Cannot broadcast video- cam settings panel unresponsive- OSX 10.4.11

Aloha,
I have a Mac G4, DP 1Gb Power PC computer running OSX 10.4.11. About a week ago I tried to connect to a video chat room, which I had visited many times before and used successfully for the past couple of years. When the site asked for access to my cam - to accept or deny access - the camera settings dialogue box was unresponsive. I tried a couple of other sites as well and the same thing happened: the camera settings box appeared, but didn't work.
At that time I was running a slightly older version of Flash, so I decided to uninstall it and install the latest version: MAC 10,1,102,64. I did that, and tried again to broadcast and the same thing happens. TheTroubleshoot Flash Player | Mac OS page confirms that it is installed properly and detects the new version,
When i go to http://www.testwebcam.com/ the Adobe Flash Player Settings box shows up at the top of the page. If I click "Allow" or "Deny" nothing happens.
I spent hours looking around the support area and have found no answers, nor was live support helpful except for suggesting that I go to this forum. Can anyone please help me?

Hi, Since I don't use cameras nor chat rooms, the only thing I have on this would be the following. This was posted by another user with a PC as far as I know.
Well, I finally got my problem fixed. My camera is now working in chat rooms.
Thanks for all input!
Seems as if all camera settings are stored on Adobe's Flash web site:
http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager.html
Here you must set your camera settings - especially Website Privacy Settings panel
and Peer-Assisted Networking Panel
One must visit:
http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager.html
For each and every browser they use.
Hope that is helpful, if not, then perhaps someone will post that has more information for you.
eidnolb

Similar Messages

N8 - cannot select / modify camera settings (Photo...

Hi guys, Im in the camera mode (Photo). I select "Options" then I select "Settings" and the phone exits the camera mode and brings me to the Home Screen.
This does not happen with the camera mode (Video).
Therefore Im not being able to change any settings for taking pictures. (Quality,size,destination.ect)
How can I fix this?
Thanks

Try going to menu/settings/application's settings/photo-video . It's the same options but without opening camera application. Restarting the device may help too.

Video Camera Settings

Hello all, i recorded a video of a presentation that i was to send off.....total time was 2min 28sec.....video settings were HDR ON.....VIDEO SIZE was set at 1080P at 60fps.I treid emailing it but it said it was too long at 256mb & only 16mb would send...approx 15 seconds worth.....tried sending it thru WhatsApp & exactly the same problem.I tried HDR OFF & 720P but exactly the same problems.......am i missing something or is this normal???? Thanks in advance

Thanks......will look into that, still finding my feet with the Passport compared to Android

Where are the camera settings?

I've been looking around the settings in Skype and I can't find anywhere to choose a camera (plugged into my Android TV box) or to change its settings (brightness etc).
"Cogito, ergo es. I think, therefore you is." Ray D. Tutto (King of the Moon) to Baron Munschaussen

Hi,
There are no video/camera settings in the Skype app. The Skype app is not build to be used in Android TV which is why this was never needed.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
(85018)

Is it possible to set up my iPad as a video camera and broadcast it real time to a TV via apple TV?

Is it possible to sey up my iPad as a video camera and broadcast it real time to a TV via Apple TV?

Use airplay to send what is on the iPad to your tv.
Since ipad2, you can display exactly what is on the ipad screento a tv via an adaper or via airplay through an apple TV.
http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
General overview but lacks specifics.
http://accelerateyourmarketing.com/home-video-studio/
Video
https://www.youtube.com/watch?v=ce5FVJi0Uxw

I cannot switch from camera to video on my ipad

I cannot switch from camera to video on my iPad, when I click on the video icon there is no response, also the bar where the video to camera slide is located is not on my screen

Stedman. --
you the man! I did everything but stand on my head. Thanks! Ken T.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

Hello, I am contemplating buying a video camera, used. Its a PANASONIC DVC PRO AJ– D 200 BROADCAST QUALITY CAMCORDER.
I see it uses S-video 4-pin x 1, to transfer from the tape. I do not know if I can do this with my intel imac. Would I need a special cable?
I have no clue. thanks
Ann

I cannot install the component for QuickTime to convert videos done by a Sony video camera. My iMac tells me that software is designed for previous versions of Os x. Any ideas?

I cannot install the QuickTime component for MPEG-2 to read and covert video files created by Sony video cameras. My iMac tells me that the software is designed for previous versions of OS X.
Any ideas?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

Possible to adjust video camera quality settings?

I realize this is a shot in the dark, but is there any way to adjust the video camera quality settings on a 5th-gen nano? I'm wondering if the poor quality of the video is a result of the hardware or the built-in compression settings.

Hello Matt,
is there any way to adjust the video camera quality settings on a 5th-gen nano?
No. What you see is what you get.
Here are the specs for captured video on your nano.
H.264 VGA video, 640 by 480 pixels, up to 30 frames per second with AAC audio
Not exactly top notch, but still decently quality for a decent price. It's more than likely due to both reasons. This may improve with future generations.
B-rock

I can't take a video in camera mode. I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?

I can't take a video in camera mode. I have the words video, camera and square down the right hand side of screen but cannot activate video? Any ideas?

Swipe up or down to select options.

Camera settings for making youtube videos

I have a Canon 60D and CS4 master collection with Premiere Pro and Encore. What settings should I shoot video at in order to get the best youtube output? My choices are 1920x1080-30; 1920x1080-24; 1280x720-60; 640x480-60; crop-640-60

Thanks Bill, that's a most honest answer. I also found this tv segment to help in the camera settings. http://tv.adobe.com/watch/shooting-and-editing-hdslr-video-using-adobe-tools/-setting-up-t he-camera-correctly-for-dslr-video/ This is most exciting challenge and a healthy switch from my traditional photo skills.
Bob.

Cannot check Allow Third-Party Content from Global Storage Settings panel.

I cannot check the box that says Allow Third-Party Content To Store Data On Your Computer in the Global Storage Settings panel. I have seen many other people with this issues but they have either been unresolved or the resolutions to the problems do not work for me.
I am running
Windows XP SP2 32bit
Firefox 3.6.6 32 bit
Can somebody please help me resolve this issue?

When you open Windows Explorer, type %appdata% into the address bar, and it will take you to the location.
On Windows XP this is usually C:\Documents and Settings\[username]\Application Data
From there go down to the 'Adobe' and 'Macromedia' folders and delete the 'Flash Player' folder in each.

Stagebox camera converter and Typhoon Ingest Card lower broadcast video production costs with Ethernet

The broadcast video market is in a transition period between the use of proprietary broadcast-specific networks and Ethernet. The proprietary broadcast video network protocols came into existence because, at the time, Ethernet speeds and standards were not up to the demands of live video production. Now they are. Ethernet-based broadcast networks promise to reduce video production costs by allowing the use of standard Ethernet cabling and switches to ship video from multiple cameras at an event to the production and editing suite. But there’s plenty of equipment already in the field that uses the older broadcast video network standards. Two new products developed by Xilinx Premier Alliance Member CoreEL in conjunction with BBC R&D can adapt existing broadcast equipment to Ethernet networks specifically for venues such as small- and medium-scale sporting events and multi-location live events (like elections).

I haven't the faintest idea. I only use DV, HDV and XDCAM-EX/HD and have never tried it with any (RED) 4K material. I assume it should be sufficient to handle that. But let's be honest, when I increased my raid array from 10 to 12 disks, I did not notice ANY performance gains. The limiting factor must be the PCI-e bus or the Areca controller, that just does not show any improvements from adding a couple of disks. Another thing to consider is that the various benchmark programs widely in use show quite different results.
As an example, here are two images from HD Tune Pro, one for my 2 disk raid0 on the Marvell chip and the other from my 12 disk raid30 array. First of all, HD Tune shows the wrong size, it is not 2199 GB but should be 10000 GB (at least that is what Areca claims as shown in the last picture), second it ONLY performs at around 745 MB/s transfer rate.
The most noteworthy item to look at is the rapid performance degradation of this raid0 when the disks get fuller. An average transfer rate of 165 MB/s is quite acceptable for a 2 disk setup, but seeing it go down to below 100 MB/s when the disks fill up is bothersome. It will not allow you to handle uncompressed HD at all.

Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue?

Cannot transfer videos taken from my Canon camera(MOV files) to the iPad 4. They have previous with no problems at all. Is this an update issue? I tried to sync them over using iTunes last night but it says that they cannot be played on the device. But they have previously

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Cannot broadcast video- cam settings panel unresponsive- OSX 10.4.11

Similar Messages

Maybe you are looking for