Cannot add wireless printer - can't get past "Add Printer"

Months ago I set up my Photosmart C4700 printer with my home wifi and MacBook Pro according to the HP instructions. All saw each other fine, the computer recognized the printer. But printing was terrible. Long hangs, half sheets, jobs queued for hours then later spat out in the middle of the night. All this has been reported elsewhere.
This morning I uninstalled all the HP software, upgraded to OSX 10.6.7 using Software Update and attempted to re-add the printer without using any of the HP code. Given the printer itself was previously set up to be on my wireless LAN, I attempted to add the printer from the MacBook over wifi without relying on the USB cable.
The add printer dialogue lists the Photosmart C4700 as a "Bonjour" printer (good). But when I select it and click "Add", I *very* briefly see a dropdown dialog entitled "Determining Discoverable Options" which disappears in less than half a second. I'm left back at the Add Printer screen. I can repeat this over and over with exactly the same result.
Any input on how to proceed would be most appreciated!

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

Similar Messages

Can't get ipad to print from cannon MG 4250 printer, Can't get ipad to print from cannon MG 4250 printer

Can't get ipad tp print from my cannon MG4250 printer need help please?

here is canons guide
http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG4250.aspx?faqtcmuri=tcm:13-957992&page=1&typ e=faq

I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?

I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?

I had the same problem and found a bunch of others did, too. Unfortunately all the posts had no responses! Anyway, I previously had my payment method linked to my paypal. I tried changing it to my credit card and it worked. Don't know if there's a bug with using paypal but that seemed to be the culprit for me. Good luck!

Bought print central app have an impact Lexmark s300 series wireless printer can't get it to work with my I pad , help

I bought the print central app have a Lexmark s300 wireless printer can't get it to work with my I pad any suggestions

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

HT4061 just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password and cannot activate without it. How can I get past this?

Just deactivated my iPhone 4s and replaced with 5s. The phone was wiped. I would like to activate it just to use it as an iPod. However I do not remember my iCloud username and password (from several years ago) and cannot activate without it. How can I get past this?

Forgot iCloud username: http://iforgot.apple.com/appleid
Forgot iCloud password: http://iforgot.apple.com

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Trying to set up Fam Sharing but can't get past the prompt telling me to add a payment method. I already have a payment in my iTunes account and wish to use it for FS. How do I do this?

Trying to set up Fam Sharing but can't get past the prompt telling me to add a payment method. I already have a payment in my iTunes account and wish to use it for FS. How do I do this?

Hi printspat,
From what I gather, you have a payment method selected for your iTunes Store account which isn’t being accepted when setting up Family Sharing.
Take a look at the he article linked below provides, which provides a lot of great information about Family Sharing, and make sure you're trying to use a valid payment method for setting up Family Sharing.
Set up Family Sharing - Apple Support
One adult in the family—the family organizer—can set up Family Sharing for the group from their iOS device or Mac. When you set up Family Sharing, you'll be asked to confirm that you agree to pay for purchases initiated by the family members you invite and that you have a valid payment method on file. Valid payment methods for setting up Family Sharing include credit cards and debit cards.*
Cheers,
-Jason

My wireless mouse and KB are in discovery mode, but I can't get past the "enter password" screen because my Mouse and KB will not work...batteries have been changed.

My Wireless KB and mouse are stuck in discovery mode, but I can't get past the "user password" screen because It won't allow me to enter characters.

Should work if you enter the code and hit the return key. Here is a step by step article.
http://support.apple.com/kb/HT1809?viewlocale=en_US
Captfred

I can't get past the wireless password,is that the same password as your iTunes?

I can't get past the wireless password?Is this the same password you use for iTunes?

Welcome to the Apple Community.
No, it will be a password created by whoever set up or installed your network.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.

Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.

HT4623 I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen. I entered emails as well as opted out. I have gone back, but Apple ID Security insists I add security questions and mail. HELP!

I "updated" my iPhone4S 16gig this morning and can't get past the "Rescue Email" screen. I entered emails as well as opted out. I have gone back, but Apple ID Security insists I add security questions and mail. HELP!

Claudius,either you didn't read my post, or you jumped to conclusions. I had a skype account that was created using a microsoft account (NOT THE ACCOUNT I AM USING NOW). PURE MICROSOFT ACCOUNT NO OTHER ACCOUNT LINKING.I had to change the primary mail of that account.I was told "no can do" by skype support.I found that if I went to account settings and clicked on the link on the line below the one that said "MICROSOFT etc" (labeled something along the lines of "TV or Device") I got the opportunity to set the password of the "live:username" account (WHICH YOU COINCIDENTALLY HAVE TO DO IF YOU WANT TO USE SMART TVs ETC).Once that was done, I COULD SUCCESSFULLY DO WHAT SKYPE SUPPORT SAID WAS IMPOSSIBLE- I could change the primary mail address. once that was done, and NOT BEFORE, I linked the account to a facebook account as well, just to be sure I have more than one way to access the skype account. What caused you to get the impression that I was writing something else? furthermore this sentence - "The solution you described in your initial message isn't actually once since all the time you were operating on different account that weren't actually linked" does not make sense, I think you mis-edited it.and I need to point out that you are incorrect. I WAS NOT OPERATING ON DIFFERENT ACCOUNTS I WAS OPERATING ON ONE SKYPE ACCOUNT, THAT WAS CREATED USING A MICROSOFT ACCOUNT just like you say you recommend. I still don't know how you can misread my initial entry like that. If you have a better solution to my initial problem - changing the primary mail of a skype account created throuth either a microsoft account or a facebook account, Please write a sticky to explain how to do it, and please inform skype support that Yes it can be done, and this is the way it is done. So far my "lucky shot" seems to be the only way to do it.

Got a new wireless keyboard that is not paired - can't get past login screen// any solutions?

The keyboard that arrived paired with my iMac was having connection issues so I swapped it this past weekend for a new one.
When I turned on my computer, I realized that I couldn't type anything because the new keyboard is not paired with my iMac.
Because of this, I can't get past my login screen! Any solutions? Thanks!

Use a USB keyboard until you can get new keyboard connected. It can be any old USB keyboard, one from a PC is fine. If you can borrow one that would be fine.

Can not get ipad to print, my ipad mini prints perfectly on same printer

Can not get ipad2 to print, printed the first time set the printer but will not print now. Mini ipad prints just fine on the HP printer. Ipad recognizes printer but will not print to it.

Hello mariamac80,
It sounds like you cannot print from your network printer on your MacBook. Printer issues can be a but tough to nail down, but I would recommend trying the troubleshooting in this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Can't get past Darwin console

I just installed some Quicktime add-ons, and I restarted my Mac. It goes to a Darwin console, I can log in to the console, if I exit, it takes me back onto the startup user menu, and if I select my user account, I'm right back into Darwin, being prompted to login.
I've never used Darwin. How can I get past this console and onto my graphic interface/desktop?

Andy
The first thing to do is to look at your logs, to see the cause of being unable to start up. But rather than point you at some other threads, let's do it from scratch here. You may want to print this post out, preferably in a largish mono-spaced font.
Since you are able to log in at the prompt, this simplifies things. After logging in, let's look at the system log—type carefully, spaces and punctuation are important:
tail -20 /var/log/system.logThis command combination looks at the last 20 lines of your log which should be enough.
Look especially for messages saying something like "login authorization failed", "exiting to console" or something similar. Copy the lines above that and post them here. If you don't see this specific message, post some of the lines at the end of the log.
We'll take it from there when I see your output.

I can't get past the grey apple screen using mavericks

I can't get past the grey apple screen trying to boot up with Mavericks. I had been using Mavericks for about a month (only had issues of freezing occasionally). I read in one of the posts here that I should try holding command R down when booting. I did now I just get a grey screen without the apple. Any advise?
I have a Mac Mini

Hello ther cnickers,
It sounds like the initial install of Mavericks went ok, and you have been using it for a while, but now cannot boot to your desktop and are stuck at a gray screen with an Apple logo. I would recommend a couple of things here:
First, try performing a Safe Boot to see if that will load up for you. If so then leave Safe Boot and restart from the Apple menu to try and get to your deskop:
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
From: Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If that works fine, I would next also verify and repair your disk if needed.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Cannot add wireless printer - can't get past "Add Printer"

Similar Messages

Maybe you are looking for