Cannot browse the net

i recently purchased WRT54GS and since the day i bought it i am having this issue where i cannot browse eventhough i see the the wireless network connection icon strength showing either excellent or very good, several times i have taken online help on the linksys site but the problem remains, its just very frustrating, would some one please help??????

You must setup a router first through a wired connection. If the computer works through a wired connection you can deal with the wireless side.
Have you changed the router password from "admin" to something else?
Have you change your SSID from "linksys" to something else on the router?
Have you configure wireless security?

Similar Messages

The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

reset the iphone
1. press the wake/sleep button the top until you get the red slider
2. Slide to power off
3. Wait for phone to power off (you get a spinning gear icon for a while)
4. press the wake/sleep button to turn in back on.
if that doesn't work reset network settings
1. Go to Settings->General->Reset->Reset Network Settings
2. Confirm that you want to do this and the phone will restart itself
if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

HELP REQUIRED:Want to use my N79 & browse the net ...

I have recently bought an N79. When I connect it to my laptop through the supplied cable the nokia PC suite says that "S60 device connected through a non-compaitble mode". I want to browse the net on my laptop using my cellular provider's GPRS service while connected through the supplied USB cable. Can anyone help?
Solved!
Go to Solution.

Hi there
You need to make sure when you connect the device that it is connected in PC Suite mode. When the cable is plugged in it should ask you which mode you would like to use. If it does not ask you then you need to go to:
Menu>tools>connectivity> USB and select "ask on connection" YES
Once connected in Pc suite mode the necessary drivers will install and you can connect to the net on the computer through the N79-1 using Pc Suite.
Hope this helps
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Why Cant we browse the net from our Apple TV?

Im sorry if this question has been asked and answered a thousand times but I don't get it what is taking Apple so darn long? There is no technical reason preventing us from using the Apple TV to surf the net from our couch. Sure there might be arguments about the functionality with the current remote but if people are willing to overcome functionality to browse the net from outdated cellphones they certainly will do the same from the convienence of their own couch.
I for one am looking forward to the day I can replace my computer desk with my couch and I will be happy to replace my keyboard/mouse with the stock apple tv remote or my IPod just as soon as apple is ready to let me do it.

Technically of course it could do it, but it's not an advertised feature of the device.
It could also do some word processing and print wirelessly, play chess, Tetris or Doom like games - again all things it could do but not what it was designed for.
No harm sending an enhancement request here:
http://www.apple.com/feedback/appletv.html
...but you're guess is as good as mine as to whether or not Apple would implement a browser.
Some people have also said it would be great if AppleTv had an 'apps store' smilar to iPhone to let people add functionality.

DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
Andras

Hi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

ERROR: cannot route the nets within the site IOB_X1Y227

Hi,
I'm trying to generate a bitfile for virtex-7 XCV2000T-FLG1925 using synplify to synthesis and 2014.4 vivado to PR. During the PR process i received the below error.
ERROR: [Constraints 18-608] We cannot route the nets within the site IOB_X1Y227. Reason: Could not route the logical net: u_sys_pub/emwen on site IOB_X1Y227 to the load pin OUTBUF_DCIEN.OUT. Please check your design to see if the pin has a legal route to its driver or loads.
emwen is set output , and
define_attribute {emwen} {xc_loc} {AV28}, at meanwhile, the below constrain is set in .xdc:
create_pblock pblock_u_sys_pub
add_cells_to_pblock [get_pblocks pblock_u_sys_pub] [get_cells -quiet [list u_sys_pub]]
resize_pblock [get_pblocks pblock_u_sys_pub] -add {CLOCKREGION_X0Y3:CLOCKREGION_X1Y5}
please help me to fix this error
thanks.

Hi
The reason for the error message is "IOB blocks should be in static region". See the page no. 54 in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_4/ug909-vivado-partial-reconfiguration.pdf for more information.
Thanks,
Vinay

Cannot Change the Net price or currecny of a PO

Hi
When i go into change mode of a Purchase Order, I cannot change the Net price or currecny, when my collegaue is able to change this, is this a authorisation issues?
also, were can I see the PO history TAB?
Edited by: Ian Wong on Jul 4, 2008 4:53 PM

Hi
You must have the following Authorization Objects
with 02 Change Activity in your role profile
M_BEST_BSA
M_BEST_EKG
M_BEST_EKO
M_BEST_WRK
And for PO history tab, its at PO screen item part
but to be able to see it there must be some logistic movements
such as GR,IRetc.
After logistic movements the tab is appearing
Best Regards

2 probs with 5800 when browsing the net my phone m...

hi when browsing the net my phone memory fills up after a while clearing all private data doesnt help the memory info says it all seems to be used by a folder called others but when i open phone memory and other file its empty im at a loss it means i have to keep doing a factory reset or it keeps telling me to delete stuff from the phone memory but there is nothing but empty files there ?? anyone any ideas of a solution
also im on the trial version of drive and walk navigation how much does it cost to get a full version once my trial has expired as i cant find the info anywhere
cheers all

Walk & Drive: http://www.nokia.com.au/explore-services/nokia-maps/support/nokia-maps-2-0/pricing
This is the Australian pricing.

Firefox cannot browse the internet until I clear an "OFF LINE WORKING" ITEM FROM THE MENU ?

How do I clear "off line working?" to allow Firefox to browse the net?

Presumably you're using FF4 (?).
If so, do the following.
* Right click a blank part of the Tab Bar and then click the top option called "Menu Bar". This will remove the orange Firefox button, but reinstate the text links at the top.
* Next, click "File", then click "Work Offline" to remove the checkmark. You should now have Internet access.
To reinstate the previous layout, repeat the same steps.

Mozilla has switched off content blocker and URL advisor for Kapersky and I cannot browse the web

How do I turn these back on?

It appears that the problem is that the Kaspersky components are outdated an needing action from Kaspersky. I have not the time to research this myself at the moment, but you may be able to do so your self on their support site.
What do you mean by you cannot browse the web.
What are the content blocker and URL advisor intended to do ? They may well be largely unnecessary and superfluous. Is just installing them blocking you from using Firefox ? If so uninstall them until Kaspersky has a fix.
Please also look at this thread
* [/questions/975869] <br /> (With Windows 7 it would be similar advice) concluding:
''Firefox doesn't have any known compatibility issues with any of the major anti-virus suites, but honestly you are wasting your money if you pay for them. Uninstall them and use Window 8's built in Windows Defender. Update your Windows 8 machines to Windows 8.1, and make sure your win 7 machine is up to date, and always keep everything on your machines (Firefox, plugins, etc.) all up to date. That will keep you secure as possible. ''
* From Windows Microsoft see http://windows.microsoft.com/en-gb/windows/security-essentials-download (That '''explains''' about MSE it does NOT automatically download anything )
Note
(But Quotation above is from Tyler who IS professional paid Mozilla Firefox support staff)
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

BIZZARE PROBLEM ! N200 cannot browse the Internet but email is working HELP

Bizzare problem I have a Lenovo N200 running Vista Home Premium. The machine was running perfectly until Monday. At the moment I cannot access the Internet. The bizzare thing is that my email works fine and I can send and receive email. But I cannot surf the web on IE. I even installed Firefox and still cannot access the Internet. I have checked the network settings. I am using a LAN cable. The settings are fine. I reset the adapter. I have taken off the anti virus and reinstalled. The weird thing is if I go into the Lenovo recovery while booting up I can access the web on that browser. In Vista in Command Prompt I am able to ping www.google.com and I get a responce. I simply cannot access the Internet from any browser in Vista. Can anyone help? Any ideas? Thanks Mike

Bizzare...
Have you checked your firewall settings? I know that non-Windows firewalls, if not loaded properly, can block all incoming data. I remember when I uninstalled ZoneAlarm on my main PC once, all data was blocked. And on my Sygate Personal Firewall, if it isn't loaded when Windows boots, any new problems won't be able to use the net until its loaded and exempted from blocking. (This could happen to Windows Firewall too, but I'm not sure).
If that doesn't fix it, not sure what then.

By default my font change when i was browsing the net

My font changed when i am browsing the login to Gmail /Yahoo mail and inbox also

Yes you can but if it comes again then you will be in a way to bear old version. But i hop that it cannot come again just make shure that you dont unplugged your BB during installation.
Thanks for your reply if it solved please dont forget to give a kudos. Its not a requirement
Take care

Cannot "browse" the internet.

I'm having a somewhat odd problem (aren't we all). My internet connection has recently... slowed to crawl. However, only when browsing using Safari, Firefox, Camino or any other browsers. Testing my connection (via sites such as broadbandreports.com) reports normal speeds. It takes forever to load these speed test sites, but the actual test goes along just fine. Along the same lines I can download files from the internet (assuming I can get them started) just fine.
I can talk on AIM fine, send files around the local network, I can even play various online games just fine. It literally seems like the computer is having a hard time rendering html. But as I have tested it in a number of browsers, created new user accounts, repaired permissons, and even clean installed I feel there must be something more sinister going on.
It will often stall out at "connecting" to various servers. I will get errors saying I am not connected to the internet, or safari (or whatever browser I'm using) cannot find the server (even though I can be IMing in the background). Running the network diagonstics utility will often say the "server" is the problem, but before I can get through with it the server "light" goes back to green. However I am still plagued by slow page loads.
I thought it might be my reuter or cable modem, I have reset both devices multiple times, tried different ethernet cords, and tried different ports on the reuter. I would then assume it was merely my provider being screwy, but I have Windows PC sitting right next to my G5, on the same network, that works just fine.

OK, I'll take a stab-Oh, and there's really nothing "sinister" going on...just misconfigured, perhaps.
It sounds like DNS might be set incorrectly. (Read about DNS).
Go into SystemPreferences>Network>Configure, and see if there are any DNS Servers listed in there (they'll be IP addresses.)
Also look there to see what your router IP address is.
Compare those two numbers.
In the DNS server box, add the IP of your router, and "Apply Changes". Restart the Mac, for good measure.
Test Internet.
If the DNS number already is your router number, find another known good DNS server (Check out what DNS server/s your Win PC is using - Open Command Prompt, type:
ipconfig /all <enter>
and see if you can find DNS server on the display that shows on the PC's little DOS screen.
Stop back and report your results. Good Luck

Previewing clips in Prelude while in other applications (e.g. browsing the net)?

Prelude is a great tool for quickly going through media, but sometimes clips require you to watch or listen to the whole thing to find the right moments. I'd love to be able to have clips playing in the background while surfing the net. Is there a way to do this? I'm using the Mac version of Prelude, and everytime I switch to another application while Prelude is playing a clip, the clip pauses.

About your update. If you have multiple displays you can specify one of them to have full-screen playback (don't select your display with the Mac menu bar, that can make it a challenge to get back to the preferences to undo the change). The "Disable video output while in the background" control makes it so this full screen output is turned off when you bring another application forward. In all cases Prelude CS6 stops playing when another app comes forward. Thank you, in advance, for filing a feature request.

Imac Keeps Crashing When Browsing the net (often when scrolling)

Hello,
I bought a refurished imac from Dixons about a fortnight ago. I was provided with no discs so I can't do a hardware test.
In the last few days my imac has started crashing. It has always crashed when I'm browsing the internet and usually happens when I'm scrolling. At first i thought it was Google Chrome so I switched to Safari but the same has continued to happen. The screen usually goes grey and I a message telling me to power off my imac and restart.
I keep getting a similar log to this:
Interval Since Last Panic Report: 214011 sec
Panics Since Last Report:          4
Anonymous UUID:                    7F653199-3613-414C-AF52-06D9BE5428FB
Mon Jul 16 20:44:14 2012
panic(cpu 3 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002901d0, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000011fcd3000, CR3: 0x000000003e987014, CR4: 0x00000000000606e0
RAX: 0x0000000000000001, RBX: 0x0000000000391000, RCX: 0xffffff801eae0900, RDX: 0x00000000003ed9f0
RSP: 0xffffff8162173da0, RBP: 0xffffff8162173dc0, RSI: 0x00000000283baec0, RDI: 0xffffff8006b9fcf8
R8: 0xffffff8162173f08, R9: 0xffffff8162173ef8, R10: 0x000000011fd6d000, R11: 0x0000000000000000
R12: 0xffffff8006b9fcf8, R13: 0x0000000000000000, R14: 0xffffff80230c0640, R15: 0xfbffff800ad39598
RFL: 0x0000000000010282, RIP: 0xffffff80002901d0, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x000000011fcd3000, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8162173a60 : 0xffffff8000220702
0xffffff8162173ae0 : 0xffffff80002c266d
0xffffff8162173c80 : 0xffffff80002d7a1d
0xffffff8162173ca0 : 0xffffff80002901d0
0xffffff8162173dc0 : 0xffffff800026c9a3
0xffffff8162173f40 : 0xffffff80002c1f0b
0xffffff8162173fb0 : 0xffffff80002d7941
BSD process name corresponding to current thread: Safari
Mac OS version:
11D50
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 9687365751685
last loaded kext at 20147552645: com.apple.driver.AppleBluetoothHIDKeyboard          152.3 (addr 0xffffff7f81c5a000, size 12288)
last unloaded kext at 250730616637: com.apple.driver.AppleUSBUHCI          4.4.5 (addr 0xffffff7f80a3f000, size 65536)
loaded kexts:
com.avast.PacketForwarder          1.3
com.avast.AvastFileShield          1.0.1
com.apple.driver.AppleBluetoothMultitouch          66.6
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.1.7f9
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AppleMikeyDriver          2.1.7f9
com.apple.kext.ATIFramebuffer          7.1.8
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.ATIRadeonX3000          7.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleBacklight          170.1.9
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleIntelHD3000Graphics          7.1.8
com.apple.driver.AppleIRController          312
com.apple.iokit.SCSITaskUserClient          3.0.3
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AirPort.Atheros40          502.60.2
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.3.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.1
com.apple.driver.AppleIntelCPUPowerManagement          167.3.0
com.apple.driver.AppleBluetoothHIDKeyboard          152.3
com.apple.driver.AppleHIDKeyboard          152.3
com.apple.driver.AppleMultitouchDriver          220.62.1
com.apple.driver.IOBluetoothHIDDriver          4.0.3f12
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.DspFuncLib          2.1.7f9
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.iokit.IOBluetoothSerialManager          4.0.3f12
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.driver.AppleHDAController          2.1.7f9
com.apple.iokit.IOHDAFamily          2.1.7f9
com.apple.iokit.IOAudioFamily          1.8.6fc6
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.driver.AppleThunderboltEDMSink          1.1.3
com.apple.driver.AppleThunderboltEDMSource          1.1.3
com.apple.kext.ATI6000Controller          7.1.8
com.apple.kext.ATISupport          7.1.8
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.8
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleThunderboltDPOutAdapter          1.5.9
com.apple.driver.AppleThunderboltDPInAdapter          1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController          4.0.3f12
com.apple.iokit.IOBluetoothFamily          4.0.3f12
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.3
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.3
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.driver.XsanFilter          403
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IO80211Family          412.2
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.3
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Model: iMac12,1, BootROM IM121.0047.B1D, 4 processors, Intel Core i5, 2.7 GHz, 12 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x859B, 0x435435313236344243313333392E4D313646
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x859B, 0x435435313236344243313333392E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.61.4-P2P
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
What could be causing these crashes?
Thanks for your help.

com.avast.PacketForwarder          1.3
com.avast.AvastFileShield          1.0.1
As a first step I'd suspect Avast - try fully uninstalling it, you don't need it.
You could try a 'safe boot' which should boot the Mac without loading the non-Apple stuff. Test web-browsing to see if the kernel panics go away.
To Safe Boot: restart holding down the shift key until the grey progress bar appears. The Mac should boot in 'stripped down mode' allowing you to run a few tests web-browsing. Restart as normal from the Apple menu when you're done.
If the Mac came with no disks you are probably running OS X 10.7.x Lion. You can check/repair your disk by booting while holding down Command+R which takes you to Lion's recovery mode. You can run Disk Utility from there to verify/repair your disk should you ever need to.
If you feel you want some anti-virus software the one that is most often recommended on these forums as being trouble-free on Macs is the free/donationware clamXav: www.clamxav.com

Cannot browse the net

Similar Messages

Maybe you are looking for