Cannot activate job BI_PROCESS_TRIGGER return code 8

Hi Experts,
When i check the cancelled job in (BI) Quality system we got this messages for a Process chain jobs in job log:
Job log for the PC:
Job started
Step 001 started (program RSPROCESS, variant XXXXXXXXXXXX, user ID ALEREMOTE)
Communication buffer deleted from previous run D7SJFXYB8BZDUE0L9ETKQSIRF
Chain ZTD_INDEX_REBUILD was removed from scheduling
Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPINDEX with ID 02002300
Program RSPROCESS successfully scheduled as job BI_PROCESS_INDEX with ID 02002300
Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHL with ID 02002400
Program RSPROCESS successfully scheduled as job BI_PROCESS_PLSWITCHP with ID 02002400
Chain ZTD_INDEX_REBUILD Was Activated And Scheduled
Cannot activate job BI_PROCESS_TRIGGER return code 8
Process did not report an instance -> no log
Job cancelled after system exception ERROR_MESSAGE
I serached with previous postings and solutions in SDN thats not matched with my case. I am getting this error at mid of the process chains ike rebiuld index ,deletion of datatarget contents , some local chain..
Suggest me...
Thanks in Advance...

Check here... Process Chains Problem

Similar Messages

Cannot activate build 9860 - Error code 0x8007232B

Cannot activate build 9860 - Error code 0x8007232B
-- SvenC

Hi
you can also look here, it is for windows 8 but it should work for windows 10.
https://support.microsoft.com/kb/929826?wa=wsignin1.0
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Process chain return code 8 error.

Hi Friends,
one of my process chain local process chain is getting failed due to the following error message,After checking the local chain inside it is fine only problem is with this local content master data showing as red,How to turn it to green.
job got cancelled due to the below error message.
Chain 0TCT_MD_C_FULL_P01 Was Activated And Scheduled
Cannot activate job BI_PROCESS_TRIGGER (return code 8)
Process did not report an instance -> no log
Job cancelled after system exception ERROR_MESSAGE
Please guide me.
Thanks,
V.Singh.

HI VRV,
Step 1: Goto Display messages on right click of your Process chain
Step 2: Goto "Chain" tab and copy "Variant" and "Instance"
Step 3: Goto SE11 and Select table RSPCPROCESSLOG
Step 4: Paste the "Variant" and "Instance" and execute it, and the value of the other fields are returned: LOG_ID, TYPE, BATCHDATE and BATCHTIME
Step 5: Goto SE38 and enter RSPC_PROCESS_FINISH
Step 6: Enter the values in the fields received from RSPCPROCESSLOG table. Additionally, make the STATE as "G‟ -> Execute
Then your Process Chain will turn to green and proceed further......
Hope this helps........
Regards,
Suman

Cannot Active Job (Return Code 4)

Hi All,
I am trying to start a process chain to create a DSO. Anytime I try and start the process chain, I get the following error:
Cannot Active Job (Return Code 4)
Return Code 4 seems to be tied to JOB_CLOSED_FAILED but I am not sure how to resolve this. Does anyone know how to resolve this issue?
Thanks

Process chains are used to load data to DSO/Cube/info objects.
Can you check your process chain start variant job was in release state? or schedule state?
if its in schedule then make it release or start immediate.
Go to start variant of your chain-->double click on it-->select change selection-->start immediate and see.

Error in transport, ended with return code: 12, job RDDEXECL cancelled

Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.

Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh

How do you carry out an event if a job finishes with a return code 4?

Hi
A job which would complete successfully in SAP via the SM36 scheduler completes with an 'Error' in Redwood CPS because there are errors within the spool and it ends with a return code 4.
We don't want this to error in Redwood CPS, so we have set the return code mapping to Completed with entries of 0 and 4.
I.e. whether or not there is an error in the spool, the job will complete successfully in Redwood CPS.
However, we want to be alerted if there are errors in the spool.
How do we do this? The manual says "A job can raise one or more events when the job gets a specific job status or return code" - where is this set? I can see on the 'Event' tab of a job definition you can raise an Event when the job enters a specific status, but I only want to raise an event (or carry out a step / send an email etc) if I get a return code 4 (none of the job statuses are relevant) - how can I do this?
Thanks
Ross

Hi Anton
Thanks for that. However, it's a bit more complicated...
I have a job chain with 2 steps. Any one of the two steps can have an error in the spool which by default in Redwood CPS result in the job ending in status Error. I don't want this, as the second step should still run if the first step ran okay with with errors in the spool (but shouldn't run at all if the 1st step fails completely). I.e. setting 'on Error goto step 2' or having no dependancy at all is not what we want.
Therefore, I set the return code mapping on Completed to return codes 0 and 4. I.e. if step 1 has an error in the spool (return code 4) it still ends as 'Completed' and step 2 runs.
Our problem is that we want to be alerted if there is a return code 4 (error in the spool). I tried as you suggested by entering on the 'Raise Event' tab of the job chain to raise an event on status 'Error' with a return code of 4. But no event was raised. I think this is because the return code mapping is setting the status to 'Completed' (on return code 0 or 4) BEFORE the software checks the status; i.e. the status is actually 'Completed' (rc=4) and not 'Error' (rc=4) so an event is not raised.
Ideally I want to set the Event to be raised on status 'Completed' with a return code 4 - but when I select 'Completed' the 'Error Code' box is greyed out.
I.e. can't set this - I can only set on a generic 'Completed' and I don't want to raise a message if the status is Completed but the return code is 0....
Any ideas??
Ross

COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4

Dear Gurus,
When I am trying to schedule a backup through DB13, I am getting an error as
"COMMIT failed in RSORAADM, object JOB, function CREATE, return code 4"
Can any body tell me what is the error about and how to resolve it.
Thanks
Best Regards
Dilip

hi Kaushal,
Thanks for your reply. Yes I could solve the issue as my Operation mode was inactive, I made it active and then could schedule the DB13 jobs.
Can you tell me what is the relationship between DB13 jobs scheduling and Operation mode. Also note when I am scheduling DB13 jobs that time none of the background job is running ie my background wp is free. It is only after I activated day/night operation mode, I could schedule the backup.
Thanks once again. Your input was of great help to me.
Best Regards
Dilip

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

DB13 return code = job error

Dear All,
WE are getting followin error while scheduling job in db13 tcode.
Function DB6_PLAN_ADD_BATCH failed with return code = Job error
ECC 6.0
Oracle 10g

You indicated that your database is Oracle 10G. This forum is for SAP on DB2 LUW as the database server. Please post your question on the appropriate forum.
Regards,
Adam Wilson
SAP Development Support
IBM Toronto Lab.

Cannot activate my viber after i update to 6.1.3 iphone 3gs..can u please help me...the the code is ok but if i activate...its being error.

cannot activate my viber after i update to 6.1.3 iphone 3gs..can u please help me...the the code is ok but if i activate...its being error.

@theViberTeam .
I'm having trouble with Viber.
A few days ago, I accidentally uninstalled it on my IPhone 4, and reinstalled it later on..
When I tried sending the activation code using the same cell phone number I had on Viber before It got uninstalled, I receive the code but when I try to put it in it keeps saying that I entered the wrong activation code, I click on the no code feature on the top right corner of Viber, it gives me a code, but when I put that code in it says the same thing ,that I have the wrong access code please try again, and so I researched on the internet and came up to this post, It said to uninstall viber and wait 24 hours to install it again, I waited 24hours and tried it again, but it STILL does the same thing. and... I even tried entering my other phone number, yet it does the same thing and shows me the same message that I entered the wrong access code....It is getting frustrating! May you please Help ME?! What can I do??

Adobe Photoshop Elements cannot activate, no code

On 8/9/14 I purchased Adobe Photoshop Elements 12 & Adobe Premiere Elements 12 from Staples. Serial number on box is
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
The store manager told me the product would be automatically activated. There is no other serial number provided on the box. I downloaded the DVD and the product will not activate without a serial number. How do I find the serial number, I cannot activate your program. My email address is
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
. My adobe account does not guide me to solve this problem.

[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
Find your serial number quickly
You MAY have a redemption code
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this c

Trying to install Elements 13 and it asks for a serial number. The instructions say the number should start with 1057 but there is no code on the disks, box or envelopes the disks came in that start with 1057. I cannot activate the software without this code and it is a Christmas gift to my wife. HELP!

I had this problem. There are actually two boxes. The outside one with the photos and stuff and glued into it is another box containing the disks. That box has the serial number. Adobe was NO help with this as if no one else ever could not find it. I had to rip open the outer box.

I deactivated my mac adobe CS5 on one computer, and now i cannot activate it on another, it says the activation code is not valid, what is the problem?

i deactivated my mac adobe CS5 on one computer, and now i cannot activate it on another, it says the activation code is not valid, what is the problem?

Please refer:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Click the Chat Now button at the end of the page and talk with a live agent who would resolve it ASAP.
Regards,
Ashutosh

OEDQ Jobs erroring - Error Code: Cannot acquire lock, already locked

Hi experts
our Real time Individual match job is erroring out with above error code. Real time Individual clean and Real time Individual Cluster are working fine. What could be the reason for this?
(log file extract:
SEVERE: 06-May-2013 14:54:39: Cannot acquire lock: already locked (Code: 207,002)
com.datanomic.director.missionmanager.exceptions.MissionExecutionException: Cannot acquire lock: already locked (Code: 207,002)
     at com.datanomic.director.missionlieutenant.plan.MissionExecutionPlan.execute(MissionExecutionPlan.java:961)
     at com.datanomic.director.missionlieutenant.executor.MissionExecutor.runMissionNow(MissionExecutor.java:205)
     at com.datanomic.director.missionmanager.manager.MissionManager$3.run(MissionManager.java:537))
second question:
we do have setup OEDQ for key generation (Our Siebel OCH is on 8.1.1.10). When we run Siebel Key Generate jobs on Contacts and Accounts, we do get records created in SIEBEL.S_DQ_ORG_KEY and SIEBEL.S_DQ_CON_KEY. Is this table where they are supposed to be generated?
third question:
Does Siebel OCH support Address matching?
more questions to come in near future
THANKING YOU IN ADVANCE!!
rgrds
m
Edited by: user3035423 on 6.5.2013 8:18

Hi Nick. thanks for your reply.
I am newbie to the OEDQ. When you say that proces is open in Director, what does it mean? How can i close it?
In order to overcome this situation i did
1. stop datanomic service on Win2003 server
2. started Job Main Initialize reference Data in EDQ-CDS - initialize Reference Data project and waited to finish
3. started Job Real- time START ALL in EDQ-CDS project
4. this is the step where some of the jobs are errorong out, as stated before
From above to mee it looks like there should not be any process open in Director.
can you please share your thoughts
thanks
rgrds
m

Cannot activate quick time pro 7. have registration code tried "tab" "enter". verfied that code entered is correct. using 10.8.3 but downloaded QT 7. Desparate for some direction. Thanks, Wally from Brooklyn.

Cannot activate QT 7 pro. Tried entering with "tab" per instructions. Verified that name and code are exactly as received download. Initially used the "enter" key. Restarted and used the "tab" key. No response ! Desparate for any help. IMac running 10.8.3. Thanks, Wally from Brooklyn

Cannot activate QT 7 pro. Tried entering with "tab" per instructions. Verified that name and code are exactly as received download. Initially used the "enter" key. Restarted and used the "tab" key. No response ! Desparate for any help. IMac running 10.8.3. Thanks, Wally from Brooklyn

Cannot activate job BI_PROCESS_TRIGGER return code 8

Similar Messages

Maybe you are looking for