Cannot add additional fields to KOMG and KOMPAZ...

Hello Experts,
I wantr to add 2 fields to KOMG and KOMPAZ but when I go to SE11 and click on 'APPEND STRUCTURE', there are no
options there to add new fields. Are there are any other way?
Thank you guys and take care!

there are no options there to add new fields
What do you mean by that?
It the pop-up there is a CREATE button (at the top, a bit to the right). Button Icon like a A4-paper (standard create button).

Similar Messages

Urgency: how to add additional fields to XML and tranfer to MDMcatalog

Dear experts:
I have realized the standar process for contract to mdm. when contract is released, the MDM catalog be updated automatically.
but I still have two requirement.
1. In standar process, the product category and short description these two fields are not in XML and can not transfer to MDM.
2. I have some user-defined fields in header in contract . I hope these CUFs can be added to XML and transfer to mdm ,
please tell me how to do or give me some document in SRM. (srm 7.0 MDM-Catalog 3.0 , MDM 7.1).
thanks in advance.
Jesse.

Hi Jianxin,
http://wiki.sdn.sap.com/wiki/display/SAPMDM/OpenCatalogInterfaceinSRMMDMCatalog+2.0
Hope this helps.
Regards,
Vikas

How to add additional fields to zreport which contains standard report code

Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
     or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.

Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010       00 A1'
    %txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
                             with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

How to add additional field to the existing report

hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE       CORRECTION NOTE    AUTHOR DESCRIPTION
09.03.2001            0388404 XSC    Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud    Wrong keydate for search with
                                     Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS     Report: RHXPE_EXPIRED_QUALI
                                     doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid    OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
   pchplvar LIKE p1000-plvar NO-DISPLAY,    "plan version
   pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark.           "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
            se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
   h_events LIKE dynp_rhpp-gen_train, "with training sugg
   h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
                                USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
       EXPORTING
            fill_if_initial = 'X'
       IMPORTING
            plvar           = pchplvar
            begda           = se_begd
            endda           = se_endd
          with_key        =
          SUBSTITUTE      =
          ESSENTIAL       = only_essential
            org_unit        = pchobjid-low
      EXCEPTIONS
            OTHERS     = 0.
SE_BEGD = LOW_DATE.   "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
    pchobjid-sign   = 'I'.
    pchobjid-option = 'EQ'.
    APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
    WHEN space.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  AND RETURN.
    WHEN 'X'.
      SUBMIT rhpe_expired_quali
           WITH pchplvar = pchplvar
           WITH pchotype = pchotype
           WITH pchobjid IN pchobjid
           WITH pchbegda = se_begd
           WITH pchendda = se_endd
           WITH h_qual = h_qual
           WITH h_events = h_events
                  TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.

Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim

I Cannot Add Buddies in iChat 4 and 5 - How do I fix this ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
I Cannot Add Buddies in iChat 4 and 5
Many people are reporting that they cannot add Buddies to either iChat 4 or iChat 5.
The Symptoms are that the Buddy appears in the Buddy List and then does the "Brightening/Fading" cycle but fails to be anywhere in the list including Off Line Buddies.
To Show Off Line Buddies, highlight the Buddy list to bring to the "front".
Then go to the View Menu and Enable Show Off Line Buddies.
(there is also an Option to display these in a separate Group).
There can be many causes and I will attempt to deal with then in the order that they are most likely.
A) The Contact is already in the Address Book.
When Adding a Buddy via the use of the + Sign at the Bottom of the Buddy List (Then Add Buddy) or invoking it from the Buddies menu a drop down appears to slide down out of the Buddy List Header area
In this slide out/drop down, you get the chance to Add the Screen Name and then the First Name Last Name details of the Buddy.
iChat checks the Address Book and if the First Name, Last Name items do not match any contact in the Address Book already then the Buddy will be added to the Buddy list.
As the Address Book does not allow two contacts to have the same name they will not be added to the iChat Buddy List if the name exists already.
In iChat 3 and earlier there was an Error Message that popped up saying there was Feedbag Error
See here for More
Note: AIM Protocols call Lists "Feedbags". Contents (Buddies) are "Food" and of course Food is kept in Feedbags.
The Address Book is one Feedbag in this case and the Screen Name (only) Buddy List held on the AIM Server is the other.
The Software puts the two together for Display purposes
The Fix.
Either:
1) Add them as Screen Name only
2) Use the Arrow head at the end of the Last Name line to open the Address Book and pick the Contact.
3) Open the Address Book and Edit their Card to Add the Screen Name, then drag them from the Name column to the iChat Buddy List.
4) During any type of Chat use the item in the Buddies Menu to Add the person (it will display their Screen Name in Dark text if not in the Buddy List - Then item 2 can also be used)
B) Parental Controls
There are similar Symptoms if the Mac User Account is subject to Parental Controls.
If the Mac User Account on the computer is not an Admin account it is a Standard or Managed one
A Managed one has Parental Controls Enabled.
There is a Tab for Mail and iChat.
If it is turned on for iChat then all buddies are Blocked initially (in iChat 4 Jabber and Bonjour Buddy List cannot be used.)
Adding AIM valid Screen Names (AIM, Those with either @mac.com or @me.com endings) to the allow List Unblocks those Buddies and they will show in the Buddy List as On or Off line
The Fix.
In this case if you are the Managed account you have to get the Admin account to add the Buddy to the Buddy allowed list in Parental Controls.
Exception
There is a very large exception.
Due to the fact that the way Parental Controls blocks names until they appear in the Allow List there can be a problem if testing the same iChat Details in a Test Account.
Lets say you are the Admin User on the Mac.
You set up a second Mac User Account called Test.
In this you set up iChat with the same details (Screen name) you use in your Main Mac User Account.
You then test Parental Controls by turning it On and setting the iChat Limit option.
Then you add to the allow List one or two AIM valid names.
You check iChat and find they are the only Buddies that show up.
It works, so you return to your main Mac User Account and discover that most of your Buddies are missing.
On checking the iChat Menu > Preferences > Accounts > Security Tab you find the Allow Specific People option is Enabled and the list only includes those Buddies you set in Parental Controls.
Choosing allow All does not seem to bring back the Buddies even if you Log out of the Test Mac User Account.
The Fix Here
Is to Disable all the Parental Control Settings again (Remove names from any list) before Logging out of the Test Mac User Account.
The cause is partly to do with the Setting in iChat > Preferences > General Section that reads "When I quit iChat, Set the Status to Off Line" which is not the default - leaving a partial login for Off Line Messaging. As a consequence your Buddy List is constantly being told to block certain Screen Names.
A Variation on this is if you have Two Log-ins of your Screen Name from either different apps or computers.
Altering the Buddy List in one effects the other login. The computer or app that was logged in first take precedence.
C) Adding Buddies as the wrong type (In Buddy List - But always Off Line)
This applies more to iChat 4 than it does to iChat 5
At the Add Buddy Screen/Slide in iChat 4 you have to choose if the Buddy is an AIM, @mac. or MobileMe name in a drop down.
The software shows the @mac.com or @me.com endings in grey in the Screen Name text field and adds this for you.
This can lead to Buddies being added as the wrong type as in ralphjohnsr added as [email protected] etc.
It can also lead to people being added with 2 @ symbols in the Screen Name ([email protected]@mac.com) and iChat not always telling you this is not allowed.
In both iChat 4 and 5, as Jabber IDs/Screen Names also look like Email Addresses, we have to also consider whether AIM names have been added to a Jabber List or Jabber Names added to AIM valid Lists.
D) Plain old Typos
Here I am talking about misreading someone's Screen Name and typing that in (Such as receiving and email with a Screen Name in it and typing the letter O for 0 (zero).)
And of course, just plain typing mistakes.
The Fix for C) and D)
The Buddy in this case will be in the Buddy List but will always be Off line
Highlight the Buddy with one click.
Do a Get Info (Apple()/Command(⌘) key and I key together) and their Info card will show up.
Correct as Required.
8:25 PM Wednesday; November 24, 2010
This is the 1st version of this tip. It was submitted on November 24, 2010 by Ralph Johns (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Thanks Ralph,
Some thoughts.
To Show Off Line Buddies, highlight the Buddy list to bring to the "front".
Then go to the {color:red}Show Menu{color} and Enable Show Off Line Buddies.
(there is also an Option to display these in a separate Group).
Do you mean under the {color:green}View{color} menu where I see Show Offline Buddies? (both iChat 4.0.8 and 5.0.3)
A)… In the {color:red}slide out that appears from the top{color} of the Buddy list you get the chance to Add the Screen Name and then the First Name Last Name details of the Buddy.
I kept looking for a button for the "slide out" at the top of the Buddy list. Found out it's the dialog box that appears when you click "+" (Add a new buddy…) at the bottom of the list. Yes, I can act like a beginner too
(Slide out to me sounds like a sideways slide out, versus a Pop Up or Pop Down Dialog box).
As the Address Book does not allow two contacts to have the same name they will not be added to the iChat Buddy List {color:green}if the name already exists.{color}
The Address Book i one Feedbag in this case
The Address Book {color:green}is{color} one Feedbag in this case
B) Adding AIM valid Screen Names (AIM, Those with either @mac.com or @me.com endings) to the allow List Unblocks those Buddies and they will show in the Buddy List as On {color:red}of{color} Off line
… as On {color:green}or{color} Off line
*The Fix.
Exception*
{color:red}The{color} you add to the allow {color:red}List{color} one or two AIM valid names.
{color:green}Then{color} you add to the allow one or two AIM valid names.
C)
At the Add Buddy Screen/Slide in {color:red}ichat{color} 4
At the Add Buddy Screen/Slide in {color:green}iChat 4{color}
In both iChat 4 and 5 as Jabber IDs/Screen Names also look like Email Addresses we have to also consider
In both iChat 4 and 5 as Jabber IDs/Screen Names also look like Email Addresses{color:green}. We{color} have to also consider
Nubz

Cannot add form fields in document

Acrobat Pro version 9.1.2
Windows XP SP 3
I have a document that I cannot add form fields to. When I try I get a message that says "You cannot edit the file as a form due to its security settings.
When I go to Advanced->Security->Show Security Properties. The security method is set to No Security and everything is "Allow" under the Document Restrictions Summary.
Where is there a security issue?

Lori,
How did you identify the PDF/A option? I am just curious for my future reference. I could not find it.
==================
Rupey,
The fonts are not embedded and that may also be something to address. A lot of these issues may be related to the 3rd party product used to create the PDF.

Cannot see form fields on EBay and Ad trader sites

cannot see form fields on EBay and Ad trader sites. when asked to fill a form with item details the boxes that you have to fill in are missing. using Firefox 3.6.2. i have contacted Ad trader with the question but have got no replies.
i have to use Internet Explorer to see them. does anyone have the solution to my problem? i hate explorer so much and Firefox is so quick i use it as my main browser.
== URL of affected sites ==
http://http://www.adtrader.co.uk/

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Add additional field in Vendor master data for VAT Reg. No.?

Add additional field in Vendor master data for VAT Reg. No.?
Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
Current Settings:
Country : LFAS-LAND1
VAT registration no.: LFAS-STCEG
I need to add one additional field for text information. Is this possible?
Thanks you very much
Luis G.

If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
In SPRO, go to:
>Logistics-General
->Business Partner
-->Vendors
--->Control
>Adoption of Cusomter's Own Master Data Fields
and read the documentation provided there.
You will need to implement following BAPIs
Processing Master Data Enhancements: VENDOR_ADD_DATA
Customer Subscreens: VENDOR_ADD_DATA_CS
I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
regards,
Aabhas

How to add additional field into output table for RFIDYYWT(Generic Withholding Tax Reporting)

Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
Ice

Dear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas.

How do you add additional fields in infotypes?i want to leave blank space

how do you add additional fields in infotypes?i want to leave blank space in front of the field?

Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D

[ OIM 11gR2 PS1 ]How to add additional field on Application Instance Form ?

Hi,
In our scenario we have Disconnected applications in OIM. AI (Application Instance) form and PD editing is created by OIM.
We want to add additional field in AI form.It is visible in back end. But,its not visible in OIM admin console for admin and as well for end user.
Is there any property related to form field in AI ,where we need to make changes to make it visible ?
Instance used is OIM 11gR2 PS1
Thanks,
RPB
Edited by: RPB25 on May 29, 2013 9:46 PM

I was able to resolve this issue . we need to click on "regenerate view".

Screen exit for MM01 to add additional fields to basic data tab .

Hi All ,
We are working on the SAP version ECC 5.0 . Our requirement is to add additional fields to the general data section of the basic data1 tab for the tcode MM01 . I have gone through many previous queries in SDN but not able to figure out what exactly the process should be . All I could figure out is to start the process from appending the structure to MARA for the additional fields . Then follow the steps in the SPRO .
Define Structure of Data Screens for Each Screen Sequence
Assign Secondary Screens
Maintain Order of Main and Additional Screens
Assign Screen Sequences to User/Material Type/Transaction/In
Define How Maintenance Statuses Are Determined in Data Trans
Create Program for Customized Subscreens
I am not able to comprehend what we are trying to do in these steps .
Can anyone explain me in detail what we are trying to do in the whole process ?
Thanks ,
Varun .

Hi varun,
Create the append structure on the MARA table.
The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
1.     Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
2.             Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
2.     Make the changes stated in SAP Note.
3.     After make the changes the functional analyst will need to make some configuration changes.
4.     SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
5.     Select SSq = 21 then click on Subscreens select Basic DATA1
6.     Enter in the new screens that were built
7.     Change the row that was create putting in the program (function group program) that was created in step 2.
Thanks and regards,
Pavankumar

Can we add additional fields in work center creation using any user exit ?

Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiran

hi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran

Cannot add a new email account, and hence icloud account. When i go into Settings - Mail, accounts, calendars, the option to add a new account cannot be clicked (ghosted). I also have iCloud Settings ghosted (unclickable). Cannot change in itunes also.

Cannot add a new email account, and hence i have no way of creating an iCloud account (very frustrating). I had the same problem with iOS 4.3 but i had no email account to create as i set both up when i bought the iPhone 4. After adding a company email and a gmail account (both wok perfectly) i noticed that the option to create more email accounts had been ghosted (unclickable). This didn't worry me at the time. However, iCloud needs me to create one in here so i can access the cloud which i desperately want the ability to do. When i go into Settings -> Mail, accounts, calendars, the option to add a new account cannot be clicked (ghosted). I also have iCloud in the iPhone Settings ghosted (unclickable). I have same problem in itunes on Mac OSX. Surely restoring isn't the solution as i restored my iphone when changing from iOS 4.3 -> 5. Please help?

Go to
Settings,
General,
Restrictions, type in your Restriction Password,
Accounts, tick Allow Changes.
Press the back key a few times till you're back in Settings, you should see iCloud is now highlight able, now go to Mail Contacts and Calenders and add your email account as per norm.
Hope this helps.

Cannot add additional fields to KOMG and KOMPAZ...

Similar Messages

Maybe you are looking for