Cannot browse to IPS

Hi all,
I have some issues about IPS-4260 appliance with management. I used Cisco IPS Event Viewer 5.2 but no activity was shown to it and i cannot browse to IPS box through Https. i tried to reload box but issues still occured.
Please give me an idea to check or fix this case.
Thanks!!

Hi Scott,
This is output of show version, host cert still valid date
Cisco  Intrusion Prevention System, Version 6.1(1)E3
Host:
    Realm Keys          key1.0
Signature  Definition:
    Signature Update    S479.0                    2010-03-19
    Virus Update        V1.4                     2007-03-02
OS  Version:             2.4.30-IDS-smp-bigphys
Platform:                IPS-4260-K9
Sensor up-time is 25 min.
Using 1886916608 out of  4100345856 bytes of available memory (46% usage)
system is using 17.7M out of  29.0M bytes of available disk space (61% usage)
application-data is using  45.3M out of 166.8M bytes of available disk space (29% usage)
boot is  using 40.5M out of 69.5M bytes of available disk space (61%  usage)
MainApp          M-2008_APR_24_19_16    (Release)    2008-04-24T19:49:05-0500   Running
AnalysisEngine    ME-2008_OCT_17_00_32   (Release)   2008-10-17T00:58:23-0500    Running
CLI              M-2008_APR_24_19_16    (Release)    2008-04-24T19:49:05-0500
Upgrade History:
*  IPS-sig-S476-req-E3       07:07:30 UTC Wed Mar 10 2010
   IPS-sig-S479-req-E3.pkg   07:07:17 UTC Sun Apr 11 2010
Recovery Partition Version 1.1 -  6.1(1)E2
Host Certificate Valid from: 13-Jul-2008 to  14-Jul-2010
Do you have any an idea to check or verify to get me to access through the box via https?

Similar Messages

  • ITunes 7 cannot browse album covers on this computer error and crash

    Installed iTunes 7 yesterday, and now every time I try to go to certain pages in the iTunes store, such as movies or tv shows, I get an error saying "iTunes cannot browse album covers on this computer". Then iTunes immediately crashes. Has anyone else had this problem? Any fix??
    Compaq   Windows XP  

    I have the same issue. Not sure if this has anything to do with it, but I was on the Cover Flow View and it was working fine. I clicked on the full screen icon and the entire screen went random (meaning totally random pixels of color all over). I pressed the escape key and the normal screen returned, but it only showed a black section where the covers had previously been. I restarted iTunes and it started giving me the same message. I also can see them in the lower left and on the Album View. Just the Cover Flow view doesn't work. I downloaded the latest iTunes today and I keep all of the Windows updates on.

  • I have to open firefox twice otherwise it will freeze. I can see my home page but I cannot browse. If I close it and then reopen it works fine. I have just noticed this after installing the latest version

    Firefox freezes when I open it. I can see my homepage (incomplete) but I cannot browse. The cursor moves but cannot open anything. If I close and reopen firefox it works fine.
    == This happened ==
    Every time Firefox opened
    == I updated to the latest version of firefox

    These issues are usually caused by firewalls. See [[Cannot connect after upgrading Firefox]]

  • The 3G symbol is not showing up on my home screen and I cannot browse the net, any suggestions?

    The 3G symbol does not show up on my home page and I cannot browse the Internet or receive mail. Any advice?

    reset the iphone
    1. press the wake/sleep button the top until you get the red slider
    2. Slide to power off
    3. Wait for phone to power off (you get a spinning gear icon for a while)
    4. press the wake/sleep button to turn in back on.
    if that doesn't work reset network settings
    1. Go to Settings->General->Reset->Reset Network Settings
    2. Confirm that you want to do this and the phone will restart itself
    if that doesn't work restore the phone in iTunes, but you will want to sync all of your data before you do that.

  • WRT54G3G-ST - Connection is up but I cannot browse

    I have a WRT54G3G-ST with a PX-500 Sprint Aircard. If the connection is left idle for 6 - 10 hours it stays connected but I cannot browse or ping outside my local network, basically I cannot browse the Internet at all. The connection says it is connected. If I ping a valid Internet address from a command prompt or the router it fails. If I reboot or powercycle the router everything works fine. Anyone else seeing this?

    I believe this is happening to me.   Just started a few days ago.   If I rebooted and/or powered down the equipment, usually the signal would return.   I am a router newbie.   how do I reflashing the router's firmware?    What is so weird with this is that I can not surf the new with firefox or internet explorer, but I can send and receive emails though outlook on my personal PC.   On my work laptop, if I am not logged in through the VPN, I can not surf the net.   If I am logged in through my VPN for work, I can access the internet.    So instructions would be helpful or reference to a published doc.   
    Also, does anyone know how to change your email address on this board?  for the life of me, I can not find a place to do that.
    Thanks!
    junebuggnc

  • Extreme Problem - Cannot browse, or even connect.

    Setup: Airport Extreme connected to Unwired (ISP) ADSL modem by ethernet cable. Local ISP (Australia) ramps down the speed to dial-up speed if monthly download (1GB) limit is exceeded - that is the situation now.
    Problems: (1) I have an I-book that is "connected" to the airport, but the web browser (IE) cannot browse. I keep getting a "connection failure" message. Internet Connect shows a successful connection tot he wireless and to the internet.
    (2)I also have a PC connected to the Airport by the ethernet cable and can browse OK (but slow). However, if I try to connect the PC by the wireless to the airport I get the message that Windows cannot make the connection.
    The signal strength of the wirelss is very strong for both computers.
    I have called the ISP (Unwired) to see if there is some sort of hardware control info they need. No, they say to put everything in automatic.
    I have reset both the modem and the Airport's configuraqtion for maximum availability, and have left them off for a few minutes.
    Thewre is WEP encryption, but I have included the passwords when necesary.
    Any ideas?? Many thanks!

    gschelz, Welcome to the discussion area!
    Sounds like your iBook is experiencing a DNS problem. See KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • Cannot browse Netflix, only can see instant queue.

    When I open Netflix on Apple TV2 I no longer can see "Suggestions for You", "Browse", "Movies"...etc.  I can see instant queue, and logout.  I restarted and get same results.  Anyone else? 

    I've had similar issues with the Macs on my network (including the Mini on the TV); I generally cannot browse the streaming catalog with images and lose various levels of connects to Netflix CDNs (I usually lose all images of titles, in most cases cannot access the stream, in some cases can access the streams). This appears in my case to be a Mac specific issue (Windows machines, iPad, iPhone -- even Ubuntu, though it can't stream, can browse the library and get images from the Netflix CDN). Unitl today, a router reboot, clearing all caches and cookies, and some screaming would seem to get it working again ... Netflix (via phone) told me to contact Apple; their support script for Safari isn't even for 5.1 ... ugh ...

  • Cannot Browse Album Covers

    Hello All, first time posting here....hope someone can help! I have upgraded two versions of Itunes for my PC, the and I still cannot browse album artwork. I can see artwork for my playlists and main library, but when I click the far right button, I guess it would be called the Cover Flow button, I get a message saying "Itunes is unable to browse album covers on this computer."
    I installed Itunes for my gf last night on her pc, and that feature works great, but not on mine. Am I missing something?
    thanks,
    Kelly

    Thanks for the link, most helpful article! Looks like my video card is probably not updated, so looks like I'll have to update the drivers or may get a new video card, been wanting to get one anyways. I've downloaded a driver for my card from the SIS site, now it's in a zip file and I don't know how to open it! I'm running something called WinRar (i think)

  • Cannot browse the net

    i recently purchased  WRT54GS and since the day i bought it i am having this issue where i cannot browse eventhough i see the the wireless network connection icon strength showing either excellent or very good, several times i have taken online help on the linksys site but the problem remains, its just very frustrating, would some one please help??????

    You must setup a router first through a wired connection. If the computer works through a wired connection you can deal with the wireless side.
    Have you changed the router password from "admin" to something else?
    Have you change your SSID from "linksys" to something else on the router?
    Have you configure wireless security?

  • Cannot browse phone or synchronise

    Hi
    I was wondering if somebody could help me. I have Nokia N70 and my set up is as follows:
    - Windows XP SP2
    - PC Suite 6.70.22
    - Connected via USB cable connection
    My phone used to connect to my PC and synchronise with PC Suite and Microsoft Outlook fine. However, recently it just stopped. I have looked all over the discussion forums and tried everything - uninstalling and reinstalling PC Suite, uninstalling and reinstalling the USB device drivers, deleting all calendar entries etc. The error message I get when I try to synchronise is "PC Sync has encountered a problem and has terminated the synchronisation." Also, I cannot browse the phone via Windows Explorer - when I click on Nokia Phone Browser\Nokia N70 an error dialog appears that just says "Operation could not be completed." The phone USB device drivers appear to have installed correctly in the Device Manager (on some installs they didn't but I ran the Nokia PC Suite Cleaner and afterwards they installed fine).
    Any help would be appreciated. I'm beginning to think my PC is fine but my phone isn't.
    Thanks
    Mik

    It helps if you can provide all relevant data, otherwise I will just end up suggesting nonsense.
    It seems the new profile thing has something to do with this, but I cannot suggest anything.
    About the browsing problem:
    I am sure you have read the "32dll" - fix suggestion from this forum (I let you dig it up though :-) for the operation could not be completed. It is normally for XP SP´1, but if you do a lot of editing in your PC on your own, that might help.
    If not, unistall again and run PC Suite Cleaner from www.nokia.com/pcsuite -> support and install PC Suite 6.70.22 again.
    Good luck.

  • Cannot browse through bookstore by title

    I cannot browse through the bookstore by book title. I only see an author list, which is not really usefull. Untl now, I haven't found a function how to switch between author and title view.
    I own a iPhone 4S with the latest iOS version. On my iPad I can browse by title.
    kr
    Michael

    Just to update, don't know for what reason now I'm able to access the internet thru proxy after establish the VPN connection to my office.
    I did not change any setting at all and suddenly able to access thru proxy but I just can't ping the proxy server ip, the rest server ip I'm able to ping...strange...

  • Cannot browse to Outlook webmail - Firefox, Mac

    I have Firefox 35.0.1 and OS X Yosemite 10.10.1
    On Firefox, I cannot browse to webmail.oxfam.ca.  I can do so on Safari on the same computer but on Firefox, the wheel just spins, Connecting... and eventually it times out and I get a blank page with an error message.
    I've looked for solutions on line having to do with supported browsers, changing History and Security settings, and I can't find the solution. Cookies and cache have been cleared.
    I can get to OWA on my other Mac on Firefox.  It's running Mavericks instead of Yosemite and the add-ons/plug-ins are a bit different from between the 2 Firefoxes but don't know which ones - if any - to change.
    Any suggestions?

    Hi HewsieQ37,
    According to your description, I understand that you cannot use Firefox 35.0.1 logon OWA on Mac, however another Mac with same version works fine.
    If I misunderstand your concern, please do not hesitate to let me know.
    Firefox is supported for Outlook Web App when it runs on Exchange 2013, for your reference:
    https://support.office.microsoft.com/en-us/article/Outlook-Web-App-%E6%94%AF%E6%8C%81%E7%9A%84%E6%B5%8F%E8%A7%88%E5%99%A8-7bb72d5f-0b1d-47f6-bd6f-2623ab3aeed8?CorrelationId=9751a8d8-22ab-4e56-bf9a-422559b1419c&ui=zh-CN&rs=zh-CN&ad=CN
    Besides, since other Mac with same browser works well, it indicate that the issue may be related to client.
    During my research, I suspect the problem may be caused by Mavericks.
    Please try to update to latest version, meanwhile you can contact Mac support team so that you can get more professional suggestions.
    Best Regards,
    Allen Wang

  • Cannot browse other time machine backups

    I cannot browse other time machine backups on my time capsule. I hold down the option key and select "browse other time machine backups in the menu bar icon and I see no backups. Then I mount the time machine backup disk and I only see the the backup for the machine that I am using to do this. However, there are backups for two machines on that disk. One is called "outis" and the other "phaedrus". On the phaedrus machine, outis is not browseable and on the outis machine, phaedrus is not visible.
    I set up a test account and the test account could only browse the backup for that machine and not the other.
    How can I see all of the backups?

    kathigitis wrote:
    Am I mistaken or should all of this not happen and be available as soon as the TM disk is mounted?
    I just checked and it works the same way for me so I guess not. you need to mount the other sparse bundle first before you can browse it.
    That is to say, both backups are visible.
    Should I now revert to disk password in the AP utility?
    you can try and see what happens. the above method should work then too.
    Message was edited by: kathigitis

  • Cannot browse dimension members of a cube in Dashboard Designer

    I have a very frustrating problem. I'm trying to make some very basic BI Dashboards on SharePoint 2013 using Dashboard Designer.
    I have a cube that I've created in on SQL Server 2012 using BIDS. It builds/deploys/processes just fine and I can browse it in BIDS. When I add a new Data Connection in Dashboard Designer, I can connect to the cube using Secure Store and everything looks
    hunky-dory.
    However, when I go to set the Time dimension, I run into an issue. I can pick my Time Dimension, but cannot browse the members to select a date. I get a pop error that says "Invalid parameters when querying for the child members of a member or dimension
    dashboard designer data connection time." If I ignore the Time dimension and just try to make a basic Analytic Grid, I can't even see my dimensions or measures.
    I'm working with SharePoint 2013 and SQL Server 2012. I've already install the SQL Server 2008 R2 AMO dll on the SharePoint server.
    Any advice, or even where to look for what the problem might be, would be great, thanks.
    [Edited for clarity.]

    Hi Dave,
    Did you manage to find out what the issue was?  I'm having the same error message and wondered if you'd been able to solve it.
    Many thanks

  • DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

    Hi,
    We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
    I receive this error message:
    DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
    1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
    3. HyperV role is not installed on DPM server.
    4. Automatic mounting of volumes is disabled on the DPM server.
    1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
    2) Otherwise perform a full restore of the virtual machine.
    ID: 958
    Details: Internal error code: 0x80990F4E
    One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
    this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data. 
    The updates that were installed are:
    DPM Server
    KB2977629
    KB2966828
    KB2988948
    KB2993651
    KB890830
    KB2977765
    KB2894856
    Protected Guest system
    KB2972213
    KB2977629
    KB2894852
    KB2973114
    KB2993651
    KB2988948
    KB890830
    KB2977765
    KB2894856
    Any advice? Thank you in advance for any help.
    Andras

    Hi,
    Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

Maybe you are looking for