Cannot boot from external HD

I have an external HD which my iMac backups my system daily. I use CCC for that and it has run fine so far. I never had any problem booting from that HD either by using Option/Alt during booting or thru using System Preferences.
Not now anymore. The iMac (late 2013, 27", FusionDrive) refuses to boot from it.
In System Preferences I can see the external HD as a bootable device. However the iMac still uses the internal drive.
When using Option/Alt I only see the internal drive and the restore partition.
I have made a (new) full backup to the external HD and CCC says it "blessed" the HD. But not possible to boot from. Further I did things like resetting Pram, resetting SMC. But does not help.
So next I installed the iMac from scratch (meaning starting the Internet restore and then do a full erase). But still the iMac will not boot from external.
I have connected the external HD to another Mac (Mini) and there it boots flawlessly. So to me there must be a problem with the iMac. But what can I do, this is a serious problem since I now have a backup but this can not fully be used?

- The issue is only if you want to boot from a USB3 external device. 
- There are other ports on your machine that you can boot from, refer: Startup Manager: How to select a startup volume
- The ASC is not where Apple make announcements, Refer to their main website.
- Your question / query / feedback should be referred to : https://ssl.apple.com/support/feedback/
- If you find from Apple a resolution, post back.  We would like to hear !
Cheers

Similar Messages

  • Cannot boot from external SSD ...

    Hello,
    I have just made a fresh install of Mavericks on a brand new Samsung 840 EVO SSD (I initially erased the drive and formatted it to Mac OS Extended Journaled, then created a USB installation drive and performed the installation on the SSD …). It all went well, the computer restarted during this 30 min or so process … However, the problem is when I try to boot in the Samsung SSD at startup having the ALT key pressed, I can only see the 10.8.5 and its recovery partition … Any ideas as to why it doesn't show up the SSD which is connected via USB 3.0 to my laptop ?
    Also, even if I go in Mountaion Lion at the Start-up disk option and select the Samsung SSD with 10.9 it still boots into ML … Has anyone encountered this before ?
    Thank you.
    *non-Retina Macbook Pro 15 inch, mid-2012

    Hi Ralph,
    thanks a lot for the helpful information! But the problem still persists, and I don't know what's wrong about the installation. I again checked the case and device are fully compatible with Windows 8 on USB 3 and the current boot camp drivers are installed - so everything should work perfectly fine as Windows 8 does natively support booting from external USB-3-devices.
    I personally still assume it's rather a driver related problem as the external SSD doesn't even show up whilst booting into the boot menu with "Alt" pressed - I can only choose to boot from the external SSD within the "start volume" menu in OSX (which then doesn't work out when rebooting, unfortunately). I mean, if there was a chance to boot from the external SSD with the configuration I got right now, but OSX/the iMac just "doesn't know" it shall boot from the external partition and therefore rather chooses the internal boot camp partition, the SSD would at least show up in the boot menu when pressing "Alt" on start-up, or do I go completely wrong? I even tried to rename the internal bootcamp partition (which did not work out) or disable it in order to prevent OSX/the iMac to boot from the internal bootcamp partition, but it didn't help: After rebooting it again chose the internal boot camp partition to start from.
    Might the deletion of the internal partition be worth a try? Meaning is there a realistic chance that the issue might be caused by that? I would give it a try although I really don't wanna loose the internal boot camp partition for no good reason (btw: would it be possible to clone an image back from the external SSD to the internal HDD then?). Or do you maybe have any other idea what driver could miss resp. could be wrong about the installation so the boot process from the external SSD fails...?
    Again MANY MANY THANKS in advance for your further assistance, everybody!!

  • Cannot boot from external CD drive

    Hi, I am trying to do a clean install of Snow Leopard on my Macbook Pro Core i7 (Late 2010).
    First off I should note that I took out the CD drive in my macbook and put a 60GB SSD drive in its place, the SSD is blank and formated Mac OS (Journaled). This is the drive that I want to install the new OS too.
    Anyway I went to the store to buy Snow Leopard (I lost the DVD that came with my mac) and am using that try to install the OS. I am currently using an external optical disk drive to install the OS (http://www.amazon.com/gp/product/B0044DEDBG).
    The problem occurs when I load up the CD. When I start up my mac holding the "c" key the external optical drive is show on the screen. But when I select it the computer just stalls on the grey apple logo screen.
    I have also viewed the CD in Snow Leopard and tried installing it that way. However when it automatically restarts my computer to boot from the CD it again stalls on the grey apple screen.
    The "utilities..." button on the CD also does the same thing as above when I click it.
    How can I boot from this external optical drive without getting stuck on the grey screen?

    You need replacement original disks(phone Apple Support) and not a retail package.
    (59473)

  • All users GONE except for "Other"...and CANNOT boot from External DVD drive

    I booted the iMac (Intel...the last one with the White Bezel) tonight, and all of my users were GONE except for "Other." The internal Superdrive has had a disc jammed in it for months, so instead I have an OWC external USB/FW400/FW800 DVD drive. Snow Leaopard.
    I need to boot from the SL install disc, but that must go into the external drive...which, as it's been since I upgraded to SL, the Mac sometimes sees and sometimes doesn't. Right now it can't see it. Which leaves me a big pile of crap, doesn't it?
    So, what to do? I can't boot the internal drive because it's jammed with a DVD (or I spend $300 to replace what should be a $20 optical drive in it), I can't boot the external DVD drive because the iMac w/Snow Lepeord can't see it, and, meanwhile, all of my photos, etc., are on my Time Machine backup drive...which, as long as I can't do any of the above, just sits there...useless.
    Can you tell I'm a bit frustrated with this?
    I've reset the PRAM. I've rebooted. I've held down all sorts of combinations of keys. I've tried every single interface type on the external drive and the same thing - the drive can't be seen by the computer.
    Has the internal hard drive failed? Nope. I'm tying this using the Firefox browser that's running on my Windows XP installation via Boot Camp on the internal hard drive.

    Thanks, but no luck so far.
    I have an old iMac G3 downstairs, and I connected it to the machine via Firewire. I could see the disk on the 24" iMac, its folders, etc. I wanted to see if I could install OS X via Target Disk Mode from the old machine to the new one, but it's a PowerPC machine and you can't do that. Maybe you can't do that from ANY iMac...I'm not that experienced.
    Now the iMac isn't booting at all to Windows via Boot Camp - it's been booting for 45 minutes now with the "WinXP" logo, but nothing. I'm about to throw it in the car and haul it over to my parents, who have both a Powerbook and a 27" iMac. Maybe it'll work there. Who knows.
    Other ideas...replace the internal hard drive (cheap)...if that doesn't work, I'll just sell the thing. I'm not going to sink $300 into the thing when I can get a new machine for around $600-$700. I may go to a Windows7 machine on the desktop and a Powerbook...maybe even an iPad.
    I really want to love this iMac. It's my first (well, I did have the G3, but that was just to play with) Mac. It's given me a ton of problems since I bought it new. It's always been a "stock" machine - nothing weird done to it. I was hit with an iMovie update once, and that broke iMovie. Even the new iLife 2009 didn't fix it. Then, the internal optical disk drive failed. I couldn't believe that Apple used a proprietary optical drive rather than a stock Pioneer model. Price for the drive alone? $200.
    I installed Snow Leopard 2 months ago, and that completely broke my ability to use external optical drives. Sometimes they work...most times they don't. This is an ongoing problem that many people are having (check the forums)...but no fix. Where does that leave me? With a useless computer.
    So, I've boiled it down to this: I love the Mac software. I hate the hardware. Sure, it's pretty, but if something goes wrong, get ready to pay. I hate that Apple knows about problems, yet does nothing to address them, like the problem with external optical drives and Snow Leopard.
    I bought the Mac because I was sick of Microsoft not being able to simply produce an OS full of security holes. Often times I read people bashing supposed "driver ****" with Windows, but look at what users of Windows machine are demanding of Microsoft - "please make my software compatible with the trillions of combinations of hardware that can run the os...all the way back to stuff that was created in the mid 1990s." Meanwhile, from my experience, Apple can't get their software to work with their own proprietary, supposedly vertically-controlled hardware.
    Windows7 is a not bad OS. It's got it's faults, of course. But, if my optical drive failed in a Windows box, I'd have it replaced in 10 minutes...with a bluray drive...that can write...for under $100.
    I use my computer for pictures, etc. In fact, we were ready to send off to iPhoto for our yearly photo books. That's not going to happen, as the photos are forever trapped on my Time Machine backup drive (lesson learned: dump photos to a generic format...fat32 works...just in case you decide to switch from Mac to Win7). iLife is great. MS Office is great, too, on the Mac. I love the little things the Mac does right.
    After years of screwing around with my Windows box, I wanted a computer that acted like a consumer electronic device. That's not what I've gotten.
    Ugh, so now do I buy a Mac Mini for $700, a new iMac for $1,400, or a Macbook Pro and a mac mini?
    ...or...do I continue to work within this silly Ubuntu Linux world?
    Whatever the answer, I wish I didn't have to ask the question now.

  • The Air cannot boot from external dvd-drive

    Hi!
    I am using my rev.2 air, 1.86 Mhz prosessor, 120 GB HDD, leopard 10.5.7 with a Samsung writemaster external dvd-writer, but I am having problems booting from it.
    When I try to boot (pressing option) I can choose the disc and the applesymbol will appear, but the spinning wheel below does not, and the screen just stay the same until I cut the power.
    I have tried to boot both the original OS X-disc and Windows 7 (both through boot camp and normal restart) with the same result.
    Any help will be...well, helpfull

    Not sure if this will help - but whenever I need to boot from an install disc on my MBA - i turn on the MBA and hold the 'c' key until i hear it loading the disc. that's how I boot off of optical discs... worth a try?

  • Cannot boot from external HDD on Satellite L100-130

    My os is Wxp-Pro,when i create a image with Acronis treu image, put the image on the ex HDD.
    Restart en boot from cd/dvd,,my system will not see the ex H-D.
    How is this possible ???
    (SATELLITE L100-130)
    Please mail to :[email protected]

    My new install(xp PRO)see the usb,because when i put in my ex-H-D it works,but only in windows.
    When i restart,boot from cd/cdrom,put in acronis cd,my notebook will not pickup my ex-hd.
    I don't have to enable usb in acronis.
    That's why I find it strange.
    It works,,only when I juse the recover cd(xp HOME) from toshiba,and install it,then i can boot from cd/cdrom,put in acronis cd,and there i can SEE my ex H-D.and replace the image!!
    I have give it a try on my desktop,the same version xp pro,and it works,it see my ex H-D,why not on my notebook,is there something wrong whit the usb on my notebook??
    Gr.Gerrie

  • Cannot boot from external USB device

    Hi,
    I have an iMac with a superdrive that is not working. This gives me a lot of trouble, because I want to install windows.
    Some month ago, I bought an external USB DVD drive, and hoped that it would help. But I quickly experienced that it did not, since I could not get boot camp to use it.
    Today, I was sure that I found a good solution. I ran into a site that explains how to use en external DVD to install windows on macbook air which have no internal DVD.
    http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
    Unfortunately this do not work - for me and my iMac.
    First I installed the rEFIt tool and this works fine. The external DVD shows up as a bootable device.
    But when I try to start the windows installer from the external DVD, the system just hangs and shows a windows logo with no color. This operation I carry out by selecting the external DVD in the eEFIt menu.
    Any suggestions will be appreciated.

    I don't know about the link you gave, I can only pass on my experience.
    I made my bootable Windows7 X64 install disk by this method:-
    "This method is used to create a new install disk if you have your authentic Windows 7 disk. Don't sweat it; it's much easier than it looks.
    Note: you will need to do this on a PC
    In your C drive, create these two folders: c:\windows7exe c:\windows7dvd
    Go to this link http://rapidshare.com/files/297067205/oscdimg.exe and download Oscdimg.exe. Place it into c:\window7exe folder
    Insert your Windows 7 disk into your DVD drive For this example, we will refer to it as the D drive.
    You need to open a DOS prompt window. Do this by going to start/programs/accessories/command prompt
    Your default command prompt will look something like C:\Users>.
    At the prompt type cd c:\windows7exe
    Your command prompt should now look like c:\window7exe>
    At the command prompt, type in exactly (or copy and paste):
    oscdimg.exe -n -m -bd:\boot\etfsboot.com d:\ c:\windows7x64.iso
    Note: the letter d in the above command refers to your DVD drive, change it if your DVD drive is labled with a different letter.
    Press Enter. This will begin creating a new disk image. You should see a response in the DOS window that displays its progress.
    When the process is complete, you will find a new disk image of your Windows 7 disk in the folder labeled c:\windows7X64
    Now that you have a new disk image, you need to burn it onto a disk using ImgBurn. This is a free utility which you can download from here: http://www.imgburn.com/index.php?act=download
    Place a blank DVD into your DVD RW drive.
    Launch ImgBurn and select "Write image file to disc". In the Source window, find your newly burned image in the c:\windows7X64 folder. Click on the disc icon at the bottom of the window to begin the burning process.
    Voila! You have a new Windows 7 installation disk which will install with no problems. "
    .....which is on this thread
    May not be any use to you without an internal DVD RW which works.
    In your shoes I would really want to get my internal superdrive working.
    A quick look at iFixit suggests the iMac uses a standard laptop DVD RW which are readily available, but perhaps I am missing something.

  • Boot from external Firewire Drive-cannot repair or optimize internal drive.

    Hi all
    Connected my new 300 GB Seagate External Firewire Hard Drive today.
    Installed Tiger from DVD. Updated to 10.4.3.
    Installed Tech Tool Pro 4. Updated to 4.1.1.
    Booted from External Firewire Drive.
    Disk Utility cannot Verify or Repair internal drive. Does not say or do anything.
    Tech Tool Pro cannot repair volume or optimize. Says, "Cannot Unmount Volume."
    Is there a fix for this?
    Thank you for the help!
    Jeff
    eMac 800 nVidia.   Mac OS X (10.4.3)   160 GB Internal HD. Pioneer Superdrive. 1 GB RAM.

    Hi
    I did name the new external completely different from the internal.
    After booting from the external Firewire Hard Drive, I tried running Disk Utility and Tech Tool Pro from both drives. No matter which drive I run the Utilities from the same things happen every time...
    Nothing happens when trying to use Disk Utility to Verify Volume on internal eMac Drive.
    Tech Tool Pro says, "Cannot unmount volume" when trying to check Volume or Optimize internal drive.

  • Hello.. my hp dv6748us cannot boot from usb nor external harddrive.​. may harddisk is already broken

    hello.. my hp dv6748us cannot boot from usb nor external harddrive.. may harddisk is already broken so i bought i new one. my internal dvd drive doesnt work also.. can anyone help pls.. thnks

    Is USB boot enabled in the bios, it should be able to boot from USB.
    Other than that you will need a working DVD drive.

  • Can't boot from external HD with Leopard on MacBook Pro or PowerBook

    I can't boot from an external HD with 10.5.5 Leopard on either my MacBook Pro or my PowerBook G4. I had a PowerBook G4 from which I could boot from either an external FW400 drive or an external FW800 drive. At some point, I stopped being able to boot from any HD, but I'm not sure if it was after upgrading to Leopard or not? Recently I just bought a MacBook Pro 15" and transferred all my files over from the PowerBook to the MacBook Pro during the install. However, even with the new computer, still cannot boot from an external drive. I have Leopard 10.5.5 running on both the external HD and the internal HD.
    Is this a common problem? Anybody know how to fix it?
    Thanks!

    That probably wasn't very clear was it? I have several ext. HD's, some with bootable systems and some just backups. One bootable disk was made with CopyCloner and the other was a clean format and only had an original install of the OS just to use for an emergency boot. They both booted just fine. Then at some point, they stopped being bootable. I have used the Control Panel "Startup" and also used the Option key boot and picked the bootable disk. Neither one boots anymore. It started doing this on the old PowerBook and then also refused to boot on the MacBook Pro. This is not the problem with the HD since it happens with any bootable HD. Something is going on at the system level and it was transfered from the PowerBook to the MacBook.
    Thanks,
    Bill

  • Help: Cannot boot from leopard disc anymore, everything else fine

    I was working on an ibook and messing with it in firewire mode and was going to install leopard on it that way from my macpro. (just letting you know the context)
    I tried to restart my machine(mac pro) and boot leopard both by pushing C and by running the installer.
    I get the "You need to hold the power button panic message" everytime I do this. I unplugged external devices and tried this also and it has the same problem.
    I cannot boot from the dvd anymore. If I eject the disc, osx loads normally.
    Any ideas what I can do? (I have tried safe boot, pram clearing and hold option on boot to check options)
    Here is the kernel panic when it finally loads into osx.
    here is the kernel panic log when it reboots into OSX
    Sat May 17 14:13:09 2008
    panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x894ec373, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00df8000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0a5a1004
    CR2: 0x00000018, EBP: 0x817c3bc8, ESI: 0x0a4c5c00, EDI: 0x0a4c5c00
    EFL: 0x00010246, EIP: 0x894ec373, CS: 0x00000008, DS: 0x0a3c0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x817c39d8 : 0x12b0e1 (0x4555b4 0x817c3a0c 0x133238 0x0)
    0x817c3a28 : 0x1a7bed (0x45e568 0x894ec373 0xe 0x45dd24)
    0x817c3b08 : 0x19e517 (0x817c3b20 0xa83c980 0x817c3bc8 0x894ec373)
    0x817c3b18 : 0x894ec373 (0xe 0x48 0x10 0x10)
    0x817c3bc8 : 0x894db540 (0x0 0xa83c980 0xa4c5c00 0x1)
    0x817c3c08 : 0x78d45139 (0xa4c5c00 0x1 0x0 0x13)
    0x817c3c68 : 0x78d3e940 (0xa4c5c00 0x2407 0x817c3d2c 0xa4c5c00)
    0x817c3c98 : 0x40c515 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
    0x817c3ce8 : 0x437535 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
    0x817c3d48 : 0x18c8aa (0xa4c5c00 0xacd8130 0x0 0x0)
    0x817c3db8 : 0x12d165 (0xa525c78 0xaa76b90 0x817c3df8 0x11ee04)
    0x817c3df8 : 0x126247 (0xa525c00 0xa2f9254 0xaad84b0 0x0)
    0x817c3f08 : 0x196afc (0x817c3f44 0x0 0x0 0x0)
    0x817c3fc8 : 0x19eb34 (0xab382a0 0x0 0x1a10b5 0xa63f208)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff378
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0x894d8000->0x89704fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0x78cc5000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000
    com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000->0x78d51fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)

    I really appreciate everyone's help.
    I am certainly not above taking the machine in but I will say this.....
    I have been building and working on PC's for 15-20 years. I have never once used or had the need for a repair shop. It is my hobby. I recently switched to osx to give the mac a try and I love it.
    I will say that vista/xp has four times as many problems but at least i can fix whatever comes my way hardware or software.
    Any more ideas how to settle this without making my first trip to the repair shop ever?...
    Chad

  • Cannot boot from DVD since 10.4.6 update.

    My Quad cannot boot from the Superdrive at all.Upon updating I decided to repair permissions from the DVD but everytime I got to the Apple logo the fans powered up,full tilt. I had to turn the Quad off from the power button and start up holding down the mouse, in order to eject the DVD.
    As far as I remember, I allowed the computer to start up twice, and disconnected all peripherals whilst updating.
    I've tried zapping the pram and resetting the nvram to no avail.I've inserted Disk Warrior and that will not boot. The computer runs fine from the HD (although there was one occasion when, briefly, a small OS9-style Mac monitor appeared with a question mark, then made way for a proper boot), but I'm really concerned at this problem. I do not want to wipe the system drive and start from scratch,since I've only just finished migrating a whole buch of software from another G5, and I have TV job looming.
    Incidentally, both my other G5's and Mac Mini updated with no perceptable problems. Can anyone shed any light on this and, perhaps, offer a solution (other than a wipe ! ).
    Thank you.
    G5 Quad 2.5,G5's DP 2.5/2.0,Mac Mini   Mac OS X (10.4.5)   MOTU 2408's Mk3x3,24i/o,Hammerfall HDSP 9652x3

    Any installation can theoretically cause harm. If you aren't backed up, you may be forced to use Target Disk Mode if you can't boot a DVD, or an external DVD burner that supports booting. Both LaCie and Otherworld Computing have external Firewire DVD drives that support booting. Target Disk Mode is described here:
    http://docs.info.apple.com/article.html?artnum=58583
    Fortunately when you boot via Firewire or use Target Disk Mode, you bypass the hard drive's bootloading software, which you don't when you use the internal optical drive.

  • Macbook Pro - Boot from External Hard Drive

    My Macbook Pro originally came with 10.7 Lion, is currently on 10.8 ML, and will soon be upgraded to 10.9 Mavericks.  I have an older 10.6 Snow Leopard Clone. Can a Mac boot to an older version of OS X than what came preinstalled when it was new?

    No, generally it cannot. If your model came with Lion originally, then it probably cannot boot from a retail Snow Leopard system, but it's possible it might from 10.6.8. All you can do is try, but you'll need an older model so you can install and update Snow Leopard on the external drive.

  • Boot from external firewire HD with ibook G4

    I have installed a copy of my tiger OS on a passport studio portable HD. I then upgraded it to leopard using my installer disk. I am able to boot my desktop imac with it but I cannot do the same for my ibook which is what I want it for. I used the "universal method" of installing to the drive. It is partitioned using APM as instructed. The drive shows up on my desktop and the software is there but I cannot boot from it using system preferences, holding the option key or even restarting from the installer disk. I am open to any suggestions at this point.

    The Passport Studio?
    I'm not familiar with that devices specifications;
    but if it sports USB 2.0 and not FireWire400,
    and does not have the equivalent of an Oxford
    chipset, it won't support booting PPC Macs.
    Or it may, but sometimes a brand of hard disk
    within some enclosures don't boot Mac well.
    Anyway, you could see if the OS X Installer's
    version of Disk Utility can repair the disk drive
    or see if there are any error reports from there.
    Apple Partition Map is the forma; HFS+ should
    work, if it isn't the same and there is no option.
    But Intel Macs use a different format scheme.
    {Is the installer disc a suitable one for the
    computer you have, or is it from a different
    Mac model and version? Is it older than
    the computer, or is it the as-shipped disc?
    It would have to be a machine specific or
    retail disc newer than the as-shipped OS.}
    Newer Macs with Intel processor can boot from
    a properly formatted USB 2.0 externally powered
    hard disk drive and enclosure. Or in some cases
    a USB powered device... Or, a reduced version
    of OS X on a specially-prepared USB Flash drive.
    Was the system on an external FW HD put
    there via a clone utility, as taken from a full
    normal installed system, from a computer?
    Or was the external FW HD the recipient
    of a full new installation to the attached drive
    from the host computer, as an optional place
    to install the OSX version you have?
    There are some rules, of those a few can be
    found in the home page, Carbon Copy Cloner.
    The basics for cloning vary with the software
    utilities used and it is possible to make a bad
    clone which cannot boot a computer in FW.
    Or one so corrupted, that an hour's wait and
    time spent fixing bad permissions is needed.
    In the meantime, I am set to go a few hundred
    miles and won't be taking a computer; no net
    and too cold of weather.
    Hopefully someone will see this thread and
    add some thoughts on the topic. Sorry I was
    not of more help.
    Good luck & happy computing!
    edited.

  • Booting From External DVD Drive Thru USB to install OS Tiger DVD

    Hi,
    I would like to reformat my iBook G4 from Panther to Tiger. I dont have DVD drive internally. I've got the DVD ROM of Tiger and external USB DVD Drive. Tell me the possible ways to do the installation beside Firewire connection.
    Please help me.

    Hi Nik,
    AFAIK you cannot boot from USB devices. You could give it try by inserting the Tiger DVD into the external drive and rebooting your Mac while holding the "alt" key. If your DVD drive was bootable then -after a while- the DVD should come up as an option to boot from. But this is not likely to happen.
    The best way to get Tiger on your iBook - unless you have anothet Mac with a DVD drive lying around - is to get the Media Exchange form from this website and to exchange your DVD for a set of CDs (minus a handling fee).
    -Petra

Maybe you are looking for