Cannot be read from or Written to. And cannot eject ipod! PLEASE HELP

I'm having tonnes of problems with my ipod and itunes:
1. I just bought a brand new macbook, and wanted to put all the music from my ipod onto my macbook, So i followed the directions on here for how to do that. incidentally, it did not work, and i was prompt to do nothing else but restore my ipod. Now that i've restored my ipod i can't sync songs from my Macbook to my ipod, and message occurs say " Attempting to copy to disk "LAUR'S IPOD" failed, device could not be read from or written to" The same message occurs on my home PC with windows. I have the latest version of itunes, the latest software on my mac, i've called 1800 they couldnt help, My ipod is still recognized by my computers, and still charges, it just doesnt sync, i've also tried deleting damaged music files too. I've restored my ipod about 3 times and still no luck.
2.I also can never eject my ipod, a message occurs saying " cannot eject ipod, try closing applications first" and there are no other apps open. WHY IS THIS SO HARD!
PLEASE HELP ME!! I've been with music for too long!

Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Cheers,
Patrick

Similar Messages

Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything Windows 8.1

Lightroom 4.4 keeps crashing saying "Lightroom encountered an error when reading from its preview cache and needs to quit" please help. I've tried reinstalling it and everything Windows 8.1

I assume you know where your catalogue file (the lrcat file) is located. In the same folder is a previews lrdata folder which you should delete or rename in Explorer, then start LR again.
If I've made incorrect assumptions above, sorry, and we'll go back over it from the start.
John

20gb iPod, error 1418, "disk cannot be read from or written to", and others

I am having a series of serious issues with my 4th gen 20gb. I have tried restoring it several times, syncing if and when it restores, then restoring it again when it tells me "disk cannot be read from or written to". Sometimes when I try restoring it i get the "unknown error 1418" message, so I disconnect the iPod and try again; sometimes it restores, sometimes it doesn't. I have also tried plain resetting it (select+menu) and that either gives me the dead smiley ipod or a folder with an exclamation point.
What can I do to salvage my beloved iPod?
Thanks for any and all help.

If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

"Disk cannot be read from or written to" when syncing 30GB iPod

"Disk cannot be read from or written to" when syncing classic 30GB IPod.
We have a few thousand songs and about 50 videos on the above ipod. Just yesterday, we received the "disk cannot be read from or written to" message when trying to sync and charge the ipod.
Our software is up to date, and we restored the factory settings, to no avail. The ipod actually starts to sync, but after about 20 mins. we receive this message and only 103 songs and 21 videos have been synced. We have a second newer ipod with 80GB which syncs from the same itunes account with no problems.
We recently added photos, so we tried to sync the 30GB ipdo without the photos, but still received the subject error message.
Please help!

Sounds like a hardware problem - a bad disk or, at the very least, bad sectors on the disk in the iPod.
There probably is not much you can do. You can try putting the iPod into disk mode and check the drive using Windows:
Open My Computer
Right click the iPod
Choose Properties
Go to the Tools tab
Click the Check now button
Windows may or may not be able to salvage the drive. You do not say if you can still use the iPod without errors; there is the possibility that you will lose data on the iPod during the repair.

"The disk cannot be read from or written to" or

I recently updated my itouch software to the 3.1.2 software and when i restored it like I was supposed to my songs synced onto my itouch but you couldn't see them. On my computer it said my music was on my itouch but when I went to my library on my itouch, it said that my library was empty. When i plug my itouch into a different computer and turn it off and back on the music pops up. when i try to sync A message will come up and say the disk cannot be read from or written too and another pops up and says the required disk cannot be found. Does anybody have any idea how to fix this problem because i'm going on a trip in a couple weeks, and i want my ipod to be working?

bday10 wrote:
when i try to sync A message will come up and say the disk cannot be read from or written to
have you seen click this KB ?

IPod cannot be read from or written to on desktop but is fine on Macbook

I just got my iPod replaced (it was actually still under warranty when it died, I was astonished!) and my desktop keeps insisting that it cannot be read from or written to, yet when I plug it into my Macbook there is no problem. I've made sure that the software on all of them is up-to-date, I've run Norton and Disk Utilities on the desktop, but it still doesn't work with the iPod. I even tried to Restore the iPod from the desktop in case they just didn't quite match up but the computer said once again that it cannot be read from or written to.
Since the iPod works fine on the Macbook it seems like a safe assumption that the problem is somewhere on the desktop, but I'm running out of ideas.
Anyone have any brilliant (or just average) insights?
Power Mac G5 Mac OS X (10.3.9) Picture 60 GB iPod freshly replaced from the store

Have a try of this
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
Tip - In case you failed, find a window PC and do a Restore there, replug it back with your Mac and redo the Restore. Try to do several attempts

Disk cannot be read from or written to

When transferring files from a Windows XP Pro system to an iPod Nano, I will get an error the gist of which is "Disk cannot be read from or written to". The error is repeatable and only occurs on certain files. The nano is connected via a USB 1.1 port through a hub. (The machine has no USB 2.0 ports.) You can load other files with no problem both before and after the error appears; but not on the file which caused the problem.
The problem smells like a firmware bug.
(Note: I tried all of the standard resets and other workarounds - updater, etc. None of that works.)
iPod Nano Windows XP Pro

I have been getting the same error as well. The only thing I can figure out is to restore your ipod with an older version of the updater. I fortunately had an older version on my laptop, restored it to factory default, put it back on my pc where I originally had it, opened up itunes 5.0.1 (it wanted to update it to the newer version I had on my pc but I told it no) and I have been able to save songs. I tried the advice of others to reformat my ipod with the computer management and that didn't work either. I uninstalled, reinstalled, uninstalled, reinstalled, yada yada which did nothing. The only thing I have been successful with is using an older version of the updater. I can't figure out why the newer version won't work but every time I update, I get errors like you are having. I can save files to the ipod as well as songs with the older version. I can drag and drop files to the ipod using my computer as well. Can't do that when I update to a newer version of the ipod updater. Hope this helps and if anyone has any other insight into my problem, it would be greatly appreciated.

2nd iPod in a row saying "Disk cannot be read from or written to." Help!

My setup is as following:
MacBook Pro 2.16 Ghz Intel Core Duo
Mac OS X 10.5.2
Lacie 250GB External Hard Drive attached via Firewire
iPod Classic 160GB Black
iTunes 7.6.2 - Library has about 16,000 songs
Using the above setup, my 5th Generation iPod, my iPhone, and my iPod Nano all work just fine. My newly purchased iPod Classic however, refuses to work. Here is the story so far...
I have all of my music on my external hard drive. On the external, there is a folder entitled "iTunes." Inside of that, there are 2 folders. One entitled "Album Artwork" and on entitled "iTunes Music." The music folder contains all of the actual AAC and Mp3 files that makeup my iTunes Library. The actual library data itself, the files entitled "iTunes Library" and "iTunes Library.xml" are on my computer HD, in User>Music>iTunes. Now, I dont know why the library file is on the computer when all the music is on the external, but maybe thats just the way that works.
Anyway, I plugged in the new iPod Classic, it started to sync, and about 15 minutes in, I got a pop up box that said "iPod Sync failed. Disk cannot be read from or written to." So I did a few things to try to make it work. I reinstalled iTunes, I restored the iPod a few times. I set it to only sync music and not TV shows or Movies or Podcasts or Photos. I tried to sync it again. Nothing worked. So, thinking I had a bad iPod, I brought it to the store and swapped it out for a new one. Not a "new" one, but one from the back, so it was refurbished. I tried that. It still didn't work. So I called Apple tech support.
Tech support had me set my iPod for Manual use, and then alphabetically import songs by artists. In other words, bring over all the "A" artists, followed by the "B" artists and so on...So I did that, I got to importing a few songs by Cyndi Lauper, and it got to one song, called "Shine" and the error message came up. So I figured, there it was, the corrupted file. So I deleted it from my computer, and proceeded to go on importing manually, just in case. Well I continued for a while, and at the end of the day, there were about 100 songs that would not copy over. These were songs that worked just fine when you played them through iTunes, and worked just fine on all my other iPods.
So I manually transferred over all the songs that worked, which was about a 100 less than my full library. Along the way, instead of deleting the corrupted songs, I unchecked them. After I did the full manual transfer, I set up the iPod to an automatic sync, only syncing over songs that are checked, thinking the unchecked ones, the corrupted ones, would not even try to be transferred over and it work fine.
I was wrong. With the sync, this time it stopped on a song that was not corrupted the first time around. Not knowing what to do, I ejected my iPod, and it wouldn't eject. It said "iPod appears to be corrupt, please click restore." So I did that, thinking this would finally fix it, since the computer realized the iPod was messed up. I was wrong again. It didn't do anything, it just made it so I could eject my iPod.
So I'm now on my 2nd iPod classic. I've done what Tech Support has told me to do. Now I need help. Badly.

I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

IPod partially syncs & I get "Disk cannot be read from or written to"mssg.

Here's my initial problem:I think I Blew It. Tried to move iTunes from OS (C:) to DATA (D:). First I now realize that I should have come here first. But I didn't. I basically copied all of my iTune files into DATA (D:) and deleted them from OS (C:). Now when I open iTunes nothing is there. I left a couple of folders that wouldn't transfer from (C:) to (D:). One is a temp file 2, another is iTunes Music Library XML. doc. My iTunes music folder is empty and my iTunes library folder is pretty much empty too. The folders in DATA (D:) still have my 30 GB of music. So I wonder if I can undo this fiasco?
Here's where I am at today:Well I somehow got my library back. But I think I now have a couple copies of it on different drives. I configured the iTunes settings to feed off D drive but my problem now is I can't sync my ipod completely. I get the infamous "Disk cannot be read from or written to" when syncing iPod" message. I've tried restoring the ipod, creating a sync folder,checking and getting windows updates, and enabling the disc. I'm totally lost here.Please help all wise ones....

Let me add the advice Polydorus gave me to get back library: http://discussions.apple.com/thread.jspa?threadID=1327455&tstart=0 You haven't give enough information to tell exactly what the problem is.
Did you copy the iTunes folder to the d: drive, this folder contains the library databases and the iTunes Music folder.
If you did that, you can try starting iTunes with the shift key held down, when asked to choose a library, navigate to the iTunes folder on the external drive and choose iTunes Library.itl.
This only works if you copied the iTunes folder and you had a default arrangement with all your music files in the iTunes Muisc folder in the iTunes folder.
If you didn't do that and you don't mind losing your counts, ratings and playlists you can do the following:
I am going to assume that you still have your iTunes folder on the c:drive. Close iTunes and drag iTunes Library.itl and iTunes Music library.xml out of the iTunes folder to the desktop.
Then open iTunes and an empty library is created, first go to Editit>>Preferences>>Advance>>Gneral and check that the location of the iTunes Music folder is correctly set, then add the iTunes Music folder to iTunes with File>>Add folder to library. If you have music in other folders, you add those too.
Note that these two possibilities do not cover all eventualities, you will need to explain exactly what you did for further advice. POST NOTE: I basically drug the libray to the desktop and opened iTunes with the shift key held down, when asked to choose a library, I did and it came back.

"Disk cannot be read from or written to" When syncing CERTAIN songs to iPod

So I bought my friend's iPod Touch. I've talked to her about this issue and she's never experienced anything of the sort. When I got her iPod Touch I downloaded the newest software (3.1.2).
It's still currently running on 3.1.2 (as I know of no way to set it back to a previous version). When I try to update the iPod it will sync fine until reaching certain songs. These songs will freeze iTunes entirely for a few moments, an error message will pop up saying "Disk cannot be read from or written to". The only way I could go around this predicament was to go through my library and un-check the songs which caused the iPod sync to fail. This is quite annoying having to have several songs un-checked as some of them are the songs I want to listen to.
What can I do to fix this? I've reset and restored everything. Multiple times. Yet to no avail.
The error occurs only with songs, I have not run in to any errors updating applications (yet).
I'm running Mac OS X Snow Leopard, the iPod Touch is running 3.1.2 (the newest update), the iPod was originally purchased back in July.

I suggest you read through the following article for some help: http://support.apple.com/kb/HT1207
Normally, if you have a DRM'd song that you do not own, you will get an error (not this one, however) that the song will not/cannot be copied to your iPod. My feeling is that you might have some corrupted files.

When I tried to add music to my IPod Classic I rec'd a mesage that it could not be synced because it cannot be read from or written to. How do I remedy this?

I have an IPod Classic loaded with software version 1.1.2. I tried to add some music to it from my ITunes library and got a message that the IPod could not be sybced because it cannot be read from or written to. Please tell me how I can fix this issue. Thank you in advance for any assistance you can can give me.

Click here and follow the instructions.
(126846)

IPod disc "cannot be read from or written to" error

I have a 60gb color iPod which was just replaced by Apple due to an unrelated issue. The replacement iPod has trouble synching to my G5 tower via the USB cable. in iTunes, I get the error "Attempting to copy to the disk <iPod Name> Failed. The disc cannot be read from or written to." This occurs twice, once while iTunes tries copying music over, and then again when it tries copying photos over. Some of the songs incrementally copy over (maybe six or eight at a time), but I have thosuands of songs, so obviously this isn't practical. I have undertaken the steps described in http://docs.info.apple.com/article.html?artnum=301267 with no success.
Meanwhile, in the system.log, I'm seeing error messages as follows:
Feb 27 21:59:23 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 21:59:27 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 21:59:27 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 21:59:55 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 21:59:56 Orwell kernel[0]: jnl: close: flushing the buffer cache (start 0x8b400 end 0x8e600)
Feb 27 22:00:15 Orwell kernel[0]: jnl: journal start/end pointers reset! (jnl 0x1a4dd7c; s 0x8e600 e 0x8e600)
Feb 27 22:00:41 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 22:00:42 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 22:00:46 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 22:00:50 Orwell kernel[0]: jnl: close: flushing the buffer cache (start 0xd8400 end 0xdb600)
Feb 27 22:17:59 Orwell kernel[0]: jnl: journal start/end pointers reset! (jnl 0x1a4dd7c; s 0xdb600 e 0xdb600)
Feb 27 22:18:22 Orwell kernel[0]: disk1s3: data underrun.
Feb 27 22:19:02 Orwell kernel[0]: USBF: 11618.936 AppleUSBEHCI[0x197e800]::Found a transaction past the completion deadline on bus 75, timing out!
The "data underrun" line appears in the log just as iTunes displays the previously mentioned error dialogue box - they appear connected.
I am running OS X 10.4.5, iTunes 6.0.3, and the iPod is running 1.2.1 of the firmware. I have taken my iPod into the local Apple store, and the iPod syncs just fine with the in-store systems, both over USB and firewire. I just have the USB cable at home.
Help with troubleshooting would be appreciated.

Thank you so much! This is greatly appreciated. SERIOUSLY, man. How long have I been searching for this? And it would be so easy to just plug it up on that that http://docs.info.apple.com/article.html?artnum=301267 page. Hello, apple. Please do this.
I hope your hometown throws you a banquet or a parade. At the very least, buy yourself a cookie or something.
mac Mac OS X (10.4.5)

This iPod cannot be read from or written to

I have a 5th gen 30GB iPod that's about 18 months old and has been working fine until recently.
When I connect the iPod to the computer (2Ghz Macbook, 1GB memory, 80GB HD, OSX 10.4.8, iTunes 7.0.1), a message comes up saying "This disk cannot be read from or written to". The iPod itself works fine, but I'd dearly love to be able to update it! I am reluctant to erase it to find the error because I use it every day.
I don't have access to any other computers with iTunes installed, so I don't know if the problem lies with the iPod or the MacBook. Should I update iTunes/OSX?
Does anyone have any idea what's up with my iPod? I hope it's not dying...

The mystery deepens! Althout the iPod SAYS it can't be read from or written to, it is apparently being written to - I found some tracks on it this morning that definitely weren't there when I connected it last night. I didn't update iTunes or anything.
I guess my question is now "Why on earth is the computer displaying this message when it's not true?" I'm not sure about upgrading because I read that the latest version doesn't allow you to get songs off your iPod onto iTunes - which ***** if you suffer a HD failure or even just buy a new computer!

Disk cannot be read from or written to ERROR

my 3rd generation iPod will sync with iTunes BUT will load only one third of the songs before it freezes and reads and error saying "Disk cannot be read from or written to". It is not full and still says 5.82GB free.. I have used iPod Updater to retore and update the software but it doesn't help. After it has loaded the songs up to a certain amount (Same exact # of songseven if I wipe it out and re-sync), then when I connect it, if just freezes the iPod and my mac.

http://docs.info.apple.com/article.html?artnum=301267

"Your Ipod Cannot Be Read From Or Written To"

I brought my sister a 30 gb ipod video for her birthday and im putting music on it and getting "Your Ipod Cannot Be Read From Or Written To" this error message. Does anyone know what to do or how to fix it??

See this troubleshooting article.
"Disk cannot be read from or written to" error syncing iPod in iTunes.

I can't sync my photos on my iPhone 5 or IPad 2 from my MacBook Pro. It tells me my phone/pad cannot be read from or written to. Any ideas?

I can't sync my photos on my iPhone 5 or IPad 2 from my MacBook Pro. It tells me my phone/pad cannot be read from or written to. Any ideas?

No it't okay I finally figured it out!
I went to 'devices and printers'
it listed all the devices plugged in and on 'ipod' and 'iphone' there was a yellow '!' I clicked it and it troubleshooted the issue and now everything is working yay!

Cannot be read from or Written to. And cannot eject ipod! PLEASE HELP

Similar Messages

Maybe you are looking for