Cannot add smilies and other functionalities when posting[SOLVED]

Hello, I'm with a strange problem... I don't know if this is with my browser or with the forums...I cannot put smilies,tags, etc. during my posts...Is someone having the same problem? Plz help...
Thanks alot.  As you can see no smilies...^^
Last edited by kaola_linux (2008-12-18 08:06:25)

You need to put them in manually: http://bbs.archlinux.org/help.php#smilies
A toolbar was there when we were using phpbb for the forum software.

Similar Messages

  • Firefox keeps wanting to start in Safe Mode and it says I can make some changes permanent such as "Disable all add-ons" and others. When I select one of the options I can then "Make Changes and Restart".

    When I make my selection it can then proceed to use Firefox. However the next time I open Firefox I get the same problem.
    I'm using Windows 7. I have used Firefox for many years with Windows XP and never had this problem. Is there a solution?

    See [[Firefox is stuck in Safe Mode]]
    "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
    Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
    See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

  • Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now e

    Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.

    Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
    Neill

  • I have CS5 design premium student and teacher edition, have never been able to receive any updates. And cannot find cetain features like Content Aware, Adobe Watermarks etc...Is there any way I can add these and other features

    I have never been able to receive any updates. And cannot find cetain features like Content Aware, Adobe Watermarks etc...Is there any way I can add these and other features unavailable to me? Or do I have to upgrade the version I have? If so, how much would that be?

    The only "content aware" feature in CS5 is the fill, so you are not missing anything with the updates because nothing more is there. And I honestly don't know what you mean by "Adobe watermarks" there is no such thing, but there is a series of scripts for such stuff.
    Mylenium

  • Cannot add column to flexible table when ddl autocommit is off using Procedure

    Hello All,
    Through procedure I am trying to insert data into the target(EX_92) table(with schema flexibility)
    Source table data
    ID
    PRODUCT_CODE
    PRODUCT_NAME
    PRICE
    COLOR
    TYPE
    1
    1
    rugg
    101.22
    2
    1
    rugg
    101.22
    3
    2
    book
    200.32
    BLUE
    Y
    Target table QUERY
    drop table EX_P2;
    CREATE COLUMN TABLE EX_P2(
    ID INTEGER PRIMARY KEY,
    PRODUCT_CODE VARCHAR(3),
    PRODUCT_NAME NVARCHAR(20),
    PRICE DECIMAL(5,2)
    ) WITH SCHEMA FLEXIBILITY;
    Procedure to insert above records with additional columns into the target table(EX_P2)
    Procedure
    drop procedure "DS_O1"."PROC";
    create procedure "DS_O1"."PROC"(IN max_value INTEGER, IN schema_name varchar(40), IN table_name varchar(40), IN column_list varchar(400))
    LANGUAGE SQLSCRIPT  AS
    BEGIN
    DECLARE maxid integer :=0;
    DECLARE INSERT_STR VARCHAR(1000) :='';
    select max(ID) into maxid from "DS_O1"."EX_P2";
    select :maxid from dummy;
    INSERT_STR :='insert into "' || 'DS_O1' ||'"."EX_P2" ('||:column_list||') (select ' ||:column_list||'
      FROM "'||:schema_name||'"."'||:table_name||'"' || ' where  ID  >' || :max_value  || ')';
    EXECUTE immediate(:INSERT_STR);
    END;
    Now while executing above procedure
    CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE');
    I am getting the following error
    Could not execute 'CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE')' in 23 ms 564 µs .
    SAP DBTech JDBC: [7]: feature not supported:  [7] "DS_O1"."PROC": line 18 col 1 (at pos 779): [7] (range 3): feature not supported: cannot add column to flexible table when ddl autocommit is off

    Hi Rajnish,
    I had the same issue. For what it’s worth I was able to do a workaround basically creating all the columns when I create the table. The following code works for me to create the table which is just a matrix with one Integer column as the key and the rest as type Double.
    It is not ideal in all scenarios because the table columns cannot be added dynamically via a procedure at a later point. This table has 27K columns now
    Of course one of the advantages of a flex table would be programmatically adding columns dynamically. This works, but maybe there is still a way to add columns dynamically from a procedure, and someone else can advise.
    Apparently dynamically adding columns via procedures may have some "minor" limitations due to the need to compile the procedure with knowledge of the flex table DDL. But again, hopefully someone knows another solution.
    Best regards,
    Mark
    DROP PROCEDURE CREATE_MATRIX;
    CREATE PROCEDURE CREATE_MATRIX(
        LANGUAGE SQLSCRIPT
        SQL SECURITY INVOKER
        AS
    /*********BEGIN PROCEDURE SCRIPT ************/
    BEGIN
        -- cursor over messages
        declare cursor matrix_cursor for
            select distinct TERM
            from TERMS
            order by term;
           declare cnt INTEGER := 0;
           declare temptxt NVARCHAR(500000) := 'CREATE COLUMN TABLE DOC_MATRIX ( CONTENT_ID INTEGER ';
        for cur_matrix as matrix_cursor do
          cnt:=:cnt + 1;
               select temptxt || ', C' || cnt || ' DOUBLE' into temptxt from dummy;
        end for;
          temptxt:=temptxt || ' ) WITH SCHEMA FLEXIBILITY';
           EXEC :temptxt;
           select :temptxt from dummy;
    END;
    DROP TABLE DOC_MATRIX;
    CALL CREATE_MATRIX();

  • I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    Notes:
    1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
    2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
    3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

  • HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

    put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • Cannot add artwork and tags to movies in itunes

    I am importing m4v movies into intunes from handbrake and have done this for over 100 movies successfully. Now though when I add artwork and other tags to the movies in itunes they don't get saved and there are no errors, i just don't see the artwork in itunes.
    I have been using atomic parsley (i am on vista) to get around this but some of my recent movies are longer (between 3 and 3.5 gigs) and atomic parsley is saying it is too long to process.
    Does anyone know how i can get itunes to work for this again? And if not, any other alternatives to tag these?
    any help is appreciated.
    peter

    In the case of a movie, for instance, select the movie title then right-click and select get info.
    At the bottom, in the Genre box there may or may not be something listed there.  Select the drop down and search for a suitable genre.  If none found and you want to add then select none or custom so that the box becomes empty.  Now simply type in your own genre.  It will be added to the list.

  • Removing address and other functionalities from a window

    Hi,
    I want to remove the address bar and other functionalities from the browser of an external window called from webdynpro. Could you tell me how to do this.
    Regards,
    Jayant.

    Hi,
       Something like this:
    //Do this before opening the window.
    IWDWindow win = wdComponentAPI.getWindowManager().
    createNonModalExternalWindow("url","title");
    win.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
    //Check out the WDWindowFeature class for more features.
    Regards,
    Satyajit.

  • Cannot add music and  video

    My Iphone is updated to I tunes, but when I click and drag my music and videos to my iphone I get a circle with a line through it and I cannot add any music or video to my phone?

    is manually manage music check
    also try adding music and videos by standard sync'ing

  • Cannot Add user to CMC Group when they are a member of LDAP group

    On PreProduction Server CMC
    Softerra LDAP browser used to verify user is a member of LDAP group
    User does not show as a member of that group in the CMC
    Cannot add user to LDAP group showing in CMC, the same group shows the member in LDAP browser
    On Production Server CMC
    For kicks I logged into the CMC on Production and I found the user is correctly showing as a member of the Group
    Why doesn't the groups in CMC show what is actually showing in the LDAP browser?

    Hi,
    Check if you have also mapped in both servers the same groups. It might be that there are some groups missing in the Pre-prod.
    Also, try restarting the CMS. I have seen similar issues that are solved after forcing the recreation of the graph.
    If after the restart you still can't see the groups, check the mapping on the LDAP server. It might be that both servers do not use the same attribute mappings.
    Regards,
    Julian

  • How to add drums and other software instruments

    i recorded a pretty sweet jazz track with my guitar and thought that it would be even sweeter if it had some awesome drums with the brushes, but cannot figure out how to apply software instruments, for like the background, to me already recorded guitar track.

    Hi bluesman...
    I thought I'd reply to this before you end up ditching this forum due to either lack of replies and possibly the odd post that just says "read the manual" with a bit of the requisite lampooning that can go with it.
    Your post strongly suggests you are very new to Logic, and audio recording/sequencing software generally. There is no harm in indicating this in your post as it will help others to pitch their solutions to you.
    Your question is of a very basic and general nature and is covered in depth in the user manual which can be found under the help menu.
    You will find other users slow to answer this question for you given that it is covered in depth in the manual - users on the forum aren't inclined generally to offer online tutorials - its a bit like asking someone to rewrite the manual for you...
    What we are very glad to do is offer specific advice about a particular problem... this means - let us know what you are trying to do to solve the problem already... saying "I can't use software instruments" doesn't help us to help you. Have you read the manual? What do you already understand?
    I realise terminology etc. can be difficult for a newcomer - my advice given the limited info you have provided - look at the manual if you haven't already; buy a Logic tutorial book or DVD (search the forum for good reccomendations); and avoid the use of the word "awesome" in your posts!
    I wish you the best of luck in your endeavours.

  • Lost Garageband and other apps when hardrive was replaced. How can I get them back?

    I lost a few mac apps when I had to have my harddrive replaced..........since it went out and it was under a factory recall. And when they replaced it they couldn't get everything off the hard-drive. So is there a way I can get the apps back.

    There are several ways to get those iLife and other App's from your original Disc Set.
    1. May or may not be an option, but at least get an estimate to replace your Optical SuperDrive from the local Apple Store or AASP.
    > Apple - Find Locations
    2. Buy a Mac compatible External DVD Drive.
    > LG 24x External DVD Drive GE24LU20
    > OWC Drive Solutions
    > LaCie
    3. Disk Sharing.
    > DVD or CD sharing: Using Remote Disc

  • Configuring PerformancePoint Service and other BI when you're on an O365 Sharepoint site

    Sharepoint online is great. Easy to use. relatively stable. But I cannot find any protocol, in absence of having access to Central Administration (how I wish I did), to configure PPS and other elements I need to begin leveraging reporting and dashboards.
    Does anyone know how I do this? Do I have to hand feed the steps to some CIM Sharepoint Tier engineer to execute for me? Or is there another way.

    O365 does not support the traditional BI features (PerformancePoint, Excel Services with connected data sources, PowerPivot to external data sources, etc). The reasons for this are numerous (no connections back to data centers, use of claim tokens, use of
    shared webapps and therefore shared app pool accounts, etc).
    For several reasons, this is why MS is pushing "PowerBI", which is a separate half-answer to the whole hosted BI issue. But this is NOT the same as PPS/etc.
    If you want BI, you need on-prem (or hybrid, where the BI components are on-prem).
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • My apple 5th gen ipod is connected to wifi but still cannot access safari and other websites..can some1 help me out?

    my apple 5th gen ipod is connected to wifi but still cannot access safari,itunes and other websites. the ip address is not strtng wid 169 and i have reset the network settings also..can some one help me out

    The 169 IP address mans it did not correctly negotiate with the router:
    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for