CANNOT ADJUST AUDIO VOLUME IN BEATS AUDIO

I am no longer able to adjust the volume level in my HP PaVILION DV7 NOTEBOOK. I also get a crackling noise from my speakers.

I have the same problem on my 2011 Macbook Pro.
I've been using my computer with my lid closed and on external speakers and monitor and bluetooth devices for days on end and I haven't found a solution.
Has anyone out there found a solution yet?
This was the only place I found so far with the same exact issue I have.
I've had some virus trauma in my life, so my mind naturally goes to "VIRUS!" after any little strange thing happens. I'm pretty much imploding at the moment, so, if you guys have anything, let me know.

Similar Messages

I have an iMac running snow leopard. I have trouble with my internal speakers, I cannot adjust the volume without having an earphone plugged into the jack.

The volume only works when I have earphones plugged into the jack, otherwise when I try to adjust the volume it has a circle with a cross. Ive tried restarting it with and without the headphones plugged in. However it does make that mac sound when turning on the machine before the apple logo comes on and takes me to the desktop screen. Is there anything I can do to fix this??

I'm having a very similar problem.
I've got a 2010 iMac that I've got hooked up to my Pioneer Elite via HDMI cable using the Moshi adapter.
It's been working great for months, but today the audio began dropping out -- a fraction of a second, every six seconds or so.
I installed the latest Snow Leopard update today. Does anyone think there might be a connection?
thx!

IPhone 4S - after 6.1.1 update, cannot adjust ringer volume, and odd music playback behaviour

This is a minor issue that'll probably end up in the hands of some apple tech, but I'm curious to see if anyone else is experiencing this.
After updating my phone to 6.1.1, I noticed that occasionally I did not hear anything when playing music through earphones. An attmept to adjust the volume simply displayed the "ringer" icon and no volume meter. When I launch a new song from stopped (not paused), there was no sound or any ability to control it. I unplugged the earphones; the play icon remained, it normally disappears indicating a pause. Plugged back in and music started coming through.
Text/Ring tones are still audible; good because I use it as an alarm clock. The phone is behaving as though it were "docked" though the music playback thing is just weird. I haven't tried playing music while it is actually docked yet.
Will try a restore tonight after work.

Ok, so I found this thread in another part of the forum and thought "hey maybe I should try that". I borrowed a can of compressed air from the IT guys and fired it into my phone's dock port. A few particles of who-knows-what came flying out. I've been testing it pretty thoroughly for the past hour, so far it seems to be back to normal. How a dirt particle can short the docking circuitry into thinking it's docked, I have no idea, I'm not an electronics expert...
Anyone having the same issue, go grab a can of compressed air, blow it into your phones ports (both dock and headphone jack), or try the toothbrush thing in the above link. If you use a dock regularly, keep it clean!

I cannot adjust my volume level

I'm really hoping that someone out there has an answer for this one. I just bought an ipod nano yesterday and excitedly added songs today, however, I discovered that I can't change the volume level. I can play the songs and adjust the scroll bar in the volume control screen but the volume does not change at all. I've searched various forums for volume control solutions but the only topic I can find involves setting the maximum volume control, I can't find any answers to simply being able to change the volume on a currently playing song. I even tried restoring my ipod, that didn't fix the problem. I'd really appreciate any suggestions you might have!

I had the exact same thing happen on my 2 day old nano! Using the scroll wheel to adjust the volume only resulted in the volume (and volume bar) going down for a sec and then going right back up to the orginal volume. I reset my nano and it seems to have solved the problem.
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
After I did this it worked fine!

My iphone 4s doesn't have music coming from the speaker and I cannot adjust the volume, however my phone rings and works with headphones. any suggestions?

I got my phone recently and for some reason the speakers arent working. I can only hear my music and ajust the volume if the headphones are plugged in but it doesnt solve anything if they arent plugged in. Please help me.

Hello there, Ashleyyyy.
The following Knowledge Base article should get you going on resolving your issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Cannot Adjust Recording Volume (XFI Elite P

Hello, I'm having trouble with my XFI Elite Pro. Whenever I go to record something and I select the device I want to use the volume knob automatically goes down to the third line. If i turn to turn it up or down it automatically shots back down there instantly. The playback knobs all work fine its only the recording ones and its every device I have that does it. Has anyone ever had this problem? I tried updating to the newest driver/firmware but it didn't change anything. Thanks in advance!

Melvoidium,
I've received many direct communications recently, but don't
know if one of them was you, using a "real name", or if you are
still looking for a way to contact me privately. Assuming you are
still looking, a few notes are worthy of passing along.
1) I don't frequent the forums as much as I used to, but
there are other experts such as Paul Dewhurst and Steve Shipe, two
Community Experts who were among the very first MVP's - and others
as well - who can help when I'm not around. So please, consider
using these User Forums as your first choice in asking questions.
You will get answers, and those answers can be shared with others
when the conversation takes place here.
2) That said, thank you for the vote of confidence in asking
how to reach me. If you really feel it is in your own and others
best interests to communicate one-on-one, you can contact me by
clicking my pseudonym, "CatBandit" in the left column on this or
any other thread. That will take you to my profile, and my email
address is located there - just click it.
Hope this helps.

Need help turning off my Ipod touch, I tried holding the power and home button, nothing turns it off. I also cannot adjust the volume. Can anyone help?

Im looking for someone to help me out with my Ipod.

Plug your iPod into your computer go to the iPod summary tab:,
Then click restore:
Hope this helps.
It should fix the problem,
but it takes about 30 minutes.
You will have to sync your media back to your iPod.

Audio and Video sound cuts out when adjusting the volume whilst playing powerpoint presentations

I have just bought a new hp laptop and when running power point presentations with embedded media (for my job) I cannot adjust the volume of the sound when the audio or video file is playing. It simply cuts out and stops the video or sound from playing. I thought at first that this might be an Office 2010 issue but now it seems more likely to be a setting on the laptop. If anyone has any answers they would be much appreciated!! Many Thanks

I hear you on this. I just tested out the 3GS video for a concert where band mixed electronica and guitars.. boom boom satellites and I noticed when close to the speaker side of the stage the sound cut in/out. But when I moved farther away sound remained consistant.
What I may suggest is lowering the volume to mid range when closer to your sound source then
correct (if needed) using outside software.. iMovie Final Cut, etc..
Yes, I wasn't to please about losing sound on a what I recorded.. ~A~

Cannot adjust volume during calls on iPhone 6 (using EarPods)

I cannot adjust my volume on the iPhone 6 during the call on the EarPods. I can only adjust volume while the call is ringing or before a call, but once the person picks up, neither the phone's buttons or EarPods would adjust volume. It's once when I hang up and my music starts playing again, the music blasts my ear from the volume change I did (during the call).
The volume button works fine during calls when I don't use any earphones.
Is there a way to fix this?

Good Afternoon lopakamac,
If you are having trouble hearing a conversation on your iPhone, try the following steps:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Turn up the volume
While you're on a call, adjust the volume with the volume buttons:
Also while you're on a call, make sure that you can see the volume indicator on the screen when you press the volume buttons:
Check the connections
If your iPhone is connected to a headset, you won't be able to hear through the iPhone receiver or using speakerphone. Follow these steps, testing after each.
Make sure that you don't have anything plugged in to the headphone jack or the dock connector.
Go to Settings > Bluetooth and turn off Bluetooth.
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
Restart your iPhone and test again.
If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Last Modified: Feb 11, 2015
Regards,
- Judy

Can not adjust the volume up usine the selector on the head phone, on my i have the iPod shuffle 3rd generation

I have an iPod Shuffle 3rd Generation (2G) and cannot adjust the volume up or down using the (+/-) selector on the headphones (original equipment). It has worked in the past, so not sure if the reason is because I changed a setting on my ITunes Library web-page?? Thanks

Just Google for: mic for ipod touch. You will find my hits.
http://touchmic.com/
http://www.cellphoneshop.net/microphone.html?CAWELAID=513810317&gclid=CIP-svXuy6 8CFUGo4AodXy-xaQ

Cannot adjust record audio level with I-Mic as audio in

Hi,
I would like to record audio from my stereo through my Griffin Technologies I-Mic connection using Audacity audio software. I cannot adjust input recording audio down even though I have completely turned off the input audio on Audicity. The recording audio is pegging red and the recorded playback audio is completely overmodulated. The audicity help techs believe the problem lies with my sound card, which happens to be the Sound Blaster 24 bit.
Months ago, I was able to do it, but this time around had no success. Is there something that I can click on the soundblaster that will allow audicity to properly adjust the input audio?
Karl

Wow, here I go again..... I found out how I locked up the audio track of my video file.
After I re-imported my original video recording, and had adjusted the volume level, I had to expand my video image to fill my "canvas". When I went to transform this layer, I was told I must first convert this to a smart object. As soon as I did that, the track turned from blue to purple!
I would hope that if I edit my original video track in such a simple way, that I would NOT loose access to adjusting the volume of my video track...... But that is the odd way that this works.............
Chuck

Audio timeline - Cannot adjust mp3 or m2t on certain tracks in CS4 ?

Hi folks,
Proud new owner of CS4 and love it except that I'm in real dire straits with the audio timeline, particularly specified tracks.
Own a Canon XH A1 and imported HDV as m2t files via HDVsplit. Nothing new there and don't think it matters anyway... But when I drag just audio onto the timeline, I cannot adjust it at all. Meaning, if I use the 'Selection Tool (V)', once audio is placed in timeline it is unselectable. Even more strange, I can only select it if I use the 'Track Select Tool (A)', but even then my only option is to delete or move it (plus everything else following it on the same selected timeline). Anyone know what is happening?
Even more strange is that some clips will fall into a different track in the timeline and be selectable, but everything in another audio track on the timeline is not selectable. I cannot even right-click on such a track in the timeline.
This is driving me crazy, I can't find any information on this on forums or on Google... Is it just me?!!
Chris

Hi again,
I just answered my own question after messing around with it for a third day! Just in case anyone else comes across this too, it's a matter of clicking on the keyframes on the track header and choosing 'show clip volume' or 'show clip keyframes' and not 'show track keyframes' or 'show track volume' as then you won't be able to do anything with the clips dragged onto the timetime (except change overall track)...
It sounds so obvious to me now, but it had me fooled long enough to go searching everywhere for help.

Adjusting audio volume for all slides?

I can easily do this for one slide, but when I Shift-click to
select all slides, then apply Captivate's Audio / Edit Timing menu
option, the dialog shows me an Adjust Volume option that adjusts
the volume for all slides in the movie. But, when I adjust the
volume and press OK to exit the dialog, the new volume setting is
not saved with my movie. Is this a bug? Anyone?

Hi boonedogr and welcome to our community
In the words of Yoda: Hmmm, seems a bug we have found!
So here is how to make it stick.
1. Click Audio > Edit timing... and you should see the
"Edit Audio Timing" dialog.
2. Click the Insert Silence toolbar button. This should
produce the "Insert Silence" dialog.
3. Change the "Insert" field so it reflects 0.001seconds of
silence.
This step is necessary to trick Captivate into accepting the
audio has indeed changed. I use 0.001 seconds as it is the minimum
you can insert and it should have absolutely no discernable effect
on your movie.
4. Now click the Adjust Volume button to see the "Adjust
Volume" dialog where you can alter the volume level as well as
boost dynamics and whatnot.
5. Make adjustments as desired.
6. Click OK to dismiss the Adjust Volume dialog.
7. Click OK to dismiss the Edit Audio Timing dialog
At this point, you should notice several progress indicators
as the audio clips for all slides with audio are adjusted to
reflect your new settings.
*NOTE: This will have no effect on Background Audio or Object
Level Audio. Those clips will need to be adjusted manually as a
separate process.
Hope this helps a bit... Rick

Flash player crashes when adjusting audio volume

MacBook Pro, OS X Version 10.9.5
Safari internet browser, version 7.1
I am taking online classes via megameeting.com. When loading the classroom, flash works perfectly fine. However, as soon as I adjust the computer's audio volume (either by pressing the keyboard button or manually clicking and dragging the volume adjustment slider bar on my desktop), I immediately get a white screen with a gray "plugin failure" message.
I can run the same classroom simultaneously on the same computer utilizing google chrome, and flash does not crash on the chrome browser when I adjust the volume.
I followed the directions to perform a clean uninstall and reinstall (running Flash version 15), and I still have the same problem. My settings are set to allow internet plugins. So far, I have not detected this problem where adjusting the audio volume crashes flash on other websites. Any help?

Hi Gboyaj,
I've reported this bug 2 weeks back but it seems adobe doen't takes it seriously. Because no response bij adobe yet.
So please vote for this bug!
Bug#3828515 - Flash plugin crash when using volume buttons and EnhancedMicrophone on mac with Safari and Firefox
Kind Regards
Marcel

Adjusting Audio Volume Levels

Often, one has Audio that is too loud, or too soft. Sometimes, they have added a music Track, that needs to drop down to clearly hear the dialog from another Clip. While there are Audio-editing programs, like Audition, SoundBooth, and even the free Audacity, PrE, or PrPro can handle such adjustment just fine. These adjustments can be made for the entire Clip, or can be Keyframed over time.
First method, and not one that I recommend, is to adjust the Audio Gain of the Audio Clip. This is done by either Rt-clicking on a separate Audio Clip, or by first Alt-clicking, and then Rt-clicking on a Muxed Audio Clip (Multiplexed with both Video and Audio in one file). Then, one would choose Audio Gain, and adjust that. This method will also allow one to then adjust the Volume by a greater amount, and has the bonus of increasing the Waveform Dislay vertically.
The next method is to look at the Audio Clip (or the Audio portion of a Muxed Clip), and click-drag on the yellow-orange “rubberband” for Volume, and move it up, or down. This can be Keyframed, but the next method is much better and more precise, in my estimation.
My first choice is to adjust the fixed Effect>Volume. This is done from the Effects Control Panel, and it is very easy to Keyframe these adjustments over time. This is much more accurate, and actually easier, than click-dragging the rubberbands in the Clip itself. Accessing the Effects Control Panel is slightly different, from PrE to PrPro. In PrE, one would Select the Audio Clip, then go to the Effects Tab, and choose Edit Effects, locating the Volume Effects and twirling it open to view the slider. In PrPro, if one does not already have the Effects Control Panel in a Pane in the GUI, it would be accessed from Window>Effects Control Panel. With the Audio Clip Selected, one would locate the fixed Volume Effect, twirl that open, and make the same adjustments, including Keyframes, if necessary. These will be Clip Keyframes, and will follow that Clip, where ever you move it. This is a difference from the next method.
My other choice would be to use the Audio Mixer (Window>Audio Mixer, if not open), and to automate the Volume settings. This is accomplished by playing the Timeline and adjusting the sliders for Volume for each Track. In PrPro, one would first set the Send to Write, or Touch, to make those adjustments, then switch back to Read, when done. There are no adjustable Sends in PrE, so one is always in Read, until adjustments are made, and then it’s set to Write, but you will not see this change. After you are done, you can playback the Timeline, and watch the slider(s) automatically move. These will be Track Keyframes, and will remain on the Track, regardless of what Clips you add/remove from that area of the Track. Unlike the Clip Keyframes, these will NOT follow the Clip.
One can toggle the Keyframe of an Audio Track between Clip, or Track. Also, the default frequency of Audio Track Keyframes in PrE & PrPro is a bit high, in my opinion. I drop these down a bit in Edit>Preferences.
For the Keyframing, one can alter the Velocity of the Keyframes to Bezier from Linear, and the adjustments will be a bit smoother. Besides the Bezier, one can use Ease-Out and Ease-In, which are Bezier, but basically in a Preset. In PrPro, one has several different Bezier options. In PrE, one is a bit more limited.
For setting the Volume, I recommend that one only glance at the Levels Meters (unless they are peaking in the red), and instead use a pair of high-quality headphones (noise canceling models are worth the money), or fully calibrated studio monitors. Let your ears make the decisions for you, as the dB settings should only be a starting point.
In PrPro, one can also Rt-click on the Audio Clip, and choose Edit in Audition (if you have it installed), or Edit n Soundbooth (if you have one of the suites).
Here is a look at Audio Keyframes in PrPro 2.0. Things are similar in PrPro later versions, and also in PrE, with the above noted differences:

Here are some AdobeTV tutorial links for Premiere Elements Audio:
http://tv.adobe.com/watch/learn-premiere-elements-11/adding-and-customizing-an-audio-effec t/
http://tv.adobe.com/watch/adobe-digital-school-collection/audio-mixing/
http://tv.adobe.com/watch/learn-premiere-elements-10/get-professionalquality-sound-through out-your-movie-/
http://tv.adobe.com/watch/premiere-elements-9-how-tos/enjoy-a-perfect-balance-of-audio/
Hunt

CANNOT ADJUST AUDIO VOLUME IN BEATS AUDIO

Similar Messages

Maybe you are looking for