Cannot allocate memory

Hi,
my application page showing
OraOLEDB(0x80040E14)
ROW-00001
Cannot allocate memory
error
please suggest
Oracle 9i
Oledb 9i
windows 2003

https://www.dba-village.com/village/dvp_forum.OpenThread?ThreadIdA=5094
does it helpful ?
Sriram

Similar Messages

Safari won't open web pgs, says cannot allocate memory - HELP?

Just got iPod Touch, connected to WiFi, but any web page I try to open with Safari gives me the same message: *POSIX error 12, Cannot allocate memory. NSPOSSIXErrorDomain.* What on earth does this mean, and why can't I open any websites??? Grateful for any assistance! Thanks - lizmo

I've never succeeded in opening a page yet! This is my first attempt. I get the same error message every time. Thanks for any help.

Db_load error: Cannot allocate memory

Hi
when I try to import an dump file, i always get this error:
db_load: BDB2055 Lock table is out of available lock entries
db_load: Cannot allocate memory
I executed "db_load -f outdb/outdb2 -h env xass.db"
and i have set max locks by:
dbenv->set_lk_max_locks(dbenv,1000);
but it doesn't work.
What should I do to prevent this problem?
Thanks for your help in advance
Mark
Update:
I have doing some tests, and i found that if I increase the number of locks by "set_lk_max_locks" in DB_CONFIG file, the operation of db_load will success.
The point is that the larger db file may need a very big value of locks, so why "db_load" doesn't release the locks during the running procedure? Is this a bug for bdb?
becuase I can't increase the number of locks infinity!
if not, How can i cause "db_load" release the locks of transaction?
Does anybody can help me?
Mark

Hi Mark,
If you are importing a dump file into an existing environment and opened with the flags of(can have more) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true you may see the error about "lock table is out of available lock entries" when the dump file is very big. The db_load process will not release the locks since it needs to provent other process from accessing the database being built to provide data consistency in the transactional environment.
The usually way for loading a database from a dump file is to specify an empty directory as the home directory. By this, the database will be created in a private non-transactional environment, and you can copy the database into your running environment after the db_load process finishes.
Regards,
Winter, Oracle Berkeley DB.

Can't restore iPod classic 60GB video. Cannot Allocate Memory - Disk Utility

Sorry if this has been asked before but I've been searching the boards and am yet to find a result.
I have an old iPod classic 60GB (video) which has a dodgy HDD. It was clicking and in a constant sad face/charging loop. I've managed to get it display "Please restore iPod" message and it is now being recognised by my macbook. I've tried to restore it via iTunes but when I try that I get an error message tht says "The iPod could not be restores because it is busy".
I've tried toformat the iPod using Disk Utility too but i get an error:
Disk Erase failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
The oddest thing is that under disk utility my iPod drive is showing up as a 2TB drive:
All I'm realy trying to do is restore the iPod so I can try to recover some of the tracks using Disk Drill. Can anybody help?

See if you can find a window based PC and try to do a Restore there.

I can no longer access Safari on my ipad. I get the error:the operation couldn't be completed. Cannot allocate memory. Help please!

I am not able to access Safari on my ipad. I get the error message: The operation couldn't be completed. Cannot allocate memory. Can anyone help please??

Try this first.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reboot the iPad - or quit all apps and restart.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.

Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

Unable to copy hard drive on to external device from Disk Utility. Getting error message "cannot allocate memory".

I am trying to retrieve the information on my hard drive after I spilled liquid on my keyboard . I can get to Disk Utility by using the boot up disk but when I try and copy the hard drive to an external device using "New Image" it tells me it is unable to create a copy because it "cannot allocate memory".

Were you able to get any help with this problem? My MacBook Pro out of the blue wouldn't boot up all the way and now I'm trying to get a copy of everything onto the new external drive using disc utility but am having the same errors as you! Thank you for sharing any tips!! -Norah

Cannot allocate memory error in Oracle 10.2.0.2

I am using Oracle 10.2.0.2. When will I get the below error. What to do to resolve this issue. Can somebody help me on this
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:27:19
ROW-00001: Cannot allocate memory||SQLSTATE0=03/18/08 14:28:17Thanks in advance

ROW-00001 Cannot allocate memory
Cause: There is not enough memory to run the application.
Action: Close unneeded applications or increase the virtual memory.
Or
Note:387818.1 - did this metalink note help you?

Oracle 8i listener issue: TNS-01168: Cannot allocate memory

We have a loader application coded in perl/c which connects to DB to load data from flat files. Whenever we have multiple such loader programs running, the listener dies and loading stops. The listener.log is around 2GB. I opened the loag and got following details:
Listener Log file (2GB file):
-- File begining ---
ECHO is on.
17-FEB-2005 20:40:20 * service_update * scanview * 0
17-FEB-2005 20:50:20 * service_update * scanview * 0
17-FEB-2005 21:00:10 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2659)) * establish * scanview * 0
19-FEB-2005 03:14:26 * service_update * scanview * 0
19-FEB-2005 04:00:09 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2486)) * establish * scanview * 0
19-FEB-2005 04:04:27 * service_update * scanview * 0
19-FEB-2005 04:07:07 * (CONNECT_DATA=(SERVICE_NAME=scanview)(CID=(PROGRAM=C:\Perl\bin\perl.exe)(HOST=AZSACTAPP107)(USER=grp_scanview))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.164.17)(PORT=2644)) * establish * scanview * 0
19-FEB-2005 04:18:21 * 51
Error Started at Line #: 2096
19-FEB-2005 04:18:21 * 51
NL-00051: internal error code, arguments: [302], [1], [], [], [], [], []
Above error continued till Line #: 913372
19-FEB-2005 04:21:15 * 1168
TNS-01168: Cannot allocate memory
19-FEB-2005 06:05:30 * 1168
TNS-01168: Cannot allocate memory
TNSLSNR for 32-bit Windows: Version 8.1.7.4.0 - Production on 19-FEB-2005 11:13:49
-- File ended ---
Is there a known bug and if so what is the resolution? Will upgrading to Net 9i help?
Let me know if anyone has faced such issue and the resolution.
Thanks
Satish

alll listeners show the TNS-12531 cannot allocate memory message in the listener.log.Only a single listener is required.
How many listeners run on this system & why more than 1?
oerr tns 12531
12531, 00000, "TNS:cannot allocate memory"
// *Cause: Sufficient memory could not be allocated to perform the desired
// activity.
// *Action: Either free some resource for TNS, or add more memory to the
// machine. For further details, turn on tracing and reexecute the operation.

My internal drive is NOT showing up in the event library in Final Cut X. I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
I am also getting error message "The operation couldn’t be completed. Cannot allocate memory" when attempting to create a new "event". Any ideas?
If I had a application disk, I would unistall and reinstall FCPX. I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
Thanks

Well it did NOT work. Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
ANY ideas . . . . Anybody . . . . APPLE?

Can't restore from .dmg file "cannot allocate memory- error"

Im trying to install OS X 10.6 from an .dmg file because I have trouble with my dvd reader.
I have followed this steps from this thread: https://discussions.apple.com/thread/2764247?start=0&tstart=0
select your .dmg file and open with Disk utility
02. select your Mac os X image from left panel box and then choose restore
03. drag and drop the Mac os image to source
04. drag and drop Mac's partition to destination
05. click restore
I get "cannot restore, cannot allocate memory". Any ideas? Thanks in advance
Mac Pro OS X 1.6.6, 4 discs (one to make fresh install - 2TB WD), 2x2.66Ghz, dual core Intel Xeon

Hi LInc. I tried your choice and succesfully installed over a 16GB pendrive. But could not do that with the 2TB green caviar... I also found that there are some issues with this kind of drive in the fourth bay, so I will change it to see if there is any difference. Cant make it work with TMachine also (known issues there too).

Cannot allocate memory error

Hello,
I am using:
Oracle: Berkeley DB XML 2.5.16: (December 22, 2009)
Berkeley DB 4.8.26: (December 18, 2009)
When attempting to open a container in an environment where the application process has been running for a while I get the following error:
XmlDatabaseError: XmlDatabaseError 12, Error: Cannot allocate memory
The Python bindings do not have support for errcall. I have added errcall support to the bindings but I do not appear to be receiving any message (but it is new code so I do not trust it completely).
Running the dbxml shell tool I get:
[root@localhost db]# dbxml
Joined existing environment
dbxml> open test.dbxml
stdin:1: openContainer failed, Error: Cannot allocate memory
dbxml>I don't appear to be out of locks:
127786 Last allocated locker ID
0x7fffffff      Current maximum unused locker ID
9       Number of lock modes
20000   Maximum number of locks possible
10000   Maximum number of lockers possible
20000   Maximum number of lock objects possible
1       Number of lock object partitions
639     Number of current locks
691     Maximum number of locks at any one time
10      Maximum number of locks in any one bucket
0       Maximum number of locks stolen by for an empty partition
0       Maximum number of locks stolen for any one partition
1282    Number of current lockers
1320    Maximum number of lockers at any one time
571     Number of current lock objects
622     Maximum number of lock objects at any one time
3       Maximum number of lock objects in any one bucket
0       Maximum number of objects stolen by for an empty partition
0       Maximum number of objects stolen for any one partition
998958 Total number of locks requested
997936 Total number of locks released
0       Total number of locks upgraded
13055   Total number of locks downgraded
0       Lock requests not available due to conflicts, for which we waited
0       Lock requests not available due to conflicts, for which we did not wait
0       Number of deadlocks
0       Lock timeout value
0       Number of locks that have timed out
0       Transaction timeout value
0       Number of transactions that have timed out
10MB 152KB      The size of the lock region
0       The number of partition locks that required waiting (0%)
0       The maximum number of times any partition lock was waited for (0%)
0       The number of object queue operations that required waiting (0%)
0       The number of locker allocations that required waiting (0%)
0       The number of region locks that required waiting (0%)
3       Maximum hash bucket lengthOr transactions:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
35511/10059360 File/offset for last checkpoint LSN
Thu Aug 12 17:25:26 2010        Checkpoint timestamp
0x80007128      Last transaction ID allocated
100     Maximum number of active transactions configured
0       Active transactions
3       Maximum active transactions
28968   Number of transactions begun
16699   Number of transactions aborted
12269   Number of transactions committed
0       Snapshot transactions
0       Maximum snapshot transactions
0       Number of transactions restored
40KB    Transaction region size
0       The number of region locks that required waiting (0%)
Active transactions:Or mutexes:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
6MB 112KB       Mutex region size
0       The number of region locks that required waiting (0%)
4       Mutex alignment
1       Mutex test-and-set spins
50000   Mutex total count
39829   Mutex free count
10171   Mutex in-use count
10201   Mutex maximum in-use count
Mutex counts
39829   Unallocated
509     db handle
1       env dblist
2       env handle
1       env region
4       lock region
691     logical lock
1       log filename
1       log flush
2       log region
815     mpoolfile handle
3896    mpool buffer
63      mpool filehandle
17      mpool file bucket
1       mpool handle
4099    mpool hash bucket
1       mpool region
1       mutex region
62      sequence
1       twister
1       txn active list
1       transaction checkpoint
1       txn regionAny ideas?

See unable to allocate memory for mutex; resize mutex region
Edited by: Vitaliy Katochka on Nov 23, 2010 4:31 PM

POSIX reports: The operation couldn't be completed. Cannot allocate memory

Hi all.
Please forgive my naivety. I'm a newbie here.
I have searched endlessly to find a solution to my problem, but cannot seem to find one.
I have just replaced a hard drive on a 13" Macbook pro (purchased end of 2009). It developed a fault, and would not boot. When turned on, would only produce a blank screen with a flashing folder featuring a question mark.
When going through disk utility, the system could not detect any internal hard drive, which made me believe it was faulty.
I ordered a 500GB Toshiba Hard Drive, and installed it as it should be. In Disk Utility, the system detects the Toshiba hard drive (it comes up in the list you'd expect it to). Whenever I go to 'Erase' or 'Partition', however, I get the following error message.
"Disk Erase/Partition failed
Disk Erase/Partition failed with the error:
POSIX reports: The operation couldn't be completed. Cannot allocate memory"
Is anybody able to offer this novice any suggestions as to what I might do? I have tried some "Terminal" entries, but they don't seem to help in the slightest.
Thanks in advance,
L.
P.S. The Macbook is using Snow Leopard.

Hi again OGELTHORPE.
I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
Thanks again for your suggestions!
L.

Cannot allocate memory - Concept Explanation Please

Hello all,
Just wanted to confirm something.
I compile a helloword class and the javac does it job.
Now when I am preparing a larger program from ant like so: /usr/local/ant/bin/ant prepareI get:Buildfile: build.xml
[property] java.io.IOException: java.io.IOException: Cannot allocate memory
[property]     at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
[property]     at java.lang.ProcessImpl.start(ProcessImpl.java:65)So more memory is required for different compilations of programs, right?
Is there a way, I can allocate all (most) memory to the javac compiler?
If I have some of my theory and terminology mixed please correct me.
Thanks all
---------Key Info-----------
java version "1.5.0_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_15-b04)
Java HotSpot(TM) Server VM (build 1.5.0_15-b04, mixed mode)
OS: Fedora 7

Thanks Peter will look into this now.
Before I find the tut/HOWTO is there any chance of the swap file damaging my server? I mean worst case scenario would be...?
Just had a look at "top" and it says "swap" on there, is that referring to something eles: (sucks to be a noob!)
top - 12:32:34 up 14 min, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 35 total,   2 running, 33 sleeping,   0 stopped,   0 zombie
Cpu(s): 0.0% us, 0.1% sy, 0.0% ni, 99.9% id, 0.0% wa, 0.0% hi, 0.0% si
Mem:   8140596k total, 8087960k used,    52636k free,    73708k buffers
Swap: 12578884k total,    28956k used, 12549928k free, 1705984k cachedEdited by: abshirf2 on Oct 2, 2008 7:32 PM
Edited by: abshirf2 on Oct 2, 2008 7:33 PM

Java.io.IOException: Cannot allocate memory

Hi all,
What is the root cause of java.io.IOException: Cannot allocate memory? the
exception is throws every several days.
the application is a web application that run in WLS 8.1 sp3.
source code that throws the exception like bellow, in a http request, the
method will be called not more than 4 times.
public void doit() throws IOException {
Process process = java.lang.Runtime.getRuntime().exec("chmod 777 -R
/fileroot");
setProcess(process);
Error message:
java.io.IOException: java.io.IOException: Cannot allocate memory
at java.lang.UNIXProcess.<init>(UNIXProcess.java:143)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:428)
at java.lang.Runtime.exec(Runtime.java:364)
at java.lang.Runtime.exec(Runtime.java:326)
Runtime env overview
1. WLS start commond
/opt/bea/jdk142_04/bin/java -server -Xms2048m -Xmx2048m -XX:PermSize=512m -XX:MaxPermSize=512m
-Dweblogic.Name=myserver -Dweblogic.management.username=wlsUser -Dweblogic.management.password=wlsPWD
-Dweblogic.ProductionModeEnabled=true
2. JVM version /opt/bea/jdk142_04/bin/java -version
java version "1.4.2_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
Java HotSpot(TM) Client VM (build 1.4.2_04-b05, mixed mode)
3. OS version # uname -a
Linux 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386
GNU/Linux
4. top command response
20:29:04 up 5 days, 13:51, 1 user, load average: 0.03, 0.03, 0.00
56 processes: 55 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 6.6% 0.0% 0.0% 0.2% 0.0% 0.0% 93.0%
cpu00 0.0% 0.0% 0.0% 0.9% 0.0% 0.0% 99.0%
cpu01 12.8% 0.0% 0.0% 0.0% 0.0% 0.0% 87.1%
cpu02 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 100.0%
cpu03 13.8% 0.0% 0.0% 0.0% 0.0% 0.0% 86.1%
Mem: 4124016k av, 2905472k used, 1218544k free, 0k shrd, 153952k
buff
1327256k active, 1262088k inactive
Swap: 2097136k av, 0k used, 2097136k free 1686144k
cached
Many thanks for reading my post and any advice would be greatly appreciated
Thanks,
Steve

Hi all,
What is the root cause of java.io.IOException: Cannot allocate memory? the
exception is throws every several days.
the application is a web application that run in WLS 8.1 sp3.
source code that throws the exception like bellow, in a http request, the
method will be called not more than 4 times.
public void doit() throws IOException {
Process process = java.lang.Runtime.getRuntime().exec("chmod 777 -R
/fileroot");
setProcess(process);
Error message:
java.io.IOException: java.io.IOException: Cannot allocate memory
at java.lang.UNIXProcess.<init>(UNIXProcess.java:143)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:428)
at java.lang.Runtime.exec(Runtime.java:364)
at java.lang.Runtime.exec(Runtime.java:326)
Runtime env overview
1. WLS start commond
/opt/bea/jdk142_04/bin/java -server -Xms2048m -Xmx2048m -XX:PermSize=512m -XX:MaxPermSize=512m
-Dweblogic.Name=myserver -Dweblogic.management.username=wlsUser -Dweblogic.management.password=wlsPWD
-Dweblogic.ProductionModeEnabled=true
2. JVM version /opt/bea/jdk142_04/bin/java -version
java version "1.4.2_04"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
Java HotSpot(TM) Client VM (build 1.4.2_04-b05, mixed mode)
3. OS version # uname -a
Linux 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386
GNU/Linux
4. top command response
20:29:04 up 5 days, 13:51, 1 user, load average: 0.03, 0.03, 0.00
56 processes: 55 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 6.6% 0.0% 0.0% 0.2% 0.0% 0.0% 93.0%
cpu00 0.0% 0.0% 0.0% 0.9% 0.0% 0.0% 99.0%
cpu01 12.8% 0.0% 0.0% 0.0% 0.0% 0.0% 87.1%
cpu02 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 100.0%
cpu03 13.8% 0.0% 0.0% 0.0% 0.0% 0.0% 86.1%
Mem: 4124016k av, 2905472k used, 1218544k free, 0k shrd, 153952k
buff
1327256k active, 1262088k inactive
Swap: 2097136k av, 0k used, 2097136k free 1686144k
cached
Many thanks for reading my post and any advice would be greatly appreciated
Thanks,
Steve

NFSv4: cannot allocate memory errors when moving files

When I move a directory on an NFS client to another location then I can't create a file on that other location anymore:
[willem@venus ~]$ mkdir test
[willem@venus ~]$ mv test /pub/music
[willem@venus ~]$ cd /pub/music/test
[willem@venus test]$ touch a
^C
the touch command does nothing on the nfs client (it hangs, so I Ctrl-C).
When I logon to the NFS server the following happens:
[willem@titan W]$ cd /pub/music/test
[willem@titan test]$ touch x
touch: cannot touch 'x': Cannot allocate memory
[willem@titan test]$
This only happens if the mv command moves the directory over different NFS mount points.
I have an older arch NFS server with a 3 months old arch install, and this issue does not occur there.
If I mount the nfs client directories with nfsvers=3 in my fstab then it also does not occur, so it seems to be broken in a recent update in NFS4

I've tested using a very small SGA and PGA (200Mb and 100Mb), although normally I would have it set higher.
# Kernel sysctl configuration file for Red Hat Linux
# For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and
# sysctl.conf(5) for more details.
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# Controls source route verification
net.ipv4.conf.default.rp_filter = 1
# Do not accept source routing
net.ipv4.conf.default.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
kernel.panic = 300
kernel.sysrq = 1
net.ipv4.tcp_syncookies = 1
# Oracle XE Recommended Values
kernel.sem = 250 32000 100 128
kernel.shmmax = 536870912
########

Cannot allocate memory

Similar Messages

Maybe you are looking for