Cannot authenticate via authless anonymous

We are encountering a strange pattern with our SRA installation. We have the Gateway installed on "gateway.company.com" and the portal,SRA,Netlet and rewriter proxy on "portal.company.com"
When we access "https://gateway.company.com" we come to a login page from amconsole and can use this page to authenticate and access our user specific page.
However, if we access the authless anonymous page using "https://gateway.company.com/http://portal.company.com/portal/dt"; and then we try to authenticate we are redirected to the amconsole login page. After entering the username password when we click submit here a "css" file is downloaded and open in the editor associated with that stylesheet file type. Once we click submit again we can login to the user specific page...
Please help ...

It seems like your css is protected by the gateway.
Make sure you have it in a public url.
(add it to "non authenticated url" list ot place it in /images)
Cheers,
Alex :-)

Similar Messages

  • SEEBURGER AS2: AS2 Adapter failure - Cannot authenticate the user

    Hello,
    All was working fine but now I got these errors in an AS2 scenario. Sending a message via AS2. Also we don't receive any messages via AS2 anymore. This is the error when sending a message:
    Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.
    MP: Exception caught with cause javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.
    Exception caught by adapter framework: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user
    Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Cannot authenticate the user.: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure.
    Please advice, many thanks!
    Erik

    Are you using the "Use Authentication" option in the communication channel? If yes, then ensure that the user provided is correct and is not locked. Also recheck the authentication certificate settings.
    Regards,
    Prateek

  • Cannot authenticate phone

    Suddenly my N95 stopped connecting with PS Suite via bluetooth. When trying to restart it I got the message that my phone could not be authenticated!!!???
    Bluetooth is working fine with other devices, PC suite is working fine through USB and trying to remove PC suite and installig the latest version currently available does not solve the problem. Please advise!!!
    Regards,
    Johan

    I have the same problem. My E51 connects with Bluetooth just fine to other devices like headset but when I try to connect to PC suite, it says 'cannot authenticate the phone'. I can connect the phone to my PC with my IBM supplied 'bluetooth places' but it connects for just a few seconds and then the phone disconnects it. The PC reports that the phone has connected and then disconnected and I can also see if from the phone (the little connection icon) that it is disconnecting so fast. Cable and IR work fine. Only the problem with BT. This has happened with the PC Suite that was delivered with the phone and also with the latest version. here's my setup info:
    PC Connectivity Solution:
    Version 8.15.0.0
    Nokia Connectivity Cable Driver:
    Version 6.86.11.0
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0
    - Mozilla Firefox 2.0 (Default browser)
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 2180)
    - Broadcomm (Version: 3.0.1, Build: 912)
    When I try to connect with PC suite it say I have WIDICOM Buletooth stack which will try to connect but the Microsoft stack will not work because it says I am missing drivers (I have yet to find out where I get them).
    Anyone know how to fix this?
    Rgds,
    RDWirr

  • Cannot authenticate bluetooth connection

    any help would be appreciated... got a 5310 phone 1 week n' several days ago... i tried connecting my phone to my pc using a bluetooth dongle v2.0... its a bluetooth device connected to the pc via usb... neway, phone and pc is paired but i cannot authenticate... a message "cannot authenticate phone" appears... pls help i am not really familiar about the "deeper" terms in computer but are familiar with the basic ones...
    thanks a lot!

    Sorry mate, i did get your PM but i haven't got a clue.
    Apologies.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • Cannot authenticate the phone : brand new 6085

    I have just bought a brand new 6085 and wish to connect via Bluetooth to my laprop ( full details below) . Depsite having a perfect working BlueTooth set up prior to installing PC Suite , I continually get the
    'Cannot authenticate the phone'
    error message after I have entered the passkey on the phone.
    I have spent about 6 hours checking all aspects of BT , which is otherwise working fine.
    What is going on? If I can't get a solution promptly, sadly this phone , which in theory is ideal for my needs, is going back to the shop.
    Thanks for your help,
    Operating system:
    Microsoft Windows XP
    Build 2600
    Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Locale: English
    Input language: English
    Nokia PC Suite:
    Version 6.84.10.4
    Language: English
    Connectivity Cable Drivers:
    Version 6.84.4.0
    PC Connectivity Solution:
    Version 7.22.7.1
    Microsoft Outlook:
    Version 11.0
    Build 8118
    Bluetooth stacks:
    WIDCOMM Bluetooth stack
    Version 5.0.1
    Build 1200
    Microsoft Bluetooth stack
    Version 5.1.2600
    Build 2180

    Cannot authenticate the phone same stupid problem (with settings). please help

  • "Cannot Authenticate the Phone" with IBM T60 and N...

    Hello!
    I've been reading through the various posts on the "cannot authenticate the phone" -issue, yet after uninstalling & installing BT stack & PC Suite various times my problem still persists. I've also followed every single piece of instruction I've found on uninstalling Microsoft BT stack, yet PC Suite still reports that it is available.
    I can connect from my laptop to the dial-up networking service on the phone, and I am able to connect from the phone to the headset service on my laptop, so BT stack & pairing works ok; I am also able to synchronise the phone via IR => problem must be somewhere in the PC Suite's bluetooth sections.
    Is there any flags to enable debugging level logs in PC Suite? I would SOOO MUCH like to see what the hell goes wrong in there.
    Or is there *any* way of getting this to work??
    Getting pretty tired with this..
    Rgrds,
    sakuvee.
    Operating system:
    Microsoft Windows XP
    Build 2600
    Service Pack 2
    Language: English (United States)
    Language for non-Unicode programs: English (United States)
    Locale: English (United States)
    Input language: Finnish
    Nokia PC Suite:
    Version 6.81.13.0
    Language: English
    Connectivity Cable Drivers:
    Version 6.81.1.2
    Microsoft Outlook:
    Version 11.0
    Build 8010
    Bluetooth stacks:
    Microsoft Bluetooth stack
    Version 5.1.2600.2180
    WIDCOMM Bluetooth stack
    Version 5.0.1
    Build 3200
    BT device: Thinkpad Bluetooth with Enhanced Data Rate
    BT firmware: Broadcom 2.1.92.108, HCI 2.0 206C, LMP 2.0 415C
    BT driver: Broadcom, 1.8.2006, 5.0.1.3200
    Phone: V 3.0617.0.6, 03-05-2006, RM-92, Nokia N80 (03)
    ---Message Edited by sakuvee on 19-Oct-2006
    02:46 PM

    OK - here's what I did to FINALLY get it working:
    1) Uninstall PC Suite (from Add Remove Programs)
    2) Uninstall Nokia Connectivity Solution
    3) Remove C:\Documents and Settings\[uid]\Application Data\Nokia, ...\\Application Data\[uid]\PC Suite, ...\All Users\Application Data\PC Suite, C:\Program Files\Common Files\Nokia, C:\Program Files\Nokia. Basically all Nokia directories left behind by Nokia uninstallers.
    4) Restart machine
    5) Run PC Suite Cleaner (all options one at a time, except the diagnostics, don't restart although it recommends to do so)
    6) Restart machine
    7) Manually clean all typelibs, activex-objects, device-ids and other registry entries linking to or containing Nokia related stuff from registry using regedit.exe
    8) Restart machine
    9) Install PC Suite
    10) Unpair phone (from laptop and from phone)
    11) Run Get Connected Wizard

  • Cannot connect via cable on Windows XP home SP2

    Good Afternoon,
    Maybe you can assist me here.
    I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
    In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
    The following is the steps I followed in both cases starting with XP Pro
    1. Installed Drivers
    2. Installed PC Suite
    3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
    XP Home
    Followed steps 1 + 2 in the same order
    3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
    At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
    I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
    Can you advise on what I can do.

    Hi
    Sounds lik ethe PC is having issues seeing it. Try this
    /discussions/board/message?board.id=pcsuite&message.id=11480
    Try this first:
    1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
    3. Select "PC Connectivity Solution", click "Change" and then "Repair".
    4. After Repair, restart PC
    music

  • Services won't allow users to authenticate via Open Directory

    Greetings! I have been pulling my hair out for a long time over this and wondering if anyone has seen something similar or has anything I can try.
    It's a bit confusing so I'll try to lay it out so it's not to crazy.
    *The setup:*
    Leopard server hosing services including Podcast Producer, AFP, SMB and iCal
    External OpenLDAP directory server
    *The problem:*
    I have setup our test Leopard server and got services all working. While this server is setup as an OD master I can authenticate and use the services without problem. However, we have an external LDAP server using OpenLDAP. If I try to authenticate with any of these users from the external ldap server they are not able to login on any service except afp!!!
    *What I've Done:*
    I've setup the server trying two methods: Magic triangle and augmented records. Both seem to yield the same thing. I can see the ldap users in workgroup manager and I can even nest them into groups on the local leopard ldap server. Some other possible info:
    A log entry in the Podcast producer log dealing with authentication:
    [error] [client xxx.xxx.11.122] moddigestapple: Unable to authenticate for URI "/podcastproducer/workflows" from user "testuser" for realm "PodcastProducer" at location "/LDAPv3/ldap.ourschool.edu" from the directory because user's password type is not compatible with digest authentication.
    If I edit /etc/smb.conf and delete the line : passdb backend = opendirectorysam guest windows users can successfully authenticate via smb.
    On our old Tiger server, we had a magic triangle setup. That machine only ran SMB and AFP and it experienced the same problem with SMB and needing to delete that line.
    I think these things may be related, but I'm not sure where to look next. Any help would be greatly appreciated! Thank you for any suggestions you can provide.
    Steve

    I've followed the apple kb articles for enabling WIKI access and Podcast Producer access. Users can now authenticate.

  • I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

    I have downloaded a music file through a downloader . But the file is not found in the captured in music player . How can I locate the physical location and move the file . I cannot do via itunes also .

    Exactly what do you mean by a 'downloader'?
    Thanks
    Pete

  • Samba Users Cannot Authenticate?

    I just want to start this thread by saying samba makes me want to kill myself. I love it so much, that it makes me want to rip my heart out and feed it to stray dogs every time I need to write a new configuration. Because I truly hate configuring it. Ok, with that steam having been blown off, let's jump into the problem I've been chasing for hours.
    My users cannot login to samba shares. Simple as dirt. Every single time I access the shares as a user, I am prompted for my password, I enter my password, and the prompt immediately asks me again, as if I've entered the wrong password.
    Heading off the obvious: Yes, I've added samba users with pdbedit -a -u [username]. The unix permissions on the folder I am trying to access as a samba user are 755, and I am trying to access the folder as its owner. My server smb.conf is included below.
    [global]
    workgroup = WORKGROUP
    passdb backend = tdbsam
    netbios name = ArchServ
    name resolve order = bcast host lmhosts wins
    server string = ""
    printing = cups
    printcap name = cups
    printcap cache time = 750
    cups options = raw
    use client driver = yes
    map to guest = Bad User
    local master = yes
    preferred master = yes
    os level = 65
    usershare allow guests = Yes
    usershare max shares = 100
    usershare owner only = False
    security = share
    #username map = /etc/samba/smbusers
    [printers]
    comment = All Printers
    path = /var/spool/samba
    create mask = 0700
    guest ok = Yes
    printable = Yes
    print ok = Yes
    browseable = No
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    [Home - user1]
    comment = Deyla's Home folder
    path = /home/user1
    create mask = 0755
    guest ok = yes
    browsable = yes
    write list = user1
    public = yes
    [Home - user2]
    comment = James' Home folder
    path = /home/user2
    create mask = 0755
    guest ok = yes
    browsable = yes
    write list = user2
    public = yes
    [Transmission Home]
    comment = Torrent downloads
    path = /home/transmission
    create mask = 0775
    guest ok = yes
    browsable = yes
    write list = user1 user2
    public = yes
    They work flawlessly as guest shares, and I have no problem gaining access... but when I try to log into a share as a user, the user will absolutely not authenticate, and it is the most frustrating, puzzling enigma to me. I formerly had this very samba configuration on an Ubuntu file server, and had no problems with the share behaving exactly as I wanted it to. I cannot for the life of me figure out why my users cannot authenticate.
    Please help! Any and all tips are appreciated! Thank you in advance!

    Thanks to Swerdina over at the OpenSUSE forums, I was able to solve my samba issue (thread). In a nutshell, my problem was the last active line in my [global] stanza, which was set to "security = share". By setting this global setting to "security = user" it fixed my problem and now allows me to invoke my shares with user privileges if I so choose to. Hopefully this helps someone who may have had a similar problem.

  • Javax.security.auth.login.LoginException: Cannot authenticate X509(Urgent!)

    I'm trying to sign my messages between client & webservice using X509 certificates. I've created a keystore and imported:
    privatekey1, certificate1(public key) and trustedCertAuthority that published certificates.
    I've configured webservice & client to use that keystore and privatekey1 to sign request/response, but web service keeps throwing following exception:
    javax.security.auth.login.LoginException: Cannot authenticate X509 certificate, User EMAILADDRESS=[email protected], CN=testUser, ... does not exist in our system
    How can I configure web service to find that certificate?
    Thnx for help.

    Yes, I did. I found the problem..
    I had also checked to Authenticate with X509 certificate... and obviously I should somehow set the Securtiy provider, although, I don't know how (but it's not so important right now).
    But I do have another question - how can I use private key & public key in certificate X509 to encrypt messages. In the sample you mentioned, it's written that there shoud be separate key for signature & encryption, but I have separate keystores for client (with client private key & server public certificate) and for server (with server private key & client certificate). But I can't get it to work... It seems to me that in that case signature key alias at service should be the same as key needed to decrypt the message?
    Am i missing something again?
    Thanks.

  • SOLVED: "AuthenticationSupport service missing. Cannot authenticate request."

    A customer was installing CQ5 on a Red Hat Linux environment, and getting the following error displaying in the browser.
    AuthenticationSupport service missing. Cannot authenticate request.
    We checked the Felix Console, and all bundles were installed correctly.
    We did however find the following message in the error log:
    20.06.2012 10:49:26.689 *ERROR* [FelixStartLevel] org.apache.jackrabbit.core.RepositoryImpl failed to start Repository: Unable to register data store in cluster. javax.jcr.RepositoryException: Unable to register data store in cluster.
    Caused by: java.net.UnknownHostException: {server name}: {server name}
    This was not a clustered instance.
    On closer inspection, the error was caused by an incorrect IP address entry for {server name} in the hostnames file
    Tim Goodman

    Hello Mkiti,
        I take a look there and my host file only contains comments :s
        Heres the content:
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    #      102.54.94.97     rhino.acme.com          # source server
    #       38.25.63.10     x.acme.com              # x client host
    # localhost name resolution is handled within DNS itself.
    #    127.0.0.1       localhost
    #    ::1             localhost
        The error only happen after I install the CQ5 update fix, from package share. I just renamed the crx-quickstart folder, the CQ create a new one and works, but my projects still in the old quickstart :s Is there a way to physically copy these projects, maybe?

  • Questions: cannot connect via wireless laptop (router WR...

    Questions:
    cannot connect via wireless laptop (router WRK54G)
    cannot secure my network using WEP

    from the wired computer , access the router using http://192.168.1.1 . the default password is admin
    on the router ui , click on the "wireless" tab , change the ssid - any non-linksys name , channel - 11 , ssid broadcast - enabled
    go to the "wireless security" subtab .. change the security mode to WEP - 64 bits , default transmit key - 1 , enter a 10 digit hexadecimal number in the WEP key 1 field , passphrase - empty
    under the "advanced wireless settings" , change the beacon interval - 50 , Fragmentation threshold - 2304 , RTS threshold - 2307

  • I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

    I have a large PDF that I cannot send via email because of its size, 76 MB. How do I shrink this file or convert it to another format so I can email this, less than 20MB? Thanks for your help

    Open the file in Preview and select "Save as..." from the File menu. Select "Reduce File Size" from the Quartz Filter menu and save. The size probably won't be reduced enough, though. You may have to split the file into several parts and mail them separately. Or upload it to a web server and send the link.

  • Error 413 Cannot Authenticate

    I have about 10 VPN clients connecting to a Cisco ASA 5510. I am getting calls that sometimes people are getting 413 errors here and there. When they out it username and password, the dialog box pops up again and then they get a error 413 cannot authenticate. Any ideas, they are IPsec tunnels which I hae 250 available.

    The easiest way to troubleshoot this would be to retrieve the debug information when the users fail to connect:
    debug cry isa 200
    debug cry ipsec 200
    Though you gotta be careful when you enable the debug, if you have many IPSEC tunnels running, the ASA may resent showing all the debug information.
    On release 8.0 there's a "debug crypto condition" command for you to choose only the debugs from the peer (you'll need to know the client's public address)
    I would also suggest to try to get more information on the error: is it happening for ALL the users? it's happening always from the same location: home, office, etc?
    Sometimes this "random" connection issues are related to delay/problems with the client's internet connection.
    Regards,

Maybe you are looking for