Cannot boot from external CD drive

Hi, I am trying to do a clean install of Snow Leopard on my Macbook Pro Core i7 (Late 2010).
First off I should note that I took out the CD drive in my macbook and put a 60GB SSD drive in its place, the SSD is blank and formated Mac OS (Journaled). This is the drive that I want to install the new OS too.
Anyway I went to the store to buy Snow Leopard (I lost the DVD that came with my mac) and am using that try to install the OS. I am currently using an external optical disk drive to install the OS (http://www.amazon.com/gp/product/B0044DEDBG).
The problem occurs when I load up the CD. When I start up my mac holding the "c" key the external optical drive is show on the screen. But when I select it the computer just stalls on the grey apple logo screen.
I have also viewed the CD in Snow Leopard and tried installing it that way. However when it automatically restarts my computer to boot from the CD it again stalls on the grey apple screen.
The "utilities..." button on the CD also does the same thing as above when I click it.
How can I boot from this external optical drive without getting stuck on the grey screen?

You need replacement original disks(phone Apple Support) and not a retail package.
(59473)

Similar Messages

All users GONE except for "Other"...and CANNOT boot from External DVD drive

I booted the iMac (Intel...the last one with the White Bezel) tonight, and all of my users were GONE except for "Other." The internal Superdrive has had a disc jammed in it for months, so instead I have an OWC external USB/FW400/FW800 DVD drive. Snow Leaopard.
I need to boot from the SL install disc, but that must go into the external drive...which, as it's been since I upgraded to SL, the Mac sometimes sees and sometimes doesn't. Right now it can't see it. Which leaves me a big pile of crap, doesn't it?
So, what to do? I can't boot the internal drive because it's jammed with a DVD (or I spend $300 to replace what should be a $20 optical drive in it), I can't boot the external DVD drive because the iMac w/Snow Lepeord can't see it, and, meanwhile, all of my photos, etc., are on my Time Machine backup drive...which, as long as I can't do any of the above, just sits there...useless.
Can you tell I'm a bit frustrated with this?
I've reset the PRAM. I've rebooted. I've held down all sorts of combinations of keys. I've tried every single interface type on the external drive and the same thing - the drive can't be seen by the computer.
Has the internal hard drive failed? Nope. I'm tying this using the Firefox browser that's running on my Windows XP installation via Boot Camp on the internal hard drive.

Thanks, but no luck so far.
I have an old iMac G3 downstairs, and I connected it to the machine via Firewire. I could see the disk on the 24" iMac, its folders, etc. I wanted to see if I could install OS X via Target Disk Mode from the old machine to the new one, but it's a PowerPC machine and you can't do that. Maybe you can't do that from ANY iMac...I'm not that experienced.
Now the iMac isn't booting at all to Windows via Boot Camp - it's been booting for 45 minutes now with the "WinXP" logo, but nothing. I'm about to throw it in the car and haul it over to my parents, who have both a Powerbook and a 27" iMac. Maybe it'll work there. Who knows.
Other ideas...replace the internal hard drive (cheap)...if that doesn't work, I'll just sell the thing. I'm not going to sink $300 into the thing when I can get a new machine for around $600-$700. I may go to a Windows7 machine on the desktop and a Powerbook...maybe even an iPad.
I really want to love this iMac. It's my first (well, I did have the G3, but that was just to play with) Mac. It's given me a ton of problems since I bought it new. It's always been a "stock" machine - nothing weird done to it. I was hit with an iMovie update once, and that broke iMovie. Even the new iLife 2009 didn't fix it. Then, the internal optical disk drive failed. I couldn't believe that Apple used a proprietary optical drive rather than a stock Pioneer model. Price for the drive alone? $200.
I installed Snow Leopard 2 months ago, and that completely broke my ability to use external optical drives. Sometimes they work...most times they don't. This is an ongoing problem that many people are having (check the forums)...but no fix. Where does that leave me? With a useless computer.
So, I've boiled it down to this: I love the Mac software. I hate the hardware. Sure, it's pretty, but if something goes wrong, get ready to pay. I hate that Apple knows about problems, yet does nothing to address them, like the problem with external optical drives and Snow Leopard.
I bought the Mac because I was sick of Microsoft not being able to simply produce an OS full of security holes. Often times I read people bashing supposed "driver ****" with Windows, but look at what users of Windows machine are demanding of Microsoft - "please make my software compatible with the trillions of combinations of hardware that can run the os...all the way back to stuff that was created in the mid 1990s." Meanwhile, from my experience, Apple can't get their software to work with their own proprietary, supposedly vertically-controlled hardware.
Windows7 is a not bad OS. It's got it's faults, of course. But, if my optical drive failed in a Windows box, I'd have it replaced in 10 minutes...with a bluray drive...that can write...for under $100.
I use my computer for pictures, etc. In fact, we were ready to send off to iPhoto for our yearly photo books. That's not going to happen, as the photos are forever trapped on my Time Machine backup drive (lesson learned: dump photos to a generic format...fat32 works...just in case you decide to switch from Mac to Win7). iLife is great. MS Office is great, too, on the Mac. I love the little things the Mac does right.
After years of screwing around with my Windows box, I wanted a computer that acted like a consumer electronic device. That's not what I've gotten.
Ugh, so now do I buy a Mac Mini for $700, a new iMac for $1,400, or a Macbook Pro and a mac mini?
...or...do I continue to work within this silly Ubuntu Linux world?
Whatever the answer, I wish I didn't have to ask the question now.

The Air cannot boot from external dvd-drive

Hi!
I am using my rev.2 air, 1.86 Mhz prosessor, 120 GB HDD, leopard 10.5.7 with a Samsung writemaster external dvd-writer, but I am having problems booting from it.
When I try to boot (pressing option) I can choose the disc and the applesymbol will appear, but the spinning wheel below does not, and the screen just stay the same until I cut the power.
I have tried to boot both the original OS X-disc and Windows 7 (both through boot camp and normal restart) with the same result.
Any help will be...well, helpfull

Not sure if this will help - but whenever I need to boot from an install disc on my MBA - i turn on the MBA and hold the 'c' key until i hear it loading the disc. that's how I boot off of optical discs... worth a try?

Boot from external Firewire Drive-cannot repair or optimize internal drive.

Hi all
Connected my new 300 GB Seagate External Firewire Hard Drive today.
Installed Tiger from DVD. Updated to 10.4.3.
Installed Tech Tool Pro 4. Updated to 4.1.1.
Booted from External Firewire Drive.
Disk Utility cannot Verify or Repair internal drive. Does not say or do anything.
Tech Tool Pro cannot repair volume or optimize. Says, "Cannot Unmount Volume."
Is there a fix for this?
Thank you for the help!
Jeff
eMac 800 nVidia. Mac OS X (10.4.3) 160 GB Internal HD. Pioneer Superdrive. 1 GB RAM.

Hi
I did name the new external completely different from the internal.
After booting from the external Firewire Hard Drive, I tried running Disk Utility and Tech Tool Pro from both drives. No matter which drive I run the Utilities from the same things happen every time...
Nothing happens when trying to use Disk Utility to Verify Volume on internal eMac Drive.
Tech Tool Pro says, "Cannot unmount volume" when trying to check Volume or Optimize internal drive.

Booting from external usb3 drive

Hi, I am trying to boot Linux from an external USB3 drive.
Here are the symptoms.
1. I have uefi boot disabled.
2. I connected a Toshiba USB3 drive to an USB2 port. The device is NOT recognized as a bootable device under Legacy Boot Devices list hence I cannot boot from the USB drive.
3. If I boot from internal HDD, then I can access the USB3 drive without any problems.
4. Plugged in an external USB3 Docking Device to the USB2 socket.
5. Then the USB3 Docking Device is recognized as a Legacy Boot Device and I can boot from the Docking Device.
6. Installed USB3 PCIe card.
7. Connected the USB3 Docking Device to USB3 port.
8. Now I the Docking Device fails to appear as a Legacy Boot Device.
9. Connected the USB3 Docking Device back to the USB2 port and straight away it is now recognized as a Legacy Boot Device.
I would appreciate if any one can give some hints on how to get the USB3 devices recognized as legacy boot devices.
Many thanks.

gdesilva wrote:
Hi, I am trying to boot Linux from an external USB3 drive.
Here are the symptoms.
1. I have uefi boot disabled. (did you mean secure boot?) Did you enable Legacy support?
2. I connected a Toshiba USB3 drive to an USB2 port. The device is NOT recognized as a bootable device under Legacy Boot Devices list hence I cannot boot from the USB drive
3. If I boot from internal HDD, then I can access the USB3 drive without any problems.
4. Plugged in an external USB3 Docking Device to the USB2 socket. This won't help
5. Then the USB3 Docking Device is recognized as a Legacy Boot Device and I can boot from the Docking Device.
6. Installed USB3 PCIe card.
7. Connected the USB3 Docking Device to USB3 port.
8. Now I the Docking Device fails to appear as a Legacy Boot Device.
9. Connected the USB3 Docking Device back to the USB2 port and straight away it is now recognized as a Legacy Boot Device.
I would appreciate if any one can give some hints on how to get the USB3 devices recognized as legacy boot devices.
Many thanks.
Help us to help you by posting the following information.
1. The full Model No. and Product No. of the desktop PC - see This HP web document if you don't how to locate the model number and\or product number.
Enter the BIOS after you have setup the bootable Linux hard disk as shown in the following video andenable usb 3.0 configuration in Pre-OS if it is available in the BIOS. That will enable you to use the USB 3.0 port to boot your usb3 external hard disk with Linux installed.
Which flavor of Linux? The video explains how to do this with Ubuntu.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Ibook g3 M2453 boot from external DVD drive

Hi, I'm Simon from Germany.
I have an iBook M2453 Mac OS X and a lot of dvds.
But the iBook has no DVD drive. So I bought an external DVD drive. But no matter what I do during boot (press the C key or alt)
I can not boot from external DVD drive.
Please help me
Thank you.
Simon.
PS: I have translated the text using Google translate

Hi Simon,
the iBook is able to boot from USB, but this is not expected behaviour and not supported by Apple.
http://support.apple.com/kb/TA20554
There are some external enclosures that do the trick.
But only when you press ALT after Power on. (Select a startup volume via the Startup Manager)
External enclosures with Prolific PL-3507 chipset (Firewire/USB Combo)
You will find them on Ebay Germany
I have a Delock IDE>USB 2.0 enclosure for 2,5" HDs
http://www.delock.com/produkte/gruppen/Geh%C3%A4use/Delock_25_external_enclosure _USB20_42365.html?setLanguage=EN
that works also.
Hallo Simon,
das läuft nur mit einigen wenigen externen Gehäusen. Such auf Ebay nach "PL-3507"
und nimm eins mit Firewire und USB Anschlüssen.
Ein Festplattengehäuse von Delock für 2,5" Festplatten ging auch ( Link oben)
Ein Boot ist nur möglich wenn du die ALT Taste nach dem Einschalten drückst und dann über den Startup manager dein Boot volume auswählst.

Booting from external hard drive on intel-based MacBook Pro

Good day everyone. I know similar questions were raised in this community, but I still have some questions.
I have MacBook Pro(late 2011) with OS X 10.7.5 and external hard drive with Ubuntu 13.04, from wich i can boot succefully on my PC. But MacBook Pro will not boot from my external drive, no matter which key/combination i use during restart.
After googling I found some answers to my initial question, how to boot from external hard drive
https://discussions.apple.com/thread/1852633?start=0&tstart=0
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-boot-from-exte rnal-firewire-or-usb-drive.html
http://support.apple.com/kb/ht1948
As I understand I need to format my external hard drive into GUID partition type and this will be enough to be able to boot from it on my mac?
With this new partition type, will I be able to install ubuntu again on my external drive?
Does GUID partition type supports NTFS, ext4 and FAT32, linux swap?(I use ntfs for big files, ext4 as partition for ubuntu and fat32, because i use windows, linux and osx)
Will I be able to boot from my pc from my external drive with this new partition type?
What are downsides, if any, to GPT?
here is info on my e-drive

LowLuster wrote:
The only OS that will boot from an external drive is Mac OS X or maybe Linux. For OS X to be installed on any drive it need to be formatted Mac OS Extended and have GUID partition table.
As for Linux I'm not that familiar with it but again for a Mac to boot it need an EFI partition on the drive and I don't think that is possible with NTFS or FAT32 let alone the native Linux format.
Went to wiki to learn more on efi but found artice on uefi.
Operating system loaders are a class of the UEFI applications. As such, they are stored as files on a file system that can be accessed by the firmware, called EFI System partition (ESP). Supported file systems include FAT32, FAT16 and FAT12, and supported partition table scheme is GPT only. UEFI does not rely on a boot sector, although ESP provides space for it as part of the backwards compatibility.[26]
Here is FAQ on official uefi website.
Can UEFI Secure Boot be adopted and implemented by a variety of operating systems?
UEFI specifications are platform-independent, supporting multiple platforms and architectures. In addition, UEFI specifications are designed to promote cross-functionality, as well as to support broad adoption across multiple operating systems, including Windows as well as Linux-based operating systems. The specifications are robust and can potentially complement—or even advance—other distributions, such as Linux-based distributions.
And here is wiki article on GPT expaining OS support.
It is obvious both uefi and GPT are ok with Linux and file systems such as FAT32, ext4 and NTFS.
I guess there is no much difference(or is that the same thing?) between uefi and efi used in Macs.
In your answer to Stark Industries you said that mac can boot linux from external hard drive, well this is not the info i got of official website and it is still my question, because your answer is very inconclusive and your info is partially incorrect

Hard drive dead/Boot from external hard drive?

My hard drive failed and I need a new one. For the time being, I'd prefer not to open up my iMac and replace the internal hard drive. I have an external USB hard drive and I cannot install OSX onto this drive (strangely, it takes the first disc but not the second).
Is it possible to boot and run an iMac G5 from an external hard drive? If so, what is required for hardware and what steps need to be taken?
If not, what course of action would you recommend?

It is very easy to boot an iMac from an external drive, but the drive should be a Firewire drive. Get one, then get SuperDuper!, which will enable you to clone your data and system to it. You can then choose the external firewire as your boot drive and operate without any problems.
Apparently, there are ways to boot from a USB drive, but they are complicated and a firewire drive is very straightforward and fast.
Let us know how you make out,

Macbook Pro - Boot from External Hard Drive

My Macbook Pro originally came with 10.7 Lion, is currently on 10.8 ML, and will soon be upgraded to 10.9 Mavericks. I have an older 10.6 Snow Leopard Clone. Can a Mac boot to an older version of OS X than what came preinstalled when it was new?

No, generally it cannot. If your model came with Lion originally, then it probably cannot boot from a retail Snow Leopard system, but it's possible it might from 10.6.8. All you can do is try, but you'll need an older model so you can install and update Snow Leopard on the external drive.

Booting From External DVD Drive Thru USB to install OS Tiger DVD

Hi,
I would like to reformat my iBook G4 from Panther to Tiger. I dont have DVD drive internally. I've got the DVD ROM of Tiger and external USB DVD Drive. Tell me the possible ways to do the installation beside Firewire connection.
Please help me.

Hi Nik,
AFAIK you cannot boot from USB devices. You could give it try by inserting the Tiger DVD into the external drive and rebooting your Mac while holding the "alt" key. If your DVD drive was bootable then -after a while- the DVD should come up as an option to boot from. But this is not likely to happen.
The best way to get Tiger on your iBook - unless you have anothet Mac with a DVD drive lying around - is to get the Media Exchange form from this website and to exchange your DVD for a set of CDs (minus a handling fee).
-Petra

Booting from external USB drive

I was wondering if there is any way to boot from a USB drive that I have? I partitioned the drive, erased it, and its basically ready to go. But I can't install Mac OS X on it because it says that I cannot reboot from the drive.
I know that iBook G4s generally can't boot from a USB devise but is there any way to get around this?

If you're computer is having kernel panics there's a conflict; either software or hardware. 2GB of free space isn't enough but I haven't seen anything that suggests KPs are caused by too little free space. Your computer should start fine with 2GB free. It may have problems after a period of use but it would startup and run.
Try starting in Safe Mode. If successful move some of your files to the external drive and then restart normally. If it KPs again, restart in safe mode and disable all startup items in System Preferences>Accounts>youraccount and restart. If it KPs again go through the linked troubleshooting steps by Dr. Smoke step by step. That's the only way to resole your problem.

Why won't my iMac 27" boot from external hard drive?

I have a new 27in Intel i5 dual core 3.6GHz iMac. It works wonderfully.
My question is this. I have a Pleides Ice Cube external hard drive with a USB 2.0/Firewire enclosure with a 500GB hard drive. I used diskutility to format the hard drive as a GUID Partition Table. I then used SuperDuper to clone the iMac OS 10.6.7 and Apps over to it.
I can select the external drive in System Preferences/Startup Disk to boot from, but when booting the iMac gets as far as the white screen then just stops loading.
I have tried both the USB connection and the Firewire connection (with a Firewire 800 to 400 cable).
I have run Disk Utility and repaired the disk and the preferences.
I have used Disk Warrior to rebuild the directory as well, but the iMac will not boot from the drive.
It does boot from the original DVD's and its own hard drive.
My old 24" iMac had no trouble booting from this hard drive or any of the others I have collected over the years, so I am reluctant to think it is the external drive. It is something to do with this particular processor Snow Leopard and external drives.

It sounds like something in the SuperDuper clone might not have copied well. To get the full answer on that I would check with Apple or SuperDuper to see if they support each other.
As a quick test, if you restart and immediately press and hold "option" on your keyboard do you see your external HD as an option to boot from? If so, click it and see if the boot runs any differently, but if you don't see it at all that could show that the problem is more deep rooted.
Personally, if looking in to either of those didn't give me any other info to go on, I would reformat and start the clone again. BTW, do you know for sure GUID Partition is the format you'd want to do this on? Generally macs use "Mac OS Extended" and some external HDs can use "FAT32" (if you want them to work well with Windows)
Hope that gives a little direction
Alex

Cannot boot from external HD

I have an external HD which my iMac backups my system daily. I use CCC for that and it has run fine so far. I never had any problem booting from that HD either by using Option/Alt during booting or thru using System Preferences.
Not now anymore. The iMac (late 2013, 27", FusionDrive) refuses to boot from it.
In System Preferences I can see the external HD as a bootable device. However the iMac still uses the internal drive.
When using Option/Alt I only see the internal drive and the restore partition.
I have made a (new) full backup to the external HD and CCC says it "blessed" the HD. But not possible to boot from. Further I did things like resetting Pram, resetting SMC. But does not help.
So next I installed the iMac from scratch (meaning starting the Internet restore and then do a full erase). But still the iMac will not boot from external.
I have connected the external HD to another Mac (Mini) and there it boots flawlessly. So to me there must be a problem with the iMac. But what can I do, this is a serious problem since I now have a backup but this can not fully be used?

- The issue is only if you want to boot from a USB3 external device.
- There are other ports on your machine that you can boot from, refer: Startup Manager: How to select a startup volume
- The ASC is not where Apple make announcements, Refer to their main website.
- Your question / query / feedback should be referred to : https://ssl.apple.com/support/feedback/
- If you find from Apple a resolution, post back. We would like to hear !
Cheers

Cannot boot from external SSD ...

Hello,
I have just made a fresh install of Mavericks on a brand new Samsung 840 EVO SSD (I initially erased the drive and formatted it to Mac OS Extended Journaled, then created a USB installation drive and performed the installation on the SSD …). It all went well, the computer restarted during this 30 min or so process … However, the problem is when I try to boot in the Samsung SSD at startup having the ALT key pressed, I can only see the 10.8.5 and its recovery partition … Any ideas as to why it doesn't show up the SSD which is connected via USB 3.0 to my laptop ?
Also, even if I go in Mountaion Lion at the Start-up disk option and select the Samsung SSD with 10.9 it still boots into ML … Has anyone encountered this before ?
Thank you.
*non-Retina Macbook Pro 15 inch, mid-2012

Hi Ralph,
thanks a lot for the helpful information! But the problem still persists, and I don't know what's wrong about the installation. I again checked the case and device are fully compatible with Windows 8 on USB 3 and the current boot camp drivers are installed - so everything should work perfectly fine as Windows 8 does natively support booting from external USB-3-devices.
I personally still assume it's rather a driver related problem as the external SSD doesn't even show up whilst booting into the boot menu with "Alt" pressed - I can only choose to boot from the external SSD within the "start volume" menu in OSX (which then doesn't work out when rebooting, unfortunately). I mean, if there was a chance to boot from the external SSD with the configuration I got right now, but OSX/the iMac just "doesn't know" it shall boot from the external partition and therefore rather chooses the internal boot camp partition, the SSD would at least show up in the boot menu when pressing "Alt" on start-up, or do I go completely wrong? I even tried to rename the internal bootcamp partition (which did not work out) or disable it in order to prevent OSX/the iMac to boot from the internal bootcamp partition, but it didn't help: After rebooting it again chose the internal boot camp partition to start from.
Might the deletion of the internal partition be worth a try? Meaning is there a realistic chance that the issue might be caused by that? I would give it a try although I really don't wanna loose the internal boot camp partition for no good reason (btw: would it be possible to clone an image back from the external SSD to the internal HDD then?). Or do you maybe have any other idea what driver could miss resp. could be wrong about the installation so the boot process from the external SSD fails...?
Again MANY MANY THANKS in advance for your further assistance, everybody!!

Noise when booting from external firewire drive

When booting from a Maxtor drive with OS10.3.9 to the iMac G5 with Tiger the fan makes a lot of noise. Why?
When I reboot into Tiger the fan is normal.
Reasons?
Thanks

The fans are controlled by code in the OS you boot from. It sounds like the OS you have on your external Maxtor is older then your iMac G5. As a results it may not have the needed fan control code. When that occurs, the Firmware in the iMac, sets the fans to a high speed to ensure your computer will not overheat.
Tom N.

Cannot boot from external CD drive

Similar Messages

Maybe you are looking for