Cannot Add Approved App To A Web Page - App Does Not Show in the App Part Section.

Hi all,
  I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
 Could someone try to solve this matter?
 Thanks,
 Regards,
 Chiranthaka

First, are you sure the App contains an App Part?  Not all Apps are written to have app parts.  Second, did you add the app to the site collection from Add an App in the Site Contents page?  Apps that are added and approved from the Store
are added to the App Catalog for the Web Application.  You would normally add them to the Site Collection from there after they are approved.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

  • Approved App Does Not Show in the App Part Section.

    Hi all,
      I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
    in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
     Could someone try to solve this matter?
     Thanks,
     Regards,
     Chiranthaka

    Ok I found the solution from another thread & it is at the below!
    Cannot Add
    Approved App To A Web Page - App Does Not Show in the App Part Section.

  • HT5772 How do I delete voice memos from my phone?  It does not show on the app or in iTunes.  Thanks!

    How do I delete voice memos from my phone?  It does not show in the app or in iTunes.  Thanks

    Welcome to the Apple Community.
    Settings > Music > Show all music > Off

  • I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    Hi Marcel1no,
    Welcome to the Apple Support Communities! 
    I understand that it can be frustrating when an application downloaded from the App Store is not behaving as you would expect. In this situation, I would recommend using the attached article for information on troubleshooting apps downloaded from the App Store. 
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Joe 

  • Using Firefox 4.0 Beta 4. When I open a link in a new window, the web address does not show in the location bar. Why?

    When I open a web page link in "a new window" the link opens, but the web page information does not appear in the location bar. It is blank. If I open the link in a new tab, there is ho problem.
    Further, if a open a link from the tab without a location in a new tab on the same window and then go back to the original tab, the location bar fills with the web address.
    Have done this starting in several locations, so it not location dependent.

    That behaviour is likely top be caused by an add-on, and in your case the likely culprit is IE Tab 2, the various versions of IE Tab have caused problems with Firefox 4 beta including issues with the location bar not being updated.
    You can test to see if IE Tab 2 is causing your problem by disabling it and then seeing if the location bar in a new window shows the address. If it is not that add-on causing the problem, see [[troubleshooting extensions and themes]].
    For info, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you may want to try that one instead. The latest version is available from http://coralietab.mozdev.org/installation.html

  • AAM does not show latest CC Apps

    AAM (7.0.0.324) does not show latest CC Apps. Trying to download directly from the CC Site fails because, it opens AAM an nothing happens. Deleting OPM.db doesn't have no effect at all. So, how can I get the newest versions?
    Thanks
    j

    I'm curious too. I just spent some time chatting with an Adobe agent and was told to deactivate my software and then re-download  etc but if I was always under the impression that,  through the creative cloud,  upgrades would be automatic and painless using the application manager (one of the big advantages of the cloud in the first place) - but the cloud application page has info links to new cc products and download links to CS6 apps - weird.

  • As I can download to my device on google latitude iphone 4s since I live in Venezuela does not appear in the app store of my country. thanks

    as I can download to my device on google latitude iphone 4s since I live in Venezuela does not appear in the app store of my country. thanks

    I think the setting you're looking for is within the iWork apps; for example, Settings>Pages>Use iCloud>On.  Also be sure to set Settings>iCloud>Documents & Data to On.

  • I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    I cannot unlock my phone. When I hit the number the key is highlighted but the "dot" does not show in the passcode box. Have shut it off and restarted nothing. Held on/off and "square" key to reset but still nothing. Any ideas on how to resolve this issue

    Connect to iTunes and try to reset it from there.

  • Apps do not show in the app manager, n79

    Hello,
    I installed some themes and now my old themes do not show in the app manager, however it shows up in the themes menu... how to solve this, pls help the experts here ...
    regards

    Thanks Mylenium,
    I appreciate the response. I was confused because precisely I own the full CS6 Production Premium and Encore is there, I was unaware that it was deprecated in CC. Oh well...also I remember Adobe Story in Creative Cloud last year did show up so I was confused as to why it was not showing up now.
    So Adobe Story is only cloud based now? hmmm...not sure how I feel about that one.
    Anyway, thanks for the reply and all my best.

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • Web template "0ADHOC" does not exist in the master system error

    Hi to all,
    The Web template "0ADHOC" does not exist in the master system.
    Error coming while executing query on web template.
    Via TCODE RSCUTV27 I have checked the default web template 0ADHOC is already there for adhoc analysis.
    Please can anyone tell me what the problem is?
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Hi,
    According to the error message,
    The template ""0ADHOC" does not exist in the BI system. It has to be transported too.
    OR
    Logon to R3 and check in Transaction SE38 with program "RS_TEMPLATE_MAINTAIN_XX".
    You will see
                                         Template ID :
                                         Reusable Web Item ID :
                                         Version :
    Give "template name" and see what is the version.
    If it is "D" then please change that to version "A". and check if issue persist.
    Hope this helps.
    Regards,
    Mani

  • The software update badge does not show on the settings app on iphone 4s?? How to fix it?

    Hi ,
    I have a new iphone 4s and since i have baught , the new software update badge does not show on the settings app icon in my phone ,
    Though the new update shows in the software update menu.
    Any idea how to make the icon show the badge ???

    Software Update option is only available if you have IOS 5 or above.
    Your iPhone 3G IOS 4.2.1 is the end of line, there's no more update for this model.

  • Erorr  " The Web template "0ANALYZER" does not exist in the master system "

    Hi
    i am trying to run query from Query designer and execute in Web .i am trying to execute this in query designer. i am getting below error.
    "The Web template "0ANALYZER" does not exist in the master system "
    i activated all templates but not able to execute any report in web
    i am able to execute same report in webaplication but not thru query desinger... do i need to setup anything.?
    please do help me

    For clarification:
    If following happens:
    > you are launching the query with URL like:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=<your query name>
    > then you get the error message "The Web template "0ANALYZER" does not exist in the master system"
    --> then you should check the settings for default templates in SPRO. Please mention that the default Web Template for query execution (BEx Web Analyzer) is called 0ANALYSIS_PATTERN.
    --> also check the 0ANALYZER Web Template in SE38 / Program: RS_TEMPLATE_MAINTAIN_70 -> then check if the template is active.
    When you problem is other nature you have to describe it in detail.
    Regards, Karol

  • When I try to open a pdf billing statement it opens a blank web page and does not download the pdf or open its reader. Why not?

    I click on a link to download last months billing statement for say my phone provider. A new web page opens that is blank. The pdf file that is supposed to download and open up in Adobe or other PDF reader does not show up or open up.

    You can open with any of the following (if they are installed on your ipad) by tapping on the PDF file
    1. iBooks
    2. Adobe Reader
    3. GoodReader
    4. Quickoffice
    5. And many more

  • Applet runs fine in Eclipse, but when I load into a web page it does not.

    I created a simple applet in Eclipse, and it works fine in the Eclipse runas/applet window.
    However I copied the .class file to a web site folder with the following HTML:
    <applet code="Bouncy.class" width="640" height="480"/>
    And I get the following error in a Java error window:
    Java Plug-in 1.6.0_17
    Using JRE version 1.6.0_17-b04 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\******
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    java.lang.NullPointerException
         at sun.plugin2.applet.Plugin2Manager.findAppletJDKLevel(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.lang.NullPointerException
    Incidentally, my asp.net codes throws this error:
    System.Web.HttpException: File does not exist.
    at System.Web.StaticFileHandler.GetFileInfo(String virtualPathWithPathInfo, String physicalPath, HttpResponse response)
    at System.Web.StaticFileHandler.ProcessRequestInternal(HttpContext context)
    at System.Web.DefaultHttpHandler.BeginProcessRequest(HttpContext context, AsyncCallback callback, Object state)
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    >>
    The folder contains both the aspx (html) file and the .class file
    Thanks for any help.

    Thanks, That did not fix it.
    FYI - the applet will not run outside of Eclipse. If I try from a command line it also fails.
    running 'java Bouncy.class' results in:
    03/17/2010 05:15 PM <DIR> .
    03/17/2010 05:15 PM <DIR> ..
    03/17/2010 10:29 AM 226 .classpath
    03/17/2010 10:29 AM 386 .project
    03/17/2010 05:15 PM 482 Bouncy$1.class
    03/17/2010 05:15 PM 1,995 Bouncy.class
    03/17/2010 05:15 PM 2,240 Bouncy.java
    03/17/2010 10:31 AM 141 java.policy.applet
    6 File(s) 5,470 bytes
    2 Dir(s) 27,895,554,048 bytes free
    C:\Documents and Settings\******\workspace\AppletTest>java Bouncy.class
    Exception in thread "main" java.lang.NoClassDefFoundError: Bouncy/class
    Caused by: java.lang.ClassNotFoundException: Bouncy.class
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: Bouncy.class. Program will exit.

Maybe you are looking for