Cannot bring up the router (192.168.1.1)

Using the WRK54G V2 router - am not able to bring up the router when I call for 192.168.1.1 - I tried clearing the cache, I tried using different browsers (IE6, Firefox), I disabled the firewall, all to no avail: all I get is an error message that reads in part, "timed out." Does anybody know what is going on? Have others reported this problem?
Barry

When I go to edit my router settings by typing my IP into adress box, about 50% of the text doesn't even load. I have no idea what the hell is going on or how to fix it. .
examples:
http://img247.imageshack.us/img247/6240/08232006093217ir4.png
http://img183.imageshack.us/img183/4158/08232006093104fl4.png
I really need to forward some ports and I'm unable because of this. This was not happening about 3 weeks or so ago when I first installed the router. Please help.

Similar Messages

After a while, cannot connect to WRT320N through 192.168.1.1

I have a WRT320N with latest firmware 1.0.03.
Everything works OK other than the fact that after a while (hours / days) I cannot connect to the router through http://192.168.1.1 but I have connection to the internet though. If I restart the router, I cannot connect to it but after a while I can't do it again. When I try, browser stays for minutes and eventually gives me the "Page not found error". This is happening from any computer (I have 4 computers wired and 2 wireless). The wired computers are connected through a GbLan switch and they have different OS: Vista(x64), XP(x86), Windows Server 2003 (x86) and Windows Server 2008 (x64). The 2 computers wireless connected are Windows 7 (x86) and Windows 2000. From all of them I have the same problem and after restarting the router I can connect again from any.
This behavior had been in place from the beginning but not being under pressure because I rarely have to change something in router's settings, I did not report it in time and now it seems is out of warranty.
My question is if this is something that happened to others (but I was not able to find any similar reports) or is it something wrong with my router? As I said before, other than that, router is functioning without any issues.
Thank-you

Is someone using bittorrent or any p2p software? p2p software, downloading using torrent opens a lot of TCP port, hogging the router's resources. Thus, accessing the router's gui is sluggish or not even opening up.
Upgrade the router's firmware.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec *

There was a problem connecting to the server "192.168.1.3

'There was a problem connecting to the server 192.168.1.3 Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator.' - How to sort this out so I can connect to my NAS Drive via wifi?
I am running OS X Yosemite all though I had this problem also with the prevues OS.. I can't seem to connect to my NAS Drive any more via wifi at home. I keep on getting this message error. I have tried different things like trashing some of the Library Preferences suggested on other discussions and updated everything I can. I have also re started Finder (as previously that sometime worked) but this no longer a solution.
The server is working fine I can connect to it via remote website. I also I can see the server/drive and even wake it up but that is as far as it goes, soon after it is 'connected/woken up' I get this error messgae and I can't see any of the files etc. Please help, this is extremely annoying, I feel helpless, this is beyond my technical know how..

I have same problem. It started after i replaced my router (which was on 192.168.1.1) to new air port time capsule, which has different IP address. When i start chrome i have to wait half a minute to get this message. Then i click ok and after that everything is working. Until next time you restart the browser. What is happening here?

Problem with my linksys WRT120N i can't connect to the address 192.168.1.1

Hello friends
i need help cuz i can't connect to the address 192.168.1.1
i didn't change the address 192.168.1.1 to an other address but i can't connect to this last i want to change my options
i really need help plz

Make sure that the computer is connected to the router on the Ethernet port..Now,check the ip address on the computer....Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,Adjust the Browser Settings on the computer....Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...

I cannot bring up the menues that show the marquees. All I get is a setup for working with videos.... not photos

Am 100% a newbie with photoshop. I can organize the photos I have stored on my hard drive. when I go to select a photo to administer some treatments.... such as changing the shape, vignetting, etc.... I cannot bring up the submenu with the marquees that enable this activity. I have installed the disc twice.... need some advice/help....

Sub menu for the marquee tools hover over the tool in the tools palette or right click on it.

I cannot bring up the Java console from IE in WindowsXp

Hi Team,
My System contains Windows Xp as a operating System.
My IE is unable to dispaly the applet's.Although my IE tells me that I have JRE running (under IE / Tools / Internet Options / Advanced), I cannot bring up the Java console also.
I Checked in Control Panel/Java/show-console is activated. But i am unable to bring up the java console.
Thanks
T. Shankar Reddy

I got the solution. Now my application is runnig successfuly.
The problem is with J2SDK installation. I un-installed j2sdk1.4.2.08 and again I installed. then it is working properly.
Thanks
Shankar Reddy

My iPod Nano 3rd generation suddenly no longer displays the menu. The music plays but I cannot bring up the display

My iPod Nano 3rd generation suddenly will not display the menu. It plays as usual but I cannot bring up the display.

Hi b ellen,
Thanks for visiting Apple Support Communities.
See this iPod Nano Troubleshooting Assistant for some steps you can try:
http://www.apple.com/support/ipod/five_rs/nano3gen/
Best,
Jeremy

I get a prompt "the computer 192.168.1.70 is attempting to access nmbd on your computer"

I get a prompt "the computer 192.168.1.70 is attempting to access nmbd on your computer". This has happened before, different ip address, am I being hacked?

This is about SSDP (Simple Service Discovery Protocol) that is part of the 'Send Video To Device' service.
*http://en.wikipedia.org/wiki/Simple_Service_Discovery_Protocol
See also:
*[https://bugzilla.mozilla.org/show_bug.cgi?id=1111967 bug 1111967] - Add an option to disable SSDP in Firefox
<i>Please do not comment in bug reports<br>https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Wireless Router wrt120n - Cannot get to Administrative website 192.168.1.1

Hello, I've tried everything I know to do to get to the website but no luck as of yet. I began to upgrade my firmware but i was told that i have to be in the administrative tool to do so. HELP!

First, make sure you are connected directly to the router itself via network cable (e.g. Cat5). Don't attempt the firmware upgrade over wireless!
If you are using Windows, you can open a command prompt (Start menu, run CMD), then type in IPCONFIG. Look for an item that shows your Default Gateway. That will be the IP address you need to access the WRT120N.
When you have access to the log-in page, leave the username field blank and use "admin" as the password. You should then have access to the Administration section of the router.

Router 192.168.1.1 problem

System: OLD wirespeed router/modem combo unit with Ethernet connection to adjacent laptop running Win 7
Sometime ago I changed the DNS address on my computer to the Google DNS servers.
Tonight when I accessed my router at 192.168.1.1 I logged in fine and could access
my profile settings (Vz supplied account ID and vz supplied Pw) but I am unable
to open the Status,Configuration, Troubleshooting, or Maintenance pages. Is this
related to the DNS settings or what else should I check out?
What are the default Vz DSL DNS pri and sec addresses?
Thanks

I doubt it has anything to do with DNS settings, the simplest workaround would be to reset the modem. Depending on what model you have .. Westell 6100 ???
1. logout of the router but leave it powered on
2. Press and hold the reset pinhole for approx 15 seconds then release
3. All settings should revert to "factory" then you will have to change the DNS severs and whatever custom settings you had.
Welcome to the Forums
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Cannot bring up the SAP ERP 6.0 Installer GUI on a linux redhat 5.4 machine

Hi,
I'm trying to install the SAP ERP 6.0 on a Linux Redhat 5.4 machine and the gui for the install does not come up
Here is the message
sudo ./sapinst
Password:
[==============================] \ extracting... done!
Starting GuiServer using:
/usr/bin/java -Xmx256M -Djava.security.egd=file:/dev/urandom -cp /tmp/sapinst_exe.24750.1283972427/JAR/instgui.jar:/tmp/sapinst_exe.24750.1283972427/JAR/inqmyxml.jar SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
init: retrieving account information for group sapinst...
init: retrieving account information done.
load resource pool /remote/repeng5/SAP/sd_benchmark/Extracted/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host inspired.sybase.com, port 21200 to continue with the installation
My env. is the following
java -version
java version "1.6.0"
OpenJDK Runtime Environment (build 1.6.0-b09)
OpenJDK 64-Bit Server VM (build 1.6.0-b09, mixed mode)
Memory in the machine is 16 GB. I have tried bringing up the installer on a different linux redhat 5.4 machine and there are no issues there
Any help/pointers would be greatly appreciated

Thank you both for your reponse.
I did try changing the java to 1.4.2 but I still get the same behaviour. The gui just hangs.
Here's my new env.
java -version
java version "1.4.2"
gij (GNU libgcj) version 4.1.2 20080704 (Red Hat 4.1.2-46)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Logon to VZ router (192.168.1.1) on iphone/ipad

Has anyone been able to logon to their Fios VZ router from their iphone or Ipad?
I can access the router no problem from my PC or my Laptop, but from my ipad or iphone, no luck...
It keeps getting invalid logon...
(I even cut/paste the password so I know it's right)
anybody?
Thanks
Denis

denis_labine wrote:
Has anyone been able to logon to their Fios VZ router from their iphone or Ipad?
I can access the router no problem from my PC or my Laptop, but from my ipad or iphone, no luck...
It keeps getting invalid logon...
(I even cut/paste the password so I know it's right)
anybody?
Thanks Denis
Yes, I have, but with the following caveat; When typing the password, it echoes dots to the screen. First, it echoes 2 dots, but wait a split second for the 3rd dot. Then and only then, enter the next character. Try that, and by all means reply here with your results, so we all can benefit. Also, let me know if it's not the solution for you. Cut/Paste won't work for me also.

FVRF - cannot SSH into the router

Hello,
Does anybody know why after configuring a router for FVRF and IVRF I can no longer SSH into the box? As soon as the outside interface is placed in the FVRF I loose the remote connection and when try to reconnect the router refuses the SSH connection, what am I missing?
Thanks and best regards.
Remi

Hello.
Not clear what is your issue, but default behavior for ISR G1/G2 is to remove IP-address from the interface whenever you move it between VRFs.
To move interface between VRFs you either need second management interface or EMM script.

HP vs15 Cannot bring up the menu

Pressing the menu button has no effect. I tried the unplug reset; that didn't help.
The operating system is Windows XP Professional.
The computer is a Dell Dimension 3000.
Is there a way to bring up that menu from the PC keyboard?
Thanks for your help!

Hi Alan,
Here are the instructions for using and adjusting your monitor.
You cannot access the functions from the keyboard.
The monitor buttons may have failed.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

Cannot bring up the router (192.168.1.1)

Similar Messages

Maybe you are looking for