Cannot Boot Properly

Hello,
I experienced an internal hard drive failure two months ago and thus replaced it with a new 1TB hard drive. My macbook pro worked perfectly fine until yesterday when apps refused to open/itunes refused to play songs. I then decided to restart my laptop but my macbook have since then never booted properly. I tried booting in safe mode and it didn't work. I then went into recovery mode and tried to repair the disk but apparently the hard drive cannot be repaired. Should I reformat the hard disk and reinstall the OSX using recovery mode? I'm a bit weary of wiping my hard disk incase it turns out like my previous hard drive situation in where I was unable to reinstall the OSX because the hard drive started to fail.

UPDATE: I tried repairing the disk again before permanently reformatting the hard disk and it actually worked. I thus rebooted my laptop and it rebooted normally.

Similar Messages

Cannot boot from osx or cd, help

Hi,
I have a problem. My macbook 5.1 boots only to windows, not to cd or osx. I am not sure what has happened but I think I installed the latest security update. I have a backup with time machine (osx) and vista with windows backup. I can wipe the whole disk clean (I do this only if I am absolutely sure it will work, CD is now unresponsive, what about if network fails...).
However, I cannot boot from CD, to verbose mode or to single user mode. None of the keys work (eject, c, s, v, cmd+c, cmd+v, cmd+s) anymore at startup. My installation dvd is stuck into the cd-rom. The eject button does not work in windows (otherwise the vista works perfectly). Also the refit screen has disappeared.
This problem is caused (to my knowlege) due to following actions:
1. security updade => failure to boot osx (hangs to apple-logo and shuts down)
2. recovery from time machine to 2 days old configuration (last known working)
3. current status, no cd, osx or startup buttons
This is my work computer and I need the linux (osx) part on monday. Please help.
Juha
Technical details:
- refit
- osx leopard
- macbook 5.1
- vista created with bootcamp
- timemachine 500Gb

I got the problem worked out. Now that I have the possibility to boot from cd I used the recovery from timecapsule again. Now it worked more properly. There is some issues with some programs and data (missing), but thats another story.
Last time I left the recovery program calculating the space needed (step 1) overnight, as takes a lot of time. I finished the step 2 (choose recovery date and copy the files) in the morning. I was not at the computer when it did the thing and I only saw the text 'recovery complete'.
Apparently there is a 'feature' that if you lose the connection between steps 1 and 2, the recovery program copies the network path that is empty (connection lost -> empty path). The program thinks everything is copied and gives 'recovery complete' message.
The problem is now mostly solved, some programs are not recovered. This is seen as question mark icons in the tray. Overall I have succesfully recovered from the latest security update.
Juha
P.S. My original login name has disappeared from this forum. I am the same guy as Dv3. Could some admin mark this as solved.
Message was edited by: dve_

HELP CANNOT BOOT

ok, my mbp was working fine for a bit, but when i tried to use time machine it didnt work with error -43 "file not found". i figured it just wasnt installed properly. so i booted up my leopard install disc and did archive and install. well, about twenty minutes in to the installation it came up with an error, saying that it could not install "BSD" (i dont know what that it)". not thinking anything of it i just restarted and tried to install again. only this time, when it checked to see if i had osx 10.4 or later, it denied that i did. i suspect that the original installation was interupted before it could install a working os, because i cannot boot the os at all.
PLEASE HELP ME i cannot install a fresh os, i cannot boot the old os, and repair disc does nothing. i have no idea what to do.
thanks in advance

Well this sort of calls for extreme measures:
Boot from your Leopard Installer DVD. Proceed to the point where you select a destination volume. Select your desired startup drive and click on the Options button. Select the Erase and Install option then click on the OK button. Finish the installation.
This will erase everything on the drive. If you have data you need to recover, then I suggest you do that first. You will need a second Mac with Firewire. Use Target Disk Mode to access the drive on your computer and transfer your personal files to the other computer or to an external Firewire drive connected to the other computer.

T61 cannot boot from USB harddrive

My T61 cannot boot from USB harddrive. the drive have VID 058F and PID 6391, the drive is bootable on all other computers. What happened? The bios does not recognize the drive at all.

cwang36, welcome to the forum,
I've had some strange experiences with usb hard drives and would ask you to try the following; when you want to boot from the drive start your T61, go into the BIOS > Startup > Boot menu and you should see the option USB HDD with a "-" in front of it. If I am correct you should exit BIOS, (F10 save and exit), upon restarting enter BIOS again and go again to the Boot menu. This time the USB HDD entry should have a "+" infront of it showing that the drive has been properly recognised.
If my theory is correct, no guarantees, you can then exit Bios with F10 and hopefully boot from the drive.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

New Macbook pro shipped with Lion, cannot boot from SL CD

I have a brand new Macbook pro 17" - shipped with Lion, cannot boot from snow-lopard disk - tech said I would be able to downgrade. I cant because if I try to boot from the CD it just beeps 3 times. Boots just fine from a Lion startup disk I created first. What the heck is going on here? Very upset that i cannot reach apple support in the evening any longer. If anyone can help it would be awsome. Tnx good prople.

Hi Paul,
Just a quick question, are your Fn keys working properly and the 2 fingered scrolling?
I've done much the same with the help of 2 Apple Geniuses who found me an original 10.6.7 install disk for a my new macbook pro.
It installed OK but... Fn keys don't work apart from F3 and F12, the rest give an error sound. 2 fingered scrolling on the trackpad doesn't work either.
Mine was a custom build 15" with hi res glossy screen - I wonder if they've put in the newer wired keyboard mentioned here:
http://support.apple.com/kb/HT4809
or, if my problem relates to being on 10.6.7...
Any info would be gratefully received.

Macbook Pro4.1 Cannot Boot Up After Battery Allowed to Drain.

I’m hoping someone can help me troubleshoot some strange behaviour of my Macbook Pro4.1. It’s an early 2008 2.4Ghz Core 2 Duo. I’ve had this running perfectly for the past 2 months with an Apple 65W Magsafe Adaptor, although I recently got an 85w version so I’ve started using that for a bit. I recently read somewhere that it’s good to allow the battery run completely flat once a month or so, so I unplugged the adaptor last week and ran it off the battery for the afternoon. When it was almost done (10% charge left) I went for a shower and came back to find the Macbook powered down. I plugged in the Adaptor back in but I couldn’t get it to start.
I have to say at this point, that my 85w adaptor sometimes needs a wiggle at the magsafe end to get it to work. Despite this though I couldn’t get the green power LED to light or the Macbook to boot up. I then tried my 65W adaptor, which is perfect, and although the LED lights up (first green and then amber) the macbook just doesn’t power up with it. I tried the 85w one again the following day after leaving the macbook disconnected and battery removed overnight, and was pleased to find that it finally booted. Amazingly, despite having no power at all for the whole night it came back with all my applications running, safari tabs and the documents open! Anyway, I noticed from the menu bar that the battery was not charging and I couldn’t seem to get it to charge. I ran it all day and the system profile showed that the Battery was about half full and had a ‘normal’ condition with about 187 charge cycles. However I can’t run the Macbook off the battery. When the power cuts out from the 85w adaptor the whole macbook shuts down. The battery isn’t doing anything, even after charging all day and being half charged. What’s more neither of my 65w adaptors can start the macbook no matter how many times I try them. Only my 85w one can boot it, but it’s defective so very rarely seems to work. The 65W ones worked perfectly before,so I don’t know what’s changed.
I read the Apple guide to resetting the SMC and have now followed the procedure several times, but it hasn’t helped. I cannot boot the Mac any more. Does this Macbook come with an 85w adaptor or 65w? I’m confused because the 65w ones always worked until now. Also, the battery itself is only 60w.
I’m going to purchase another 85w Adaptor, in the meantime any advice would be very welcome. Thanks for reading!

Thanks again for all the input, very much appreciated.
So, in case of any misunderstanding, both my 60w Magsafe Chargers are perfect. I use them with other MacBooks. No problem. I also used them with this MacBook, prior to the battery going flat. Again, no issues. Despite that, even when I've completely removed this battery and tried to boot the Macbook up from just the chargers, nothing happens at all. There is no power. I've reset the SMC which is the obvious culprit. Still nothing.
The only charger I have which can start it is an 85w one. However that's defective, so I don't get a connection long enough to complete a bootup. The question is, is this normal? Should this MBP only work with an 85w and not a 60w?? And if that's the case, how come it worked on a 60w charger for so long? And why is the battery 60w and not 85w?
thanks again

Cannot boot itunes after 10.1.2 upgrade.

Hello there..I had itunes 10.1.1 running fine on my XP - apple updater told me there was a new version (10.1.2) so I upgraded...did the install and now I cannot boot itunes from desktop or anywhere else...tried uninstalling and reinstalling but no luck...no messages, no errors just...no itunes.
Do you think you can help or anyone else who reads this?

I Finally got mine working correctly. I have windows 7 64 bit. I uninstalled everything and reinstalled using the 64 bit. It works now. I don't know if the automatic update selected the 32 bit to update. I rechecked the system requirements, it looks like itunes no longer supports the 64 bit xp system--if that's what your is. I would look into that, and maybe downgrade to the olde itunes.

Mac pro cannot boot after upgrade to 10.8.3

My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
I am using a early 2008 Mac Pro

Can you boot into safe mode? http://support.apple.com/kb/ht1455
If not, how about Recovery? http://support.apple.com/kb/ht4718
If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

Cannot boot after recovering a FileVault 2 protected disk

I used Lion's new recovery HD partition to restore a four day old Time Machine backup. However, two days ago I enabled FileVault 2, which is probably the cause of the fact that I cannot boot my mac anymore. As the whole disk is locked, I cannot access the recovery partition either. Disk Utility of Snow Leopard install DVD doesn't support unlocking the partition, it is grayed out and therefore I'm not able to mount it. I honestly don't know yet how I can fix this problem. Can you help me?

Unlocking worked using the DVD, but I could never really make it bootable anymore. Reinstallation of Lion on the existing partition didn't work either. Just FYI, when trying to make the disk the startup disk it give me the following error: 'Building boot caches on boot helper partition failed'. The only solution that worked and was good enough for me was to delete the partition, reinstall lion and restoring time machine data on the new installation afterwards.

Curve 8320 corrupts OS periodically and then cannot boot (blinking LED only)

I have a T-Mobile BB Curve 8320 that I've had for about 9 months, and I have what appears to be a recurring problem.
Three times now, the phone has corrupted its OS, and it will not boot. Each time it does it, the symptoms are first the phone is non responsive, and just shows the spinning hourglass cursor. The last time it did it while in the Mail app, which is the one I use almost exclusively. The phone appears to lock up, showing the wait cursor indefinitely. This time I waited a half hour, and it was clear that it wasn't coming back. So I pushed the power button, and it shut down the phone. But then when I tried to turn it back on, the screen never came up, and it just blinked the red LED "forever." (It was about 18-20 hours before I got around to trying to reload it.) The first time this happened was when the phone was running the OS version it shipped with, which I think was 4.3, but I don't recall. But now it has done it twice while running 4.5.0.81, which is the OS distribution T-Mobile makes available for the Curve.
The first two times it did it, I used the application loader to wipe the device and reload the OS. When in this state, BB desktop manager doesn't see the device since it can't boot. But if you click through to the application loader, you can get it to load. (Or you can run the application loader outside of BB desktop manager)
This time, the application loader started up, offered the choice of what to load, and then proceeded into the next phases. Erasing the device succeeds, as does the next phase where it loads the OS. But then it gets to where it is loading application modules, with a progress bar for each module and one for the overall progress. It got halfway through the overall progress, and failed with an "unspecified error", suggesting to try again. I tried it three times, and it failed the same way each time.
After calling T-Mobile, they bounced me over to RIM, and the first guy had me go through the app loader again with the same result. When he started pursuing USB connectivity issues, I asked to speak to someone else. (There are other devices on this system, both mass storage and input, and none of them ever show connectivity issues. )
The second tech had me rerun the application loader, but this time only select the core OS, leaving out all the apps. This succeeded, and then he had me rerun it, loading the rest of the applications. This also succeeded.
But the problem I still have is this. There is no explanation why the phone corrupts itself every couple of months, or why loading the OS and the applications in one step failed to work _repeatedly_. I believe the device has a bad memory address, and the two step OS load simply danced around it. And it is that which is causing the phone to corrupt its own OS to the point that it cannot boot.
The tech tried to pass of the corruption due to loading third party applications, and while I can accept that a rogue application can corrupt memory locations that it has the ability to write to, I don't know if the BB OS/device uses any form of protected memory, or if apps are essentially unrestrained. The only third party applications I load on this are the Google app, with Gmail, and Opera Mini.
To be honest, if the BB OS is that fragile that I can't even load these two applications on it, I'll be trading it for a different email capable phone.
Anyway, I'm looking to find if anyone else has a phone that repeatedly gets corrupted so it can't boot, and requires a complete reload. Also, is there anyway to test the memory on the phone? I'm going to call T-Mobile back and try to get them to swap my phone, because I can't afford to spend three hours on the phone with tech support every couple of months when my phone dies.
thanks!

Thanks for the reply. Our cases sound a bit different. I seldom use Desktop Manager, as I sync through BES. I do use it for backup though.
But over the time my phone corrupting itself has happened, I've upgraded from BB OS 4.3 to 4.5, which required an update to Desktop Manager, and following that I upgraded to a new computer. So I've changed computers, BB Desktop software, and BB OS software, and the problem has happened across all of those changes.
You should have been able to restore the OS even if it was corrupt. Desktop Manager won't recognize the device if it won't boot, but application loader will still find it. The first two times I did it, I used instructions basically like this: http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry?page=4
But since then I've found I can just access application loader via BB Desktop Manager and do the same thing. I did notice when my OS reload kept failing this last time, that using application loader directly showed more of the failure message. It still wasn't anything useful, but when I reran the reload via Desktop Manager, I recognized the error was the same, but noted that I didn't see all of the output of the standalone application loader.

Mac Book fails to boot properly after EFI Firmware 27 update

hi
I have a strange boot issue having (tried) to install EFI 2.7 update.
When I restart the laptop, it 'chimes', displays a grey screen ... then chimes, displays a grey screen , ... for ever
I hit the bower (off) button for 5 secs or thereabouts, and restart ... same thing
I do this 4 times and finally it reboots.
But the EFI update still appears as needing to be installed (software update tells me it is not installed). Update history shows however that it IS installed.
I can go through this process any number of times ... I now have Software Update history showing quite a few installs opf the EFI 2.7 update.
If I just do a restart WITHOUT installing, I also go through the same fail to restart / fail to start / ... / eventually restart sequence.
So it seems now that the laptop will only start after 4 failed restarts and finally it starts ...
After starting it all appears to be perfectly fine.
Nothing strange in the console logs that I can see. The failed reboots don't seem to register in the console logs - I suspect that the failure to restart is pretty early on in the boot sequence, well before it tries to load any semblance of the OSX kernel. It is almost as if it is trying to boot from someplace other than the disk ... until eventually it gives up and tries the disk. (I have tried booting with and without network cable - no difference) I don't know enough about mac bootup sequences to know if there is some config/setting that is screwed up causing this odd behaviour. I sirt of feel it must be setup/software related, but could be wrong.
Odd.
Any ideas?
- chris

I have a MC721LL/A early 2011 15.4" MacBook Pro i7. After I installed this firmware update my Mail would not load saying the version I was trying to start was not compatible with the OSX version (not sure whether this was an OSX update issue which I think I did at the same time). But the biggest problem I have is that I cannot boot my machine. It boots to the Apple logo and then emits 3 beeps repeatedly. I am on vacation in Osaka, Japan and the Apple Store here told me after running some analytics that the logic board is not seeing the RAM. After reseating the RAM multiple times (both original and replacement DIMMS), it still won't boot. The Genius Bar guy said very nicely that it is out of warranty and needs a new logic board, costing over $500 and taking a week at the factory. He recommended spending the money on a new MacBook instead. Since my machine is 15 months old, I am not very happy about this. The machine was absolutely fine before the firmware upgrade. I will wait till I get back to the US and get a second opinion from my local Apple Store. I can't accept that a 15 month old MacBook Pro very lightly used can develop such a catastrophic failure.

Kernel Panic / G4 dp500 / Cannot boot currently

Machine Config:
10.4.8
G4 DP500
1.5 gigs ram.
Internal ATA133 PCI controller card (Sonnet)
Four internal hard drives. My current 4-drive configuration:
Three 200 gig drives are connected to the internal ATA133 sonnet card, and out of those three, just one was made to be bootable with 10.4.8.
The fourth drive (160gig) is connected to the on-board ata33 connector, and is bootable with 10.3.9 on it. Presently I cannot boot from either drive
I installed the Sonnet ata133 card three months ago to expand the drive capacity. I wanted to "see" hard drives larger than 127 gigs, which is the limit if using the onboard ata33.
Everything has been working fine for 3 to 4 months after I installed the Sonnet card, and three internal drives. But about three days ago, my computer was hard-frozen when I went to use it. No mouse movement etc. When I rebooted, I received the Kernel panic black screen with its resulting verbosity.
I had a spare internal drive laying around that was preconfigured with an OS on it. So fearing the Kernel panic was from the Sonnet controller card, I installed my spare drive to connect from the mother board ata33 connector. I was then able to boot from my spare. after that I was able to repair my boot drive that was attached to my Sonnet card. The one that was initially corrupted by the Kernel panic.
After rebooting successfully to m, I decided to leave my spare boot drive attached the on-board ata33 connecter (just in case the kernel panic happened again)
Well, it did happen again. And now I can't even boot from my spare now. Its as if the kernel panic is destroying the directories of my boot drives!
Specifically the volume header wraps.
In addition, I can't even boot from Disk Warrior or my OSX install disk. The screen just hangs at grey. So, I have no more spare boot drives available, and I cannot boot from cd/dvd. The cd/dvd drive is attached to the internal on-board ata33 like my spare is.
I know that heat will often cause a hard freeze. But will it also cause kernel panics upon reboot?
As it stands now:
When ever I try to reboot, a black screen will display unix command line text describing kernel panic and the last line is"
"Panic: we are hanging here."
This seems like a hardware issue. But why are my boot directories becoming corrupted? At this point, maybe its over heating. I have four drives now stuffed into the G4 with ribbon cables all over the place and a vent fan installed into one of the unused PCI slots.
I haven't installed any new hardware lately.
I upgraded to 10.4.8 and the panic still happens.
I have 30gigs of itunes, 20gigs of iphotos, 40gigs of imovies, 10 gigs of mail, etc. My back up system was using SuperDuper to copy my USER folder to another internal drive, so I know I have a backup, It's just that I cannot access it. If I can recover my data, I'm going to go out and buy a G5, transfer my data, and be done with it. If I can't recover my data, then I will be forced to live a life of quiet desperation. My wife will leave me if I've lost her itunes collection
BTW, what is a good program to back up to 8.5 gig DVD's? Can I make large 20gig .DMG files and segment then into 8.5 gig portions? I no longer want to rely on internal backup. I would feel better knowing that my back were on dvd's locked in my fire safe. When did I become so dependant on computers?!
Losing sleep.
Haifarmer

It may not help, but it's worth a try to reset the PMU. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
When trying to troubleshoot problems, disconnect all external devices except your monitor, kbd & mouse. Do you experience the same problems?
May be a solution on one of these links.
Troubleshooting
The X Lab (Troubleshooting & Maintenance of OS X)
OS X Routine Maintenance & Generic Troubleshooting
Prevent Mac Disasters
Kernel Panic
Mac OS X Kernel Panic FAQ
Mac OS X Kernel Panic FAQ
Resolving Kernel Panics
12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Cannot boot into Windows XP, should I replace hard drive?

THE PROBLEM: I have not been able to boot into or use Windows XP (SP2) for almost 3 years. I have been using Linux instead for 3 years and am using it now. The Windows Recovery process only half works, it works up until you have to boot up the computer from the hard drive. Then it no longer works. The computer will load the files from the TOSHIBA Recovery and Applications/Drivers DVD that came new with the computer onto the hard drive. But when you get to the point of booting off the hard drive, with newly added Windows & Toshiba files, nothing happens. It does not boot up into Windows XP. In fact I can see the newly added Windows & Toshiba fileson the hard drive when I boot into Linux (Live) off the hard drive.
THE HARD DRIVE (Specs below): I ran a SMART Data check using a Linux (Ubuntu) Disk utility on the hard drive and it passed everything except for Reallocated Sector Count. There are 20 bad sectors. I called the Toshiba 800 # on the DVD and they told me that the problem may be the hard drive. A new TOSHIBA Recovery and Applications/Drivers DVD costs $40. Toshiba also said there is no Windows XP Recovery Console on the DVD.
CAUSE OF THE PROBLEM: I think, and TOSHIBA agreed it is either the hard drive or corrupteD files on the TOSHIBA Recovery and Applications/Drivers DVD
POSSIBLE SOLUTIONS: I have found a couple of sites that seem to have instructions for making a Windows XP Recovery Console CD. And I have thought I might try to run some Windows XP Recovery Console commands from such a CD, such as fixboot, fixmbr, etc. The try to see if I can boot into Windows XP from the hard drive. If I can, then that might suggest he problem is corrupted files on the TOSHIBA Recovery and Applications/Drivers DVD. If I still cannot boot into Windows, then maybe I should replace the hard drive. This should be very easy to do.
QUESTION(S): Does anybody have any comments or suggestions? Does my approach sound good? Do you have any other suggestions?
I have a TOSHIBA Satellite L25 S1216 that I bought new in early 2006. It has a 40 GB (5400 RPM) Enhanced IDE (ATA-6) 9.5 mm height hard disk drive in it. User removable, i.e., it is easy to replace.
Thank you,
Bob
Solved!
Go to Solution.

My plan is to try to use the TOSHIBA Recovery and Applications/Drivers DVD to load the WIndows XP files onto the hard drive, then use the Windows XP Recovery console CD I downloaded from here
http://www.proposedsolution.com/downloads/download-windows-recovery-console/
by using commmands such as fxmbr, fixboot, etc to see if I can get the computer to boot up into Windows XP.
Good plan, Bob!
Description of the Windows XP Recovery Console for advanced users
A backup plan would be to obtain a Windows XP installation CD from eBay or wherever. They are super cheap now. Then you could install Windows clean and add the drivers and utilities from the website here. Or you could use it to repair-install Windows.
How to Perform a Windows XP Repair Install
You are entitled to activate Home Edition for free. I understand that even after Microsoft no longer supports Windows XP (in April), they will honor activation attempts.
I wouldn't mess with SSDs. And stick with IDE PATA drives. You won't need to worry about advanced-format technology since that didn't come along until the very recent SATA drives. Your BIOS should support 120GB (KB303013). Some here.
-Jerry

I want to start a new movie but iMovie is hung looking for an old file and says:"Without this file, the movie cannot play properly."

Hello!
I recently upgraded to Lion. Every time I start up iMovie, it asks if I want to go ahead and generate thumbnails. I say OK, then it alerts me that it cannot file the file IMG_0073.MOV. Then it says "Without this file, the movie cannot play properly." It gives me the option to either cancel or search for the movie.
I don't have the old file it's looking for. I simply want to start a fresh movie with new material but cannot get past this hump. Based on the little research I have done, some people experienced this problem because the files were in aperture at some point, which was the case for me before when I used iMovie. I have since moved forward only with iPhoto but perhaps it's hung on an old file format?
I tried taking another old movie and renamed it IMG_0073.mov to see if I could simply select it, give it what it wants and move on but it won't let me select the file for some reason. I also tried removing iMovie and downloading a fresh version but that didn't work either. My BF tried removing pfiles (I think that's what it's called? but again no luck)
Please help! I must get this assignment done for a class!

Hello!
I recently upgraded to Lion. Every time I start up iMovie, it asks if I want to go ahead and generate thumbnails. I say OK, then it alerts me that it cannot file the file IMG_0073.MOV. Then it says "Without this file, the movie cannot play properly." It gives me the option to either cancel or search for the movie.
I don't have the old file it's looking for. I simply want to start a fresh movie with new material but cannot get past this hump. Based on the little research I have done, some people experienced this problem because the files were in aperture at some point, which was the case for me before when I used iMovie. I have since moved forward only with iPhoto but perhaps it's hung on an old file format?
I tried taking another old movie and renamed it IMG_0073.mov to see if I could simply select it, give it what it wants and move on but it won't let me select the file for some reason. I also tried removing iMovie and downloading a fresh version but that didn't work either. My BF tried removing pfiles (I think that's what it's called? but again no luck)
Please help! I must get this assignment done for a class!

Help: Cannot boot from leopard disc anymore, everything else fine

I was working on an ibook and messing with it in firewire mode and was going to install leopard on it that way from my macpro. (just letting you know the context)
I tried to restart my machine(mac pro) and boot leopard both by pushing C and by running the installer.
I get the "You need to hold the power button panic message" everytime I do this. I unplugged external devices and tried this also and it has the same problem.
I cannot boot from the dvd anymore. If I eject the disc, osx loads normally.
Any ideas what I can do? (I have tried safe boot, pram clearing and hold option on boot to check options)
Here is the kernel panic when it finally loads into osx.
here is the kernel panic log when it reboots into OSX
Sat May 17 14:13:09 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x894ec373, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00df8000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0a5a1004
CR2: 0x00000018, EBP: 0x817c3bc8, ESI: 0x0a4c5c00, EDI: 0x0a4c5c00
EFL: 0x00010246, EIP: 0x894ec373, CS: 0x00000008, DS: 0x0a3c0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x817c39d8 : 0x12b0e1 (0x4555b4 0x817c3a0c 0x133238 0x0)
0x817c3a28 : 0x1a7bed (0x45e568 0x894ec373 0xe 0x45dd24)
0x817c3b08 : 0x19e517 (0x817c3b20 0xa83c980 0x817c3bc8 0x894ec373)
0x817c3b18 : 0x894ec373 (0xe 0x48 0x10 0x10)
0x817c3bc8 : 0x894db540 (0x0 0xa83c980 0xa4c5c00 0x1)
0x817c3c08 : 0x78d45139 (0xa4c5c00 0x1 0x0 0x13)
0x817c3c68 : 0x78d3e940 (0xa4c5c00 0x2407 0x817c3d2c 0xa4c5c00)
0x817c3c98 : 0x40c515 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3ce8 : 0x437535 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3d48 : 0x18c8aa (0xa4c5c00 0xacd8130 0x0 0x0)
0x817c3db8 : 0x12d165 (0xa525c78 0xaa76b90 0x817c3df8 0x11ee04)
0x817c3df8 : 0x126247 (0xa525c00 0xa2f9254 0xaad84b0 0x0)
0x817c3f08 : 0x196afc (0x817c3f44 0x0 0x0 0x0)
0x817c3fc8 : 0x19eb34 (0xab382a0 0x0 0x1a10b5 0xa63f208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff378
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x894d8000->0x89704fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x78cc5000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000
com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000->0x78d51fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)

I really appreciate everyone's help.
I am certainly not above taking the machine in but I will say this.....
I have been building and working on PC's for 15-20 years. I have never once used or had the need for a repair shop. It is my hobby. I recently switched to osx to give the mac a try and I love it.
I will say that vista/xp has four times as many problems but at least i can fix whatever comes my way hardware or software.
Any more ideas how to settle this without making my first trip to the repair shop ever?...
Chad

Cannot Boot Properly

Similar Messages

Maybe you are looking for