Cannot activate "find me" on my macbook air its says update recovery systeme. But I checked and i dont have any update. Help please!
Cannot activate "find me" on my macbook air its says update recovery systeme. But I checked and i dont have any update. Help please!
Same problem here! MacBookPro with SSD. 10.7.2
Disk Utility didn't find any problems.
Similar Messages
-
i have a macbook purchased in dec 2009 with OS 10.6.8, i can't install Mavericks as it is not finding any place to install. It says it cant be install on the harddrive and i dont have any other option to select .. what to do?
imnyaar wrote:
... It says it cant be install on the harddrive
What does the message say, exactly?
Try this:
From the Finder's Go menu, choose Computer:
Double-click your hard disk icon. It is usually named "Macintosh HD":
Look for this folder:
If it appears in that window, drag it to the Trash. -
I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.
Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904 -
Whenever I go to facetime on my macbook air it says call failed. Both my WiFi and Facetime are connected. I tried turning my Facetime on, and off,yet it still does not work. please help.
Hey Ekfree95,
Thanks for the question, and great troubleshooting so far. The following article provides additional steps that may have to resolve your issue:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
Thanks,
Matt M. -
iphoto on my used mac mini will not open my photos from my new macbook air, it says something about updating the software, but i checked and there arent any updates available... please help
Sorry for the second post..
I currently do not have an older version of iPhoto to test this on, but you might also try coping the Originals from the iPhoto Library of iPhoto 11.
To do that;
1. Right (control) click on the iPhoto Library in the Picture Folder on the MacBook Air
2. Select Show Package Content.
3. Click on the Originals Folder
4. Navigate to the disired Event or photos and copy those images to your Flash or External Drive, then copy those to the older version of iPhoto.
Beware do not move, add or delete anything in the iPhoto Library, Apple has intensionally hidden it in later versions to prevent people from messing things up. -
I cannot use Quicken on my new MacBook Air (Mac OS X Lion 10.7.2) Any suggestions? I love Quicken and it takes care of all my financial needs.
You can wait for Quicken to update (supposedly in the works) or you can switch to another application such as Quicken Essentials or another application of which there are several you will find at MacUpdate or CNET Downloads.
Otherwise you'll need to return your MBA and buy a slightly older model Mac that still runs Snow Leopard. Lion will not run any PPC-only applications such as Qucken or MS Office 2004. -
Where can I find a service for macbook air?
Where can I find a service for macbook air?
Service as in a technician?
What country are you in?
https://locate.apple.com/country -
Can't find BBC iPlayer for Macbook Air...?
Can't find BBC iPlayer for Macbook Air...? How do I download BBC iPlayer - unable to find in the App Store
BBC iPlayer
or to download something for watching later :
BBC iPlayer - Install BBC iPlayer Downloads -
My news macbook air is saying I need to make available space on my start up disk... how do I do that? What files should I delete?
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning your files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
My macbook Air diagnostics say I am connected to the net [ethernet] but I am not. Am I missing something? Thanks
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting -
is it free to take my macbook air to an apple store to get a check because the fan is always running?
Yes, the diagnosis at the apple store is free, ....have them find out what is wrong for you
However its totally normal for the fan to be always on, on your macbook Air.
SMC (System Management Controller) could be causing the fan to misinterpret temp. an SMC reset would likely fix this.
If you can HEAR the fan all the time, it might be running noisy due to dust/junk in the fan blades and hub.
If you have pets or a dusty room, fans trap dust and pet fluff like a magnet. Might just need a cleaning. -
I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?
It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.
-
I have a Macbook Air that had some coffee spilled on the keyboard and as a result the plus/equals key is no longer functioning. Can I use a program like Ukelele to re-program another key to do that function? Can I re-program a function key to do this function?
Water + electronics do not mix. Something was damaged insode, and the logic board may be corroding as is.
Take it to a Genius Bar for an evaluation and repair estimate.
This is accidental damage and not covered by warranty. -
When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!
When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.
Yes. Take the computer to the Apple store to have it fixed.
Best -
I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?
I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?
montana girl wrote:
I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5. I read that I needed to update to Snow Leopard before I can update to Maverick, ...
Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.
Maybe you are looking for
-
Keyboard went up on screen on iOS 5.0.1 and can't get it down
Well, after I updated my iPad 2 to the newest iOS 5.0.1 it was all working fine for a few hours, but than my keyboard went up on screen ( like in pic) adn can't find the reason why, or how to undo this. Tried to restore my iPad, didn't work. I think
-
Hello, i need to produce complex signal (attached as image), the signal is a logical "OR" operation of 2 pulse trains, are there any option in labview to produce such signals with PCI-6602 board? Thanx! Attachments: logical-OR.jpg 28 KB
-
Need HELP - Duplicating a DVD (movie)
Is anyone able to help me copy a movie onto my macbook so I can place it on my ipod? Please!?!?!? Message was edited by: DWSLAS
-
SQL SERVICES ARE MISSING IN CONFIGURATION MANAGER
hi We have recently migrated SQL2008 to SQL2012 enterprise edition on WINDOWS 2012,and everything is running fine. Today i have just opened SQLCONFIGURATIONMANAGER for normal services checkup,but i couldn't find any SQL services in it expect integra
-
Hello, My apologies ... I fear this is a very newbie question and I'm just missing something basic. I have created some .lvm files without headers. The contents are similar to the following: 0.000000 -107.735124 1201.923077 29750000.000000 1.