Cannot add new shared calendar

When I attempt to add a new shared calendar (Preferences->select my associated account->Delegation) by hitting the plus sign, a new line appears, and I introduce the name of the shared calendar. But then, no matter what I do, the text disappears when I try to click the "Show" checkbox, and after that if I click outside, the whole line disappears. What is going on? How can I add the shared calendar?
Grey Wolf

I just tried this and found that after the keyboard disappears, if I touch the box to name the new calendar (where it says Untitled Calendar), the keyboard will reappear and stay put. Does that fix it for you?

Similar Messages

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Iphone 4s calendar events disappeared and I cannot add new events

I have an iphone 4s with ios 7. Suddenly all events I added on my calendar disappeared and I cannot add new events. The plus sign+ is there but it is light grey and will not activate. I do not sync it with any other calendar

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Cannot add users to Calendar Server

Cannot add users to Calendar Server

You may get the following error when you try to add users to a new
installation of Calendar Server 3.0:

Could not bind as [nsCalXItemId=10000:00001, o=Ace Industry,c=US]. 
Create ObjectClass for user [cn=John Doe, o=Ace Industry, c=US]... failed.

This is an inconsistent problem that we are trying to duplicate on a
regular basis. There are a few solutions:

1) Create another node. This seems to work every time. 
2) Deinstall the Calendar Server completely and reinstall. Be VERY
careful of the Directory Server URL definition.

What printer model is it? I ask, because often manufacturers provide USB-only drivers for USB-only printers - for Macs, that is. In other words, if you know about CUPS from using Macs and linux, the manufacturers actually provide drivers with the comm protocol built-in, rather than make use of the USB "backend" available from CUPS. These are called "monolithic" drivers - they don't follow the unix/linux/CUPS concept of making use of already-provided modules.

Cannot deselect a shared calendar. When I untick, it reappears about 2 seconds later.

Cannot deselect a shared calendar. When I untick, it reappears about 2 seconds later.

I have this problem too. Leaving and sharing again doesn't fix it, and neither does creating a new shared calendar. The problem persists. Hopefully this will be fixed soon

Cannot add new items to a value list in AW database

I have a database which I have been using for many years. One of the fields is a value list. I just went to add another item to the list, and no matter what I do, the Create button is grayed out. I have another value list in the same database that works fine.
There are currently 170 items in the value list that is causin the problem, but I didn't think that there was a limit to the number of items that can be is a value list. (At least there is nothing in the AW technical specifications to indicate thin. I duplicated the existing database, deleted about 20 items from the list, then saved the file, and reopened it, and still cannot add new items to that value list. Does anyone know what might be causing the problem?

Oops
I read too fast.
Here is a short script which may help.
Replace the pop-up item by a text one and edit the property myList in my script to fit your needs.
Select the field to fill and run the script.
Then choose an item in the displaid list. It will be pasted in the selected field.
This trick would give you to work with a "no limit" list of items.
-- [SCRIPT DB fillFieldFromAlist ]
Assuming that
the front document is a database one
and that a text field is selected,
run the script to select an item in a list
and paste it in the field.
Yvan KOENIG, Vallauris (FRANCE)
le 19 mars 2007
property MyList : {"item 1", ¬
"item 2", ¬
"item 3", ¬
"item 4", ¬
"item 5", ¬
"item 6", ¬
"item 7", ¬
"item 8", ¬
(* edit the list to fit your needs *)
tell application "AppleWorks 6"
activate
tell document 1
set laClasse to (get class of selection)
if laClasse is not field then return (* the selection is not a field *)
set myItem to choose from list MyList
if myItem is false then return
set the clipboard to myItem's item 1
select menu item 7 of menu 3 (*
Tout sélectionner •• Select All *)
paste
end tell -- document 1
end tell -- AppleWorks
-- [/SCRIPT]
Yvan KOENIG (from FRANCE lundi 19 mars 2007 16:44:53)

Cannot Add New Form Fields

I'm troubleshooting a problem with an existing pdf document in our office. Though I install Acrobat I do not use it on a daily- hence my asking for assistance. The computer is an Optiplex 745 running WIN XP Pro SP 2 with all updates.
The doc is a 42 page human resources document that has both scanned and original (made in Word/Acrobat) pages. Though I can edit existing fields/boxes, I cannot add new ones. I can select "add fields", click and drag seeing the crosshairs and field/box area, but when I let go, nothing happens. No new field and no erorr messages.
I've checked the security- it's wide open (no security) and layers- it has none or only one. The user who reported the problem is using Acrobat 5.x, I've tested it in 5.x, and 9 (standard and pro) on my computer with no success. I've included screenshots of the doc info below in hopes that they might provide some clues as to the problem.
Thank you for any assistance that you may provide.

After discovering that the other primary user had a local copy of this form- I tried that in Acrobat 9 and it was editable. So it appears that it was the form itself.
I'm resaving the local document to the network drive (where the problem doc came from) and updating both primary users to Acrobat 9. One was using 5 the other 7. Hopefully that will prevent any further problems.
Thanks for your assistance.

Cannot Add new line using BI IP query

Hi All,
We have created a planning application (BI IP Query) and used it in VC 7.1 model using BI Query Wizard service. Now we are able to customize existing rows ( existing rows are using flat file upload)... we can able to change the existing record values and save it.
But we are not able to add new line... its going to dump... We are able to add new line using WAD with same query but not in VC 7.1
This issue is same as below 2 threads...
Re: How to create new records through a VC form in an input-ready query??
Re: Cannot add new records through VC form when consuming IP write back query?
Thanks,
PradeeP

Its working now... SAP has given the fix (patch) for this issue when we deployed it, everything is working fine... I think they will release this fix (patch)soon...
Raise an Sap OSS message for solution

Cannot add new selectors or edit existing CSS file with my Mac

I have just subscibed to Dreamweaver CC and I cannot add new selectors or edit the exisiting "main" css that comes with the tutorial. When asked to add selector a box appears but when I press enter/return twice it disappears. Also there is no option to edit existing properties. for example, to change a font color I pick color but there is no enter or "OK" option. I'm very puzzled and stuck.

The trial version of Dreamweaver is fully functional. The only limitation is that it stops working after 30 days. If you're having problems with getting the software to work correctly, it might be a good idea to try posting a question in the Downloading, Installing, Setting Up forum, mentioning the fact that you've already posted here (otherwise, they might just transfer you back to this or one of the other Dreamweaver forums).
If you can't make changes to files, it might have something to do with permissions or the user account that you've logged onto the computer with.
When asking for help in the other forum, mention your operating system, and which version you're using. The problem might be related to your computer setup.

Cannot add new contact or edit existing one

Cannot add new contact or edit existing one. TH GSM, curve 8900, OS v5.0.01067, file free none ,battery pull didn't fix the problem, applications Google maps 3.0.2, whatsapp 2.6.2177. Device even freezes when trying to add or edit . Thanks

I am having the exact same problem!! I hope we get an answer.

My ipad2 cannot add events to calendars? There isn't a symbol "plus", and it doesn't response no matter how to tip it.

My ipad2 cannot add events to calendars? There isn't a symbol "plus", and it doesn't response no matter how to tip it.

This may sound a little stupid, have you tried turning on iCloud and test your calendar again.

TS3999 Calendar - cannot add new event

After last iOS update I can no longer add new events to my calendar. I also cannot turn on my location services.

Welcome to the Apple Community.
Do you have restrictions turned on.
(Settings > general > Restrictions)

Users cannot edit a shared calendar of a shared mailbox that was deleted from the cloud and recreated on premise

Description:
The following example account [email protected] is an on premise AD account being used as a shared mailbox in the cloud. We have discovered that regardless of what we do, not a single user can edit the calendar entries.
The following message is shown in Outlook Click to Run 2013 when an entry. "New appointment" button is also greyed out, including "Calendar Permissions" and some others.
This problem started when the shared mailbox was created wrongly by creating it in the cloud first and we had to delete it and start over. The "in the cloud" user was deleted and the same user was created in AD on-premise with the same account name
and then Dir Synced with the cloud. A license was assigned, a user mailbox on exchange online created and the type was converted to a shared mailbox and Editor rights were defined on the calendar folder for specific users.
Actions performed:
Action01: gave users Editor rights on calendar folder through powershell
Result01: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
Action02: Opened calendar with Outlook and tried to edit entries
Result02: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action03: Opened calendar with OWA of users
Result03: Users can edit the shared calendar on OWA
Action04: Gave users Full Access permission on mailbox with automapping on
Result04: Users can edit calendar in Outlook
Action05: Gave users Full Access permission on mailbox with automapping off (mailbox no longer visible in outlook)
Result05: Users cannot edit calendar in Outlook
Action06: Removed Full Access permission on mailbox for users
Result06: User cannot edit calendar in Outlook
Action07: Removed [email protected] from on-premise AD, performed dirsync, removed account from ms online using remove-msoluser -removefromrecyclebin
Result07: No trace of the account was anywhere to be found.
Action08: Created new [email protected] account on on-premise AD, assigned o365 license to user including exchange online license
Result08: New empty Exchange online mailbox was created
Action09: gave users Editor rights on calendar folder through powershell
Result09: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
(Note: whenever mailboxfolder permissions are modified for this mailbox it's as if they are ran THREE times in a row, the first time they are applied and the powershell gives immediately 3 exceptions behind this:
An existing permission entry was found for user: [email protected]
    + CategoryInfo          : NotSpecified: (:) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
    + FullyQualifiedErrorId : [Server=DBXPR05MB046,RequestId=3b3e080e-9aaf-4db9-9b90-b7171d59eba2,TimeStamp=7/11/2014
   8:15:39] [FailureCategory=Cmdlet-UserAlreadyExistsInPermissionEntryException] 57078FCD,Microsoft.Exchange.Manageme
nt.StoreTasks.AddMailboxFolderPermission
    + PSComputerName        : outlook.office365.com
Any other mailbox does not do this when setting mailboxfolder permissions)
Action10: Opened calendar with Outlook and tried to edit entries
Result10: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
Action11: Tried on a fresh new pc with first time logon
Result11: did not help
Additional information:
We have seen this problem with another user which was recreated, when he shares his calendar with others and people get the calendar invite email and click "Open Calendar" they receive a popup "The folder cannot be found".
My first impression points to a corruption/bug in the GAL on exchange online, since we're using o365 for midsize bussinesses we cannot use the AdressList role to expose the adresslist cmdlts for deeper troubleshooting.
PS:
Issue tested on different computers and with different user accounts, not a single user can edit the calendar of [email protected] when editor rights are given.
Noticed when editing rights for the shared mailbox in powershell after the first confirmation line
Office 2013 is click to run was updated to latest version, version number: 15.0.4659.1001

Greetings Gil,
I haven't heard of that one.
Questions:
Does the calendar in question show up in the "Subscriptions" category of iCal?
If you remove all accounts from iCal > Preferences > Accounts and quit and re-open iCal, does the calendar in question vanish? If so, does the calendar come back when you re-input the servers you need into iCal > Preferences > Accounts?
Can you provide a screen shot of your calendar sidebar.
While you answer those questions, some troubleshooting to try:
Try dragging one of your other calendars above this calendar that won't delete and then quit / re-open iCal and attempt to delete the calendar in question.
Failing that:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
4. Launch iCal and test.
If the issue persists at this point:
Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Hope that helps!

ICal 3.0.6: all events gone, cannot add new events either, needs force quit

Hello,
I am experiencing the same behaviour seen by others on the list. It probably occured due to the OSX upgrade to 10.5.6. I hadn't used iCal much since Dec 10 or so and only noticed the anomalous behaviour yesterday.
What I see:
- iCal comes up but all previous events are no longer in it
- The default Home and Work calendars are also gone
- The left bottom section of iCal shows January 2001 and the forward/back buttons do not work in the this subwindow
- I cannot add any new events
- I can only close iCal by using force quit
My events and calendars files are still available in the ~\Library\Calendars folder but I cannot import them into iCal. File->Import->Import an iCal file does not work (a finder like window does not appear to allow me to choose a file).
I have tried the following:
- moving com.apple.iCal.plist to the desktop and login/logout
- moving Calendar Cache to the desktop and login/logout
- login using another account and tried to use iCal. no go.
I haven't tried to install an older version of iCal from the OSX DVD yet.
Any ideas?

I am having the same behavior. In the past with many major OSX upgrades this has happened and I had to get a previous copy from Time Machine. Right now my Time Machine copy is dead and I can't do it. I tried getting an older copy of iCal but it is exhibiting the same behavior!! I can't synch the calendar with my iPhone, either! No, I do not want to reinstall Leopard from scratch on this machine just to replace iCal - that is ABSURD!! This is the 3rd or 4th time this has happened. I don't have 4 - 6 hours of my time to fix this kind of problem every couple of months - not to mention several spare hard drives, etc.
What is causing this problem, and how can we get iCal back??
How about a simple iCal reinstall utility page on the Apple Web site if this is going to keep happening??

Cannot Add new fields to standard QM datasource

Hi
I got this erro when I try to add new fields from LBWE.
Field ZZRFKIMG cannot be selected because of unit field VRKME -> see long text
Message no. MCEX032
Diagnosis
Field ZZRFKIMG cannot be transferred, since its unit field VRKME is either not in the communication structure, or was purposefully excluded from the selection.
Procedure
If you have chosen your own field, you must also create a user-defined unit field in the append and use it accordingly.
How can I resolve it.
thanks

Hi,
My Understanding is that if the field is available in the Pool in LBWE then no need to enhance the datasource.
In my case the field is available in LBWE though it is ZFIELD (ZZRFKLMG and ZZNETPRC).
In RSA6 I added the this unit
ZZMEINS     MEINS     UNIT                                                                           Base Unit of Measure
ZZWAERK     WAERK     CUKY                                                                           SD Document Currency
I went back to LBWE and try to add the following Zfieds (ZZRFKLMG and ZZNETPRC) and the error is same.
Now I try to add the the field directly in the append structure * ZZMC05Q02ITM* but its asking to maintain the ref table and ref field.
I added ZZMC05Q02ITM as ref table and ZZRFKLMG as ref unit and I still get errors.
I am are that if I maintain it in RSA6 then I need to write user exit in CMOD but since it is available in LBWE I want to get it from the pool.
I have tried this and there was no errors during activation
ZZRFKLMG     ZZRQE_RFKLMG     QUAN     QMFE     ZZMEINS     Notification quantity in base units
I gave the table name and Unit.
Despite adding it, I still get data even though I did not used LBWE pool.
thanks alot SUV123
Edited by: Bhat Vaidya on Oct 14, 2009 10:44 AM
Edited by: Bhat Vaidya on Oct 14, 2009 11:06 AM

Cannot add new shared calendar

Similar Messages

Maybe you are looking for