Cannot Add Essbase Server From Admin Services Consol

Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar Joshi

Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John

Similar Messages

  • Unable to connect to the Essbase server from Admin console

    Hi,
    I have installed Essbase Server 9.3, Client 9.3 and Administration Server 9.3 in my laptop.
    The Essbase server is working fine. I am able to see all the sample applications from Excel add in. (This mean client is also working fine).
    But, the problem is when i try to connect to the Essbase server, its not allowing me by producing an error:
    "Unable to connect to the Essbase server please check the user name & password"
    username: admin
    password; password.
    i tried several times...but its not working.
    Please advise me.
    FYI, The admin server service is started already.

    Hi Subrahmanyam,
    Here , there are 2 things
    1. Check, your essbase server is up and running ,and your admin service is up. Now , when you open the 'essbase admin console ' , provide user name and password as
    admin
    password
    2. After you are connected to the console i.e admin console .
    You see
    enterprise view -> essbase analytic server -> under this , you might see your host name ( i.e of your laptop).
    This host is your essbase server , and if you want to connect to it .Provide 'username' and 'password' ,which you have give after your essbase installation
    So, conclusively, here we are dealing with 2 different sets of 'username' and 'passwords'
    In step 1-> to connect to console , use 'admin' 'password'
    In step 2-> to connect ot essbase server, use the credentials wchih you had given after installation of essbase server
    Hope this clarifies you, as this is a lil confusion to many
    Sandeep Reddy Enti
    HCC
    http://analytiks.blogspot.com

  • How do I remove previous configuration of Essbase Server from Shared Services?

    Hi All,
    I'm trying to reinstall Essbase Server (on a new server; we've upgraded the Essbase Server hardware) and reload data but the current install believes I've already configured it despite removing EssbaseCluster-1 from Shared Services Application Groups.  Is there something else I have to do to get the new install of Essbase Server configured as a new Essbase instance?
    Thanks,
    Ryan

    I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
    C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
    com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
            at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
            at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
    An error occured during the operation. Detailed Message is - reg.properties notconfigured.

  • Delay in expanding Essbase server from EAS console

    All,
    Lately, we've been encountering the issue wherein when we click on any prod essbase server from prod eas console, there is an infinite delay but none when we do it from staging eas console. Any quick pointers here as to what might be wrong?
    We are on 11.1.2.1.105 and installed Planning few days back.
    Thank you!

    My java version was 1.7.0_17 and I downgraded to 1.6.0_45 and was able to expand the essbase server. Only catch is that just before I connected, services were restarted by our admin.

  • Cannot open/add essbase server in EAS console in SSL mode

    Hello Gurus,
    I have implemented SSL in EPM which terminates at the web server but it seems that there is some issue with the Essbase server.Whenever I try to add essbase server into EAS console in a secure mode it shows the following in the Message panel of EAS console
    Error: 1040142: NZERROR: nzos_Handshake failed(29024)
    Checked Essbase logs but it has the same error mentioned in it. I am not sure where to proceed from here.
    Any help will be appreciated. Thanks.

    I think I might have the answer, EAS will be using the essbase RTC which has its own wallet in <MIDDLEWARE_HOME>\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin\wallet
    Now you can either update the cwallet.sso in that directory or add a essbase.cfg file in <MIDDLEWARE_HOME>\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0\bin
    wiith the location of the wallet using the config setting
    WalletPath <enter_full_path_to_wallet>
    I also added the certificate to the cacerts in <MIDDLEWARE_HOME>\jdk160_21\jre\lib\security
    Restart services and give it a go, works for me.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Problems starting managed server from admin console WL70 portal

    I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.
              

    I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.
              

  • Basic understanding about Essbase Server and Administration Services

    Hi
    I am a newbie to the Essbase. I am trying to figure out the diference between Server and Services.I am very confused.
    Please clarify my understanding
    Essbase Server - This is a server in which Essbase stores all the data.
    Essbase Administration Services -This is a agent used to communicate to the Essbase Server from the front end ( Admin Console)
    Admin Console - This is a front end client used to connect to different Essbase Servers. It is possible to have Essbase Servers to be installed on different machines.
    Before connecting to client Admin console we should make sure Essbase SErver and Essbase Administration SErvices are up and running
    Thanks
    Arun

    hello friend
      what ever your saying about essbase server and EAS is correct.If you want more detailed explanation on this please have a look into essbase architecture check this link which gives you better insight
    http://gerardnico.com/wiki/epm/essbase/essbase_architecture
    it not necessary that Essbase server and EAS should be on the same machine.we can add differnt servers in EAS console.
    As far as your last question(Before connecting to client Admin console we should make sure Essbase SErver and Essbase Administration SErvices are up and running)
    Before logon to EAS we have to make sure that essbase server,essbase admin services and openldap are up and running
    thanks
    raj

  • Accidentally delet server from WDS mmc console

    I have problem
    I have two servers 2012 one is AD DS DNS and DHCP other is WDS and Hyper v server on the secon I accidentally delet server from WDS mmc console.
    I have account that si administrator on all servers
    When am adding server to my wds mms console a get an error The user name  or password is incorrect
    What shout I Do

    Have you added WDSAdmin user to Domain admin group,
    Try logging to WDS server with WDSAdmin ID, which is having administrative rights on domain wide (Login using Domain Admin).
    Please check below thread,
    http://www.msfn.org/board/topic/131463-wds-add-server-error/
    http://social.technet.microsoft.com/Forums/en-US/36bc1457-39a3-4f5f-b10e-73f590be2c26/wds-server-missing-cannot-add-a-server-to-windows-deployment-services?forum=winserversetup
    Regards,
    Manjunath Sullad

  • Not able to add essbase server

    Hi all,
    Our security is with shared services when iam connecting with my user and my system password its connecting but iam not able to add essbase server its throwing error login fail
    but with admin password every thing is fine
    i refreshed users in EAS but iam not able to add essbase server
    any help would be appriciated
    Thanks

    the user you were using to login to admin server might not be having access to the essbase server.
    so make sure you were using the right user to connect to essbase server who is having access to essbase server.
    like if you are using 'admin' user, check in shared services for the provision of admin user.
    Check if he is having server access to that particular essbase server
    or you can check by logging in with the same user through maxl.
    in maxl, use the following login command and see if you were able to login or not.
    login <username> <password> on <essbase server name>;
    - Krish
    Edited by: Krish on Aug 11, 2010 2:34 PM

  • Not able to add essbase server ( part of Planning installation)

    Hi experts,
    We have installed and configured the Essbase. We have started the services.
    We are not able to add essbase server to EAS console. It is showing network error ..
    When we see essbase log, we got the following error.
    "Essbase global application does not exist at Shared Services"
    If anyone faced this kind of an issue, please let me know what could be the reason.
    Thanks,
    Ganesh.

    Have you registered Essbase with shared services yet? Try re-registering essbase.

  • Unregister Essbase/EAS from Shared services

    Hi Is it possible to unregister essbase, EAS from shared services? if so can some one please guide me unregister. we are on EPM 11.1.1.3
    Thanks

    Hi,
    I've a similar issue with my customer.
    In fact we have an an application with several databases and end users have read access on one, write acces on another and finally calculation accesses (but only on few calc scripts) on the last database.
    SO, in shared security mode we can't reach all these requirements, beacause access are granted at the Essbase application level.
    Therefore, the only solution I've found to put Essbase in stand-alone mode is to drop the essbase.sec file and recreate the essbase applications thanks to EAS or maxl commands.
    For EAS I've found a topic on this forum, and the solution is to edit the olapadmin.properties file on the installation path of EAS server and to swith the value HUBProvisionEnabled=true at false.
    You have to stop and start the services to do that but it works. And when started, you can use the EAS default login.
    Edited by: Eric_M on May 2, 2011 6:02 AM

  • Unable access the server from administration services

    Hi Experts,
    Can any one please help on the following issue:
    I have installed the 9.3.1.3 Hyperion administration services on my PC and when I tried to connect to the server I am getting the following error message:
    Could not connect to administration server, client and server are different versions
    Server version is 9.3.1 and client version is 9.3.1.3.
    I tried to download the 9.3.1 administration services from www.edelivery.oracle.com but I couldn't find the 9.3.1 version.
    Are there any other sites available to download the 9.3.1 administration services.
    Also, Can we able to connect to the Linux Essbase server from Windows administration services?
    Thanks in Advance,
    Ram

    Atul:
    Are you connecting to the essbase at remorte server location?
    Looks like Essbase a the C-NOIA131 is not started or not accepting connection request?
    check wheather it is started?
    if it is started; use IP Address and connect, sometimes server name might not work if DNS at u r network is down or not Defined properly?
    I would do a Telnet from the box in which i am trying to fire the connection and connect to the port 1423 which essbase uses to see if u have any firewall issues
    This might be a problem where essbase is not started..in my experience.. let me know u r findings...
    Thanks,
    Sriram

  • How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

  • Register essbase server to shared service in Unix

    Hi All,
    How can we Register essbase server to shared service in Unix server. Can anyone please let me know the procedure or steps.
    Thanks

    Do you mean convert essbase to shared services security as you should of registered essbase with shared services when you configured essbase.
    You can convert essbase to shared services security via EAS, right click security.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Cannot add a New Essbase server into the EAS Console

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

    Hi can someone assist me...........
    I have installed Essbase on a new / additional server (that all went rather well, its not hard just pressing NEXT, NEXT, NEXT).
    I then used a essadmin account to configure, i have to say its not the same as the other essbase server (so i am wondering if this was the start of my problems)!!. I did not use the same essadmin as the password is unknown its not known and the orginal installation was not recorded. I do however know and used the admin account for the shared services.
    I then logged into EAS Console (single instance of the EAS, with a plan to add 3 new essbase servers to this console over the next couple of days.) i added the new essbase server, then externalised and all was happy with the world. SUCCESS :-)
    I closed EAS, and went back in and thats where the fun started, it then stated that it could not connect and i recieved the invalid login message in essbase. I have read some forums and followed the advise of going into Shared Services and manually removing the new essbase server registry under projects, cleared down and replaced the essbase.sec file etc etc to the originals and stop/started the services.
    So can anyone help on what my next steps should be?, I don't want to run off and re-register again via the console for shared services if i need to use the original essadmin password in my configuration. Any help will be gratefully recieved.

Maybe you are looking for