Cannot browse Amazon without freezing & extreme slowness.

This only happens at Amazon. Once I find an item, scrolling up and down , the page sticks or freezes. The entire computer (any other tab, as well as Tools) froze continuously every time I visited Amazon. The only way to escape this mess was closing w/Task Manager. Online, this is a not a new issue with Amazon. It's not only Firefox, either. Complaints go back two years. Amazon is very willing to help; they have not been able to, so far.
In March, Amazon said it's a cache problem:
1. force reload to ensure that you are looking at a fresh copy of the page, and not the version stored in your cache.
2. clear your cache.
I did the obvious, as suggested.
I then checked many FF troubleshooting suggestions, which I followed. I lowered the memory cache from inside about:config, although in Tools > Options, it was still set at 350MB. - I just lowered that from Tools today. - (Are browser cache and memory cache the same things?) I had blocked all Amazon cookies. I changed browser cache settings - I think Mozilla suggested four places.
Six weeks later, same results. Slow to not moving at all.
Amazon said, "The problem you're encountering on your visits to our website may be related to bookmarks that your browser is generating after using one of our search tools."
"Go to Amazon from our secure site https://"
"Don't use forward and back buttons."
See - they assume I'm searching and going forward and back, which is not really the case. You get seventeen results and go down the page. That's where my issues are. They also assume I'm starting from a logged in position, which is not the case 99% of the time. Don't know if this is important, but it's more accurate.
I have had HTTPS Everywhere installed since last year or earlier. Even logging in at their secure site, once you hit search, the resulting pages begin with HTTP.
One issue was cleared. Something fixed the entire computer freezing issue, so I don't have to close using Task Manager. Scrolling up and down is nearly impossible, still.
FF 37.0.1 installed. To my security addons, I added RAMBack, which hasn't made a difference in relation to this issue. Can I remove it now?
The settings below are all USER SET - the others are at default. Thank you for your help.
browser.cache.check_doc_frequency - 1
" check_disk.capacity = 139264
" disk.smart_size.enabled - False
" disk.smart_size.first_run = False
" disk.smart_size.use_old_max = False
" disk.smart_size_cached_value = 358400
" frequency_experiment - 1
browser.cache.frequency_experiment = 1
browser.cache.memory.enable = True
browser.cache.disk.capacity = 139264
browser.cache.disk.enable = True

Walking Shoe Guy wrote:
TJK - OK - my turn for a DUH question.. What is the Repair Disk? Is that part of the set that came with it?
What you mentioned in your fourth paragraph.
First check the S.M.A.R.T.status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insertdisc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open DiskUtility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

Similar Messages

  • Why apps cannot be downloaded because of EXTREME SLOW DOWNLOAD SPEEDS?

    I have iPad 2 with iOS 6.1.3
    Starting from last months until today, I have a big trouble with my iPad about EXTREMELY SLOW APP DOWNLOAD SPEED, in both downloading new apps and updating the currents apps from store.
    Only one app can take 1-2 hours to be downloaded. Some times even half day needed. Or sometimes process can finish with fail and says "could not be downloaded at this time"
    IT IS PAINFUL !
    I checked & did the following below, but I couldn't solve this issue. Please HELP !
    - My WIFI internet speed of home network is Great, no problem about that
    - I've already used a "Speed Test app" from iPad and it is great, no problem in the  speed also
    - I've checked the space and more than 30 GB is empty in the device
    - I've completely disabled Genius Apps feature
    - I tried many times hard reset by long pressing power and home buttons together
    Nothing can be solution the the problem. What can be wrong about downloading apps?

    How to Fix a Slow iPad
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
    iPad running slow? How to speed up a slow iPad
    http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
     Cheers, Tom

  • My macbook pro (late 2011) is extreme slow, freezing, crashing and lagging too often.

    I am new to the forum, I hope this is the good topic to post my problem.
    I have a late 2011 Macbook Pro, and it is getting slower and slower. The performance was bad with Mavericks as well, but now, with Yosemite installed, it is much more worse. I have never reinstalled my system (only upgraded the osx), so it is an almost 3 years old setup. In that time I have installed a lot of applications, and also deleted a lot. About a year ago I upgraded the RAM, but didn't help too much. Now with Yosemite my startup time is more than 5 minutes, and sometimes the startup freezes (and I have to push the power button long to retry). Safari with 5-10 tabs is extreme slow, and lagging when I switch tabs or open new ones. To launch a new app, for example skype, i have to wait 1-2 minutes. Everything is slow. Sometimes my finder crashes, and works only if I restart the macbook. Another example: if I open the downloads folder in Finder, I have the spinning loading icon for about 20-30 seconds, and just after this time can I see the content of the folder.
    My console is full of errors, I get new records in every single seconds. I repaired the disk permissions, deleted safari cache, history, etc. but nothing helped.
    Many people here attached an "etrecheck" record for their threads, I downloaded the app, and made one scan, you can see my results here, I hope someone with more technical skills can help me!
    Thank you in advance!
    (and sorry for my english - it is not my mother language)
    EtreCheck version: 2.1.2 (105)
    Report generated 2014. december 11. 12:59:29 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      10 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1280 x 800
      SyncMaster 1680 x 1050 @ 60 Hz
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:55:58
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (130.97 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. FaceTime HD Camera (Built-in)
      StoreJet Transcend StoreJet Transcend 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Transcend 2TB (disk2s2) /Volumes/Transcend 2TB : 2.00 TB (1.91 TB free)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/hosts - Count: 67
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Applications/KeyRemap4MacBook.app
      [loaded] org.pqrs.driver.KeyRemap4MacBook (9.3.0 - SDK 10.9) [Support]
      /Applications/PMHMac.app
      [not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.5) [Support]
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.hypervisor (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.netbridge (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.usbconnect (8.0 18494.886912) [Support]
      [not loaded] com.parallels.kext.vnic (8.0 18494.886912) [Support]
      /Applications/Toast 11 Titanium/Spin Doctor.app
      [not loaded] com.hzsystems.terminus.driver (4) [Support]
      /Applications/Toast 11 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) [Support]
      /Library/Extensions
      [not loaded] com.sony.driver.dsccamDeviceInfo00 (1 - SDK 10.7) [Support]
      /Library/StartupItems/DoubleCommand
      [not loaded] com.baltaks.driver.DoubleCommand (1.7 - SDK 10.8) [Support]
      /System/Library/Extensions
      [loaded] org.dungeon.driver.SATSMARTDriver (0.8 - SDK 10.6) [Support]
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) [Support]
    Startup Items: ℹ️
      DoubleCommand: Path: /Library/StartupItems/DoubleCommand
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [failed] com.adobe.CS4ServiceManager.plist [Support] [Details]
      [failed] com.adobe.CS5ServiceManager.plist [Support] [Details]
      [running] com.bjango.istatmenusagent.plist [Support]
      [running] com.bjango.istatmenusnotifications.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] com.sony.SonyAutoLauncher.agent.plist [Support]
      [loaded] org.pqrs.KeyRemap4MacBook.server.plist [Support]
      [failed] XR_3045NI_Startup_Fax.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.bombich.ccc.plist [Support]
      [loaded] com.cocoatech.pathfinder.SMFHelper6.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
      [running] com.spotify.webhelper.plist [Support]
      [running] homebrew.mxcl.mysql.plist [Support]
    User Login Items: ℹ️
      Flux Alkalmazás (/Applications/Flux.app)
      iTunesHelper AlkalmazásHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      GrowlHelperApp Alkalmazás (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      EvernoteHelper Alkalmazás (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
      Caffeine Alkalmazás (/Applications/Caffeine.app)
      Google Drive Alkalmazás (/Applications/Google Drive.app)
      Dropbox Alkalmazás (/Applications/Dropbox.app)
      DVDAuthorizeHelper Alkalmazás (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
      RescueTime UNKNOWNHidden (missing value)
      Alfred 2 UNKNOWN (missing value)
      SpeechSynthesisServer Alkalmazás (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
      Skype Alkalmazás (/Applications/Skype.app)
      uTorrent Alkalmazás (/Applications/uTorrent.app)
      Xmarks for Safari Alkalmazás (/Applications/Xmarks for Safari.app)
    Internet Plug-ins: ℹ️
      nplastpass: Version: 2.0.11 [Support]
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      ViewRightWebPlayer: Version: 3.5.0.0 [Support]
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      ResponsiveResize
      Save to Pocket
      Awesome Screenshot
      LastPass
      feedly
    3rd Party Preference Panes: ℹ️
      Double Command  [Support]
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Growl  [Support]
      Java  [Support]
      MacFUSE (Tuxera)  [Support]
      Perian  [Support]
      Xmarks for Safari  [Support]
    Time Machine: ℹ️
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 367.91 GB
      Destinations:
      Transcend 2TB [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 367.91 GB X 3)
    Top Processes by CPU: ℹ️
          21% WindowServer
          12% Console
          8% parentalcontrolsd
          6% backupd
          6% Activity Monitor
    Top Processes by Memory: ℹ️
      462 MB mysqld
      290 MB mds_stores
      290 MB Safari
      204 MB Finder
      183 MB WindowServer
    Virtual Memory Information: ℹ️
      2.20 GB Free RAM
      6.06 GB Active RAM
      809 MB Inactive RAM
      1.66 GB Wired RAM
      1.87 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 11, 2014, 09:38:41 AM iMovie_2014-12-11-093841_[redacted]s-MacBook.hang
      Dec 11, 2014, 12:04:08 PM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Yosemite extremely slow. Cannot stop pop up windows

    Yosemite extremely slow. Cannot stop pop up windows on any browsers. Considering going back to Maverick My iMack is mid 2011 21.5. I cannot find a solution to this problem

    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
    These may be helpful in improving Yosemite's performance.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Initial Time Machine Backup - Extremely Slow/Freeze

    Hello,
    I recently switched my external HDDs and began utilizing a different HDD in conjunction with Time Machine. I have used this HDD in the past with Time Machine and never had a problem. The initial backup is proceeding at an extremely slow rate and often freezes - as of writing, it is currently standing at 125.3MB of 1.07TB - About 1,172 days. I have erased and reformatted the drive (Mac OS Extended (Journaled)), tested data transfer rates to it by transferring files myself (normal rate), repaired permissions, verified my disks, tried the initial backup while spotlight was off and have forced a spotlight re-index, allowing it to go to completion before attemtping a backup - however, no solution has thus far worked. I have not made any large changes to my computer since I switched the HDDs either.
    Does anybody know what could be causing such a problem and how to fix this? Many thanks for any help,
    - Cptbigt

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • Extreme Problem - Cannot browse, or even connect.

    Setup: Airport Extreme connected to Unwired (ISP) ADSL modem by ethernet cable. Local ISP (Australia) ramps down the speed to dial-up speed if monthly download (1GB) limit is exceeded - that is the situation now.
    Problems: (1) I have an I-book that is "connected" to the airport, but the web browser (IE) cannot browse. I keep getting a "connection failure" message. Internet Connect shows a successful connection tot he wireless and to the internet.
    (2)I also have a PC connected to the Airport by the ethernet cable and can browse OK (but slow). However, if I try to connect the PC by the wireless to the airport I get the message that Windows cannot make the connection.
    The signal strength of the wirelss is very strong for both computers.
    I have called the ISP (Unwired) to see if there is some sort of hardware control info they need. No, they say to put everything in automatic.
    I have reset both the modem and the Airport's configuraqtion for maximum availability, and have left them off for a few minutes.
    Thewre is WEP encryption, but I have included the passwords when necesary.
    Any ideas?? Many thanks!

    gschelz, Welcome to the discussion area!
    Sounds like your iBook is experiencing a DNS problem. See KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • Extremely slow download speeds and internet browsing on Macbook pro

    I recently got a 13"" macbook pro. System config - Maverick OS/i7 dual core/8GB RAM/750 GB HDD, Almost 690GB of free space available. I am expriencing extremely slow download and internet browsing speed. I have to wait for almost 10-12 seconds for normal sites to download. The app updates and downloads are painstakingly slow.
    The internet speeds are working perfectly fine on my Windows Laptop, and even on my mobile phones. So, the there's no issue of network. Also, I have cleared safari cache etc, just to be sure. But nothing's really helping.
    Can any one help me here.
    Thanks !
    Chetan

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    Quit and relaunch the browser. Any change?
    Log out and log back in. Any change?
    Enable Private Browsing in the Safari menu. Any change?
    Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
    If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
    If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
    Again, if only Safari is involved, open the iCloud preference pane and uncheck the box marked Safari, if it's checked. Any change?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • My Windows XP computer becomes extremely slow when I try using iTunes. It cannot connect to iTunes Store. I tried uninstalling and reinstalling iTunes but nothing changes. I cannot use iTunes or sync my iPod anymore. Please help.

    I cannot use iTunes anymore. My computer becomes extremely slow or just freezes. I notice the problem started after I updated iTunes to a new version. I have tried uninstalling iTunes completely from my computer and installing it back, but problem continues. We iTunes launches, it tries to connect to iTunes store, but it doesn't seem to be able to do that either. I can't sync my iPod or play back my music, please help.

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

    I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

    Open AirPort Utility. The first screen looks something like this:
    Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
    If you do not see these screens, you will need to start over and configure your AirPort again.

  • Mail account cannot update because home directory is full. But I can not get into mail without freezing. Is there a back door entry?

    mail account cannot update because home directory is full. But I can not get into mail without freezing. Is there a back door entry?

    Do you mean that your startup disk is full?

  • I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

    i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

    Hi Jay,
    Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
    "Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
    Regards,
    Barry

  • I have to open firefox twice otherwise it will freeze. I can see my home page but I cannot browse. If I close it and then reopen it works fine. I have just noticed this after installing the latest version

    Firefox freezes when I open it. I can see my homepage (incomplete) but I cannot browse. The cursor moves but cannot open anything. If I close and reopen firefox it works fine.
    == This happened ==
    Every time Firefox opened
    == I updated to the latest version of firefox

    These issues are usually caused by firewalls. See [[Cannot connect after upgrading Firefox]]

  • I installed the latest update of iTunes and now my computer is extremely slow and it freezes, What should I do to make it run  as usual?

    I installed the latest update of iTunes and now my computer is extremely slow and it freezes. When I click on the itunes icon, nothing happens, if it opens is a long time afterwards. Most of the time it does not even open, but the computer is very slow. It is a PC desktop running windos xp.

    Hey ArgentoSB!
    I have an article for you that can help you troubleshoot these issues:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • ITunes is extremely slow and I cannot make a secure connection

    When I connect to iTunes my computer is extremely slow, and when I try to connect to the iTunes store I get the error message cannot make a secure connection.  I have internet access and I have ran the iTunes diagnostics test and all the tests passed except making a secure connection.  I have disabled all of my security systems including my firewall and Norton.  I am not running any proxy settings.  This has been an ongoing problem for over a month and I am at a loss. 

    Check out this Apple article -> iTunes: Advanced iTunes Store troubleshooting
    Blocked by configuration: (Mac OS X/Windows)
    Configure Internet Options (for Windows computers only):
    Run iTunes Diagnostics. If the "Secure link to iTunes Store" section does not pass, do the following.
    Open Internet Explorer.
    From the Tools menu, choose Internet Options.
    Click Connections.
    Under "Dial-up and Virtual Private Networking," choose "Never dial  a connection." It may not be possible to choose this if you’ve never used  dial-up Internet; if this is the case, skip to the next step.
    Click LAN Settings.
    In the window that opens, enable the option to "Automatically detect  settings" if it is not enabled.
    iTunes uses Internet Options proxy settings. Apple recommends  removing proxy settings that interfere with access to the iTunes Store  if needed.
    Click OK.
    Click the Advanced tab.
    Scroll down to the Security section and look for the option to "Check for server certificate revocation." If it is enabled, disable it.
    Look for Use SSL 3.0 and Use TLS 1.0. Make sure at least one of  those two checkboxes is selected and click OK (You can select both checkboxes).
    Apply any changes, and restart your computer if you modified the option to "Check for server certificate revocation" (step #11).

  • I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas

    I recently cleared my hardrive and reloaded the install software including snow leopard and now the browser is extremely slow. Any ideas

    Your profile says OS 10.5.8, Snow Leopard is 10.6.
    After installing Snow Leopard, did you do a software update? Apple menu / Software update ..
    If you have not run it yet, do so. It will give you the highest versions of Snow Leopard and Safari. That might help.

Maybe you are looking for

  • Upcoming Patch Release

    Hi Everyone, We thank everyone for bringing to our notice some issues that has happened with the recent player and our sdk update. We have identified a server side issue for this and we are in process of fixing it. This will fix issues such as a) Sta

  • Satellite C855-1GQ - hard drive failure warning

    Hi suddenly my laptop has started showing me "hard drive failure warnings" and I honestly have no idea what to do about it please can someone help me. Symptom: The PredictFailure flag is set on the disk Cause: A logical disk has the SMART Predict Fai

  • Why do we need the table TCURF?

    Hi Friends, Can't we get our currency translation job done without our sweet currency factors table TCURF. Say we want to convert fig's from FROM curr to TO curr at Daily avg rate (M) and we have an exchange rate as 2,642.34. Factors for this currenc

  • LSM TEST WITHOUT TAPE DEVICE

    제품 : ORACLE SERVER 작성날짜 : 1999-12-09 *** LSM TEST without tape device *** 이 문서는 실제로 tape device를 장치하지 않고 Legato Storage Manager(LSM)을 이용하여 백업을 받는 방법을 설명한다. Introduction LSM이 처음 install되면 tape device가 장치되지 않았더라도 RMAN과 연계하여 잘 구성되었는지 확인할 필요가 있다. 이것은 특별한

  • HELP!  Strange sync issue

    This is by far the strangest problem I have come upon and can't find anything in any forum discussing it. My site is www.aloversscent.com. We are trying to put up 4 videos. I am editing in FCP and compressing in Compressor to H.264 and then making th