Today when I need to enhance that custom form I did 2 weeks ago and I opened Forms Builder, I got the error "Cannot attach library.." for APPCORE, APPDAYPK, etc.. Same error for opening TEMPLATE.fmb.
    I have done these to troubleshoot:
    1) I verified my Windows XP registry "FORMS_PATH" to include the folder where I store all the PLLs and FMBs.
    2) I updated default.env to include that file path.
    3) I create shortcut to Forms Builder and put folder path with PLLs under the "Start in" field of the shortcut.
    4) I rebooted my machine after changing the registry
    5) I moved the folder with PLLs to under C:; I seperate PLL to "resource" sub-folder and FMB to forms/US/ sub-folder just like the server structure.
    6) I install one more copy of Developer 10G Suite and set up the registry.
    None of these work and the key is it used to work with no issue. Any suggestions what may be the problems?
    Thanks!
    Mike.

    Turned out I reloaded all the $AU_TOP forms and PLLs to my desktop and it worked fine. I think I did not FTP correctly the first time.

Maybe you are looking for