Cannot Add Invoices with more than one costing centers by SDK.

Have no available DI Interface to access cost/profit center
Cannot Add Invoices with more than one costing centers by SDK.

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

Similar Messages

Import AP Invoices with more than one Prepayment Application

Hi,
We have a requirement to import AP Invoices from the legacy system with more than one prepayment application to the invoice.
The AP_INVOICES_INTERFACE table provides only one column for Prepayment Number. Also, more than one line can not be created for the same invoice number.
Is there any solution to the above situation?
Gajendra

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Can i use my ipod with more than one computer?

i synched my ipod with one computer, hooked it up to another and it says i can't sync with more than one library? it says i have to restore it but i dont want to delete my music off of my ipod, i just want to add the music from this other library

I have two different iPods and two computers. I regularly use either iPod on either computer.
First set the preferences so itunes will not automatically sync when ipod is connected.
Then connect the ipod and set itunes to manually manage music.
Drag and drop whatever content you want to the device showing on the left.
If this was the default setup, there wouldn't be all these posts about people losing all their music when they connect their ipod.

Master with more than one Detail

Hallo,
Does anybody know how to create master with more than one detail. i.e
Employee as a master with the following details
(Dependent, Education, Contract, Job History).
thanks..
Ribhi

Ribhi,
A master detail form typically consist of a master form and a tabular form for the detail records, i.e. you can edit your detail records on the same page as your master record. Since you can only have one tabular form per page, having multiple of these detail tabular forms, won't work. However you could instead create your master-detail form with the option of creating the detail as a read-only report, which would have an edit link on each detail row, that would take you to a form to edit each detail row individually. With this model, you could just add additional reports after the initial creating of the master-detail form.
Regards,
Marc

Slider with more than one thumb

Hi,
does anybody know a slider with more than one thumb?
The JSlider-class only provides one thumb, but I need more thumbs to displace.
That why I posted the last question: I found one in the web but when I call the constructor, I get that error.
Thank you all
Katharina

Hi,
I also tried MThumbSlider, a.k.a. CMThumbSlider (C for
Cougaar?), the slider with more knobs. (keywords: slider,
knob, knobs, thumb, thumbs, more, two, three.)
I downloaded the code from the link mentioned below,
run the example and it worked just fine. When I tried
to subclass the slider to add tooltips I got an exception
from the loader:
UIDefaults.getUI() failed: no ComponentUI class for:...
The slider has its own package. Its constructor
(indirectly) calls the following utility function,
passing itself as an argument, just before calling
JSlider.updateUI. The latter then calls UIManager.getUI,
which fails with the exception mentioned above.
public static void setUIName(JComponent c) {
    String key = c.getUIClassID();
    String uiClassName = (String)UIManager.get(key);
    if (uiClassName == null) {
      String componentName   = c.getClass().getName();
      int index = componentName.lastIndexOf(".") +1;
      StringBuffer sb = new StringBuffer();
      sb.append( componentName.substring(0, index) );
      String lookAndFeelName = UIManager.getLookAndFeel().getName();
      if (lookAndFeelName.startsWith("CDE/")) {
        lookAndFeelName = lookAndFeelName.substring(4,lookAndFeelName.length());
      sb.append( lookAndFeelName );
      sb.append( key );
      UIManager.put(key, sb.toString());
}When the slider is subclassed outside of the package,
the above results, e.g., in
UIManager.put("MThumbSliderUI", "MetalMThumbSliderUI");thus the package name is lost. To correct such behaviour
I changed the substring with the package name, including
the last dot. The same goes for function createUI.
There is another thread on this subject:
http://forum.java.sun.com/thread.jsp?forum=57&thread=348245
The link were I found the code is
http://www2.gol.com/users/tame/swing/examples/JSliderExamples1.html

Service interface with more than one operation

Hi all,
is it possible to have a service interface with more than one operation?
I have found this blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0209118050DB10459657028039341762End?blog=/pub/wlg/15123
But this sentence:
ABAP proxy (inbound/ outbound) cannot be developed out of a Service Interface having Operations with different type of messages included. If an ABAP proxy is to be developed then all the messages included should be of one type i.e. either the included messages should be Message Type, External Message, IDOC or RFC Message. This behavior can be observed when a Service Interface is created and then subjected for a check
regards

Hi,
now the interface is running but I get another error in .NET.
"The header 'Diagnostic' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed. This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process. Please ensure that the configuration of the client's binding is consistent with the service's binding. "
Any ideas?
regards

Creating Pages in PeopleSoft with more than one HTML Form

Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!

Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.

Sample code with more than one ResultSet in JSP

Hi
Can anyone give me sample JSP code using crystal reports JRC with more than one ResultSets which works, since mine always seem to be giving error .
Thank you
Selvi
RCAgent5 detected an exception: Cannot modify a read-only collection.
at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)

You can access the JRC samples from SDN in the Business Objects Portal. The link to them can be found [here.|https://smpdl.sap-ag.de/~sapidp/012002523100006008982008E/crxi_r2_jrc_web_smpl.zip] There is a sample called jrc_resultset_datasource that shows how to pass a result set to a report; you can use this and modify it to allow another result set to be passed in.
As a note, if you are having issues and believe it is your code, start with the sample and take small steps when adding new functionality so that you can determine where things go wrong.

Cannot open firefox in more than one window

I cannot open Firefox in more than one window. I deleted and reinstalled the latest version but this did not help. I was able to open Firefox in multiple windows prior to installing an update of Avast. Don't think it should have an effect on Firefox.
Downloaded Seamonkey and have no problem with multiple windows.

Anyone?

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

Updating JournalEntries object with more than one currency fails

I'm using SBO 6.50 (exactly CEE version 7.60.014 SP:01 EF:08).
   I'm trying to update memo field of existing journal entries. Most of them works OK, but if I try to update entry with more than one currency, update fails with an error code -5002 and message:
   Transaction includes more than one currency [OCRN].
Code (in C++) is quite simple:
SAPbobsCOM::ICompanyPtr m_company = SAPbobsCOM::ICompanyPtr("SAPbobsCOM.Company");
SAPbobsCOM::IJournalEntriesPtr pEntry = m_company->GetBusinessObject(SAPbobsCOM::oJournalEntries);
long m_nId = 1;     // TransId field, any valid value
try
     if (pEntry->GetByKey(m_nId) != -1)
          return;
     pEntry->Memo = _bstr_t("Memo");;
     if (pEntry->Update() < S_OK)
          throw(0);
catch(...)
     long lError; BSTR bstrError;
     m_company->GetLastError(&lError, &bstrError);
What's wrong? Using multiple currencies in journal entry is correct, it is possible to add them manually so it should be possible to update such an "safe" field as Memo is.

Hi,
I have the same problem, but if you go to Administration->System Initialization ->Document Settings, select "Per Document", and in Document, choose "Journal Entry", by default, the options are clicked, or "Blocked", this is why in DI yoy get this message.
Try to unchecked and it will work.
HTH,
Ribeiro Santos

Generating excel with more than one tab

Hi,
I would like to ask if anyone of you know how to generate excel file from Oracle Reports with more than one tab? Is it possible? If yes, can you provide me some references on how to do it. Thanks in advance.

Hi,
Do this:
1. Create an Excel file, put some dummy data in 2 or more worksheets. Save as HTM. This will create one main HTM file, and some sub-files under a folder. One HTM sub-file will be created per worksheet. In addition, one XML sub-file (called filelist.xml) and some other sub-files will be created. (you have already done this)
2. Open one of the HTM sub-files in reports builder, and follow the steps shown in the Excel Demo on OTN to insert data in this file at appropriate place, and save as JSP.
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
3. You can repeat this step for all worksheets. So finally you will get one JSP file per worksheet.
5. Now open the main file in reports builder, and add the Excel contentType element at the top
     <%@ page contentType="application/vnd.ms-excel; charset=windows-1252" %>
6. In this file, search for the following tag
     <x:WorksheetSource HRef="./filename_files/sheet001.htm"/>
Note that instead of filename_files you will have your own file name
Change this tag as following:
     <x:WorksheetSource HRef="./filename_files/sheet001.jsp?userid=scott/tiger@myDb"/>
Note that in userid, you must provide your own DB connect string
7. Additionally, change ALL references to sheet001.htm in this file to sheet001.jsp
Do steps 6 and 7 for sheet002.htm, sheet003.htm, and so on (if needed).
8. Open filelist.xml (you will find this file inside the folder that contains sub-files). Here, too, change all references to JSP instead of HTM
9. Now place the main JSP file as well as the folder containing all sub-files inside your J2EE deployment folder. Run the main JSP file. This will run the associated JSP files (the worksheets).
This will do the trick.
If you are worried about placing the USERID information inside your JSP code, then you can use CGICMD.DAT file, and place the userid there.
Navneet.

Cannot Add Invoices with more than one costing centers by SDK.

Similar Messages

Maybe you are looking for