Cannot add mailbox database copy to DR site - .edb file not getting created

I have a DR site setup that I want copies of 4 of my mailbox databases. 3 of the mailbox databases copied over successfully but the last and largest one which is really not that large 69Gbs keeps failing when i Update the database copy. Seems
to not be creating the .edb file. Is there another way to get the .edb file over to the server, possibly manually copying it then doing and update database copy? I have my backups turned off on all the servers that have the mailbox role on it now
thinking that was causing some issues with the database copy? Any suggestions is appreciated, thanks.
Michael Duhon

Yes manually copy the edb file and paste them in the DR server . Then try to update with for the incremental of database copy. Verify the database is clean shutdown that you are moving to the DR site.
What error message it throws when you performing update the database copy
Exchange Queries

Similar Messages

Fail to add mailbox database copy

Hello,
When I am trying to add a mailbox database copy in DAG, I receive the following error:
error
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to notify source server 'mbx1.domain.local' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find the file.
when viewing details of the passiv, error message shows:
The database file wasn't found after log replay. The copy will be set to failed
Please help. Thanks

Hi,
Please use the Get-MailboxDatabaseCopyStatus cmdlet to check the health and status of mailbox database copy.
Please dismount and remount the active mailbox database, remove the failed passive database copy and then add it again to check the result.
Besides, please check the application log to see if there is any related events.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange Add Mailbox Database Copy fails.

I'm recovering from a server failure on my Exchange System and while I've been able to rebuild the server an integrate it into the Exchange System and the DAG. When I attempt to replicate any of the databases, it fails. It creates a directory on the new Exchange server in the right place, but the database isn't there and I get the following error:--------------------------------------------Summary: 1 item(s). 0 succeeded, 1 failed.Elapsed time: 00:00:23AM.ScottFailedError:A source-side operation failed. Error An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'FRANKLIN2.domain.com'. Hresult: 0x80070057. Error: An unexpected error occurred. Error (0x80070057).. [Database: AM.Scott, Server: FRANKLIN0C.domain.com]Failed to open a log truncation context to source server...
This topic first appeared in the Spiceworks Community

Hi Belinda,
Thanks for the response. I am holding off on using Eseutil or Isinteg for now as I may have finally found the problem.
I was reading another forum yesterday where someone else was getting many of the same errors and everyone responding was telling them the same thing, to check the database as it seemed to have some corruption. Then there was one post at the very bottom where
a guy said he had the same problems but found it was an incompatibility with Exchange 2010 and the Windows Serve Backup Command-line Tools for Server 2008. He removed the Command-line Tools and the problem was resolved. Since we do not use the Windows Serve
Backup, we use Backup Exec, I decided to give it a try. I removed the Command-line Tools and reseeded the database. It has been running since about 12:30 PM yesterday with no errors at all. I'm not claiming victory yet as I stated in my original post that
it has at times run for up to 5 days before failing. I will monitor it for the next week and keep my fingers crossed that the issue has been resolved. I will report back if it fails before then and if not I will consider the issue resolved and post to
the thread.
If this does in fact turn out to be the solution it is just another instance of Microsoft dropping the ball as I was only able to find this mentioned once on their website in a thread about Exchange logs not truncating. I would find it rather annoying their
Server backup software is incompatible with their Mail program and even more annoying that they have not acknowledged the issue. I have been fighting this for months and only found the solution by a stroke of luck. I will update accordingly.
Many thanks,
Gerard

Seed mailbox database copy through replication network (DAG members on different subnets in different sites)

Good afternoon
I currently operate a two node DAG in our primary site supporting one mailbox database. I plan to introduce a third DAG node in our datacenter which is in a different Active Directory site. Both current DAG members replicate over a dedicated replication
network to keep the traffic separate from the MAPI traffic. The third DAG member will also have a dedicated replication network adapter (of course, on a different subnet). Ideally I would like to seed the database at a time of my choosing, rather than at the
moment I add the mailbox database copy (I know how to achieve this), but I would like to specify which network the data replicates over.
According to the following (see below link) under the 'Seeding and Networks' section as my two DAG members will be on different subnets in different sites Exchange will make the decision to use the MAPI network adapters of the target and source server.
'If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.'
http://technet.microsoft.com/en-us/library/dd335158%28v=exchg.150%29.aspx
Am I able to force Exchange to use the replication network adapters of both source and target server when I initiate the seeding process? I have a 200+ GB mailbox database that will need to replicate over a 100Mbps internet connection to our secondary
site and I would like to keep that traffic to the replication network I have configured.
Any insight would be helpful.

Hi,
If you want to specify the networks for seeding, you can use the
Network parameter when running the
Update-MailboxDatabaseCopy cmdlet and specify the DAG networks that you want to use.
If you don't use the Network parameter, then the system uses the following default behavior for selecting a network to use for the seeding operation:
If the source server and target server are on the same subnet and a replication network has been configured that includes the subnet, the replication network will be used.
If the source server and target server are on different subnets, even if a replication network that contains those subnets has been configured, the client (MAPI) network will be used for seeding.
If the source server and target server are in different datacenters, the client (MAPI) network will be used for seeding.
So please use the Update-MailboxDatabaseCopy cmdlet with
NetWork parameter to specify which DAG network should be used for seeding.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Moving the mailbox database copy from one exchange server to another exchange server 2010 DAG

Hello Team
is it possible to the move the passive copy of database and logs from one server to another exchange server in the same DAG with out removing and deleting the mailbox database copies in exchange 2010
normaly procedure is
Remove the mailbox database copies and manually delete the .edb files and logs from the physical location and re-add the mailbox database copy to the new server in the DAG.
is that any way to achieve to move the passive database copy to another exchange 2010 server in the same DAG ?

From your note, you appear to have a two-member DAG (with a server hosting your active database, and a second hosting the passive copy), and you want to move your passive database copy from the current passive server to another. Your note
about what "the normal procedure is" isn't 100% correct - there are many ways to handle this task, and all can be considered "normal". Why not just add the third server to the DAG and
add a database copy on that third server? Once it is fully seeded, you can remove the current passive copy. This way, you never lose your redundancy.
Yes i can add the third and fourth serve in DAG , but i cannot add the mailbox database copies to the 3rd and 4th mailbox server in DAG as am using RTM version of exchange 2010 which is allowing to have only 5 database inclding mailbox datbase copies
and also currently my lab setup is two member dag (with a server hosting your active database,
and a second hosting the passive copy) in the same site named SITE A
and recently i have created new SITE B and included the 3rd and 4th DAG members in the same DAG
i want the mailbox database copies from the mailbox server database in SITE A to
Mailbox server database in SITE B as passive copy
That is why i want to move the mailbox database without deleting / removing it manually
Hope you understand my situation!

Remove mailbox database copy from DAG

Hi There,
We would like to remove the mailbox database copy from our exchange server as we are lack of the space on our fixed vhd and we hope to be able to free about 100GB from the passive database copies as we have deployed DAG. is there any guidelines or procedures
to safely remove the database copies? currently, we have 4 mailbox servers, HQMB01, HQMB02, SSMB01, and SSMB02. HQMB01 and HQMB02 is already part of DAG members by itself. however, on ssmb01 and ssmb02, we also add in HQMB01 and HQMB02 as the DAG member,
thus they can fail over to HQMB01 or HQMB02 if their server have issue. in this situation, SSMB01 and SSMB02 passive copies is also inside our HQMB01 and HQMB02. As the our HQMB01 and HQMB02 is lack of the disk space and we would like to remove SSMB01
and SSMB02 from the DAG, thus we could remove the passive database copies. The following is the picture of the activation preference for all servers. what is the procedures and the guidelines to remove mailbox database copy and also remove the server from
the DAG members? we are quite confuse and worry that after we are removing wrongly and cause the active database to lost as we understand that there is replication happening between them. as we have 4 mailbox servers from which server we should perform
the task? Wish to get some advises from the exchange guru from this forum. we are on exchange server 2010 sp1 and windows server 2008 R2.Thanks so much.
Name                 : HQDB01
Servers              : {HQMB01, HQMB02}
ActivationPreference : {[HQMB01, 1], [HQMB02, 2]}
ReplayLagTimes       : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
TruncationLagTimes   : {[HQMB01, 00:00:00], [HQMB02, 00:00:00]}
Name                 : HQDB02
Servers              : {HQMB02, HQMB01}
ActivationPreference : {[HQMB02, 1], [HQMB01, 2]}
ReplayLagTimes       : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
TruncationLagTimes   : {[HQMB02, 00:00:00], [HQMB01, 00:00:00]}
Name                 : SSDB01
Servers              : {SSMB01, SSMB02, HQMB01, HQMB02}
ActivationPreference : {[SSMB01, 1], [SSMB02, 2], [HQMB01, 3], [HQMB02, 4]}
ReplayLagTimes       : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
TruncationLagTimes   : {[SSMB01, 00:00:00], [SSMB02, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
Name                 : SSDB02
Servers              : {SSMB02, SSMB01, HQMB01, HQMB02}
ActivationPreference : {[SSMB02, 1], [SSMB01, 2], [HQMB01, 3], [HQMB02, 4]}
ReplayLagTimes       : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}
TruncationLagTimes   : {[SSMB02, 00:00:00], [SSMB01, 00:00:00], [HQMB01, 00:00:00], [HQMB02, 00:00:00]}

Hi Exchange Guru,
thanks so much for the prompt response..i have few queries to ask following your guidelines above:
1. from the show result above, I am still confuse which server that I should go to remove as this is involving 4 database copies. from what I understand from the truncation or replay lag times of SSDB01 and SSDB02, I can see that HQMB01 and HQMB02 are on
the third and fourth preference, which means that SSDB01 and SSDB02 will be able to failover to each of them when there is a failure and it cause the passive copies of both of SSDB01 and SSDB02 to be stored in the HQMB01 and HQMB02. what my purpose
is to remove both SSDB01 and SSDB02 passive copies in HQMB01 and HQMB02. in this case, should I login to SSDB01 or SSDB02 mailbox servers to perform the removal with your guidelines above?
2. is the command as below:
Remove-MailboxDatabaseCopy -Identity SSDB01\HQMB01 -Confirm:$False
Remove-MailboxDatabaseCopy -Identity SSDB01HQMB02 -Confirm:$False
Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB01 -Confirm:$False
Remove-MailboxDatabaseCopy -Identity SSDB02\HQMB02 -Confirm:$False
will this cause the risk either of my HQDB01, HQDB02, SSDB01, and SSDB02 active copies accidentally being removed? I am sorry that I am a bit naggy and always want a confirmation as this is very critical and I must be super careful.
3. If after the removal successful, when is the best time to go to the drive where the passive copies stored and remove them so I can clear some space on my disk? and is it just as simple by going to the drive and do a folder file deletion manually?
because I just worry when I delete the file and the server is still replicating between each other, which will cause even corruption to the active database.
4. From point 3, you mention about when the server is empty. what do you mean by that? do you mean that when the passive copies are no more there? and what command that I used to check?
5. From point 4, is removing the server from DAG the last step to be performed? yes, I want to remove them from DAG, thus will left only HQMB01 and HQMB02 as one DAG and SSMB01 and SSMB02 as one DAG.
Thank so so much for your patient and attention.
Regards,
Henry

Failed to Manually Seed the Mailbox Database Copy on Exchange 2013

Hi,
I tried to manually seed the mailbox database copy via exchange shell by run this command
Update-MailboxDatabaseCopy –Identity “DB_name\Server” -sourceserver "Name Server" –DeleteExistingFiles.
However, i got the error message whereas shown below.
A parameter cannot be found that matches parameter name 'identity'.
    + CategoryInfo          : InvalidArgument: (:) [Update-MailboxDatabaseCopy], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,Update-MailboxDatabaseCopy
    + PSComputerName        : XXXX.abc.XXX
Any ideas?

I hope database is in suspended state and not in failed state.
Make sure EMS is running As Administrator.
http://technet.microsoft.com/en-us/library/dd335201(v=exchg.150).aspx
Cheers,
Gulab Prasad,
Technology Consultant
Blog:
www.exchangeranger.com
Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

I connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone.

i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?

First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier.

Mailbox Database Copy Status Failed

We have 2 Exchange 2010 servers. We run a DAG. Recently I have noticed that database copy DB2 which is located on Exch-1 is showing "Failed". Database copy DB1 which is located on Exch-2 is showing Healthy. I searched online
for information regarding the issue with the failed database copy. I found information that led me to run these commands.
Suspend-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name”
Update-MailboxDatabaseCopy -Identity “Mailbox Database XXXXX\Server Name” -DeleteExistingFiles
It went thru the seeding process and completed but the database copy still shows "Failed". Copy Q Length is 19. I have refreshed the console. What else do I need to do to correct this? I did recently shut down Exch-2 server
for maintenance. thanks

Hi,
It's glade to hear the good news. Thanks for your updating.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Microsoft Exchange Server/Exchange 2010/Mailbox/Database Copy Mounted

Good Morning everyone!!!
I Have SCOM 2007 R2 CU5 Envoirnment and i am monitoring Microsoft Exchange 2010 SP1 Messaging infrastracture,
I have Microsoft Exchange 2010 SP1 Monitoring MP, MP version is 14.2.71.0.
Case:-
When exchange is having issue with DAG, SCOM monitoring rule:- KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
is generating the alert but alert Description is only " _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_ " and rest of the things are blank
and because of this ticketing team is unable to process these alerts,
Impact:-
Whenever DAG is unavailable, messaging team is not getting notification and because of this. Exchange services are failing down,
Does anyone having this kind of issues on their exchange environment?
I am looking solution for this issue, please let me know if anyone is aware about this.
Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Does anyone has updated information regarding Exchange 2010 DAG monitoring fix, <o:p></o:p>
As i see there was exchange MP release on 31st Aug 2012
ID
Name
Targets
_ef4a8515_1cc0_48a9_aa12_92ba059a6eae_
KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
Root Management Server
_EF51D339_22C5_49b3_8B6B_25002BE31D4A_
KHI: Retry Mailbox Delivery Queue Length - sustained for 90 minutes - Red(>1) - Hub Transport.
Root Management Server
_93558cf0_e063_45b1_b57a_0d4b53e0d615_
KHI: The Microsoft Exchange Information Store service (MSExchangeIS) isn't running.
Root Management Server
My monitoring is affected for these rules which i mentioned below, here alerts
information is shown as rule ID instead of Rule name. and we don’t get alert description
for above rules when the generate alerts.<o:p></o:p>
Response would be appreciated <o:p></o:p>
Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

Help please. Cannot mount mailbox database error : hr=0x80004005, ec=-583

Running Server 2008 R2 fully patched with Exchange 2010 SP1 Rollup Package 6
When attempting to mount mailbox database, I receive the following error:
Microsoft Exchange Error
Failed to mount database 'Mailbox Database 2034345905'.
Mailbox Database 2034345905
Failed
Error:
Couldn't mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount
database. (hr=0x80004005, ec=-583)
. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com].
An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]
An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Server: www.myservername.com]
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
OK
Application Log entry shows the following:
Log Name:      Application
Source:        MSExchange Management Application
Date:          11/6/2011 10:41:35 PM
Event ID:      5000
Task Category: AdminAuditLog
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      www.myservername.com
Description:
Failed to save admin audit log for this cmdlet invocation.
Organization:
Log content:
Subject: myservername.com/Users/Administrator : Mount-Database
Body:
Cmdlet Name: Mount-Database
Object Modified: Mailbox Database 2034345905
Parameter: Identity = Mailbox Database 2034345905
Caller: myservername.com/Users/Administrator
Succeeded: False
Error: System.InvalidOperationException: Couldn\'t mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message:
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]. ---> Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperException: An Active Manager operation failed.
Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed.
Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n\r\n
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)\r\n   at Microsoft.Mapi.ExRpcAdmin.MountDatabase(Guid guidStorageGroup, Guid guidMdb, Int32 ulFlags)\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid, MountFlags flags)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()\r\n
at Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode opCode, Action operation)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid mdbGuid, MountFlags storeFlags,
AmMountFlags amMountFlags, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n   --- End of inner exception stack trace (Microsoft.Mapi.MapiExceptionCallFailed) ---\r\n   --- End of stack trace on server (www.myservername.com) ---\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String serverToRpc, Guid dbGuid, AmMountArg mountArg)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs )\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler ev)\r\n   --- End of inner exception stack trace (Microsoft.Exchange.Data.Storage.AmOperationFailedException) ---\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, DatabaseMountDialOverride
mountDialOverride, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n   --- End of stack trace on server (WWW.myservername.com) ---\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String
serverName, RpcErrorExceptionInfo errorInfo)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, Database database, String targetServer, InternalRpcOperation rpcOperation)\r\n
at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags storeMountFlags)\r\n   at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()\r\n   --- End of inner
exception stack trace ---
Run Date: 2011-11-07T03:41:32
OriginatingServer: WWW (14.01.0355.001)
Error:
Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=myservername/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=WWW/cn=Microsoft System Attendant. ---> Microsoft.Mapi.MapiExceptionNetworkError:
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: WWW.myservername.com
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=177]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x0][length=82][latency=31]
    Lid: 25964   StoreEc: 0x824
    Lid: 38951   EMSMDB.EcDoDisconnect called [length=8]
    Lid: 55335   EMSMDB.EcDoDisconnect returned [ec=0x0][length=12][latency=0]
    Lid: 36081
    Lid: 52465   StoreEc: 0x80040115
    Lid: 60065
    Lid: 33777   StoreEc: 0x80040115
    Lid: 59805
    Lid: 52209   StoreEc: 0x80040115
    Lid: 56583
    Lid: 52487   StoreEc: 0x80040115
    Lid: 19778
    Lid: 27970   StoreEc: 0x80040115
    Lid: 17730
    Lid: 25922   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity,
String applicationId)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
   at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity)
   at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass12.<CreateMailboxSession>b__10(MailboxSession mailboxSession)
   at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType, ExchangePrincipal owner, CultureInfo cultureInfo, String clientInfoString, IAccountingObject budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure
initializeMailboxSessionFailure)
   at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IAccountingObject budget)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags
initFlags, IList`1 foldersToInit, IAccountingObject budget)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data, LogMessageDelegate logMessage)
   at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Management Application" />
    <EventID Qualifiers="49152">5000</EventID>
    <Level>2</Level>
    <Task>5</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-11-07T03:41:35.000000000Z" />
    <EventRecordID>90607</EventRecordID>
    <Channel>Application</Channel>
    <Computer>www.myservername.com</Computer>
    <Security />
</System>
<EventData>
    <Data>Subject: myservername.com/Users/Administrator : Mount-Database
Body:
Cmdlet Name: Mount-Database
Object Modified: Mailbox Database 2034345905
Parameter: Identity = Mailbox Database 2034345905
Caller: myservername.com/Users/Administrator
Succeeded: False
Error: System.InvalidOperationException: Couldn\'t mount the database that you specified. Specified database: Mailbox Database 2034345905; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message:
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. [Database: Mailbox Database 2034345905, Server: WWW.myservername.com]. ---> Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperException: An Active Manager operation failed.
Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Exchange.Data.Storage.AmOperationFailedException: An Active Manager operation failed.
Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n. ---> Microsoft.Mapi.MapiExceptionCallFailed: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)\n\r\n
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)\r\n   at Microsoft.Mapi.ExRpcAdmin.MountDatabase(Guid guidStorageGroup, Guid guidMdb, Int32 ulFlags)\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid, MountFlags flags)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()\r\n
at Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode opCode, Action operation)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid mdbGuid, MountFlags storeFlags,
AmMountFlags amMountFlags, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n   --- End of inner exception stack trace (Microsoft.Mapi.MapiExceptionCallFailed) ---\r\n   --- End of stack trace on server (www.myservername.com) ---\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String serverToRpc, Guid dbGuid, AmMountArg mountArg)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs )\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler ev)\r\n   --- End of inner exception stack trace (Microsoft.Exchange.Data.Storage.AmOperationFailedException) ---\r\n
at Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan timeout)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, DatabaseMountDialOverride
mountDialOverride, AmDbActionCode actionCode)\r\n   at Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation)\r\n   --- End of stack trace on server (WWW.myservername.com) ---\r\n   at Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String databaseName, String
serverName, RpcErrorExceptionInfo errorInfo)\r\n   at Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint rpcOperationHint, Database database, String targetServer, InternalRpcOperation rpcOperation)\r\n
at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags storeMountFlags)\r\n   at Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()\r\n   --- End of inner
exception stack trace ---
Run Date: 2011-11-07T03:41:32
OriginatingServer: WWW (14.01.0355.001)
</Data>
    <Data>
    </Data>
    <Data>Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException: Cannot open mailbox /o=myservername/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=WWW/cn=Microsoft System Attendant. --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: WWW.myservername.com
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -545057711
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 45169   StoreEc: 0x824
    Lid: 44273
    Lid: 59431   EMSMDB.EcDoConnectEx called [length=177]
    Lid: 34855   EMSMDB.EcDoConnectEx returned [ec=0x0][length=82][latency=31]
    Lid: 25964   StoreEc: 0x824
    Lid: 38951   EMSMDB.EcDoDisconnect called [length=8]
    Lid: 55335   EMSMDB.EcDoDisconnect returned [ec=0x0][length=12][latency=0]
    Lid: 36081
    Lid: 52465   StoreEc: 0x80040115
    Lid: 60065
    Lid: 33777   StoreEc: 0x80040115
    Lid: 59805
    Lid: 52209   StoreEc: 0x80040115
    Lid: 56583
    Lid: 52487   StoreEc: 0x80040115
    Lid: 19778
    Lid: 27970   StoreEc: 0x80040115
    Lid: 17730
    Lid: 25922   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
   at Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache, ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user, String domain, String password, String httpProxyServerName,
Int32 ulConMod, Int32 lcidString, Int32 lcidSort, Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize, Client xropClient, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
   at Microsoft.Mapi.MapiStore.OpenMapiStore(String serverDn, String userDn, String mailboxDn, Guid guidMailbox, Guid guidMdb, String userName, String domainName, String password, String httpProxyServerName, ConnectFlag connectFlags, OpenStoreFlag
storeFlags, CultureInfo cultureInfo, Boolean wantRedirect, String& correctServerDN, ClientIdentityInfo clientIdentity, String applicationId, Client xropClient, Boolean wantWebServices, Byte[] clientSessionInfo, TimeSpan connectionTimeout)
   at Microsoft.Mapi.MapiStore.OpenMailbox(String serverDn, String userDn, String mailboxDn, String userName, String domainName, String password, ConnectFlag connectFlags, OpenStoreFlag storeFlags, CultureInfo cultureInfo, WindowsIdentity windowsIdentity,
String applicationId)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Storage.MailboxSession.ForceOpen(MapiStore linkedStore)
   at Microsoft.Exchange.Data.Storage.MailboxSession.Initialize(MapiStore linkedStore, LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, GenericIdentity auxiliaryIdentity)
   at Microsoft.Exchange.Data.Storage.MailboxSession.<>c__DisplayClass12.<CreateMailboxSession>b__10(MailboxSession mailboxSession)
   at Microsoft.Exchange.Data.Storage.MailboxSession.InternalCreateMailboxSession(LogonType logonType, ExchangePrincipal owner, CultureInfo cultureInfo, String clientInfoString, IAccountingObject budget, Action`1 initializeMailboxSession, InitializeMailboxSessionFailure
initializeMailboxSessionFailure)
   at Microsoft.Exchange.Data.Storage.MailboxSession.CreateMailboxSession(LogonType logonType, ExchangePrincipal owner, DelegateLogonUser delegateUser, Object identity, OpenMailboxSessionFlags flags, CultureInfo cultureInfo, String clientInfoString,
PropertyDefinition[] mailboxProperties, IList`1 foldersToInit, GenericIdentity auxiliaryIdentity, IAccountingObject budget)
   at Microsoft.Exchange.Data.Storage.MailboxSession.ConfigurableOpen(ExchangePrincipal mailbox, MailboxAccessInfo accessInfo, CultureInfo cultureInfo, String clientInfoString, LogonType logonType, PropertyDefinition[] mailboxProperties, InitializationFlags
initFlags, IList`1 foldersToInit, IAccountingObject budget)
   at Microsoft.Exchange.Data.Storage.MailboxSession.OpenAsSystemService(ExchangePrincipal mailboxOwner, CultureInfo cultureInfo, String clientInfoString)
   at Microsoft.Exchange.ProvisioningAgent.MailboxLoggerFactory.XsoMailer.Log(AdminLogMessageData data, LogMessageDelegate logMessage)
   at Microsoft.Exchange.ProvisioningAgent.AdminLogProvisioningHandler.OnComplete(Boolean succeeded, Exception e)</Data>
</EventData>
</Event>

We just ran into this exact problem this morning. At 7:26am the database just dismounted. No errors just dismount. Now they won't mount and we can't run eseutil /p or /d as it immediately errors out. /k works and no errors found.
Bandaid fix was to go into the EMS and simply move the public and private db to a nas. Now they mount fine. This is strictly a temp solution to get the server back online but something was changed in host machine drive setup (hyperv with compellent san)
According to the host service (county systems) nothing was done or changed and no updates.
At any rate it is now working and we just need to know what can be done to migrate back to the san and off the nas.
Here is the error when trying to mount - the key is the -583 as none of the other errors comply with is special instance
Failed to mount database 'Mailbox Database 2017935857'.
Mailbox Database 2017935857
Failed
Error:
Couldn't mount the database that you specified. Specified database: Mailbox Database 2017935857; Error code: An Active Manager operation failed. Error: An error occurred during discovery of the database availability group topology. Error: The database action
failed. Error: [Active Manager] An exception occurred: Operation failed with message: MapiExceptionCallFailed:
Unable to mount database. (hr=0x80004005, ec=-583)
.. [Database: Mailbox Database 2017935857, Server: xxx.xxx.local].
An Active Manager operation failed. Error: An error occurred during discovery of the database availability group topology. Error: The database action failed. Error: [Active Manager] An exception occurred: Operation failed with message: MapiExceptionCallFailed:
Unable to mount database. (hr=0x80004005, ec=-583)
.. [Database: Mailbox Database 2017935857, Server: xxx.xxx.local]
An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
. [Server: xxx.xxx.local]
MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-583)
virtualfailsafe

DBA studio: Error add/connect database "Failed to parse tnsnames.ora file"

I have Oracle (version 8.1.7) installed in my XP machine and when I try to (having chosen "Launch DBA Studio standalone") to open a connection I get:
"Failed to parse tnsnames.ora file
ERROR: 100 -- NLNV-NLNV String Format Error".
Also got this when I tried to manually add a database to a tree.
I can access the databases listed in my tnsnames.ora using SQL Plus with no error.
This is my tnsnames.ora.
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora81\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = buch3ora)
(PRESENTATION = http://admin)
EXTPROC_CONNECTION_DATA.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MyOra3.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = MyMachine3)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ora3)
OORCL.xx.yy.GE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 3.4.55.66)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = oorcl))
Does anybody have any idea what is wrong? Thanks a lot. Changsong

Just found out this IS a string error in my Tnsname.ora. What i did is deleting all the entries in my tnsname.ora, and start adding each one back. I found one particular entry is responsible for the error. This is the old text
serv32.xxx.ge.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = TCP)(PROTOCOL = TCP)(HOST = sevr32.xxy.ge.com)(PORT = 1521))
(CONNECT_DATA = (SID = atmo32))
just looking by itself I can't see anything wrong. I just formatted it a little, making it looked like the other one that is working
serv32.xxx.ge.com =(DESCRIPTION =
     (ADDRESS_LIST =
     (ADDRESS =
     (COMMUNITY = TCP)
     (PROTOCOL = TCP)
     (HOST = sevr32.xxy.ge.com)
     (PORT = 1521)))
     (CONNECT_DATA=
     (SID = atmo32)))
and now it works fine. I Really can't tell the difference, except that some words were moved to the other line. What puzzled me is that the same old tnsname.ora worked in almost all the other circumstances, like sql plus, and other database enginee. But it is just not good enough for dba studio?
I admit I probably should have used the network utility to add a connection to avoid this type of format error.
Anyhow, I'm glad it is solved. by the way, the symjct.dll mentioned in the previous post should be symcjit.dll. I guess he mispelled the name. I renamed it to symcjit_old.dll and now the java error was gone. So that is another gain from this post. Thanks Joel for all the information.

Files not getting picked from the FTP site

Dear All,
We are having one File-XI-RFC scenario running in XI-PRD Server. Sometimes what happens is that files available in the FTP site are not getting picked by the File adapter. I have checked in the adapter monitoring and communication channel is active there. Also, there are no errors regarding this in SXMB_MONI. I have configured alerts also but for this case no alerts are getting trigerred. And also when I am reactivating that particular communication channel then that file is getting picked instantaneously.
Can anybody please guide me on what might be the real cause for this as this error is happening randomly.
regards,
N.Jain.

HI,
Have you used per File transfer parameter in FTP Communication channel.
It makes the FTP adapter inactive in ideal time.
So add the poll interval may be for every 30 mins or something like it. It will forcefully activate the FTP port after every 30 mins. You may have the poll interval for every 1 min. Only the files to be picked up are getting logged in in XI monitoring.
So there will be no garbage collection of unwanted messages in Monitoring.
Thanks
Swarup

BUG?? UTF-8 non-Latin database chars in IR csv export file not export right

Hello,
i have this issue: my database character set is UTF-8 (AL32UTF8) and contains data in a table used in IR that are Greek (non-Latin). While i can see them displayed correctly in IR and also via select / in Object Browser in SQL Workshop when i try to Download as csv the produced csv does not have the Greek characters exported correctly, while the Latin ones are ok.
This problem is the same if i try IE or Firefox. Also the export in HTML works successfully and i see the Greek characters there correctly!
Is there any issue with UTF-8 and non-Latin characters in export to csv from IRs ? Can someone confirm this, or has a similar export problem with UTF-8 DB and non-Latin characters ?
How could i solve this issue ?
TIA

Hello Joel,
thanks for taking the time to answer to my Issue. Well this does not work for my case as the source of data (Database character set) is UTF-8. The Data inside the database that are shown in the IR on the Screen is UTF-8 and this is done correctly. You can see this in my example. The actual Data in the Database are from multiple languages, English, Greek, German, Bulgarian etc that's why i selected the UTF-8 character set when implementing the Database and this requirement was for all character data. Also the suggested character set from Oracle is Unicode when you create a Database and you have to support data from multiple languages.
What is the requirement, is that what i see in the IR (i mean in Display) i need to export in CSV file correctly and this is what i expect from the Download as CSV feature to achieve. I understand that you had in mind Excel when implementing this feature but a CSV is just an easy way to export the Data - a Comma Separated Values file, not necessarily to open them directly in Excel. Also i want to add here that in Excel you can import the Data in UTF-8 encoding when importing from CSV, which is fine for my customer. Also Excel 2008 and later understands a UTF-8 CSV file if you have placed the UTF-8 BOM character at the start of the file (well, it drops you to the wizzard, but it's almost the same as importing).
Since the feature you describe and if i understood correctly is creating always an ANSI encoded file in every case, even when the Database character set is UTF-8, it is impossible to export correctly if i have data that are neither in Latin, not in the other 128 country specific characters i choose in Globalization attributes and these data is that i see in Display and need to export to CSV. I believe that this feature in case the Database character set is UTF-8 should create a CSV file that is UTF-8 encoded and export correctly what i see i the screen and i suspect that others would also expect this behaviour. Or at least you can allow/implement(?) this behaviour when Automatic CSV encoding is set to No. But i stongly believe - and especially from the eyes of a user - to have different things in screen and in the depicted CSV file is a bug, not a feature.
I would like to have comments on this from other people here too.
Dionyssis

Site not getting created in SharePoint 2013.

Hi,
I am trying to create site in 2013. while creating site, it is taking long time and after some time tried refresh the page, it shows site created. But when i click on created site, it shows empty page. i am not getting errors or event logs. what will be
the error. Could some one please help me in creating site with working fine.
Thanks,
Badri.
Badri

Hi,
According to your post, my understanding is that you get a blank page when you create a new site.
To narrow down the issue scope, I recommend that you can try to test the following things.
1. What’s the type of this site you created in this site collectionCreate a new different types site in this site collections to check if this issue is occurred on the only site collection in this web application.
    Create a new site collection in another web application to check if this issue is occurred on the only web application.
    Create a new web application, create a new site collection in this new web application to test if it works.
    If you are then the odds are that something went wrong during the provisioning of the original web application.
    And, you can add your URL for this site to “trusted sites” in IE.
http://sharepoint.stackexchange.com/questions/60957/external-access-gives-a-blank-home-page
2. Do you use the administrator account to login the site?
    You can use the administrator account to login the site, then check the permission of your account.
    Maybe your account has no permission to access the site, you can assign it Full Control permission, then check whether it works.
http://stackoverflow.com/questions/4742175/new-site-collection-is-empty-sharepoint-2010
3. Go to the IIS and select the respective web application. Here, I have selected the web application to which the site collection belongs to.
    Double click the Authentication icon.
    Set the status of ‘Basic Authentication’ from “Disabled” to “Enabled”.
http://adicodes.com/fix-error-empty-pages-when-new-site-collection-is-created/
http://sensoft2000-sharepoint.blogspot.com/2010/06/getting-blank-page-instead-of-central.html
4. Control Panel > Programs and Features > Turn Windows features on or off >Internet Information Services > World Wide Web Services > Security >tick ‘Windows Authentication’, do an IISReset for good measure.
    To be more specific, check the authentication settings for SharePoint Central Administration website in IIS. Make sure that you have Windows Authentication enabled and Anonymous Authentication disabled.
http://blog.vinewave.com/2012/01/04/solved-sharepoint-returning-a-blank-page/
http://blogs.objectsharp.com/post/2010/01/04/Blank-page-instead-of-the-SharePoint-Central-Administration-site.aspx
5. Run the following power shell command to disable the LoopbackCheck.
New-ItemProperty HKLM:\System\CurrentControlSet\Control\Lsa -Name "DisableLoopbackCheck" -value "1" -PropertyType dword
    You may have to restart the servers and will have run this from all of your SharePoint servers.
    You can also navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa in registry and create the dword32 for DisableLoopbackCheck, modify the value to 1.
https://social.technet.microsoft.com/Forums/en-US/7d311288-e14d-4fa8-be02-da524cb4c0ea/sharepoint-site-returns-a-blank-page?forum=sharepointadmin
If the issue persists, please check the ULS log file to find more information about this issue.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best Regards,
Yumi Fu

Cannot add mailbox database copy to DR site - .edb file not getting created

Similar Messages

Maybe you are looking for