Cannot Adjust Screen Brightness with Fn Keys on New L540 (8.1 x64)

Hello everyone. I just purchased a new L540 with Windows 8.1 x64 on it and have run into a problem I'm seeing is apparently common. While my other Fn keys work as intended, I cannot adjust screen brightness with them. Pressing the buttons just does nothing and the laptop is running at full brightness at all times, even when on the battery. I have installed the latest Power Management Driver and from what I can tell, there is no version of the Power Management Software for anything newer than Windows 7. I also have installed the latest Hotkey driver (in fact, I've installed all the latest drivers for this machine.) I read in another thread that this can be caused by the latest HD Graphics driver from Intel but I actually can't even install that driver (says my system is not supported) so I am still using the latest Lenovo provided driver.
Can anyone please assist with this? I want to be able to quickly adjust screen brightness when on battery but I can't do that at present. Thanks!
Solved!
Go to Solution.

I have the same problem with my L540. It started with the update of the BIOS to version 1.65. Because I didn't find a solution, I went back to BIOS version 1.64, where all the brightness options are there and work properly.
You can download older versions. When on the page with the new drivers (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS037285) go to BIOS Driver 1.65, then choose "learn more". At the end of the following page you'll see all the older versions.
That you can install version 1.64, you have to change the "Secure RollBack Prevention" Option in the BIOS: Restart the Computer. When you see the option "To interrupt normal startup, press Enter", press Enter. Press once again Enter. Press F1 to enter the BIOS Setup Utility. Choose "Security" -> then "UEFI Bios Update Option" -> then "Secure RollBack Prevention". Change this option to "Disabled". Then press F10 to save configuration changes and exit.
After restarting Windows you can install BIOS 1.64.
Another possibility is to wait for the next BIOS version ....

Similar Messages

Cannot Adjust Screen Brightness after Windows 10 Update

I Cannot Adjust Screen Brightness after i update my windows 8 os to windows 10. please give me solution. thank you

c00lajay wrote:
I have tried uninstalling the Graphic drivers, re installing from hp assistant, I even tried directly from Intel drivers but it is not letting me adjust brightness =( Latest driver version to my 4400 Gcard was 27/07/2015 I guess we have to wait since those drivers are win8.1 compatible only =(
Hey, I tried updating the driver, I googled something like intel graphic 4400 windows 10
Then I found this link
https://downloadcenter.intel.com/download/25150/Intel-Iris-Iris-Pro-and-HD-Graphics-Production-Driver-for-Windows-10-64-bit
read at descriptions to see compatible chipset. After I downloaded it started installing and the screen starting to do the "power off" think it does whenever you're installing video drivers et voila! ´the brightness went down and now my "brightness up and down" keys are working ='3
I hope this help you guys

Have Upgrade Graphic Card Driver, But Still Cannot Adjust Screen Brightness and Sleep Button Not Showing After Clean Installation of Windows 8.1

I have done clean installation of Windows 8.1 on my HP Pavilion G4.
Then I realize that I cannot put my computer on sleep mode and cannot adjust screen brightness.
I understand that those problems caused by the graphic card driver.
My computer is running on AMD Radeon HD 6400 series.
Thus, I manually search on internet and found a latest graphic card update on microsoft site that is claimed compatible on windows 8.1 (link: http://msdn.microsoft.com/en-us/library/windows/apps/dn344644.aspx).
I've upgraded it into the latest one. I've check on Device Manager, the driver is running well.
But my problem did not solved!
Please give me the solution!

Hi,
How about go to Device Manager, then uninstall Graphic driver and restart your computer, system will install its build in graphic drver. You can have a try.
In addition, access to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Brightness and set its value to 100 for test.
Roger Lu
TechNet Community Support

Cannot Adjust Screen Brightness after Windows 8.1 Update

Cannot Adjust Screen Brightness after Windows 8.1 Update....i am using sony vaio laptop....i recently updated windows 8 to 8.1

Hi:
Most likely you need to install the graphics driver for W8.1 from your PC's support and driver page.

Cannot adjust screen brightness

I have a Lenovo G585 and after updating to Windows 8.1 can no longer adjust the screen brightness, it used to work fine. I also had a problem with sound after I installed 8.1 but managed to fix that.
Adjusting the brightness from Settings > Brightness does not work, nor does adjusting brightness from Battery Life > Adjust Screen Brightness or by using fn + up/down key.

hi jackbeazley,
Welcome to Lenovo Community Forums!
Open Device Manager and open Display adater.
Right click on AMD graphics and choose Uninstall
Be sure to place a check under delete driver software for this device.
Now Restart the computer and install this driver
AMD Video Driver
Check if the Screen Brightness will work now
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cannot adjust display brightness via F-keys nor Preferences

After updating Mavericks to 10.9.4, I cannot adjust the display brightness. Using the F1-2 keys will show the brightness icon that usually pops up. However, it's stuck and nothing happens when I press either F1 or F2 (the brightness keys).
I tried going into Preferences and adjust the brightness from there. "Automatically adjust brightness" is not checked and when I drag the slider, it slides back to where it initially was.
How can I fix this problem?
Thank you in advance,
Filip

Hello Gnazty,
Thanks for using Apple Support Communities.
I'd like you to reset your SMC and PRAM as the articles below describe:
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Take care,
Alex H.

Cannot adjust screen brightness in Windows 8.1 on my G50-45

Hello there,
I just bought my new lenovo and instantly upgrade the system software into Windows 8.1.
Everthing looks fine instead of the screen brightness adjustment, i've downloaded the latest graphic drivers but nothing happened.
The display adaptor section into device manager keeps showing up that the driver is Microsoft Basic Display Adaptor rather than AMD radeon R2.
Thanks in advance guys.

hi kostas-mi , ecountered that issue a month ago and was able to resolved it
things you can try:
1- you can roll back the driver back to its stock state, if this doesnt work ,
2- install latest driver of your graphic card
3- This step will fix the problem:
- go to registery by regedit and change the value to 0xf048
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"FeatureTestControl"=dword:0000f048
OR
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0001]
"FeatureTestControl"=dword:0000f048
Dont fake the funk............

Cannot adjust screen brightness after BIOS update

I was able to adjust my laptop screen brightness but after the BIOS update:
https://bbs.archlinux.org/viewtopic.php?id=132077
I'm not any-more able to adjust it by hitting F2 / F3
Any good suggestion on what to use to manage volume, /brightness etc? or why now isn't working anymore?
Thanks.

HI,
thanks for the heads up, however I think the problem could be related also to my keyboard layout.
Current
cat /etc/X11/xorg.conf.d/10-synaptics.conf | grep -i model
Option "XkbModel" "hpdv5"
Actually my HP is dv6 and I see now that the keyboard is totally different:
DV5 http://images.google.com/imgres?q=hp+dv … 29,r:0,s:0
DV6 http://images.google.com/imgres?q=hp+dv … 29,r:1,s:0
What Xkbmodel should I use?
Currently available:
$ cat /usr/share/X11/xkb/rules/base.lst | grep -i hp
hpi6 Hewlett-Packard Internet Keyboard
hp250x Hewlett-Packard SK-250x Multimedia Keyboard
hpxe3gc Hewlett-Packard Omnibook XE3 GC
hpxe3gf Hewlett-Packard Omnibook XE3 GF
hpxt1000 Hewlett-Packard Omnibook XT1000
hpdv5 Hewlett-Packard Pavilion dv5
hpzt11xx Hewlett-Packard Pavilion ZT11xx
hp500fa Hewlett-Packard Omnibook 500 FA
hp5xx Hewlett-Packard Omnibook 5xx
hpnx9020 Hewlett-Packard nx9020
hp6000 Hewlett-Packard Omnibook 6000/6100
hpmini110 Hewlett-Packard Mini 110 Notebook
Last edited by r0b0t (2011-12-25 12:53:40)

Cannot change screen brightness on HP pavilion DV6

HI,
after changing from win 7 home basic to win7 ultimate 64bit cannot change screen brightnes with function keys
HP Pavilion dv6-3055sr
P/N: WY940EA
Please help.

Hello Roma89,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that since you upgrade from Windows 7 Home to Windows 7 Ultimate you have been unable to adjust the screen brightness using the Functions keys. I would suggest that you download and install the newest version of the HP Support Assistant which if you follow the HP Support document: Using HP Support Assistant (Windows 7) should get you all the newest drivers for your computer.
Please re-post if you have any further issues. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How adjust screen brightness in Windows 7?

I used to use a Windows 98 laptop up to 3+ years ago, but since moving to Mac have largely forgotten how Windows works. I now have Windows 7 on Bootcamp and can't see how to adjust screen brightness. Surely there should be an adjuster on the System Tray (that's what it used to be called) bottom right next to the clock. I'm on 20" iMac with Apple keyboard (the long one with number pad at the right).

Does the keyboard have brightness controls on the F keys?
If these do not work: try holding fn and using the F keys.
If that does now work I have to ask: have you installed the bootcamp software? you need to make a CD (or usb stick) of drivers and software from OSX then boot into wiondows and run it.

Re: Satellite L855 and Windows 8 - can not adjust screen brightness

Hi everyone !
I installed Windows 8 on my Satellite L855 and it is running pretty well except that I can no more adjust screen brightness !!! I updated all the drivers for Win 8 but it didn't resolve the issue.
Hope someone can help me !! Thanks !!

Hi
Did you install the VAP (value added package) provided with Toshiba Win 8 upgrade assistant?
Its necessary and the brightness can be controlled pressing F button
F2 Decreases screen brightness
F3 Increases screen brightness

Not able to adjust screen brightness in Windows 8.1

hi,
I m using HP Pavillion N208TX with windows 8.1 64 bit version. i m not able to adjust screen brightness from f2 and f3 button and from the power setting also. when i press these buttons it shows the slider to adjust the brightness on top left corner of the screen but its does not adjust the brightness from low to high. i have already updated the Intel HD Graphic driver sent via link from HP Cust. care. kindly help me on this ASAP...
This question was solved.
View Solution.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are trying "Adjust Screen Brightness in Windows 8.1" for your Notebook.
We will surely assist you with this.
Please perform this step as shown below to resolve the issue:
1. Go to Search (point at upper right corner) and type Device Manager. Go there.
2. Expand Display Adapters
3. Right-click Intel(R) HD Graphics and Left-click Disable
4. Restart your computer
Note: Your screen resolution might be distorted now, you can just ignore
5. Go back to Device Manager, Display Adapters
6. Right-click Intel(R) HD Graphics and Left-click Enable
7. Restart again
Note: If at any point your screen goes blank and won't come back, just HOLD DOWN your power button until
the computer shuts down. Then press power again to start up
Hope this helps, for any further queries reply to the post and feel free to join us again
"I work for Hewlett-Packard"
* * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * *
* * * * * Please mark Accept As Solution if it solves your problem * * * * *
Regards,
K N R K

Feature Change: Remove useless adjust screen brightness button.

Remove useless button for screen brightness.
both buttons serve same function.

Oh - that explains it better.
You do know that not every computer using Windows 10 has a key available to adjust screen brightness though, right? Or, as in the case of the Surface, if you don't have a keyboard, the only way to adjust the brightness is only the software one?
For you it might not make sense, but include ~1 billion more people, and I think they should just leave both.

How to adjust screen brightness in windows 10

since i have upgraded to windows 10, i m not able to adjust my laptops screen brightness cause i m not getting the option to adjust screen brightness, nor the screen brightness up and down buttons are working. Also i have updated the graphic adapter and still the condotion is same...no change!! plz someone give me the solution to get rid of this problem

How do I assign brightness to function keys on new apple Keyboard in 10.3.9 using spark v2.1.1?

Hi There,
Following on from my recent post regarding the new apple wired keyboard after very helpful feedback from people who responded to my post I decided to take the leap and purchase it! Good news is that I am really happy with it and am glad that I got it! Much nicer then old apple keyboard that I was using.
I also downloaded spark v. 2.1.1 which has enabled me to change the functions of Fkeys to enable to play, pause, etc... in itunes in accordance with the keyboard layout. However, there are two functions that I am having difficulty assigning which are the F1 and F2 keys which allow the decrease and increase of screen brightness. Does anyone know how to do this? So that I can control my screen brightness using these keys.
Any help anyone can offer would be greatly appreciated
Thanks in advance.

I don't have a screen that can be dimmed or brightened, but does Increase/Decrease show up as an option here...
If not, use the AppleScript one to execute a Script...
http://groups.google.com/group/qlab/browse_thread/thread/a0f05cbd9d6c3570
to turn the brightness of the screen down to 0 / off:
tell application "System Events"
        tell application "System Preferences" to reveal anchor
"displaysDisplayTab" of pane "com.apple.preference.displays"
        tell process "System Preferences"
                set value of slider 1 of group 2 of tab group 1 of window 1 to 0
        end tell
end tell
to turn the brightness of the screen up to full:
tell application "System Events"
        tell application "System Preferences" to reveal anchor
"displaysDisplayTab" of pane "com.apple.preference.displays"
        tell process "System Preferences"
                set value of slider 1 of group 2 of tab group 1 of window 1 to 1
        end tell
end tell
NOTE - the only difference between the two scripts is the last number
which is either 0 or 1. You can also specify a number between 0 & 1. For
example, .5 = 1/2 brightness & so on.
If you use these, make sure you disable "Automatically adjust brightness
as ambient light changes or else your mid bright levels well be
overridden.

Cannot Adjust Screen Brightness with Fn Keys on New L540 (8.1 x64)

Similar Messages

Maybe you are looking for