Cannot Archive Bundle Assets

Just trying out FCS for the first time this morning and things are looking great, except for one issue I have found so far. It's great that it can maintain a folder structure when you throw a folder at it and create a "bundle asset", however, when I try to run the "archive" command on that bundled asset, it always presents me with the following dialogue:
Entity /dev/7/4/AssetName doesn't know how to do PmdActionGETFILENAME
Where AssetName is the name of the folder that was uploaded as a bundled asset. Has anyone else had luck with this and I'm missing something obvious, or have I found a bug?
Many thanks,
Josh

Hi Josh,
I have the latest updates (10.5.6, 1.1.1, ProApps 2008-5) and yet I have this problem.
How did you manage to get a solutions for this?
To get things worse, if the Archive Device is a FTP Device it says it`s not supported archiving folders!!!!
How crazy can be that? Do you (or anybody else) know a workaround this?
I`m cracking my head for about 2 days for NOT compressing the directory bundle (zip, tar, ditto or anything - because I`ve ran into size problems and the uncompressions getting errors)?
Best Regards
Just an "update": I do still receive this error in FCSVR client, BUT checking the archive device the "bundle" is there under the /asset/number but I do not have the representation deleted and with the yellow archive. This is really strange!!! But then again, anyone know how to send to a FTP device?
A possible workaround would be to create a "temp" DEVICE (nor archive) send to there and with responses and stuff move to ftp archive and change the archive status (if possible). This could be a mess to "restore"... Any suggestions?
Thanks
Message was edited by: LucasSaldanhaWerneck

Similar Messages

  • Error Message:Destination is a Subfolder of an Existing Bundle Asset

    Hi all,
    Wondering why I am getting that error when I go to upload new assets into a subfolder on a certain device.... because its not (at least to my knowledge) part of a bundle asset.
    Any advice on how to fix this without having to dump the subfolder and reimport the assets?

    Nancy O and Bregent,
    Thanks so much for your help.  I think I figured it out.  You're both correct in stating the ideal filesystem configuration, but I think I found a workaround.
    I can define a DW site through "Manage Sites" for each school's folder.  Then, when I'm in that "site" it uses the site's template, not the one at the higher level.  What was messing me up before in trying this was that I have direct network access to the web server (I know, another bad idea I inherited), but when I mapped directly to the root directory of the server (as opposed to the directory holding all the website files), Dreamweaver protested mightily.  Once I mapped the drive to the directory holding all the website files, I could define my sub-sites in DW (one per school) and then manage each site with its local templates in the local Templates directory.  To ensure the top site (the district site) didn't propagate its Template changes into the school sites, I used the "Cloaking" feature of the DW file browser.
    Using Nancy's model here's what it looks like:
    1) put all templates for all schools & district into the root folder like this:
    mainsite.com/Templates/mainpages.dwt
    2) put sub-sites into their own hierarchy on your physical drive and separately defined in DW.
    mainsite.com/site1/Templates/mainpages.dwt
    mainsite.com/site2/Templates/mainpages.dwt
    mainsite.com/site3/Templates/mainpages.dwt
    This works, as long as I switch to the DW site that corresponds to the subsite (site1, site2, site3, etc...).  This is not ideal, but I fear making the whole set up "right" will result in lots of potential unforeseen problems.  I'm the CTO who is minimally maintaining the site until we get a replacement webmaster hired.  They will likely help rearchitect everything, so I'm just trying to keep the patient alive.
    But as I work through these issues, I am documenting as much as I can, since there has been zero documentation to date.
    Thanks for all your help!

  • You cannot post to asset 150000 0 (investment support measure)

    Hello All,
    I am getting Error while doing KO02 Order settlement
    I selected Cat - FXA and select asset (asset under construction)
    When I am trying to save
    You cannot post to asset 150000 0 (investment support measure)
    with Message Number Message no. AA311
    Regards,
    Kiran.

    Hi,
    You cannot directly include settlement rule for AUC. This is automatically included after settling.
    1. Create an Internal Order through KO01 and from that Extras --> Create AUC.
    2. Then you post expenses to AUC.
    3. You settle the IO through KO88. When you settle the internal order automatically it would be settled to AUC which is in IO.
    4. Check the IO you can see the settlement rule with AUC line item
    5. Now select FXA rule and select the final asset.
    This is will solve your problem and this is the procedure.
    Thanks & Regards,
    Giridhar Reddy

  • Have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. pl

    have Creative Cloud Subscription- Windows 7 ultima--16GB ram memory-Photoshop cc 2014 updated- I cannot find the Creative Cloud Libraries instead I get My Libraries that I have not created- I cannot find the Assets tab. Tried several links no solution. How can I get the Creative Cloud Market Library?

    kglad,
    Thanks for the suggestion but I have attempted this many times to no avail. As I said in my original post, "I have researched this problem on this forum and the Adobe site and believe that I have tried everything over the past week."
    It is very late here (I am in Greece). I will have a further attempt in the morning. The windows machine is hut down. Thanks for your help.
    Bob

  • Server Monitor error - "CANNOT LOAD BUNDLE ERR"

    I got 2 Xserve(s) intel based - 1 installed 10.6.8 and the other 10.5.8 - both server(s) are upto date on software updates.
    Server Monitor works fine on both of these server(s) when run locally (from the server). When I run the Server Monitor from my local machine (still in the same network), the server with 10.5.8 works fine, but the server with 10.6.8 shows the error "CANNOT LOAD BUNDLE ERR". I am not sure where I am making a mistake.
    Any help highly appreciated..:)
    Regards,
    -Raj.

    I'm having the same problem.  Were you able to fix it?
    Thanks

  • Clone from standby  ended in ARC: Cannot archive online log based on backup

    Hi
    I m into scenario where my prod db is in one data center and standby is in other data center.
    Both are geographically separated. I have to get a copy of prod on to standby data center side.
    Sending data over the network is taking long time either with duplicate db from active db or take backup and copy over standby side and restore it.
    so i thought of duplicate db from standby db which is in same data center, using 11g RMAN duplicate from active standby command.
    I have simulated scenario which is as below
    oracle version 11.2.0.1
    os version REHL 5.4
    My procedure & parameter are as below.
    on standby side from where i m copying (TARGET)
    1) on standby
    alter database recover managed standby db cancel;
    2)alter database convert to snapshot standby;
    which gave me
    /u01/data/DGSTD/archive/1_152_750425930.dbf
    /u01/data/DGSTD/archive/1_153_750425930.dbf
    */u01/data/DGSTD/archive/1_1_752604441.dbf*
    */u01/data/DGSTD/archive/1_2_752604441.dbf*
    3) alter database open;
    4) alter system switch logfile;
    now from rman
    RMAN> connect target sys/system@DGSTD
    connect auxiliary sys/system@GGR
    connected to target database: DGPRM (DBID=578436102)
    RMAN>
    connected to auxiliary database: NOTREAL (not mounted)
    RMAN>
    run{
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate channel prmy5 type disk;
    allocate auxiliary channel stby1 type disk;
    duplicate target database to ggr from active database
    spfile
    parameter_value_convert='DGSTD','GGR','/u01/data/DGSTD/','/u01/data/ggr/'
    set db_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
    set log_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
    set 'db_unique_name'='ggr'
    set 'audit_file_dest'='/u00/app/oracle/admin/ggr/adump'
    set 'sga_max_size'='140m'
    set 'pga_aggregate_target'='28940697'
    nofilenamecheck;
    and when output of rman reaches up below
    Starting backup at 31-MAY-11
    channel prmy1: starting datafile copy
    input datafile file number=00001 name=/u01/data/DGSTD/datafile/system01.dbf
    channel prmy2: starting datafile copy
    input datafile file number=00002 name=/u01/data/DGSTD/datafile/sysaux01.dbf
    in alert log of clone db it gives massive error saying
    ARC3: Cannot archive online log based on backup controlfile
    ARC2: Cannot archive online log based on backup controlfile
    ARC3: Cannot archive online log based on backup controlfile
    ARC2: Cannot archive online log based on backup controlfile
    and it fill up whole fs. and finally duplicate command throws error.
    not sure what i m missing of inside duplicate command or is it valid to duplicate database from snapshot standby.
    can somebody light on it please
    Edited by: user12281508 on Jun 1, 2011 10:26 AM
    Edited by: user12281508 on Jun 1, 2011 10:28 AM

    duplicate target database to ggr from active database
    spfile
    parameter_value_convert='DGSTD','GGR','/u01/data/DGSTD/','/u01/data/ggr/'
    set db_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
    set log_file_name_convert='/u01/oradata/DGSTD/','/u01/data/ggr/'
    set 'db_unique_name'='ggr'
    set 'audit_file_dest'='/u00/app/oracle/admin/ggr/adump'
    set 'sga_max_size'='140m'
    set 'pga_aggregate_target'='28940697'
    nofilenamecheck;
    }I think you should use standby cluase as
    DUPLICATE TARGET DATABASE TO dup1 FOR STANDBY FROM ACTIVE DATABASE;

  • Error: cannot find bundle file or key for resource type

    Hello,
    Please help in finding out the cause & resolving the below errors.
    Logs from the default trace:
    Error Log Message:  cannot find bundle file or key for resource type http://sap.com/xmlns/ciphotocomp, use fallback
    Error Location: com.sapportals.wcm.service.resourceTypeRegistry.ResourceType.getDescription( Locale )
    Thanks & Regards
    Maha,

    << Do not post the same question across a number of forums >>

  • I am a full Creative Cloud full member however I cannot download Market Assets

    I am a full member of Creative cloud (not a single app member) and I cannot download Market Assets. I receive an error message stating that it is a Premium Feature and I need to upgrade my membership.

    You have complete CC for students & teacher.
    You may refer to:
    Creative Cloud Help | Browse, sync, and manage assets
    Get started with Creative Cloud Assets | Adobe Creative Cloud Tutorials
    https://helpx.adobe.com/creative-cloud/how-to/access-creative-cloud-market-design-assets.h tml
    You can also contact Adobe Support for this.http://www.adobe.com/company/contact.html
    Regards
    Rajshree

  • Error : you cannot oost to asset in cocode abc4 fiscal year 2009

    Hi Guys,
    When i create and release a  purchase order for an asset, Then i go to MIGO, here i am geeting the nessage
    "YOU CANNOT POST TO ASSET IN COCODE ABC4 FISCAL YEAR 2009"
    the long text description shows" A Fiscal Year Change has not been performed in Asset Accounting for Cocode ABC4,
    Procedur: Check the Asset Value Date

    Moderator: double post, thread locked!

  • Archivation of asset subnumber object AM_ASSET

    Hi experts,
    I want to archive few subnumbers of asset. For example I have asset P09.08.011 subnumber 0 which have subnumbers 1 - 21.
    I want to archive asset subnumbers from 13 - 19. There is not amount in those subnumbers.
    I searched web, and I found some guides e.g . Data archiving in FIAA
    http://wiki.sdn.sap.com/wiki/display/ERPFI/DataArchivinginFI-+AA
    but when I tried to create write variant for archivation object AM_ASSET, I didn't found any possibility to enter asset subnumbers in archivation variant. I can only enter assets, but no subnumbers in test mode with archive file.
    Is there possibility to archive only few asset subnumbers ?
    Can I somehow copy archivation object AM_ASSET and somenow change this copy for my purpose?
    Please help me ...
    Thanks and regards,
    Adrian

    Hi Adrian,
    Looks like you are right - info structure AM_ASSET does not support archiving by asset subnumber.
    What you could do is a development to expand the info-structure to include sub-numbers.  I am not an expert in that; you may want to post something in the archiving forum under application lifecycle management.
    Good luck,
    Tammy

  • Archivation of  asset subnumber

    Hi experts,
    I want to archive few subnumbers of asset. For example I have asset P09.08.011 subnumber 0 which have subnumbers 1 - 21.
    I want to archive asset subnumbers from 13 - 19. There is not amount in those subnumbers.
    I searched web, and I found some guides e.g .  Data archiving in FIAA
                        http://wiki.sdn.sap.com/wiki/display/ERPFI/DataArchivinginFI-+AA
    but when I tried to create write variant for archivation object AM_ASSET, I didn't found any possibility to enter asset subnumbers in archivation variant. I can only enter assets, but no subnumbers in test mode with archive file.
    Is there possibility to archive only few asset subnumbers ?
    Please help me ...
    Thanks and regards,
    Adrian

    Hi Adrian,
    Looks like you are right - info structure AM_ASSET does not support archiving by asset subnumber.
    What you could do is a development to expand the info-structure to include sub-numbers.  I am not an expert in that; you may want to post something in the archiving forum under application lifecycle management.
    Good luck,
    Tammy

  • Cannot find Fixed Asset Log file

    I am trying to upload fixed assets with the fixed asset template.  I am getting errors.  I see on the forum that there is a fixed asset log file, but I cannot find it. 
    1) Is the log file on my computer or on the server?
    2) What is the location of the log file?
    Regards,
    Fred

    Gordon,
    I checked the directory where I uploaded the fixed asset file from and there was no log file.
    Regards,
    Wayne

  • Automate Archive of assets when production is "completed"

    I know this should be an easy one, but I can't seem to get it to work.
    If a production status is marked as "completed" I want all of the assets to automatically go to archive. Note that I'm not quite sure how an asset that is shared in multiple productions is going to handle this, but I can address that later.
    I've setup the the following:
    Watch: Metadata. If production status matches "completed" then -
    Email response & Archive Response to "archive" device
    That's it. I get the emails, but an archive never starts. Not even when the asset is only a part of a single production.
    Am I missing something? Thanks!

    Ok, seems it does not work for Productions or FCP Projects, only for individual assets. I have set up everything correct and the assets get archived.
    When you look at the shortcut menu of an FCP Project or a Prodcution, there is also no "archive" function.

  • MAMP + WordPress + xip.io: cannot get linked assets to load

    I managed to get Mamp Pro virtual host domains (example: http://mysite.dev) working with some help from the stackoverflow link above ( http://stackoverflow.com/questions/11546356/xip-io-with-mamp-pro-doesnt-work ), however I still cannot get things to work properly with local WordPress installs.  I get the same old issue of content loading, but linked assets (CSS, JS, images, etc) do not load. When I used to use http://localhost/ urls I got the same issue unless I set each WordPress install to use the machine’s IP address, which was annoying when working from different locations.  Now that I’ve set up virtual hosts and am using .dev domains, which I really like for a variety of reasons, I’m back to square 1, where Edge Inspect becomes useless.

    Hi Gabe, the heart of this issue is caused by a feature of Wordpress, not because of some issue with Edge Inspect. For some reason Wordpress refers refers to all linked assets with a full URL rather than a relative URL, and that causes a variety of problems including the one you're seeing.
    You should be able to work around this. It's not clear to me from your message above where you are in the process, so I'll just try to cover all the steps in a general way. Plus, this may help others trying to do the same thing:
    Your basic first step is that you have to get virtual hosts working in MAMP. That means, if you've setup actualgabe.dev as a virtual host, that without Edge Inspect or xip.io you should be able to type in (for example) http://actualgabe.dev/index.html into your browser and view a simple web page running on your machine.
    You've got to get Wordpress working with that virtual domain you've got set up. That means that all of the assets that Wordpress is referring to with a full URL should properly reference back to your machine and be viewable in your browser. Since Wordpress may refer to those assets with a localhost URL, you'll have to inspect the page to ensure that Wordpress is actually referencing the assets with your actualgabe.dev virtual host definition.
    Now make sure that MAMP, Wordpress, and xip.io all function correctly together without Edge Inspect involved. Assuming that you've got the actualgabe.dev virtual host configured as in steps one and two, then go ahead and take one of your devices and type in a URL of http://actualgabe.dev.<YOUR_MACHINE_IP_ADDRESS>.xip.io/index.html. So if the IP address of the computer you're hosting the site from is 10.0.0.1, you'd enter http://actualgabe.dev.10.0.0.1.xip.io/index.html. You should be able to see your local Wordpress site from your computer with all of it's associated local assets.
    Once you have those previous 3 steps working and fully tested, you should be able to start Edge Inspect, connect your devices up, and use that same URL from step 3 (e.g. http://actualgabe.dev.10.0.0.1.xip.io/index.html) in Chrome and see your Wordpress page and all of its assets.
    Let me know if you have any questions,
    Mark

  • Cannot Archive messages

    I am doing massive mailbox cleanup on behalf of all my users, mostly by moving large numbers of messages to newly created archives. I am moving messages in batches of 2000 or so at a time.
    One odd result is that in each batch there are some messages left behind that will not move to archive. I've seen this behavior while archiving messages for two different users so far. And the very strange thing is that for both of these users the messages that won't archive are always FROM the same internal user. However, most of the messages from that internal user DO archive normally.
    I've tried several times to re-archive the stubborn messages. They disappear for a moment and then re-appear with no error message. Other than they're always from the same user, there is no apparent pattern; some have attachments, some do not. Messages from that user which DO archive also have no apparent pattern.
    Any ideas about this one?
    Thanks,
    Peter Smick

    On 1/21/2011 12:06 AM, pgsmick wrote:
    >
    > I am doing massive mailbox cleanup on behalf of all my users, mostly by
    > moving large numbers of messages to newly created archives. I am moving
    > messages in batches of 2000 or so at a time.
    > One odd result is that in each batch there are some messages left
    > behind that will not move to archive. I've seen this behavior while
    > archiving messages for two different users so far. And the very strange
    > thing is that for both of these users the messages that won't archive
    > are always FROM the same internal user. However, most of the messages
    > from that internal user DO archive normally.
    Not weird. There's something stuck in the common msg db for it. No
    mystery as to the behavior, though what's wrong in msg db, I dunno.
    >
    > I've tried several times to re-archive the stubborn messages. They
    > disappear for a moment and then re-appear with no error message. Other
    > than they're always from the same user, there is no apparent pattern;
    > some have attachments, some do not. Messages from that user which DO
    > archive also have no apparent pattern.
    Think you have to open an SR. But I asssume you've looked at the
    verbose logs.
    >
    > Any ideas about this one?
    >
    > Thanks,
    > Peter Smick
    >
    >

Maybe you are looking for