Cannot backup in PSE 9  'error encountered while writing file(s)'.

Cannot backup either full or incremental in PSE 9 'error encountered while writing file(s)'.
I've not had any problem on this machine (MacbPro) to my ext hdrive previously, plenty of space.
Any ideas?
Doesn't look as if files are corrupted.

Sorted! Faulty usb lead.

Similar Messages

  • How do i fix this error encountered while writing files. User/deanbullock/library/applications/support/adobe/elementsorganizer/catalog/mycatolog/c atalog.pse11db?

    Please help i can't backup my files and this error does not help me solve the problem. i stated the error in the question please any help would be appreciated

    Hi,
    Do you have video files in your catalog?
    If yes, can you please try taking the backing without these video files?
    Thanks,
    Anwesha

  • Installer "error encountered while writing receipt"

    I'm running off 10.4.10, and have been trying to install updates for months now, unsuccessfully. When I try to install off of the automatic updating system, it simply tells me the installation has failed and to try again later. When I download updates seperately and check the log, I find that there was an "error encountered while writing receipt". There is no respective receipt in the Receipts folder. I've tried installing right after a reboot, repairing disk permissions, and searching through support help for hours.
    Also, I'm not sure if this is related or not, but iTunes has gone blank after starting up a few times over the past several months, telling me that the Library is damaged.
    Please help!
    Thanks,
    AMC

    HI AMC20 and welcome to Apple Discussions ...
    Let's take this one issue at a time.
    Locate this file: com.apple.SoftwareUpdate.plist It's here: /Users/YourName/Library/Preferences. Drag that file from the preferences folder to the trash, empty the trash and reboot. Go to the Apple logo top left in your Desktop and then click Software Update. If Software Update fails... we need to go further.
    See how much available drive space there is. Select your MacintoshHD icon on your Desktop, then Command + I, which will prompt the Get Info window. Click the General tab so the arrow faces down. Look where it says; Available and Capacity Try not to allow your available drive space to fall below 15% of the capacity. Software Update cannot download and update software without enough space.
    As for iTunes... go here to learn how to recreate your iTunes Library:
    http://support.apple.com/kb/HT1451 < recreate iTunes Library
    If you continue to have problems, you might want to do an Archive & Install or Erase & Install:
    Reinstalling Mac OS X
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    Click Options. If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings." If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
    Click Continue.
    Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
    If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
    For more information, visit the Mac OS X Install and Upgrade Support website at www.apple.com/support/tiger/install/.
    Carolyn

  • HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

    My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

  • Error Warning that Time Machine couldn't complete the backup to disk, an error occurred while copying files.

    I've been getting this warning on my MBA for the last week: "Time Machine couldn’t complete the backup to “LaCie-2big-NAS.” an error occurred while copying files. The problem may be temporary. If the problem persists, us Disk Utility to repair your backup disk."
    I have MBA and iMac, both running Maverick (10.9.4), backed up to LaCie NAS. However, when I go to Disk Utility on the MBA and the iMac, the LaCie does not appear and thus can't be selected to run repair. The iMac seems to be backing up to LaCie without problem. And even seems that MBA is backing up sometimes; when I check Time Machine, I can find files added in the last couple of days.
    Is this a real problem? What's fix?
    Thanks

    You can't repair a network volume in Disk Utility.
    Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
    If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.)

  • Back-up: error encounted whilst writing files - How do I fix?

    I am running Photoshop Elements 10 on windows 7 (32bit). (I've installed using disk 1, not disk 2 as I'm not running 64 bit). I have imported photographs my catalogue has 1087 photographs (no video). I am trying to do my first full back-up. It tells me that the size is 30mb. (I've got 225GB free on my hard drive). It calculates the size of the back up, lets me select the destination files, tells me to wait whilst it prepares the back-up file and then I get the following message
    It then just reverts to PSE organiser.
    I have uninstalled and re-installed and it has made no difference.
    Can anyone tell me how to fix please?

    white feathers 1939 wrote:
    do you think the software could be faulty?
    No, the software works elsewhere for backups, and on your computer the software also works -- that error message means that there's a problem with one (or more) of the image files, or accessing the backup location for writing.
    I'm out of ideas, except for the rather vague suggestion of checking the Read/Write privileges on the directories and filles.
    Ken

  • 2 error msgs while synching to I-pod touch.  "An error occurred while writing to the device.  Also, I-pod cann be synced, required disk cannot be found.

    Two error messages appear while trying to synch to I-pod touch.  "I-pod cannot be synced.  An error occurred while writing to the device."  Second msg:  I-pod cannot be synced, required disk cannot be found." 

    The latter error can usually be resolved by deleting the iPod Photo Cache folder.  See the following for its location.
    iTunes: Photo sync creates iPod Photo Cache folder
    For the former error, I would try again.  Then I would reset the iPod and try again.
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next I would restore the iPod.

  • A Critical error encountered while loading webpage.

    Was running 2.1.51  and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
    A Critical error encountered while loading webpage.
    Reboot router - log back in - can go anywhere except the status page -- get same error page
    made the mistake of downloading and upgrading firmware to 2.1.71   = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
    A Critical error encountered while loading webpage.
    the url is https://192.168.75.1/scgi-bin/platform.cgi   but it doesn't load only displays the error.
    could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
    thanks.

    Thanks for the response.   Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box.  Luckily I had a backup of the config so it wasn't too painful to restore.
    I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
    For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired...  I had successfully logged in without issue and was able to view the status tab only a week earlier.
    be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned...

  • Time Machine will not complete a system backup and terminates with "Unable to complete backup. An error occurred while copying files to the backup volume.  This follows a problem when Time machne terminated when the volume was almost full.

    On 11/1/2011, Time Machine (TM) terminated with an error message I did not record.  I noted that the drive was full and decided to do a separate complete bootable  system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean.  Part way through the full system backup CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16".  That was about the time that TM malfunctioned, so I assumed they were related.  After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours.  I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume.  I also erased and reformatted the TM volume.  However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume".  I restarted the computer with no change in results.  Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup.  I ran Techtool and no problems were found.
    I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive.  My hard drive is only about half full at 246 GB.  My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
    I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours.  I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination.  As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty.  As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing.  Now my question would have to be - what could possiibly have happened to make it perform this way?   It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.

    jcm21 wrote:
    CCC put up a message that there was a Physical Problem  "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
    You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
    "Unable to complete backup. An error occurred while copying files to the backup volume".
    One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like).  See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
    If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem);  and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.

  • The backup was not performed because an error occurred while copying files

    One Time Capsule, Two MacBook's, OS10.6.6
    One MacBook can backup no problem, The other cannot backup says: the backup was not performed because an error occurred while copying files to the backup disk.
    Using a Time Machine Buddy widget gives:
    Starting standard backup
    Attempting to mount network destination using URL: afp://Rachel%[email protected]/Data
    Mounted network destination using URL: afp://Rachel%[email protected]/Data
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/Data/Rachel Feuchtwang’s MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    No pre-backup thinning needed: 4.70 GB requested (including padding), 721.52 GB available
    Indexing a file failed. Returned 200 for: /Applications/Dashboard.app, /Volumes/Time Machine Backups/Backups.backupdb/Rachel Feuchtwang’s MacBook/2011-01-12-115852.inProgress/F82EB140-616F-4213-9B4A-072C2C98B556/MAC/A pplications/Dashboard.app
    Aborting backup because indexing a file failed.
    Stopping backup.
    Copied 5 files (84 bytes) from volume MAC.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image.
    Ejected Time Machine network volume.
    Who would be so kind to point me in the direction to make thsi work again?
    Thanks! Hugo

    This could very well have to do with ACLs.
    I bumped into the same problem:
    5/8/11 10:43:22 PM          com.apple.backupd[7126]          Error: (-41) SrcErr:NO Copying /Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib/classes.nib to /Volumes/Local Backup/Backups.backupdb/Server/2011-05-08-221524.inProgress/88ACE716-0660-44C8- A128-CF01046FC2F8/Macintosh HD/Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib
    Using DD or CCC is no option for me, I don't want downtime and I want incremental backups. So I started to investigate.
    I repartitioned my external Time Machine drive, did the backup again. It didn't work. Then I blocked the culprit file mentioned in the logs from being backed up with TM. That helped, only to find that a bit later it found another file with issues.
    So i looked at the files an found they had ACLs on them that somehow prevented them from being copied.
    SOLUTION:
    remove the ACL from the file.
    If you want to remove all ACLs in a directory, use Terminal and navigate to that directory. Then issue this command:
    sudo echo | sudo chmod -R -E ./*
    If you would like to remove ACLs from a single file or package (e.g. an application), issue this:
    sudo echo | sudo chmod -R -E <nameoffile>
    You might have to this several times since there might be multiple files affected. Unlike previous solutions, this one does not require you to delete the file.
    I got the command to remove ACLs from http://osxadmin.blogspot.com/2008/01/chmod-acl-removal.html

  • Error encountered while communicating with primary IP-address

    Hi
    I have recently deployed my first Exchange Server. This is an Exchange Server 2013 Standard and I set up everything using this document on Technet for installation: http://technet.microsoft.com/en-us/library/bb124778(v=exchg.150).aspx
    For post-installation I used this document on Technet: http://technet.microsoft.com/en-us/library/bb124397(v=exchg.150).aspx
    I have setup access to port 25, 587, 143, 993, 110, 995, 80, 443 in my routers SPI-firewall and created DNAT rules for each of these ports as well. I can send mail without any issues, but I cannot receive. Reverse DNS is working both internally and externally.
    I can telnet to port 25 on my external IP and external domain which is exchange.mydomain.tld
    My Exchange-server is running inside a Gen1 Hyper-V virtual machine on a Windows Server 2012 R2.
    My Exchange Server has the following resources:
    OS: Windows Server 2012 R2
    CPU: 2 cores of AMD FX-6120 3.30GHz
    RAM: 3584MB
    HDD1: IDE 80GB VHDX - is currently used for all system files and for Exchange.
    HDD2: SCSI 127GB VHDX - will be used for Exchange DB and logs when everything is working.
    When sending mail from any internal or external e-mail address to an internal e-mail address I get the following error in Exchange Queue Viewer:
    "451 4.4.0 Error encountered while communicating with primary target IP address:"421 4.2.1 Unable to connect." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate
    hosts. The Last"
    How can I solve this issue? If you need any more information please let me know and I will see if I can find it.

    Hi I have now tried to send mail to an internal address using telnet. This returned the following value:
    250 2.6.0 <[email protected]> [InternalId=1971389988866] Queued mail for delivery
    Next I tried to send to an external mail by using telnet and it returned this result when adding the reciepient:
    550 5.7.1 Unable to relay
    This is the output of the Test-Servicehealth cmdlet:
    Role                    : Mailbox Server Role
    RequiredServicesRunning : True
    ServicesRunning         : {IISAdmin, MSExchangeADTopology, MSExchangeDelivery, MSExchangeIS, MSExchangeMailboxAssistant
                              s, MSExchangeRepl, MSExchangeRPC, MSExchangeServiceHost, MSExchangeSubmission, MSExchangeThro
                              ttling, MSExchangeTransportLogSearch, W3Svc, WinRM}
    ServicesNotRunning      : {}
    Role                    : Client Access Server Role
    RequiredServicesRunning : True
    ServicesRunning         : {IISAdmin, MSExchangeADTopology, MSExchangeMailboxReplication, MSExchangeRPC, MSExchangeServi
                              ceHost, W3Svc, WinRM}
    ServicesNotRunning      : {}
    Role                    : Unified Messaging Server Role
    RequiredServicesRunning : True
    ServicesRunning         : {IISAdmin, MSExchangeADTopology, MSExchangeServiceHost, MSExchangeUM, W3Svc, WinRM}
    ServicesNotRunning      : {}
    Role                    : Hub Transport Server Role
    RequiredServicesRunning : True
    ServicesRunning         : {IISAdmin, MSExchangeADTopology, MSExchangeEdgeSync, MSExchangeServiceHost, MSExchangeTranspo
                              rt, MSExchangeTransportLogSearch, W3Svc, WinRM}
    ServicesNotRunning      : {}
    Can we use this information to find a possible source for my issues?

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Error encountered while executing the transform

    My message failed at orchestration with the following error. Kindly help in finding the issue.
    xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
    Shape name: CodecoMapping
    ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
    Exception thrown from: segment 1, progress 22
    Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
    Exception type: XTransformationFailureException
    Source: Microsoft.XLANGs.Engine
    Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
    The following is a stack trace that identifies the location where the exception occured
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
       at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
       at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
       at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
    Additional error information:
            Exception has been thrown by the target of an invocation.
    Exception type: TargetInvocationException
    Source: mscorlib
    Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
    The following is a stack trace that identifies the location where the exception occured
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
    Additional error information:
            Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
    Exception type: XslTransformException
    Source: System.Data.SqlXml
    Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
    The following is a stack trace that identifies the location where the exception occured
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
       at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
    String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
       at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
       at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

    Hi,
    It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
    "Exception has been thrown by the target of an invocation" is a very generic exception. you
    need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
    http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Error encountered while BER decoding Digital Signatures

    Hello -
    I work for a GOV agency and we use Common Access Cards/Smart Cards to login to our PC's and we subsequently use them to digitally sign PDF documents.
    We have just recently switched to Adobe Acrobat 9.x Pro.  Before this, we had Adobe 7.x Pro and had no troubles digitally signing documents, clearing those digital signature to reuse old documents, etc.
    We first got Acrobat 9.x and had issues with digital signatures right away.  We had to import this into the registry, which I believe I found on adobe forum.
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096]
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker]
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURL]
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURL\c0]
    "sValue"=hex:68,74,74,70,3a,2f,2f,6f,63,73,70,2e,64,69,73,61,2e,6d,69,6c,00
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURLToConsult]
    [HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cASPKI\cASPKI\cCustomCertPrefs\c4974BB0C5EBA7AFE0254EF7BA0C695C60980 7096\cAdobe_OCSPRevChecker\cURLToConsult\c0]
    "iValue"=dword:00000001
    Lately we've had trouble verifying signatures.  Once we sign a document and then click the signature, we get the attached error.
    Error during signature verification
    Error encountered while validating
    Error encountered while BER decoding
    When we started to notice this we were on Acrobat 9.2.  I think we may have went from 9.0 to 9.1.3 and then to 9.2 pretty quick.  I removed it and installed our base load of Acrobat 9.0 and everything was working fine.  I then updated to 9.1, 9.1.1, 9.1.2, 9.1.3 and none of them worked or fixed the issue.  We have recently approved the update to 9.3, but that didn't fix it either.  Because of this BER decoding issue, we cannot right click the signature field and clear a signature as well.  Even after updates I could clear a signature field signed under Adobe 9.0.
    Adobe, what should I do?  Do we have a problem elsewhere, outside of Acrobat?
    Again, we use smart card's to sign the documents, thus cannot change certificates.
    Thanks,  Nick

    Hi Nick,
    When you mentioned that upgrading to 9.3 didn't fix the problem, did you mean when creating a new signature in Acrobat/Reader 9.3 or did you mean opening a previously signed file and doing the signature verification?
    If you meant the later, no version of Acrobat will be able to decode the signature if it was created incorrectly, which is what I fear you are referring to. What happened was Acrobat 9.0 changed the default digest method from the older SHA-1 to the the new SHA-256, but if the device that encrypts the digest (the actual signing operation) cannot handle the larger digest Acrobat is supposed to fall back to the older, smaller SHA-1 digest. There was a bug where Acrobat wasn't re-computing the digest if the smart card couldn't handle SHA-256 and creating a corrupt signature. Once this corrupt signature is written out to the PDF file there is no getting around it. Update 9.3 fixes the problem at signature creation and you should be able to successfully sign using your CAC card, but sadly there is no fixing the existing corrupt signatures.
    Steve

  • App-V 5: Error encountered while executing command Mount-AppvClientPackage

    I am getting this error in which no Google search reveals anyone else as having reported it anywhere.  In fact, after having posted this, it was the only search result that came up with either of these two event ID's or errors.
    I am trying to sequence an in house application. It's a manual install. The application runs perfectly prior to creating the package so I am not sure what this "specified file" is that it can't find.  It says to refer to the AppV Client Event
    Log for more details. This event was *IN* the AppV Client Event Log and there was another event along side it.
    Event ID 9001
    Error encountered while executing command Mount-AppvClientPackage -PackageId eb77be98-bc44-45fd-a0e5-95e0c315808b -VersionId c5013ec7-0456-401b-b99e-d988d97bfa55. Error: Application Virtualization Service failed to complete requested operation. 
    Operation attempted: Mount Package. 
    Windows Error: 0x80070002 - The system cannot find the file specified
    Error module: Streaming Manager. Internal error detail: 74F0262C80070002. 
    Please consult AppV Client Event Log for more details.
    Event ID 14016
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    The network connection is still quite alive on the client and the firewall is disabled on the App-V server. I can still reach and view the xml file when browsing to the web service on the App-V server.  I can also run Sync-AppVPublishingServer from
    powershell without error.
    For more inside info on the app: 
    1. It is a manual install. A directory is simply copied to the hard drive manually.
    2. An ocx file gets registered from the Syswow64 directory.
    3. MySQL 5.1.13 client is installed.
    4. Shortcuts are created.
    5. A system DSN is created using C:\Windows\SysWOW64\odbcad32.exe
    6. The app runs perfectly on the sequencer prior to creating and publishing.
    UPDATE:
    Get-AppVClientPackage reveals this:
    PackageId            : eb77be98-bc44-45fd-a0e5-95e0c315808b
    VersionId            : c5013ec7-0456-401b-b99e-d988d97bfa55
    Name                 : Tietan
    Version              : 0.0.0.1
    Path                 : \\wuspappv01\appv1\TietanProd\Tietan.appv
    IsPublishedToUser    : True
    UserPending          : False
    IsPublishedGlobally  : False
    GlobalPending        : False
    InUse                : False
    InUseByCurrentUser   : False
    PackageSize          : 217155655
    PercentLoaded        : 0
    IsLoading            : False
    HasAssetIntelligence : True
    The path is accessible from the client server. I can see the file. It's there.

    Hello,
    If you execute get-appvclientpackage
    And then check what is the value for Path for the package you have an issue with.
    Most likely the error message means that the file in Path isn't reachable.
    As indicated here;
    The package {eb77be98-bc44-45fd-a0e5-95e0c315808b}
    version {c5013ec7-0456-401b-b99e-d988d97bfa55} could not be mounted
    because the network connection has been lost or is unavailable.  Check your network connection and try again.
    Nicke Källén | The Knack| Twitter:
    @Znackattack

Maybe you are looking for

  • Creative Cloud won't sync with my Libraries

    I'v reinstalled the latest Creative Cloud desktop app, and updated to the latest version of Photoshop CC 2014 - but I cannot get Creative Cloud to show me any of my assets (libraries) on the website. To troubleshoot in Creative Cloud preferences : 1.

  • Not able to highlight text. Help please?

    Hi I am trying to build a tool which is going to be used to to load an html book and the make some notes on it. Now I am trying to highlight. I am in thye very beginning so I just try to highlight a small part from the begginig not the user, this is

  • Why does PDF substitute characters when placed in Illustrator CS4?

    When trying to place a PDF (x1a) Table into my illustrator file, it substitutes different characters. My hyphens and Quotation marks become latin and cyrillic substitutes. Even when I've outlined all fonts within the table before exporting to PDF x1a

  • Adding date field in cv01n very urgent

    hye all,               can plz anybody send any document or any screen shot or link for adding date field in cv01n(dms). mail id      [email protected] thanks.

  • Wise authorizarion to user in easy DMS

    Dear all, Is it possible to giving the folder  wise authorizarion to user in easy DMS ? if yes plz let me know Rgds