Cannot allocate memory error
Hello,
I am using:
Oracle: Berkeley DB XML 2.5.16: (December 22, 2009)
Berkeley DB 4.8.26: (December 18, 2009)
When attempting to open a container in an environment where the application process has been running for a while I get the following error:
XmlDatabaseError: XmlDatabaseError 12, Error: Cannot allocate memory
The Python bindings do not have support for errcall. I have added errcall support to the bindings but I do not appear to be receiving any message (but it is new code so I do not trust it completely).
Running the dbxml shell tool I get:
[root@localhost db]# dbxml
Joined existing environment
dbxml> open test.dbxml
stdin:1: openContainer failed, Error: Cannot allocate memory
dbxml>I don't appear to be out of locks:
127786 Last allocated locker ID
0x7fffffff Current maximum unused locker ID
9 Number of lock modes
20000 Maximum number of locks possible
10000 Maximum number of lockers possible
20000 Maximum number of lock objects possible
1 Number of lock object partitions
639 Number of current locks
691 Maximum number of locks at any one time
10 Maximum number of locks in any one bucket
0 Maximum number of locks stolen by for an empty partition
0 Maximum number of locks stolen for any one partition
1282 Number of current lockers
1320 Maximum number of lockers at any one time
571 Number of current lock objects
622 Maximum number of lock objects at any one time
3 Maximum number of lock objects in any one bucket
0 Maximum number of objects stolen by for an empty partition
0 Maximum number of objects stolen for any one partition
998958 Total number of locks requested
997936 Total number of locks released
0 Total number of locks upgraded
13055 Total number of locks downgraded
0 Lock requests not available due to conflicts, for which we waited
0 Lock requests not available due to conflicts, for which we did not wait
0 Number of deadlocks
0 Lock timeout value
0 Number of locks that have timed out
0 Transaction timeout value
0 Number of transactions that have timed out
10MB 152KB The size of the lock region
0 The number of partition locks that required waiting (0%)
0 The maximum number of times any partition lock was waited for (0%)
0 The number of object queue operations that required waiting (0%)
0 The number of locker allocations that required waiting (0%)
0 The number of region locks that required waiting (0%)
3 Maximum hash bucket lengthOr transactions:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
35511/10059360 File/offset for last checkpoint LSN
Thu Aug 12 17:25:26 2010 Checkpoint timestamp
0x80007128 Last transaction ID allocated
100 Maximum number of active transactions configured
0 Active transactions
3 Maximum active transactions
28968 Number of transactions begun
16699 Number of transactions aborted
12269 Number of transactions committed
0 Snapshot transactions
0 Maximum snapshot transactions
0 Number of transactions restored
40KB Transaction region size
0 The number of region locks that required waiting (0%)
Active transactions:Or mutexes:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
6MB 112KB Mutex region size
0 The number of region locks that required waiting (0%)
4 Mutex alignment
1 Mutex test-and-set spins
50000 Mutex total count
39829 Mutex free count
10171 Mutex in-use count
10201 Mutex maximum in-use count
Mutex counts
39829 Unallocated
509 db handle
1 env dblist
2 env handle
1 env region
4 lock region
691 logical lock
1 log filename
1 log flush
2 log region
815 mpoolfile handle
3896 mpool buffer
63 mpool filehandle
17 mpool file bucket
1 mpool handle
4099 mpool hash bucket
1 mpool region
1 mutex region
62 sequence
1 twister
1 txn active list
1 transaction checkpoint
1 txn regionAny ideas?
See unable to allocate memory for mutex; resize mutex region
Edited by: Vitaliy Katochka on Nov 23, 2010 4:31 PM
Similar Messages
-
Cannot allocate memory error in Oracle 10.2.0.2
I am using Oracle 10.2.0.2. When will I get the below error. What to do to resolve this issue. Can somebody help me on this
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:28:17Thanks in advanceROW-00001 Cannot allocate memory
Cause: There is not enough memory to run the application.
Action: Close unneeded applications or increase the virtual memory.
Or
Note:387818.1 - did this metalink note help you? -
Can't restore from .dmg file "cannot allocate memory- error"
Im trying to install OS X 10.6 from an .dmg file because I have trouble with my dvd reader.
I have followed this steps from this thread: https://discussions.apple.com/thread/2764247?start=0&tstart=0
select your .dmg file and open with Disk utility
02. select your Mac os X image from left panel box and then choose restore
03. drag and drop the Mac os image to source
04. drag and drop Mac's partition to destination
05. click restore
I get "cannot restore, cannot allocate memory". Any ideas? Thanks in advance
Mac Pro OS X 1.6.6, 4 discs (one to make fresh install - 2TB WD), 2x2.66Ghz, dual core Intel XeonHi LInc. I tried your choice and succesfully installed over a 16GB pendrive. But could not do that with the 2TB green caviar... I also found that there are some issues with this kind of drive in the fourth bay, so I will change it to see if there is any difference. Cant make it work with TMachine also (known issues there too).
-
NFSv4: cannot allocate memory errors when moving files
When I move a directory on an NFS client to another location then I can't create a file on that other location anymore:
[willem@venus ~]$ mkdir test
[willem@venus ~]$ mv test /pub/music
[willem@venus ~]$ cd /pub/music/test
[willem@venus test]$ touch a
^C
the touch command does nothing on the nfs client (it hangs, so I Ctrl-C).
When I logon to the NFS server the following happens:
[willem@titan W]$ cd /pub/music/test
[willem@titan test]$ touch x
touch: cannot touch 'x': Cannot allocate memory
[willem@titan test]$
This only happens if the mv command moves the directory over different NFS mount points.
I have an older arch NFS server with a 3 months old arch install, and this issue does not occur there.
If I mount the nfs client directories with nfsvers=3 in my fstab then it also does not occur, so it seems to be broken in a recent update in NFS4I've tested using a very small SGA and PGA (200Mb and 100Mb), although normally I would have it set higher.
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.panic = 300
kernel.sysrq = 1
net.ipv4.tcp_syncookies = 1
# Oracle XE Recommended Values
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
######## -
"cannot allocate memory" When trying to start a new project in FCPX
So I am I getting the "cannot allocate memory" error whenever I try to start a new project in FCPX
System specs:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
ATI Radeon HD 5870:
Chipset Model: ATI Radeon HD 5870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
"Movies" folder is on a drive with about 120 GB free. The folder is not locked. Imovie uses the same folder, and that works.
The account is not a server account.
I've removed all preferences and all references to FCPX, reinstalled, no difference.
I have tried every suggestion on every apple support discussion thread, save reinstalling the OS, which I will not do. Nothing works.
FCPX won't let me select a default location for projects, either.
This is the only application on my system that doesn't work. Anyone have any suggestions?I figured it out:
FCPX does not support NTFS drives, even with Paragon NTFS working perfectly for everything else on the system.
I guess Apple (just) assumes that nobody will, or should, be using any other filesystem than Mac with FCPX.
I wasted hours looking for a solution, when a better error message besides a misleading "cannot allocate memory" could have been something more useful.
Not impressed. -
Hi,
my application page showing
OraOLEDB(0x80040E14)
ROW-00001
Cannot allocate memory
error
please suggest
Oracle 9i
Oledb 9i
windows 2003https://www.dba-village.com/village/dvp_forum.OpenThread?ThreadIdA=5094
does it helpful ?
Sriram -
Db_load error: Cannot allocate memory
Hi
when I try to import an dump file, i always get this error:
db_load: BDB2055 Lock table is out of available lock entries
db_load: Cannot allocate memory
I executed "db_load -f outdb/outdb2 -h env xass.db"
and i have set max locks by:
dbenv->set_lk_max_locks(dbenv,1000);
but it doesn't work.
What should I do to prevent this problem?
Thanks for your help in advance
Mark
Update:
I have doing some tests, and i found that if I increase the number of locks by "set_lk_max_locks" in DB_CONFIG file, the operation of db_load will success.
The point is that the larger db file may need a very big value of locks, so why "db_load" doesn't release the locks during the running procedure? Is this a bug for bdb?
becuase I can't increase the number of locks infinity!
if not, How can i cause "db_load" release the locks of transaction?
Does anybody can help me?
MarkHi Mark,
If you are importing a dump file into an existing environment and opened with the flags of(can have more) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true you may see the error about "lock table is out of available lock entries" when the dump file is very big. The db_load process will not release the locks since it needs to provent other process from accessing the database being built to provide data consistency in the transactional environment.
The usually way for loading a database from a dump file is to specify an empty directory as the home directory. By this, the database will be created in a private non-transactional environment, and you can copy the database into your running environment after the db_load process finishes.
Regards,
Winter, Oracle Berkeley DB. -
I am not able to access Safari on my ipad. I get the error message: The operation couldn't be completed. Cannot allocate memory. Can anyone help please??
Try this first.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reboot the iPad - or quit all apps and restart.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad. -
I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
I am trying to retrieve the information on my hard drive after I spilled liquid on my keyboard . I can get to Disk Utility by using the boot up disk but when I try and copy the hard drive to an external device using "New Image" it tells me it is unable to create a copy because it "cannot allocate memory".
Were you able to get any help with this problem? My MacBook Pro out of the blue wouldn't boot up all the way and now I'm trying to get a copy of everything onto the new external drive using disc utility but am having the same errors as you! Thank you for sharing any tips!! -Norah
-
Itouch safari says "POSIX error 12-Cannot allocate memory"???
My wireless says full signal but whenever I try to connect to Safari the window pops up and says "Operation could not be completed-POSIX error 12-Cannot allocate memory"??? Anybody have any ideas for me...please??????
Follow both the solutions in [this thread|http://discussions.apple.com/thread.jspa?messageID=6637319] of first restarting the ipod, if that doesn't help, then reset network settings.
-
Safari - POSIX error 12 - cannot allocate memory
I am trying to use my ipod touch for the internet. When I try to go to a site I get the following error.
Safari can't open the page.
The error was: "Operation could not be com0pleted.
(POSIX error 12 - Cannot allocate memory)"
(NSPOSIXErrorDomain:12)
How do I get past this errorIf you haven't already done so, I'd suggest rebooting your iPod. This isn't the same as turning it off with a quick tap to the button on top. Quite often a reboot of a computer will clear up a temporary memory issue. From the ipod touch manual:
Press and hold the
Sleep/Wake button on top of iPod touch for a few seconds until a red slider appears,
then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo
appears.
Hope this solves it and you don't see the error again. -
POSIX Error 12 - cannot allocate memory
Hi
I am having trouble to connect the iPod Touch to my home network, I can see that it recognize my netzork but when I try Safari I got the error 'Safari can't open the page, The error was "Operation could not be completed (POSIX error 12 - cannot allocate memory) (NSPOSIXErrorDomain:12)
I wonder if the network is recognized through Safari.
Do you know where to find the list or errors and correction?
How do you know on Safari if you are connected to the network ?
On my settings I got an IP address and all the parameters.
Thanks for your helpIf you haven't already done so, I'd suggest rebooting your iPod. This isn't the same as turning it off with a quick tap to the button on top. Quite often a reboot of a computer will clear up a temporary memory issue. From the ipod touch manual:
Press and hold the
Sleep/Wake button on top of iPod touch for a few seconds until a red slider appears,
then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo
appears.
Hope this solves it and you don't see the error again. -
Abcde: "scsi_read error Cannot allocate memory"
I receive the following error when abcde tries to rip an audio CD:
scsi_read error: sector=1631 length=20 retry=0
Sense key: 0 ASC: 0 ASCQ: 0
Transport error: (null)
System error: Cannot allocate memory
I'm using a USB optical drive if that makes any difference.
Last edited by lexan (2014-09-24 01:04:42)jasonwryan wrote:Have you tried with another CD?
I've tried with other audio CDs and get the same error.
I also tried the device succesffully (ripping and reading) on a mac osx computer to see if it was a hardware device issue.
The error suggests a memory issue, but I have over 2.6 GB free.
Edit: hardware model: samsung portable dvd writer model se-218
http://www.amazon.com/Samsung-Portable- … ter+se-218
Last edited by lexan (2014-09-28 17:09:02) -
IBook - "POSIX Error - Cannot allocate memory"
When attempting to use the Software Update, I get the following message: "POSIX Error - Cannot allocate memory."
Also, when attempting to access Safari, the following message is displayed:
Other suggestions previously have not worked, such as Preferences, Disk Warrior, etc.
Are there any others that may be recent or ground breaking? Is it possible that Tiger is simply at the end of its lifecycle?I use Tiger everyday as my main OSX, no such problems, though there are no Software Updates for Tiger for a long, long time.
Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
See this, especially last post...
http://hintsforums.macworld.com/showthread.php?t=65149
OOPs... see you sloved it!
Maybe you are looking for
-
Hello, When entering customer number in FD32 it shows "Central Data not mentained for the Customer" Please help to solve this error.
-
Folks, I am trying to create exemption Infotype T0582 (India) right from 01.04.2007 onwards, it returns Changes not allowed for dates outside fiscal year Is it a standard that SAP wont allow changes to be done retro for exemptions for the previous
-
Created EUL - Oracle Apps users only
Hello, all! An EUL was previously created and the Oracle Apps users only was checked, which was supposed to be not. Business areas and folders were already created and i want to reuse all. Is there a way i can change the EUL to make it not for oracle
-
Hello everybody. I dont know why it doesnt work.I am trying to find the char with the Max occurence in a file but nothing. Thank you try{ in=new BufferedReader(new FileReader("a.txt")); String s=in.readLine(); while(s!=null){ for(int i=0;i<s.len
-
I'm attempting to do a full backup of my boot drive to an external hard drive using Disk Utility to create a disk image. For some reason, it always gets to a certain point, and then locks up. This morning when I came into the office, it was locked