Cannot boot iMac G5. Freezes on startup.

Hi! I'm having a huge problem with my iMac G5 powerPC.
I've bought it secondhand about two years ago. Upon checking the serial code I found out my computer was produced mid- 2005. The previous owner installed a newer OS X version, which I assume was Leopard.
About a week ago my computer started shutting down at random. After startup it would work for about 5 - 15 minutes before losing power again. It wouldn't feel hot and I could power it up again right away.
This went on for about two days, and now I'm completely stuck. When I press the powerbutton now, it usually freezes at the white Apple logo with the spinning gear underneath it. Unlike the many posts I've read about this, my spinning gear doesn't freeze, but just keeps on spinning forever... The longest I've let it sit like that is for about an hour. However, sometimes it passes this stage and freezes on a blue screen with the cursor in the left top-corner.
I've started it in single-user mode and used fsck. It made a lot of noise and displayed "***** FILE SYSTEM WAS MODIFIED *****", but right after that it shuts down again... I've tried this three times now.
Resetting NVRAM / PRAM didn't fix it. Resetting open firmware didn't fix it.
It won't start in safe mode either.
I doubt it's the powersupply, since it can run for hours if I don't touch it, and I've tried multiple outlets.
I've heard of reinstalling OS X while keeping my data, but I suppose that's impossible for me for I didn't get an install disk when I bought it.
I'm at loss! Does anyone have any suggestions or ideas?
Thanks in advance!
Lillian

I've started it in single-user mode and used fsck. It made a lot of noise and displayed "***** FILE SYSTEM WAS MODIFIED *****", but right after that it shuts down again... I've tried this three times now.
Could be a bad harddrive. Replaceable. or get an external drive.
There have been a lot of hardware problem with early iMag G5's. Capacitor problems.  Power supply.
You may be able to get a restore cd from apple. ask for leopard.
10.4 & 10.5 available from Apple by calling 800-767-2775 on January 20, 2013.
https://discussions.apple.com/thread/4720126?tstart=0
I'd start by getting a dvd from apple.
You need an external Firewire drive to boot a PowerPC Mac computer.
I recommend you do a google search on any external harddrive you are looking at.
I bought a low cost external drive enclosure. When I started having trouble with it, I did a google search and found a lot of complaints about the drive enclosure. I ended up buying a new drive enclosure. On my second go around, I decided to buy a drive enclosure with a good history of working with Macs. The chip set seems to be the key ingredient. The Oxford line of chips seems to be good. I got the Oxford 911.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

Similar Messages

  • Imac occasionally freezes on startup

    Old imac 333 MHz (it's not mine) running OS 9.2.2.
    Sometimes when booting up it freezes at just the point when the desktop items start to appear. It shows the drive icon and screen picture, but the items on the desktop do not appear. The mouse cursor is still active, but you cannot click on anything. The keyboard does not respond when you try to do something such as get info on the hard drive. I recall doing something with the keyboard though that indicated it is still working (and it does work when you boot and when it does succeed in booting normally), just that the cmdctrlesc doesn't do a restart so you have to power off at the wall.
    This doesn't happen each time so it's a bit puzzling.
    I've just rebuilt the desktop so I don't know yet if that has cured it. Disk First Aid 8.6.1 didn't report any issues. Could this in any way be due to an old PRAM battery (please, let it not be since I hear they are a bit of a bear to replace in the old imac)? Any other ideas?
    Brian

    Did this problem start recently? If so, what did you do just before the problem started? Did you install any new programs? I don't think it's the PRAM battery. There is a way to check though. Okay, start up your iMac and go to the Date and Time control panel and set the time, date, month, and year (Make sure you set the year because it's the main component in this experiment) Now, shut down your iMac and pull the power plug. Wait a few minutes and plug it back in. Now restart your mac and check the year. If it's gone back to the 1960's or 80's, you have a dead or low PRAM battery. Change it immediately. If the year didn't change, then your PRAM battery is fine. Try this and tell me whether your PRAM battery is dead and answer my questions above.
    Thanks

  • My iMac keeps freezing on startup

    For about two weeks my iMac which I only bought in October of last year keeps freezing on startup after I sign in. I have tried the cmd-alt-p-r about 4 times. It works for about two days and then starts freezing again. I need assistance please.

    Go step by step and test.
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Startup Manager to select Startup disk.
    http://support.apple.com/kb/HT1310
    Reinstall OS X
    http://support.apple.com/kb/PH13871

  • My iMac 24" freezes on startup and then works

    Hi! My iMac has a startup problem: It freezes on startup around 5-10min and then works again. Sometime the desktop is loaded and sometime it only shows the blue screen. I can move the mouse cursor but the click doesn't work. I backup files with the time machine and reinstall the OS but the problem still exists. I run AHT (extend) and the result is OK, no Hardware problem. Anyone knows how to solve this problem? Thanks in advance. TW

    More issues since I last posted:
    It's running, very poorly, but am trying to upload an MP3 to soundcloud.com and the upload keeps freezing. It's nothing to do with my Internet connection either.
    Quite honestly I think my iMac is on its last legs
    I really need this running as smoothly as quickly as possible as my partner has recently been made redundant and needs the mac so she can look for jobs. This is very inconvenient :/

  • Cannot boot iMac G5 from original OSX 10.4.2 CD...

    Hi,
    My iMacG5 is currently running 10.5.8 and I want to reformat it. I cannot reboot or even mount the original OSX cd that came with it which is 10.4.2
    Holding down 'c' or 'option' key cannot work as the cd is ejected and when i log in the cd does not mount and is also ejected. cd is good as i can mount it on another mac. CD/dvd reader is good because i can read other cd/dvd
    any idea?
    thx
    JP.

    Hi
    well managed to partially solve my problem after... after visiting an Apple Store in town and talking to a very useful techie staff
    I used my other imac with the OSX 10.4.2 and started it in target firewire mode and booted my old imac with S key (and yes I did manage to find a 400 to 800 firewire cable...).
    Worked like a charm and was able to remotely reinstall everything.
    Still a problem with the superdrive though because although it can read cd/dvd it cannot boot from bootable ones...
    JP.

  • Hello, My Imac is freezing during startup.

    It chimes and bigins loading. The spinning circle freezes after a few moments. It is able to boot in safe mode. Using command v during startup this is the last line displayed "GFX8: family specific matching fails". Also, this Imac has the infamous overheating graphics card problem.

    Have you attempted Disk Repair in Utilities? Are you still using 10.5.8 as your profile suggests?
    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • Consistently freezes on startup

    I have had this problem for a while, even before I upgraded from Leopard to Snow Leopard. Every time I start up my computer, the computer freezes. If I don't touch the mouse during the startup, it freezes at the gray screen with the wheel. If I wiggle the mouse it waits until the desktop pops up to freeze. After a forced restart, the computer it fine. It is just rather annoying that it does this. The only problem found when I run disk utility was this:
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    I have heard that you can uninstall remote desktop to fix this, but when I use spotlight to search, nothing shows up for Remote Desktop.

    My iMac was freezing on startup--gray screen with the apple logo then freeze. I also found that it wasn't going to sleep--the screen would sleep but the computer would still be running.
    I tried everything to solve it, from starting in safe mode to repairing the disk and disk permissions to reinstalling 10.6. I checked my startup folder and nothing was there.
    I simply unplugged my iPhone dock that I had plugged into a USB port on the back.
    That seems to have been the problem. Whether it was the dock itself or something is wrong with the USB port, my iMac now starts up and shuts down without incident (and fast too).
    Also, I have found that the system will sleep.
    So, I guess unplugging a peripheral solved my issue (so far).

  • Unplugging peripheral solved my freezing on startup/not sleeping problem

    I just wanted to give a heads up to those that are having problems with 10.6 freezing on startup or not going to sleep.
    My iMac was freezing on startup--gray screen with the apple logo then freeze. I also found that it wasn't going to sleep--the screen would sleep but the computer would still be running.
    I tried everything to solve it, from starting in safe mode to repairing the disk and disk permissions to reinstalling 10.6. I checked my startup folder and nothing was there.
    Before doing an archive and install, I simply unplugged my iPhone dock that I had plugged into a USB port on the back.
    That seems to have been the problem. Whether it was the dock itself or something is wrong with the USB port, my iMac now starts up and shuts down without incident (and fast too).
    Also, I have found that the system will sleep.
    So, I guess unplugging a peripheral solved my issue (so far).
    Now, when I want to update my iPhone, I simply plug it into the keyboard and unplug it when I'm done.

    Several things it could be, but I'd suggest a new hD to start with...
    http://eshop.macsales.com/search/pata
    Then a Fresh install of OS9.

  • Freeze at startup, cannot boot and access bios?

    Guys, I'm in very weird situation. After resize one partiion in my hard drive (using Gparted), at startup, I press ESC to access the BIOS options menu, following info displayed on screen Processor Type: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHzProcessor Speed: 3200MHzL1/L2/L3 Cache Size: ...Memory Size: 4096 MB DDR3Channel 1 A: XMM1 4096 MBBIOS Revision/Date: v80.05 02/05/2015 Press the Esc key for startup menu Then the computer freezed, cannot boot to my OS (Linux Centos 7), I press Esc key but nothing happened. I've tried to reset the BIOS by removing the jumpers and CMOS battery. It works (OS loaded successfully) , but after rebooting, the same problem occur. I'm very confusing. I just bought this desktop recently. Please help me to figure this out. Thanks.  

    I would suggest doing what is known as a *Safe Boot* on your MacBook. To do this, hold down the shift key on your keyboard during startup. Among other things, this forces a check of your hard drive's directory, which is equivalent to using *Disk Utility* to repair the disk. It may or may not be successful. Note that the Safe Boot process takes a while. Keep holding down the key.
    Best of luck.

  • My G5 iMac cannot boot up from its hard disk

    My G5 iMac cannot boot up from its hard disk - I get the alternating Mac OS folder and the ? Folder which I understand means the system cannot be found.
    On recommendation from a friend I tried replacing the battery - no difference.
    However, I can boot up from the CD/DVD drive from the OSX installer disk, DiskWarrior, Drive Genius and Techtools Pro. But none of these utilities can see my hard disk to see if it needed repairing.
    In fairness at one point DiskWarrior did see the drive and I was able to replace the directory safely. However, on subsequent reboots nothing can see the disk.
    Suspecting the hard disk I bought a new one and a USB/SATA casing to mount the old drive in to see if I could get anything off of it. The good news so far is that the old drive (now mounted in the new USB casing) can be seen and read on my daughters iMac. So all my information is safe and also now backed up.
    Having installed the new disk I found it also cannot be seen by any of the above utilities. I have since formatted it in the USB casing and put it back in the iMac but it still cannot be seen.
    As a test I installed a new system on an old 40Gig Lacie Firewire drive attached to my iMac. This works and boots ok - sometimes.
    I am now experiencing the necessity to force shutdown and restart from the startup button several times before the external disk is recognised. And most times it freezes after 30 minutes or so.
    I might also add that after some force shutdowns/startup I get little or no chimes. And sometimes when trying to reset the PRAM get no second chime. On other occasions I do.
    Now I am totally stuck and wondering if anyone can throw some light on why my iMac can boot up from a variety of CD/DVD utilities and sometimes an external Firewire disk but not from its own hard disk which, as I have already said, can be seen on my daughter's iMac but not by mine, so its not the disk.
    Does anyone have any suggestions at all before I bite the bullet and take it in for a diagnosis and repair (depending on cost).
    Thanks

    Could be the logic board, in which case you would need to take it in. Since the drives are good, and the directory was repaired, the logic board is about all I can think of.

  • IMac freeze after startup, works fine in safe mode

    Hello, my Mid 2010 iMac is freezing  about 3 minutes after startup. Ive tried booting from the instal disk and repairing it but it didnt work. In safe mode it works completely fine. It similar to some other peoples problem but i was hoping someone could help me, my applecare literally just ran out like 3 weeks ago.

    Hi baltwo,
    Im sorry but Im new to the community and I don't know how to address users directly. Hence intruding.
    It would be kind of you to shed some light on the matter.
    I'm running lion 10.7.5 and followed similar procedures but mail downloads every mail again after cataloging and indexing my earlier(snow leopard 10.6.5) mail. More details at https://discussions.apple.com/thread/5373643
    It would be great to find a solution as I'm struggling since two weeks.
    Thanks,
    Abu Suda

  • Imac freezing on startup, fine in safe mode

    Hi there - apologies in advance if I just need to be directed to another thread I've had a look around and can't find what to do now that I'm in safe mode.
    My Imac keeps freezing either at the password screen or as soon as I've logged in.
    Am I right in thinking that, given that safemode is working without problem, the issue is probably software?
    One other thing that might be relevant, I am currently trying to do a time machine backup but it has been stuck on Preparing Backup for about 15 mins now.
    I need advice on how I isolate the issue.
    Many thanks.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • IMac A 1200 freezes on startup

    iMac A 1200 freezes on startup and screen gets multiple lines on it.
    Cannot start up even from Snow Leopard DVD or external backup drive.

    Check the Repair extension programs and look for your number. Whether you qualify also depends on how old your computer is. The extension cuts off three years after the original purchase date, but they have been known to make exceptions.

  • Imac freezes on startup grey screen and really loud fans

    My Imac G5 non intel 20" freezes on startup grey screen and really loud fans start and it won't boot. just have the logo on the grey screen.
    I've tried resetting Pram - think that was the right thing to do?
    I've tried disk utility, but it won't settle for me to choose the hard drive, it kind of sticks and keeps rotating the wheel.
    any ideas anyone?
    please help.

    Lots of things you can try - first, try resetting the SMU. Next, boot from your install disc, go to Disk Utility and try to verify and repair your hard drive. If that doesn't work, try running the Apple Hardware Test on one of your install discs.
    Also, depending on which model you have, you may be eligible for Apple's power supply or video and power issues.
    Please post back with results,
    Miriam

  • TS1587 My iMac 27" model mid 2010 cannot boot

    My iMac 27" model mid 2010 cannot boot , it shut down after apple logo running a while. It happened after I'd installed ntfs-3G and restart the system

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for