Cannot be converted in type DEC,CURR - longtext
Dear,
When we are loading the data to the targets, we are getting the errors in the Transfer rules like mentioned bellow
Info source 0EC_CS_1 (Transaction Data for Consolidation)
Status (tab) :
Technical : Collection in source system ended
Processing Step : Processing End
Details (tab):
Processing end : Errors occurred
Error records written to application log
Error in an arithmetic operation in record 1
Record 1 :Contents 00 0.0000000 from field PCNT1 cannot be converted in type DEC ->longtext
Info source 0CO_OM_CCA_9 (Cost Centers: Actual Costs with Delta E)
Record 39952:Contents 048624.95- 1 from field SWF cannot be converted in type CURR ->longtext
Kindly help.
Thanks & Regards,
Kiran A
Edited by: Kiran A on Mar 21, 2010 10:23 AM
Edited by: Kiran A on Mar 21, 2010 11:36 AM
Hi,
It is sure some where in transferrules the mapping wasdone wrongly , like char --char of info object but in ur case some where data element is not same for field and info object.
check throughly transfer rules correctly field level and infoobject mapping and activate.
it is some where currency and unit fields the difference is there for data elements
Thanks&Regards,
Sathish
Edited by: sathish kakumudi on Mar 21, 2010 4:01 PM
Similar Messages
-
Field UMSA1 cannot be converted in type CURR - long Text
Hi All,
I am getting the following error
Error records written to application log
Error in an arithmetic operation in record 489
Record 489:Contents 四川省长江滥曝扇备总 from field UMSA1 cannot
Record 489 :Contents 四川省长江滥曝扇备总 from field UMSA1 cannot be converted in type CURR ->lo
This happened for the customized master data Z********(customer number). Data source; 0CUSTOMER_ATTR
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
Out of 5 data packages, I could find only 3 data packages in PSA which are successful, the remaining had error and could not be found in PSA. Checked in R/3 but could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
The UMSA1 field in data source 0CUSTOMER_ATTR in BW.
Data Type: CURR, Length: 15, Decimal: 2, curr/unit: UWAER
The UMSA1 field in R/3
Data Type: CURR, Length: 15, Decimal: 2
Request your timely suggestions.
RajDear Veerandra,
I have already checked in R/3 as you had mentioned. But as I said earlier, could not catch the correct record, since, did not had proper info. UMSA1 refers to Annual Sales, which are empty in R/3 and BW as well.
I have undertaken the following actions but all failed.
1. Replicated the data source, activated the transfer structure through a program and the load was run but the load failed with the same issue.
2. Pushed the data till PSA and tried to edit it in the PSA, but here too the load failed with the same issue.
It is understood that the data source 0CUSTOMER_ATTR is obtained from the Funtion Module: MDEX_CUSTOMER_MD
3. Error Handling option.
Regards.
Raj -
Re:Contents L001 from field /BIC/NTrtc cannot be converted in type QUAN
Hi ,
When loading from Flat file I am getting the following error in the developement.
Message no. RSAR198
Diagnosis
The value 'L001' from field /BIC/NTrtc cannot be converted into the DDIC data type QUAN of the InfoObject in data record 1. The field content could not be transferred into the communication structure format.
System response
The data to be loaded has a data error or field /BIC/NTrtc of the transfer structure is mapped to an unsuitable InfoObject.
The conversion of the transfer structure into the communication structure was cancelled. The processing of data records with errors was continued with respect to the settings in the error handling of the InfoPackage (Tab Page: Update Parameters).
Please suggest some the resolution.
Thanks and Regards,
Ravi.
Assigning points is the way to say thanks in SDN.
Edited by: Ravi Bw on Dec 21, 2007 1:45 PM
Edited by: Ravi Bw on Dec 21, 2007 1:53 PM
Edited by: Ravi Bw on Dec 21, 2007 2:41 PMcan you please answer some one this is very imporant for me..
Siri -
Hello,
I'm having a problem when I try to load the WSDL file for the "Invoke Web Service" activity.
I'm trying to create a connection between Orchestrator 2012 R2 and Cisco Unified CM through a Web Services. When I click the WSDL file and I click the "Format Hint" button appears the following error "Object of type 'System.Int32' can not be
converted to type 'System.UInt64'."
The WSDL file that Cisco Unified CM I exported another work tools, tested and working well. In Orchestrator just gives the error.
Can anyone help with this?
Thank you
RuiHi,
You're going to have to use Get-AzureVM to get your specific VM object and then pipe it into Add-AzureDataDisk. See the examples here:
http://msdn.microsoft.com/en-us/library/windowsazure/dn495298.aspx
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
Calculation between type DEC & CURR
data l_dmbtr type dmbtr. " curr 13 2
data l_dec type zdec. " dec 12 6
l_dec = '10.000000'.
l_dmbtr = 10000 * l_dec.
in program, the L_dmbtr get value '100000.00',
but in OO context, l_dmbtr get value '1000000000.00'.
could someone give me some link to explain the calculation of the DEC and CURR?
and is there the problem of OO context?Hi,
Fixed point arithmetic
If you mark this checkbox, all calculations in the program will use fixed point arithmetic.
If you do not, packed numbers (ABAP/4 type P, Dictionary types CURR, DEC or QUAN) will be treated as integers when they are used in assignments, comparisons, and calculations, irrespective of the number of decimal places defined. Intermediate results in arithmetic calculations will also be rounded to the next whole number. The number of decimal places defined is only taken into account when you output the answer using the WRITE statement.
Regards,
Gaurav -
Hi All,
I am reading notepads files and inserting data in sql tables from the notepad-
while performing sql bulk copy on this line it throws exception - "bulkcopy.WriteToServer(dt); -"data type related(mentioned in subject )".
Please go through my logic and tell me what to change to avoid this error -
public void Main()
Dts.TaskResult = (int)ScriptResults.Success;
string[] filePaths = Directory.GetFiles(@"C:\Users\jainruc\Desktop\Sudhanshu\master_db\Archive\test\content_insert\");
for (int k = 0; k < filePaths.Length; k++)
string[] lines = System.IO.File.ReadAllLines(filePaths[k]);
//table name needs to extract after = sign
string[] pathArr = filePaths[0].Split('\\');
string tablename = pathArr[9].Split('.')[0];
DataTable dt = new DataTable(tablename);
|
string[] arrColumns = lines[1].Split(new char[] { '|' });
foreach (string col in arrColumns)
dt.Columns.Add(col);
for (int i = 2; i < lines.Length; i++)
string[] columnsvals = lines[i].Split(new char[] { '|' });
DataRow dr = dt.NewRow();
for (int j = 0; j < columnsvals.Length; j++)
//Console.Write(columnsvals[j]);
if (string.IsNullOrEmpty(columnsvals[j]))
dr[j] = DBNull.Value;
else
dr[j] = columnsvals[j];
dt.Rows.Add(dr);
SqlConnection conn = new SqlConnection();
conn.ConnectionString = "Data Source=UI3DATS009X;" + "Initial Catalog=BHI_CSP_DB;" + "User Id=sa;" + "Password=3pp$erv1ce$4";
conn.Open();
SqlBulkCopy bulkcopy = new SqlBulkCopy(conn);
bulkcopy.DestinationTableName = dt.TableName;
bulkcopy.WriteToServer(dt);
conn.Close();
Issue 1:-
I am reading notepad: getting all column and values in my data table now while inserting for date and time or integer field i need to do explicit conversion how to write for specific column before bulkcopy.WriteToServer(dt);
Issue 2:- Notepad does not contains all columns nor in specific sequence in that case i can add few column ehich i am doing now but the issue is now data table will add my columns + notepad columns and while inserting how to assign in perticular colums?
sudhanshu sharma Do good and cast it into river :)Hi,
I think you'll have to do an explicit column mapping if they are not in exact sequence in both source and destination.
Have a look at this link:
https://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlbulkcopycolumnmapping(v=vs.110).aspx
Good Luck!
Kaur.
Please mark as answer if this resolves your issue. -
Record 1 :Contents PC from field G_UABSMG cannot be converted in
Hi Experts,
When iam trying to load transaction data i'm gettting fallowing error.
Pls suggest.
Record 1 :Record 1 :Contents PC from field G_UABSMG cannot be converted in type QUAN ->longtext.
Sirican you please answer some one this is very imporant for me..
Siri -
Error: /BIC/ZPROP_REM cannot be convertedin type DEC
Hi All,
I am loading data from a flatfile, I am able to see Data coming in preview, but when I schedule its shooting an error message,
Record 1:ContentsProperties Remedi from field /BIC/ZPROP_REM cannot be convertedin type DEC ->longtext
Message no. RSAR198
Diagnosis
The value 'Properties Remedi' from field /BIC/ZPROP_REM cannot be converted into the DDIC data type DEC of the InfoObject in data record 1. The field contentcould not be transferred into the communication structure format.
System response
The data to be loaded has a data error or field /BIC/ZPROP_REM of the transfer structure is mapped to an unsuitable InfoObject.
The conversion of the transfer structure into the communication structure was cancelled. The processing of data records with errors was continued with respect to the settings in the error handling of the InfoPackage (Tab Page: Update Parameters).
Not able to find the solution..
Please help in resolving this,
Thanks in Advance,
SaiHi Kapadia,
thanks for ur immedaite reply,
As I am loading flatfile, the transfer rule assignment will be generated automatically when we aiisgn datas source,
moreover its a keyfigure which is in DEC format..
please explain me where I am going wrong..
Thanks,
Sai -
Cannot convert ÿØÿà of type class java.lang.String to class BFileDomain.
Hi All,
I am using Jdeveloper 11.1.2.3.0.
I have a scenario of making an ADF page where I have a IMAGE field to show on the page. So,I have a table called "PRODUCT" with fields called photo with BFILE type. Now when I the data i have inserted using the DML command and i can see the path at the backend.
However,when i am runnig my ADF page in the Filed called "PHOTO" I can only see a junk character stating 'yoyo'.
When I click on it, it says ERROR "Cannot convert ÿØÿà of type class java.lang.String to class oracle.jbo.domain.BFileDomain".
Your help will be appreciated ASAP.
Regards,
ShahnawazHi,
did you show the id-value in the user interface as a input-component, and did the input-component include a converter?
If yes, show the id as output-text and remove any existing converter-components.
Best Regards -
BAdI error : type of EXIT_REF1 cannot be converted to the type of EXIT_REF
Hi all,
The below was the posted earlier for BAdI. Ihave followed all the steps. And i have written the below code. Syntactically it is not showing any errors, but when i am activating i am getting error
like " The type of EXIT_REF1 cannot be converted to the type of EXIT_REF". where i am doing the mistake..??
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref. "" The type of EXIT_REF1 cannot be converted to the type of EXIT_REF"
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Thanks in advance
krupali.Hi,
Both are of different types
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
Assiging one type another type is not allowed.
Rhea. -
Function module to convert float value to data type 'dec'
Hi experts,
In a report i need to convert float value to the data type 'DEC'. How to convert it. Is there any function module for this conversion.
Thanks and Regards,
Vaibhav Tiwari.Hi ..
We can do like this...
Data : V_float type F value '12345.67'.
Data: V_dec type P Decimals 2.
Write:/ V_float exponent 0. "This will display it like Type P
or
Write V_float to V_dec EXPONENT 0.
Write:/ V_dec.
reward if Helpful.
<b></b> -
Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)
I am getting the above error in c#. Please help me. Thanks in advance
public IDataReader ExecuteReader(CommandBehavior behavior)
string query = "select * from Sales.Store";
SqlConnection readerconn = new SqlConnection("Data Source=localhost;Initial Catalog=AdventureWorks2000;Integrated Security=SSPI");
SqlCommand readercmd = new SqlCommand(query);
try
readerconn.Open();
readercmd = readerconn.CreateCommand();
readercmd.CommandText = query;
readercmd.CommandType = System.Data.CommandType.Text;
SqlDataReader TestReader = readercmd.ExecuteReader();
return TestReader; //Getting error at this line
readerconn.Close();
catch (Exception e)
throw new Exception(e.Message);Hi,
Please firstly take a look at the documentation:
IDbCommand.ExecuteReader
Method
Users do not create an instance of a
DataReader class directly. Instead, they obtain the
DataReader through the
ExecuteReader method of the Command object. Therefore, you should mark
DataReader constructors as internal.
You need to use this method to get the IDataReader object, all the IDbCommand and IDataReader are in the Microsoft.ReportingServices.DataProcessing namespace. There's another IDataReader object which is in System.Data namespace, but they're actually two different
objects, that's why you got the exception.
For how to properly implement this Microsoft.ReportingServices.DataProcessing.IDataReader, please check this documentation:
Implementing a DataReader Class for a Data Processing Extension
It also provides code samples there.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Dear all ,
I have to convert char to dec , my requirement is to covert 12344434 to 123444.34 .
note i don't want 12344434 to 12344434.00 .
Thanks in advance
DebeshYou can try like this.
DATA : v_tot_len TYPE i,
v_off_len TYPE i.
DATA : v_off_text(50) TYPE c,
v_dec_text(2) TYPE c,
v_fin_text(50) TYPE c.
PARAMETERS : p_input TYPE text20 OBLIGATORY.
START-OF-SELECTION.
v_tot_len = STRLEN( p_input ).
v_off_len = v_tot_len - 2.
v_off_text = p_input+0(v_off_len).
v_dec_text = p_input+v_off_len(2).
CONCATENATE v_off_text v_dec_text INTO v_fin_text SEPARATED BY '.'.
Here I am inputting the text to be converted. -
IDOC to abap proxy- Receiver Service Cannot be converted into ALE logical
Dear all,
I have idoc to abap proxy -
R3 to SRM scenario.
I am getting the error Receiver service cannot be converted to ale logical system.
I have check the receiver bs SRM_BS , adapter specific attributes ... im getting the logical system ( this is not the problem)
i am using receiver XI adapter
with XI 3.0 as protocol
and http destination with /sap/xi/engine?type = receiver
i can see the data in the moni of receiver SRM system but it shows a red flag
pls helpHi kiran,
i have checked all the RFC destinations ... seems OK
problem is in SRM moni .. sender service and sender interface are not visible.
trace ::::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine/?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SR5</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCADMIN_SR5</Trace>
<Trace level="1" type="Timestamp">2008-06-01T16:27:03Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = DD2FF717DAE395F186DF001560A1C7CB</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0003</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0003</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface SupplierPortalTradingPartner_CreateOrChange_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SR5</Trace>
<Trace level="1" type="T">client = 300</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = RFCADMIN_SR5</Trace>
<Trace level="1" type="Timestamp">2008-06-01T16:27:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="Inbound Framework" />
- <!-- ************************************
-->
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<CX_ERROR href="#o3314" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o3314">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o3313" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
<PROGID>496</PROGID>
<CONTID>1564</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o3313">
- <CX_ROOT>
<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>496</PROGID>
<CONTID>1738</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_DYNAMIC_CHECK />
<CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
<AUTOMATIC_RETRY />
<CONTROLLER />
<NO_RETRY />
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
</CX_BBPX1_STD_MESSAGE_FAULT>
</cls:CX_BBPX1_STD_MESSAGE_FAULT>
</asx:heap>
</asx:abap>
</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
fault message says the sender is not having logical sys...but my sender sys is showing logical system in adapter specific attributes
pls help
points will be awarded -
Error in Mail configuration - parameters cannot be converted.
Hello All,
I have configured the mail configuration in 4.6d as per the notes 455127, 99965.
but when i try to send the test mail i got the error
Cannot process message in node, parameters cannot be converted ...
Can any one please help me....
the trace in SCOT is as follows.
SO_OBJECT_SEND Recipient in queue flagged
SO_OBJECT_SEND Structure: SOSCO
SO_OBJECT_SEND Status written for this recipient
SO_OBJECT_SEND Structure: SOST
SO_OBJECT_SEND Queue updated
SO_OBJECT_SEND Status updated
SO_OBJECT_ID_FOR_SEND_GET Object ID returned
SX_OBJECTS_SEND Document type: M. Send attribute class: 0. No. of recipients: 1
SX_OBJECTS_SEND Call of SX_PERFORM_RFCSEND with MAIL M RI-BEHEER
SO_CONVERTED_VERSIONS_GET Versions returned
SX_PERFORM_RFCSEND Nicht unterstützte Formate: ALI OBJ OTF SCR URL
SX_OUTGOING_VERSION_BUILD Read contents of document RAW35000000000132
SO_OBJECT_DATA_FOR_SEND_GET Object transferred
SO_OBJECT_PREPARE_FOR_SEND Object prepared for transmission
SX_SEND_DATA Structure: SXRECINFI1
SX_SEND_DATA Structure: SXEXTRECI1
SX_SEND_DATA Structure: SXPCKLSTI1
SX_SEND_DATA Structure: SXDOCCHGI1
SX_PERFORM_RFCSEND After call of function SX_OBJECT_RECEIVE Returncode: 8
SX_PERFORM_RFCSEND Structure: SXEXTRECI1
SX_GENERATE_NDR Cannot process message in node, parameters cannot be convertedHi,
The following errors in the trace file:
After call of function SX_OBJECT_RECEIVE ReturnCode: 8
Cannot process message in node, parameters cannot be converted
So the problem is caused by incorrect IMG configuration:
The SX_OBJECT_RECEIVE Returncode: 8 error message is caused by an incorrectly entered path in the RFC IMG connection (SM59) or by not calling MLUNXSND via a script.
The problem is that the mailgw.ini file not being present in /usr/sap/<SID>/SYS/exe/run/mlunxsnd or the <system_directory>/SYS/profile directory. MLUNXSND will check these two directories for a file call exactly mailgw.ini. If MLUNXSND does not find the file the error above is displayed.
I would recommend that you create a shell script per OSS Note 99965 and set the GWCONFIG parameter to point to maligw.ini.
Michael
Maybe you are looking for
-
Large external HDs not recognized by Windows 7 64-bit
Hi, I'm trying to see if someone else out there has had this same problem have has been able to solve it. I have an HP Pavilion DV6 - NQ615AV Entertainment Center PC. I'm running Windows 7 Professional 64-bit SP1. I have several external USB hard dri
-
I forgot my password for my accounts and a message keeps popping up and won't go away or let me use my iPad, how do I get my iPad back to normal?
-
I want to order a iphoto fotobook in Germany. The delivery address should be in US. Is this possible?
-
Use Java Timer to move a panel smoothly, need help!
I am using JBuilder to build an Windows Application. I put everything on the contentPane. There is one Panel I call it "jPanelDemo" and another panel "jPanelText". Now I want to start a timer, and move jPanelDemo panel from the right side of jPanelTe
-
Performance Tuning (creating Descending Indexes)
Hi, There is a huge table about 70 million Records. Huge data pool happens daily for the sysdate. For this table there is composite Primary key of c1,c2,c3 and hence the index is created (asc default). On Online Screen the latest data is queried from