Cannot boot from newly-created TTP eDrive

I have created an eDrive (on an external USB drive). TTP4 (4.5.2) shows the eDrive (it's an option under their "eDrive" function) but when I select it for restart I seem to still be booted under OSX (from my internal HD), as normal. I have also tried the other two ways to boot from the eDrive, as described at:
http://www.micromat.com/index.php?option=com_content&task=view&id=117&Itemid=68
In every case, after a reboot, I seem to be running the standard OS. I say this because the functions to test/repair my internal HD still indicate that they cannot be run because I'm booted from there.
Any ideas on what is wrong ... or things I can check?

Great news, thanks!

Similar Messages

W541: Cannot boot from USB created with Windows 8 create recovery drive

Hello, I have just bought a W541, and want to install the supplied Windows 8 on an m.2 SSD.I created the recovery drive on a USB following the instructions in the User Manual, but the recover image procedure under Advanced Options cannot find the USB.During the re-image step, it fails to find a drive with a valid image.I've confirmed using the command window available under the Advanced Options that the USB is mounted Searching these forums, I found the following, which describes a similar problem for a T540:https://forums.lenovo.com/t5/ThinkPad-W-Series-Laptops/Lenovo-W540-won-t-boot-from-USB-flash-drive-ThinkPad/m-p/1500902#M39097 This implies that the USB should first be formatted with FAT32 before use, which cannot work, since FAT32 only has a maximum 4 GB partition, whereas when copied to the USB, the Windows 8 recovery drive occupies nearly 10 GB. Is it possible to specify the boot order from insde the BIOS? I could only find an entry under Security about UEFI boot enabling, nothing about the boot order. Can anyone help?Paul

Hello Z, thanks for the reply. I tried another USB drive, and created a recovery drive, as before.This time it was able to detect the presence of the drive when I tapped on the Enter key when starting up, followed by the F12 key. However, there are still problems when I clicked through the options:Choose the languageChoose your keyboard layoutTroubleshootAdvanced optionsSystem Image Recovery At this point I am offered the option Windows 8.1.When I select this, it indicates it is scanning for system disks, and then displays the the pop-up window "Re-image your computer": "Windows cannot find a system image on this computer" Why does this happen if it detected that there was a Windows 8.1 installation on the USB? I've spent a whole day now on this. Luckily, if I can't solve it, the machine is new and I can send it back to Lenovo, and ask to have it re-imaged with the downgrade option to Windows 7.

Cannot boot from osx or cd, help

Hi,
I have a problem. My macbook 5.1 boots only to windows, not to cd or osx. I am not sure what has happened but I think I installed the latest security update. I have a backup with time machine (osx) and vista with windows backup. I can wipe the whole disk clean (I do this only if I am absolutely sure it will work, CD is now unresponsive, what about if network fails...).
However, I cannot boot from CD, to verbose mode or to single user mode. None of the keys work (eject, c, s, v, cmd+c, cmd+v, cmd+s) anymore at startup. My installation dvd is stuck into the cd-rom. The eject button does not work in windows (otherwise the vista works perfectly). Also the refit screen has disappeared.
This problem is caused (to my knowlege) due to following actions:
1. security updade => failure to boot osx (hangs to apple-logo and shuts down)
2. recovery from time machine to 2 days old configuration (last known working)
3. current status, no cd, osx or startup buttons
This is my work computer and I need the linux (osx) part on monday. Please help.
Juha
Technical details:
- refit
- osx leopard
- macbook 5.1
- vista created with bootcamp
- timemachine 500Gb

I got the problem worked out. Now that I have the possibility to boot from cd I used the recovery from timecapsule again. Now it worked more properly. There is some issues with some programs and data (missing), but thats another story.
Last time I left the recovery program calculating the space needed (step 1) overnight, as takes a lot of time. I finished the step 2 (choose recovery date and copy the files) in the morning. I was not at the computer when it did the thing and I only saw the text 'recovery complete'.
Apparently there is a 'feature' that if you lose the connection between steps 1 and 2, the recovery program copies the network path that is empty (connection lost -> empty path). The program thinks everything is copied and gives 'recovery complete' message.
The problem is now mostly solved, some programs are not recovered. This is seen as question mark icons in the tray. Overall I have succesfully recovered from the latest security update.
Juha
P.S. My original login name has disappeared from this forum. I am the same guy as Dv3. Could some admin mark this as solved.
Message was edited by: dve_

CDBOOT: Cannot boot from CD - Code: 5

When I attempt to boot from my Windows 7 install disc, I get this message on a black background:
CDBOOT: Cannot boot from CD - Code: 5
I'm using a late-2008 13-inch aluminum MacBook running OS X 10.7.
I've attempted burning the install .iso file multiple times (creating a couple of useless DVDs) at the slowest speed possible (which seems to be 2.4x, according to Disk Utility), and that has not solved the problem.
I haven't been able to find any help on this issue for a Mac user who doesn't already have Windows installed. (There seem to be solutions for people who are already running Windows).
Can anyone help?

Hi,
I had the verry same problem and I did multiple things I thought that could fix this problem.
Point one, the burning speed has nothing to do with the quality of your boot disk, you only have to lower burning speed if your burning process fails. So remind this for future burning problems.
1: I did the Lion software update.
2: I got another .iso file, burnd it and made a new partition in bootcamp and ran the setup again.
This time it worked really fine. But I'm not shure wether it was the SU or the new .iso... I checked the SU summary for the lion system update, but there was nothing to find on a boot camp bug and since they've improved boot camp it should work better
I have a 27" imac with the 2TB drive and Solid state so I was thinking that maybe it depended on which fysical drive I made the firtual bootcamp drive. But I tested the new W7 Boot disk on both fysical drives and it worked on both.
UPDATE: I found the reason... I compared the two copies of windows 7 boot disks and the one that works had a different name... Your boot disk should be called "CD_ROM" if not, the bootsequence will not recognize your DVD as a CD which appears to be nescesary for the installation process.
Sorry for the incomplete english, I'm from Belgium.
Message was edited by: Lonely Alien

Satellite M45: Cannot boot from CD-ROM or HDD

I'm getting the following messages...
WHEN BOOTING FROM HDD: "Invalid partition table"
WHEN BOOTING FROM CD-ROM: "No Bootable CD in ATAPI CD-ROM"
Consequently, even though I have the recovery CDs the computer cannot read them.
I tried changing boot order to no avail. Created a Bart's bootable CD which works in my other computer but not in this laptop. Are there special drivers I need for this CD-ROM?
I am at wits end on this one.
Thanks

Hi
I think your partition on the HDD is corrupt and therefore you cannot boot from the HDD.
In such cases the HDD should be completely formatted and then you could try to install the OS.
It seems also that your drive cannot recognize the bootable CD (WinXP???) and therefore its not possible to boot from the drive.
Well, its really stupid situation :_| really stupid!
However, did you try booting from other CD? For example original Microsoft Windows CD?
If not I would recommend to do it and possibly the drive will be able to read the other CD.
If not so I think the drive must be checked. Possibly its also corrupt.

Satellite A200 - Cannot boot from Recovery disk - code 1

I have Vista business and my laptop is currently running slow and is full of rubbish.
I have in the past used my recovery disc to completely re-install vista and start from a fresh version.
However, i have tried this time and it says that it cannot boot from cd - code 1.
Can someone tell me what this is and how to re-install vista?

Hmm... so its definitely not a ODD issue but there is something wrong with the shipped CDs. From my knowledge this error would appear if the CD would NOT be bootable!
Its strange for me that this notebook has been preinstalled with the Vista business.
Usually the notebooks are preinstalled with Vista Home Premium and usually you have to create the own Recovery disk using the preinstalled tool called Toshiba recovery Disk Creator.
Anyway, if you are not able to boot from these disks then you would need other disks.
You could order it from the ASP in your country or from this page:
https://backupmedia.toshiba.eu/landing.aspx
Cheers

New Macbook pro shipped with Lion, cannot boot from SL CD

I have a brand new Macbook pro 17" - shipped with Lion, cannot boot from snow-lopard disk - tech said I would be able to downgrade. I cant because if I try to boot from the CD it just beeps 3 times. Boots just fine from a Lion startup disk I created first. What the heck is going on here? Very upset that i cannot reach apple support in the evening any longer. If anyone can help it would be awsome. Tnx good prople.

Hi Paul,
Just a quick question, are your Fn keys working properly and the 2 fingered scrolling?
I've done much the same with the help of 2 Apple Geniuses who found me an original 10.6.7 install disk for a my new macbook pro.
It installed OK but... Fn keys don't work apart from F3 and F12, the rest give an error sound. 2 fingered scrolling on the trackpad doesn't work either.
Mine was a custom build 15" with hi res glossy screen - I wonder if they've put in the newer wired keyboard mentioned here:
http://support.apple.com/kb/HT4809
or, if my problem relates to being on 10.6.7...
Any info would be gratefully received.

Portege Z830 - cannot boot from DVD

I have a Portege Z830-11F. I upgraded my machine to Windows 8 and but i didnt like it. So i decided to make a clean setup of Windows 7.
I downloaded the .iso file from internet and burned it to a DVD.
I plugged in my external DVD player, restarted, entered BIOS and changed the boot order and restarted again.
All went well and i was able to install Windows 7.
But i didn't had the drivers, (thought the OS would recognize the LAN driver at least, i was mistaken)
So i upgraded to Windows 8 again (without restarting) just to download the drivers for Windows 7.
I did so, but now i cannot boot from the DVD.
When i enter the boot order section, sometimes the DVD is listed, sometimes not.
In both cases the machine boots to Windows 8 straightly, does not allow me to boot from the DVD.
The strange thing is i was able to boot from the same DVD in the first place.
What can i do to boot from the DVD?

At first I must say that I dont understand why you didnt create recovery media before you have changed anything. Using preinstalled Toshiba recovery media creator you could create recovery USB and the whole situation would be not so complicated. This recovery image is activated but now if you install own OS version you will not be able to use product key that you got with your notebook.
Anyway, now perform complete Win8 shutdown and after doing this start notebook and use F12 to enter boot menu. Of course your external DVD must be connected before you start your notebook. it can be that external drive will be listed on USB boot option like on my U940.

[solved] cannot boot from dd usb and cannot install 64 with unetbootin

hi,
been trying to install arch for almost 24 hours now. i just cannot manage to setup USBs to boot from.
first i was using unetbootin, but when the device not found error came up i tried using the methods recommended in the wiki. however, my hp elitebook 2540p cannot boot from the usb created using dd or imagewriter. so i went back to unetbootin and figured out the error was that the syslinux.cfg file needed to have ../../ replaced by archisobasedir=arch archisolabel=KINGSTON. now however, i cannot seem to figure out how to install a 64 bit system. when i run pacstrap all packages have i686 at the end, which i assume means its the 32 bit one.
help
EDIT: ok i have now used 3 different USB sticks and run
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
on them. plugging them into the 2540p the laptop just wont boot. it wont get past the first hp screen, where i normally press esc to enter the menu so i can choose boot options. the usb just blinks and nothing happens. this same problem happens with imagewriter in windows.
Last edited by iOfWhy (2012-07-29 13:01:10)

McDoenerKing wrote:Was the usb stick mounted, when issueing the dd command?
Did you use "of=/dev/sdx1" instead of "of=/dev/sdx" for the dd command?
Which image did you use?
i wrote exactly
sudo dd if=~/Downloads/archlinux-2012.07.15-netinstall-dual.iso of=/dev/sdd
as mentioned in the edit above, the computer wont get past the hp screen where one gets the option to press the esc key... the usb just blinks and nothing happens...
EDIT:
no the usb was not mounted...
the image was checked with both sha1sum and md5sum...
EDIT2:
ok so i think i am in... i reformatted the usb with fat filesystem, and then went through the second instructions from the wiki, ie installing "Without overwriting the USB stick"... But i am still wondering why i couldnt just do the normal dd method. Is it that the hp bios cannot read certain filesystems?
Last edited by iOfWhy (2012-07-28 13:39:40)

Help: Cannot boot from leopard disc anymore, everything else fine

I was working on an ibook and messing with it in firewire mode and was going to install leopard on it that way from my macpro. (just letting you know the context)
I tried to restart my machine(mac pro) and boot leopard both by pushing C and by running the installer.
I get the "You need to hold the power button panic message" everytime I do this. I unplugged external devices and tried this also and it has the same problem.
I cannot boot from the dvd anymore. If I eject the disc, osx loads normally.
Any ideas what I can do? (I have tried safe boot, pram clearing and hold option on boot to check options)
Here is the kernel panic when it finally loads into osx.
here is the kernel panic log when it reboots into OSX
Sat May 17 14:13:09 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x894ec373, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00df8000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0a5a1004
CR2: 0x00000018, EBP: 0x817c3bc8, ESI: 0x0a4c5c00, EDI: 0x0a4c5c00
EFL: 0x00010246, EIP: 0x894ec373, CS: 0x00000008, DS: 0x0a3c0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x817c39d8 : 0x12b0e1 (0x4555b4 0x817c3a0c 0x133238 0x0)
0x817c3a28 : 0x1a7bed (0x45e568 0x894ec373 0xe 0x45dd24)
0x817c3b08 : 0x19e517 (0x817c3b20 0xa83c980 0x817c3bc8 0x894ec373)
0x817c3b18 : 0x894ec373 (0xe 0x48 0x10 0x10)
0x817c3bc8 : 0x894db540 (0x0 0xa83c980 0xa4c5c00 0x1)
0x817c3c08 : 0x78d45139 (0xa4c5c00 0x1 0x0 0x13)
0x817c3c68 : 0x78d3e940 (0xa4c5c00 0x2407 0x817c3d2c 0xa4c5c00)
0x817c3c98 : 0x40c515 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3ce8 : 0x437535 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3d48 : 0x18c8aa (0xa4c5c00 0xacd8130 0x0 0x0)
0x817c3db8 : 0x12d165 (0xa525c78 0xaa76b90 0x817c3df8 0x11ee04)
0x817c3df8 : 0x126247 (0xa525c00 0xa2f9254 0xaad84b0 0x0)
0x817c3f08 : 0x196afc (0x817c3f44 0x0 0x0 0x0)
0x817c3fc8 : 0x19eb34 (0xab382a0 0x0 0x1a10b5 0xa63f208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff378
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x894d8000->0x89704fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x78cc5000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000
com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000->0x78d51fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)

I really appreciate everyone's help.
I am certainly not above taking the machine in but I will say this.....
I have been building and working on PC's for 15-20 years. I have never once used or had the need for a repair shop. It is my hobby. I recently switched to osx to give the mac a try and I love it.
I will say that vista/xp has four times as many problems but at least i can fix whatever comes my way hardware or software.
Any more ideas how to settle this without making my first trip to the repair shop ever?...
Chad

I cannot boot from HDD nor CD/DVD drive - Satellite C

I want to recover my laptop & i need to boot from cd.
I pressed F12 first time & boot from cd but i discoverd that i have put another cd just when i restarted (correctly) i could not boot from cd neither hdd.
When i log in bios hdd was detected but not available in boot priority menu. Just network adapter was there & now i cannot boot from hdd nither cd/dvd. Bios version is 1.30
PLEASE HELP ME

> When i log in bios hdd was detected but not available in boot priority menu. Just network adapter was there & now i cannot boot from hdd nither cd/dvd.
Does this means that neither HDD nor CD/DVD drive appears in the BIOS boot option?
Strange what notebook model do you have?
Did you try to set BIOS to default?
If not do this (press F9 and save the changes in BIOS)

Win 7 pro installed on hp touchsmart 320-1030, the machine cannot boot from installation DVD. Assist

I have installed Win 7 professional on hp touchsmart 320-1030 with an OEM DVD to overwrite Win 7 premium preinstalled from factory.
I want to reboot the machine with the same DVD after completing the installation, to test for possibility of reimage in case of crash. Although in bios, I specify cd\dvd as firts boot media, the machine cannot boot from installation DVD. I have 20 machines that behave this way. Can anyone assist?
Note: I had to delete all partitions on the PC before doing a fresh installation of Win 7 pro as Premium can not joing domain.

Hello,
So, you installed Window 7 Pro with a DVD, you boot with it to install the O.S, and now it does not work?
Have you tried to load the BIOS default values or even updating the BIOS?
If it had work before, cant understand why it does not work now...
Let me know.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Cannot boot from DVD since 10.4.6 update.

My Quad cannot boot from the Superdrive at all.Upon updating I decided to repair permissions from the DVD but everytime I got to the Apple logo the fans powered up,full tilt. I had to turn the Quad off from the power button and start up holding down the mouse, in order to eject the DVD.
As far as I remember, I allowed the computer to start up twice, and disconnected all peripherals whilst updating.
I've tried zapping the pram and resetting the nvram to no avail.I've inserted Disk Warrior and that will not boot. The computer runs fine from the HD (although there was one occasion when, briefly, a small OS9-style Mac monitor appeared with a question mark, then made way for a proper boot), but I'm really concerned at this problem. I do not want to wipe the system drive and start from scratch,since I've only just finished migrating a whole buch of software from another G5, and I have TV job looming.
Incidentally, both my other G5's and Mac Mini updated with no perceptable problems. Can anyone shed any light on this and, perhaps, offer a solution (other than a wipe ! ).
Thank you.
G5 Quad 2.5,G5's DP 2.5/2.0,Mac Mini Mac OS X (10.4.5) MOTU 2408's Mk3x3,24i/o,Hammerfall HDSP 9652x3

Any installation can theoretically cause harm. If you aren't backed up, you may be forced to use Target Disk Mode if you can't boot a DVD, or an external DVD burner that supports booting. Both LaCie and Otherworld Computing have external Firewire DVD drives that support booting. Target Disk Mode is described here:
http://docs.info.apple.com/article.html?artnum=58583
Fortunately when you boot via Firewire or use Target Disk Mode, you bypass the hard drive's bootloading software, which you don't when you use the internal optical drive.

Cannot save in newly created folders

When I connect to the SMB server thing, for some reason, I cannot save to newly created folders that my co-workers make. With I right click on the folder that my co-worker created, it says "You have custom access". And I cannot save my Indesign files in that folder. But when I create a folder, everyone is able to save in that folder. When others create a folder, they are able to save in it as well, except for me. This has never been an issue before until recently.
Do I have permission issues? I ran Disk Utility to fix my permissions but no success. Help please. I just want to save my Indesign files to the server for everyone to access.
The server we are using is the Mac Mini Snow Leopard server thing.
Thanx!

have you tried shutting down your mac, restarting and trying again with a newly created folder. do you have the same issue then?

Satellite U925t cannot boot from USB

Hi
I cannot boot from USB flash drive on Satellite U925t. I use bootable USB flash drive inserted (Hiren Boot 15.2, sure booted on another laptop), restart the system. When the splash screen is displayed, press F12 to access the boot menu, selecting USB - but laptop no boot from USB.
Please, Help me.
Thank you very much

From within Windows, try holding SHIFT when you select Shut down. Is there any change then?
Also, try entering the UEFI settings, disabling Secure Boot, and changing UEFI to CSM.
- Peter

Cannot boot from newly-created TTP eDrive

Similar Messages

Maybe you are looking for