Cannot be setup by this software

When trying to setup the airport express with my iPad 2 (5.1) I get this message! Any ideas?

AirPort Utility for the iPad will only configure the newer "n" versions of the AirPort routers.
Check the model number of your AirPort Express by looking at the label on the side of the device.
The "n" version of the product is Model No A1264.  If you see A1084 or A1088, you will need to configure your AirPort Express using a Mac or PC.

Similar Messages

  • The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

    the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

    See the following to purchase earlier, compatible version for iOS 6
    App Store: Downloading Older Versions of Apps on iOS - Apple Club

  • I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.  I get the message "Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already

    I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
    I get the message “Adobe Lightroom 1.  Cannot be installed on this disk because a newer version of this software already exists on this disk”
    If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
    I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
    How can I solve this problem

    Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

  • The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

    The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • Ipod Touch Stuck On iTunes Screen. The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.

    I got a new ipod touch for Christmas.
    Today I was going to put music on it, i was told there was updates.
    So I went ahead to do them.
    My Ipod is stuck on the screen with the usb cord pointing to the itunes logo.
    In Itunes i'm told :
    Itunes has dected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
    Turning the ipod off - the same screen appears when it's back on.
    When I click restore ipod and after restore and update is clicked ; Extracting software loads up at the top.
    When its done this is the message I get:
    The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.
    I've been looking up trying to figure it out myself and have read making sure a setting in Lan Settings in Internet Properties has ; Automatically detect settings checked. I still get the same ipod message.
    I've tried holding the power and home key to turn it off, then powering it back on. But that doesn't work.
    I installed itunes today, so its up to date - I checked.
    I don't know what else to do.
    Can someone help me out, please? :}
    The operating system was ios 5 something? It wanted to update to 6 i believe.

    I've tried the top part but now that i've looked to the bottom:
    Additional Information
    The “hosts” file may also be blocking gs.apple.com.
    Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
    I put this in the url bar?
    When it gives me the list of names, im not sure what to do from there. The steps aren't that clear for me.

  • HT201210 (The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.) can anyone help me with this issue, every time i try to restore it will come up like this error m

    (The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
    can anyone help me with this issue, every time i try to restore it will come up like this error message.

    Restore the iPhone when connected to iTunes by cable.
    Still the same TS1275?
    Is your iPhone jailbroken?
    Or
    Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone?

  • HT201210 When I try to update my iphone to the latest iphone software on my MacBook in itunes a message displays "This iphone cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable.

    Hi guys, When I try to update my iphone4s to the latest software on itunes via my MacBook a message displays a message: 'This iPhone "Seans iphone" cannot be updated at this time because the iphone software update server could not be contacted or is temporarily unavailable'. This has happened a few time s now. I have look through the FAQ's but no luck. Can someon help? Cheers

    Try posting to the correct forum.
    This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
    Try posting to the iTunes for the Mac forum.

  • Cannot complete the download of  free trail of Photoshop CC could my AVG antivirus be to blame? I have tried 6 times to download this software

    I cannot complete the download of  free trail of Photoshop CC could my AVG antivirus be to blame? I have tried 6 times to download this software. I have a new pc   computer which is up to date.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • My iphoto library won't resume update. When I go to app storYou cannot update this software since you have not owned the major version of this software.

    I tried to update my photo library a week ago, but I stopped it. Now that I wanted to resume updating, it says in the app store "You cannot update this software since you have not owned the major version of this software." WHAT DO I DO??

    I already fixed mine, i used my other apple id to resume its update

  • HT1657 cannot play rented movie on my itunes. an error message "this movie cannot be played on this device" pops up. lates itunes software already installed. what to do????

    cannot play rented movie on my itunes. an error message "this movie cannot be played on this device" pops up. lates itunes software already installed. what to do????

    There are instructions for starting it on this page : http://support.apple.com/kb/TS1567

  • When I connect my Iphone 5 to sync with my Itunes on my PC I get a message- This Iphone cannot be used because required software is not installed.  Run Itunes installer to remove itunes then install itunes again.

    When I connect my Iphone 5 to sync with my Itunes on my PC I get a message- This Iphone cannot be used because required software is not installed.  Run Itunes installer to remove itunes then install itunes again.

    After uninstalling and reinstalling Itunes- issue was fixed.  Thanks!

  • HT4097 Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help

    Help! Everytime I try to update my iPad 2 on 4.3.3 it get is error message "The iPad "iPad" cannot be restored at this time because the iPad software update server could not be contacted or is temporarily unavailable." I dont know why please help.
    I'm running 4.3.3 on a ipad 2 im computer is connected via wire to internet

    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • 'this software cannot be installed on this computer' install error-why?

    10.3.9
    have the 2 10.4 dvd's. insert disc 1, 'install mac os x', restarts then begins installation, then get 'this software cannot be installed on this computer' message!!!
    have repaired disc and disc permissions from disc utility, have zapped pram, have pulled hair out!!! still get this message, anybody any ideas?
    all i want is 10.4 running!
    pb g4, 1.25, fw800, 1gb ram

    The grey discs will only install on the model of Mac with which they shipped. If these discs didn't ship with your Mac, and they don't work with your Mac, well then there's not much you can do.
    As far as it being legal or not, it is illegal to install this software on more than one Mac at the same time. If the original owner of these grey discs is no longer using the software and has removed the software from his system, and he has not retained other copies of it, then it is legal for him to transfer ownership of the software to you, and legal for you to use it. But that's not of much help to you if you don't have the correct model of Mac.
    Get the black retail Tiger install disc from amazon.com or elsewhere. It will work on all Mac models with built-in firewire.

  • This Software Cannot Be Installed on This Computer

    This seems to be a fairly common problem, but I haven't yet found a definitive solution. Basically, we decided to reinstall 10.4 on a couple computers (1.8 GHz iMac G5's) at work. It worked fine on the first computer, but it won't let us even install on the second.
    The 10.4 disc is inserted, and the computer boots up fine, and takes you to the language select screen. However, once I hit continue, it brings me to the "Install Mac OS X" screen, and says "This software can't be installed on this computer" and gives me the option to Restart or choose a different startup disk (there aren't any others).
    Now, we have a half dozen Macs here, and at least 3 sets of install discs. However, I've tried the three I could find (2 iMac G5 install discs, and one regular 10.4.4 disc) and they all give the same error. Should I keep looking for another install disc, or is the problem something else. Thanks!

    Ah, right, I should mention that we already attempted an erase and install (I think... I wasn't here for that part). Either way, it won't even let me get that far. The only thing I can choose is the language. After that, it says "Preparing Installation" followed immediately by the Install window popping up, looking like it's going to work, then saying "The software cannot be installed on this computer."
    The only things I can do from that point are choose the things in the Utilities menu. I've already tried repairing the disk. Any other ideas?

  • "This software cannot be instaled on this computer."

    I am attempting to install tiger onto a Macbook Pro. These are the install disks that came with the mac, but it says that they cannot be installed on this computer. Any Ideas?
    The disk says:
    Mac Os version 10.4.10
    AHT version 3A124
    Disk version 1.2
    2Z691-6088-A
    Thanks

    I seems to be a serious problem to install tiger on brand new allu imacs or macbooks pro. I spent two afternoons working with two different apple care experts without getting a satisfactory solution. They will let me know a solution soon!!!
    The closest you can get is the following: 1) partition the HD of the allu imac using leopard tools, 2) start the allu imac using target modus, 3) connect an white intel based imac and allu imac with firewire cable, 4) start the white imac and install in the tiger partition os x tiger -at least 10.4.7; 5) restart the allu imac with the alt key and the tiger volume; 6) install imac software update 1.2.1 (tiger); 7) upgrade to 10..4.11.
    That is the far you can go. The drawback is, you can use only airport in your network, the built-in ethernet interface cannot be configured. May be, this can help you in the meantime.

Maybe you are looking for

  • Best practice for deleting data

    I need to clear several years' worth of data from our environment.  In addition, we have a number of categories that need to be cleared as well.  Is there any need to actually clear the data prior to making making the dimension changes?  Or is it eno

  • New Mac Book Pro... No DVD Drive... Really?

    I know there are 50 excuses to leave it out, but a laptop top of this caliber lacking a blu-ray drive is bad enough but lacking a dvd drive all together is ridicoulous.

  • Copying Standard SAPScript to ZSapscript...

    Hi, I want to copy standard sapscript to zsapscript. I go in SE71 and enter the name of Z sapascript form and then create. Now when I go to Menu-> Form-> copy from: I give form name as MR_PRINT and give language as EN. It says MR_PRINT LANGUAGE EN is

  • Need Fields KDAUF, KDPOS, BWART update in table GLPCA for movement type 633

    Hi All, I need following field update in Table GLPCA for movement type 633 (Consignment Issue): KDAUF : sale document no. KDPOS : Order Line Otem BWART : Movement Type The same fields are updated for movement type 601 (Standard order). Also I checked

  • HT4623 why this update start again when cancelled

    i want to update my ios but it does not complete as i have no wireless connection. how i download this by part wise.