Cannot ad Hyper-v host from unstruted domain

Did anyone face a problem like me? When I try to add a untrusted Hyper-V host in to SCVMM 2012 on VMM console, console suddenly disconnect to server. After I reopen up the console, find out process failed at step installing agent.
with error message like this:
1700
The Virtual Machine Manager service on the %ServerName; server stopped while this job was running. This may have been caused by a system restart.
To restart this job, navigate to the Jobs view and select the job in the results pane. Then, in the Actions pane, click Restart.
Command Line Interface: Restart the job by running the following command:\n\nPS> Restart-Job -Job (Get-VMMServer %ServerName; | Get-Job | where { $_.ID -eq "%TaskID;"})
tTry to run this job again and problem still there. gonna be crazy with this!

Might be better to post this in the SCVMM forum.  Here is one that deals with clustering -
http://social.technet.microsoft.com/Forums/en-US/home?forum=virtualmachinemgrclustering&filter=alltypes&sort=lastpostdesc
.:|:.:|:. tim

Similar Messages

  • Run commands on remote Hyper-V host in different domain/network with powershell

    Hi experts,
    My Setup: Windows Server 2012 R2 / SCVMM 2012 managing localhost and other Hyper-V hosts
    I need to run a script on the remote Hyper-V Host which is in different domain/workgroup using powershell.
    I have tried
    Invoke-SCScriptcommand cmdlet. But I am getting the below error
    Error (2917)
    Virtual Machine Manager cannot process the request because an error occurred while authenticating MY-PC-15.mydomain.local. Possible causes are:
    1) The specified user name or password are not valid.
    2) The Service Principal Name (SPN) for the remote computer name and port does not exist.
    3) The client and remote computers are in different domains and there is not a two-way full trust between the two domains.
    The network path was not found (0x80070035)
    I tried the 'Run Script Command' option in the Host tab in VMM. But getting the same error.
    Checked that it uses the 'Invoke-ScScriptcommand' PS cmdlet.
    Could someone explain how to run scripts on remote Hyper-V host in different Domain/Perimeter network ?
    Regards,
    Saleem

    Hi Saleem,
    Please try to follow the article below to regarding using command "enter-pssession" across domains :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/f60a29ef-925e-4712-9788-1f95e12c8cfc/forum-faq-introduce-windows-powershell-remoting?forum=winserverpowershell
    (I tested it in my lab )
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Can't communicate with other hosts from primary domain.

    Hi all, I add vsw0 as below:
    ldm add-vsw net-dev=e1000g0 primary-vsw0 primary
    ifconfig vsw0 plumb
    ifconfig e1000g0 down unplumb
    ifconfig vsw0 (ipaddressofserver) netmask 255.255.224.0 broadcast + up
    mv /etc/hostname.e1000g0 /etc/hostname.vsw0
    init 6
    but now I can't communicate with other hosts from primary domain,if I plumb and up e1000g0 and down vsw0 ,everything is OK,what's wrong with it?Thanks.

    This is greate!I replaced e1000g0 with vsw0 now.
    Could ldm automatic update the ldm configuration parameters?I created a file for the virtual disk,the output of ldm list-bindings as below:
    ......................ignore.............................
    Vdisk: disk0 vol0@primary-vds0
    service: primary-vds0 @ primary
    ......................ignore.................................
    but when I updated some other parameters such as vsw,vnet,the vol0 became:
    .................ignore.........................
    Vdisk: disk0 primary-vds0-vol0@primary-vds0
    service: primary-vds0
    .......................ignore........................................
    and the same time the primary-vds0-vol0 link with /dev/zvol/rdsk/domdisk/dom1,so the guest domain couldn't get the boot disk,I had to update it manunally.
    Did you have the same issue?
    Greetings fenglimian.

  • Can Hyper-V host join a domain of a virtual machine domain controller on that same host?

    Learning about Failover Clustering with Hyper-V. I have two hyper-v nodes(servers). I want to add them to a failover cluster, but it said that the nodes must be in a domain to join failover cluster.
    Can I create a domain controller role on a virtual machine hosted on that same node and join that node to the domain?
    Can I just create a role on one of the two nodes along with hyper-v role and join the second node to the domain?

    You can create
    an AD VM and join the Hyper-V host to it in Server 2012 (or Hyper-V Server 2012, the preferred OS for running a Hyper-V Cluster). This did
    not work in any previous version of Windows.
    This would be a really horrible idea for a production environment, but suitable for a lab/training.
    Also, you only need one host/node to form a cluster (though it probably throws errors/warnings if you do)

  • Cannot upload to ftp host from Muse

    Win 7, Muse v 2014.1.1.6
    I want to "upload to ftp host" from Muse so client can edit in browser. I'm using the same login info that I use with Filezilla. This message appears "Could not validate that the specified domain is associated with the FTP server and folder. Proceed anyway?" I click yes, progress bar shows files uploading but Adobe® Muse™ CC In-Browser Editing says "This Muse site was not exported using the Upload to FTP Host command. Please use the Upload to FTP Host command to publish the site, and then try again."
    When I try to add the folder web files actually reside in, (/httpdocs) Muse says "This folder does not exist. Create it?" I select NO being afraid of goofing up the site.
    Client wants to be able to update text on Lots. 
    Any suggestions?

    Correct. Putting a slash in front of the folder indicates an absolute path, so we try and create a folder named "httpdocs" in the root folder of your FTP server - not what you want in this case. Removing the slash indicates a relative path - we look for the "httpdocs" folder in the working directory (the directory you are in when you first log in, probably something like '/public_html' or '/www'), and so finds your pre-existing folder.

  • Cannot add hyper-v feature from windows feature add/remove section

    Keep getting error code 0x800F0906

    Ensure that hardware virtualization support is turned on in the BIOS settings.
    Please view this
    article.
    Carey Frisch

  • I have a domain with 2 DCs (both virtual machines) in different Hyper-V Hosts. Dose this case make any influence on the time sync?

    As title,
    I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator.
    Dose this case make any influence on the time sync?
    i.e. Both of the VMs sync with Hyper-V host, instead the other host should sync with the PDC Emulator?
    I run w32tm command and get the following result:
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:dc8.domain8.local /source
    VM IC Time Synchronization Provider
    C:\Users\Administrator.DOMAIN8>w32tm /query /computer:hpvzh05.domain8.local /source
    VM IC Time Synchronization Provider
    HPVZH05.domain8.local works as PDC server.
    How can I make DC8 sync with HPVZH05?

    Awesome!
    It looks like your PDC is successfully pulling time from an external source.  DC8 is not longer pulling from Hyper-V so that is good.
    When you set a client to pull from a source ( and in this case DC8 is pulling from NT5DS, which tells it to pull from the PDC), and it CAN'T pull from that source, it will default to Local CMOS Clock.  This is likely an easy fix.
    First, check connectivity:
    - Method one- Download Portqry and run this command: portqry -n HPVZH05 -p both -e 123 and see if the results say listening, or
    - Method two- Run this command from DC8: w32tm /stripchart /computer:HPVZH05
    If you get any kind of error using method two, it's a connectivity issue.  (Maybe you have a firewall that's blocking access?)
    The other cause of this, and probably more likely in your case, is that your PDC isn't properly advertising as a reliable time source, so DC8 isn't 'allowed' to pull from it.
    Try running this command on your PDC: w32tm /config /reliable:yes
    Then go restart time on your PDC, THEN DC8 again.  (net stop w32time & net start w32time)
    Here's an article you can reference: http://technet.microsoft.com/en-us/library/cc794937(v=WS.10).aspx
    - As always, if you find my posts to be helpful, please mark it appropriately.  Thank you :)
    Chris Ream

  • Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre

    We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
    This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
    This is what is running on our host servers:
    Host 1
    File,print & issuing CA server
    Exchange 2010
    SharePoint 2010
    Quickbooks server
    Domain controller 1
    Offline CRL CA
    Host 2
    SQL 2008
    Forefront TMG 2010
    Domain Controller 2
    Windows 7 client
    With this is mind, I have drafted a rough action plan as follows:
    Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
    Document all existing system settings
    Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
    Test all software media
    Copy all VMs onto external data storage (NAS drive)
    As part of the upgrade process we will redistribute some hard drive space i.e.
    expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
    Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
    Perform an in-place upgrade to Server 2012 R2 Datacenter
    Check EV, services etc
    Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
    Upgrade Anti-virus and other system software
    Test the system
    Are there any glaring omissions? Does anyone have any tips they can give me?

    Hi Marco,
    always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
    Depending if you have a Cluster or Standalone Servers there are different ways to do it.
    When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
    As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
    You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
    A working Backup is always your friend on such Tasks.
    When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
    Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
    And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
    Udo

  • DW CS4 "cannot make connection to host" (since upgrade to CS4 from CS3)

    Recently updated from CS3 to CS4. (I had previously upgraded to OS 10.5, and everything was fine in CS3 under 10.5.)
    Everything looked OK in CS4 (I saw files in DW, but I did not try to connect to any hosts) so I wiped CS3.
    Later I noticed that the login and password for hosts had all been erased.
    When I put them in, they stay.
    BUT every single remote host gives me:
    "cannot make connection to host"
    Logging in using a numerical IP address instead of domain name does not help.
    Logging in with an FTP client (e.g. Fetch) works, though.
    Can anyone help me with this...??
    Mac under OS 10.5.7

    Wow. This is really painful. Has anyone tried to use Adobe technical/customer support lately?!  Bloody awful.
    I am on hold on my fifth call, right now.
    Four times I phoned in and had to explain everything all over again.
    Three times a representative said they would "escalate" the issue (which apparently means "trash-heap" it), and then call me back.
    Never did I get one call back.
    Before calling in I tried for two weeks to puzzle this out on my own.
    Now work is backing up and I STILL cannot use my copy of Dreamweaver.
    WTF, Adobe??

  • Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

    Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
    VM: Windows Server 2012 R2 with installed Active Directory Domain Services
    When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

    Hello Aleksandr,
    There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
    More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
    a multihomed domain controller.
    Active Directory communication fails on multihomed domain controllers
    http://support.microsoft.com/kb/272294/
    Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
    configure a DC with registry mods:
    http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
    7 Reasons not to Make Hyper-V a Domain Controller
    http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
    Domain Controller as Hyper-V host
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
    Networking?
    I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
    the host OS ping/communicate with the DC virtual machine?
    If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
    Hyper-V Server VLAN Network Configuration
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv 
    Recommendation:
    Why not just create another VM DC?
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • How to Install Integration service from hyper-v host to a virtual machine ?

    i have around 100 Virtual Machine distributed on a cluster hyper-v cluster so i need to know how to install the upgraded version of integration service from the hyper-v host to all  virtual machines
    that has a mismatched version of the integration service using power-shell script ?

    See this article:
    PowerShell Script
    for Automated Install of Hyper-V Integration Services in a VM running on Windows Server 2012 with Hyper-V V 3.0 Role using PowerShell Remoting
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Setting Virtual Machine's guest OS IP address from Hyper-V host returns Unspecified error (0x80004005)

    Hello,
    I need to inject IP address of VM's guest OS residing on Hyper-V host with Windows Server 2012 R2, from the host itself
    Guest OS is also Windows Server 2012 R2.
    In a powershell script I use SetGuestNetworkAdapterConfiguration method (link on
    MSDN). It works when the IP and default gateway are from the same subnet, but it returns an error when IP and Default Gateway are from different subnets.
    __GENUS : 2
    __CLASS : __PARAMETERS
    __SUPERCLASS :
    __DYNASTY : __PARAMETERS
    __RELPATH :
    __PROPERTY_COUNT : 2
    __DERIVATION : {}
    __SERVER :
    __NAMESPACE :
    __PATH :
    Error : <INSTANCE CLASSNAME="Msvm_Error"><PROPERTY NAME="CIMStatusCode" TYPE="uint32"><VALUE>1</VALUE></PROPERTY><PROPERTY
    NAME="CIMStatusCodeDescription" TYPE="string"></PROPERTY><PROPERTY NAME="ErrorSource" TYPE="string"></PROPERTY><PROPERTY
    NAME="ErrorSourceFormat" TYPE="uint16"><VALUE>0</VALUE></PROPERTY><PROPERTY NAME="ErrorType"
    TYPE="uint16"><VALUE>4</VALUE></PROPERTY><PROPERTY NAME="Message" TYPE="string"><VALUE>The operation
    failed.</VALUE></PROPERTY><PROPERTY.ARRAY NAME="MessageArguments" TYPE="string"><VALUE.ARRAY></VALUE.ARRAY></PROPERTY.ARRAY><PROPERTY
    NAME="MessageID" TYPE="string"><VALUE>16010</VALUE></PROPERTY><PROPERTY NAME="OtherErrorSourceFormat" TYPE="string"></PROPERTY><PROPERTY
    NAME="OtherErrorType" TYPE="string"></PROPERTY><PROPERTY NAME="OwningEntity"
    TYPE="string"><VALUE>Microsoft-Windows-Hyper-V-VMMS</VALUE></PROPERTY><PROPERTY NAME="PerceivedSeverity"
    TYPE="uint16"><VALUE>5</VALUE></PROPERTY><PROPERTY NAME="ProbableCause" TYPE="uint16"><VALUE>0</VALUE></PROPERTY><PROPERTY
    NAME="ProbableCauseDescription" TYPE="string"></PROPERTY><PROPERTY.ARRAY NAME="RecommendedActions"
    TYPE="string"></PROPERTY.ARRAY></INSTANCE>
    ReturnValue : 0
    PSComputerName :
    If I set IP address manually from guest OS, then I receive a warning window about default gateway being in another subnet than IP address, but I can choose to continue and the IP address/default gateway got configured.
    However, in the parameters of SetGuestNetworkAdapterConfiguration there is no such an switch 
    uint32 SetGuestNetworkAdapterConfiguration(
    [in]   CIM_ComputerSystem REF ComputerSystem,
    [in]   string NetworkConfiguration[],
    [out]  CIM_ConcreteJob REF Job
    Please advise on workaround.
    Thanks,
    Andrei
    Andrei Moraru Endava

    Hi,
    Please refer to the following post to see whether you can resolve the issue.
    Network Adapter (not Legacy) does not work on Virtual Machine after installation through ISO
    http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2virtualization/thread/b1e9d24c-e298-472e-ad72-90cf079f6fbd
    By the way, did you only encounter this issue with one VM or all VMs? Please do the same test on VMs with other version of Windows such as Windows Server 2008 or Windows Server 2003.
    Best Regards,
    Vincent Hu

  • I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

    I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
    Mac OS 10.8.5
    None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
    I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

    Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works!   Although I know there maybe also some other dialog box I have never seen
    Of course I saw that menu item "Import"  and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same:  "Why would I want to export my entire website?".
    An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are  obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

  • An FTP Error occured - cannot make connection to host. No response from the server

    "An FTP Error occured - cannot make connection to host. No response from the server".
    As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

    Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
    See if the 'timeout' issue could be at play here:
    http://forums.adobe.com/message/708941#708941

  • Hyper V Hosts and Domains

    Can I have hyper V hosts connected to one domain then connect a VM to another domain.
    I have three Quad port NICs- two will be connected to my DMZ domain and then to accommodate direct access I propose connecting one to my corporate LAN. I will then create the required vswitchs and place my direct access servers on DMZ switch and
    the LAN switch for a 2 leg deployment?
    Your thoughts please?

    Sure, no problem with that. Each OS whether physical host or guest VM can join any domain they can reach.
    Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Maybe you are looking for