Cannot build WINDOWS 2000

Project "EventProcessing" loaded
Project settings saved
Building "EventProcessing"
No sources to compile
Build failed
I get the above error, the toolkit just cannot find the source files. Any Windows expert around can help. I am a beginner here.
k

Ok got it corrected. thanks... my mistake.... the source file got named xyz.java.txt.
It compiles fine now
K

Similar Messages

Cannot load windows 2000 (sp3) on pm8m2-v with single sata drive

I'm using a single WD 80GB SATA Drive (wd800jd) on the pm8m2-v mainboard's via sata controller. I've gone through the hit F6 and selected the windows 2000 ata/atapi driver and the raid driver (both separately) and the OS install always says it finds no hard drive. Then I tired both ata/atapi and raid driver for windows xp (even though i'm attempting a windows 2000 install) and it actually finds the drive, but after formatting and copying files, i get an inaccessible boot device failure when it reboots to begin setup. i've downloaded most recent mobo drivers and bios (the bios on the web is actually older than the one on the board? - web has v1.1 and the board has v2.0) ideas???

got it workin with the most recent xp driver from the site... strange

Why Can't I Run Windows 2000???

I cannot install Windows 2000 Pro. HELP!
I have:
K7T Pro2 V.1 (MS6330 V1.7) motherboard
VIA KT133 (552BGA) Chipset
VIA VT82C686A (352BGA) Chipset
The latest BIOS flash (6330v34.exe)
The latest VIA Chipset 4in1 drivers (4in1443v.exe)
AMD 1ghz Athlon
No weird, extraneous hardware
When I try to install Win2KPro, either from an upgrade or clean install, I keep getting the following error messages:
Incompatible Hard Disk Controller
and later,
STOP! Inaccessible boot device.
I have scoured the Web, the VIA website and the MSI website for help with this problem, and found nothing. During the install, if I hit F6 when prompted to install 3rd-party mass storage device drivers, I get nowhere with the VIA drivers, because setup is looking for a file called "textsetup.oem," which doesn't seem to be part of the VIA drivers package. YIKES!
Am I screwed with this mobo/chipset combo, or is there really a way to install Win2KPro with my setup? PLEASE post DETAILED instructions to help me in my time of need!
Thank you! You must remove "HATESPAM" from my email address when replying... ;-)
zippy2000

Quote
Originally posted by zippy2000
Thanks, fire, for the reply.
Somehow I don't think the problem is a bad HD. It's been merrily (as much as that is possible) running Win98 for 2 years, now.
I strongly suspect a MSI mobo/VIA chipset hassle here.
Can Win2kPro be installed on a K7T Pro2 (NOT Pro2-A!)??
Surely SOMEBODY at MSI knows the answer!
zippy2000
Yes its possible to run Win2KPro on this mobo. I have the same mobo and i had no problems with installing Win2KPro. Do you have a raid-controller? If you have one do the following. If you boot the Win2KPro cd-rom you will be asked to install drivers for your raid-controller, insert your floppy with the drivers of the raid-controller.
If do not have a raid-controller i don't know what the problem can be, i'm sorry.
Greetz,
Marco B

Cannot print character mode in windows 2000

Hi,
When I try to execute a character mode report using a network printer the report does not run correctly (prt sheet size, escape sequences etc.).
There are three machines involved in this problem:
1) A Windows XP Professional running reports developer. This machine was used to develop the report. It will be reffered as WXP in the future. These are version details of this machine:
Report Builder 6.0.8.24.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.21.0
Oracle ORACLE PL/SQL V8.0.6.3.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.18.0
Oracle Tools Common Area 6.0.8.18.0
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.8.24.0
Resource Object Store 6.0.8.21.0
Oracle Help 6.0.8.24.0
Oracle Sqlmgr 6.0.8.18.0
Oracle Query Builder 6.0.7.1.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.22.0
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.38.0
Oracle Image 6.0.8.20.0
Oracle Multimedia Widget 6.0.8.20.0
Oracle Tools GUI Utilities 6.0.8.20.1
2) A Windows 2000 Server machine running reports runtime and accessed via windows terminal server. It will be reffered as W2000 in the future. These are version details of this machine:
Report Builder 6.0.8.24.0
ORACLE Server Release 8.0.6.0.0
Oracle Procedure Builder 6.0.8.21.0
Oracle ORACLE PL/SQL V8.0.6.3.0 - Production
Oracle CORE Version 4.0.6.0.0 - Production
Oracle Tools Integration Services 6.0.8.18.0
Oracle Tools Common Area 6.0.8.18.0
Oracle Toolkit 2 for Windows 32-bit platforms 6.0.8.24.0
Resource Object Store 6.0.8.21.0
Oracle Help 6.0.8.24.0
Oracle Sqlmgr 6.0.8.18.0
Oracle Query Builder 6.0.7.1.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle ZRC 6.0.8.22.0
Oracle Express 6.0.8.3.5
Oracle XML Parser 1.0.2.1.0 Production
Oracle Virtual Graphics System 6.0.5.38.0
Oracle Image 6.0.8.20.0
Oracle Multimedia Widget 6.0.8.20.0
Oracle Tools GUI Utilities 6.0.8.20.1
As you can see, all versions are exactly the same in both machines.
3) A windows 98 machine with a epson fx-880+ printer atached on it. It will be referenced as W98.
When running the report from the WXP machine, directing the output to the W98 Epson FX-880+ it works fine: all escape sequences takes effect, the speed is good and the aligment is ok. But when running the same .rep report from the W2000 machine, directing the output to the same W98 printer, the escape sequences doesn't work and, worst, are printed. As a consequence of this, the aligment is wrong.
All of this was done to try to fix this problem:
1) The latest patch available for reports 6i is patch 15 which you can download from metalink -> patches -> Simple search -> patch number = 3171855. You can apply the latest patch and test (Raghavendra from metalink)
2) Apply the spool raw datatype workaround in Windows 2000, following these steps:
* Click Start , point to Settings , and then click Printers.
* Right-click the printer that you want to use and click Properties.
* On the Advanced tab, click Print Processor.
* Click Raw in the Default data type box.
* Click OK to confirm changes.
* On the Advanced tab, clear the Enable advanced printing features option.
* Click OK to confirm changes.
(From metalink Note:178433.1)
3) Edit the wide.prt file using dos edit instead of notepad, and using CTRL+P + ALT18 to obtain the ESC(18) character (just the same thing that was done in WXP machine) (From OTN Forum)
Does anyone wave any other idea?
Thanks,
Vinicius Pacheco

I'm replying my own question to inform what happens if anyone is facing same situation.
Initially thanks to Bob for your sugestion. It works! But not at first time.
I don't have administrator permission at the remote machine (W2000) to change the printer settings. So I made a request to the people who has. They made the changes, but the report still not working. After some tries we saw the reason: all the changes was for their user only. In my user this changes weren't active. So there are some things to check in this situation:
1) If you are not administrator, check if the changes made by another people are in effect in your account;
2) In some way your local printer definitons affects the remote printer (don't ask me why!!!), so check you local printer definition too.
I hope it helps!

I cannot start my OMS service on Windows 2000

I tried starting Oracle8i OMS Service on Windows 2000. I cannot
start it automatically so I started it manually. But Irecieved
an error message saying No application Error, some configuration
error with the Operating System.
On searching forums for DBAs i recieved a solution to manually
start by command 'oemctrl start OMS'. It did not help either as
the resources.ora file was not present at the location
C:\Oracle\admin\orb\resources.ora .
I found a resources.ora at location c:\oracle\ora81
\orb\admin\resources.ora but this file is empty.
NOW Wwith the command 'oemctrl start OMS' I am getting the
following error msg. Please send me the answer if possible at
[email protected]. WHERE Can I find the content for
resources.ora??
C:\Documents and Settings\Administrator>oemctrl start OMS
OEMCTRL for Windows NT: Version 2.1.0.1.0
Copyright (c) 1998, 1999 Oracle Corporation. All rights
reserved.
Starting the Oracle Management Server... [main][2001-11-
10:12:28:10:630] VdbSess
ion.processError: errorCode >1017<
[main][2001-11-10:12:28:10:710] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:10:830] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:10:970] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:11:381] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:11:421] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:11:541] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:11:691] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:102] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:12:142] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:12:262] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:12:413] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:493]
Error starting Oracle Management Server.

I got the same problem.

Javac "error: cannot read ..." windows 2000

I have installed jdk1.4.1 on my ibm with windows 2000. Whenever I try to compile a program, I get the message "error: cannot read: filename.java 1 error" Please let me know where I am making a mistake. Thank you.

No, you place the "" around the name when you save it. This prevents the .txt from being added to the name. This won't allow it to be compiled. I "solved" the problem another way by saving it with All Files and I type in filename.java. This works fine, but I do wonder why the .txt is added on my Windows 2000 machine, but not my Windows XP machine.

Cannot smb to Windows 2000 Server share (works in 10.4)

After installing a fresh copy of Leopard on my macbook pro I cannot connect to a previously working share on a Windows 2000 Server using smb. I am using Go > Connect to Server to connect.
I am prompted for a username and password but the connection fails with Error code -43.
Here is my Console info.
11/26/07 12:13:08 PM /System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent[459] Enumerate shares failed!: syserr = No such file or directory
Any help is appreciated!

I found a work around for this in another thread. Thank you gnaegi.
Below is what was posted...
Open Terminal.app from /Applications/Utilities and then enther the following:
mkdir myshare #(do this only the first time)
mount -t smbfs //[email protected]/sharename myshare
When you work this way you should unmount the share before you log out, shutdown or put the computer to sleep. To do this, open the Termina.app and enter:
umount myshare
The mounted share is now in your home.

Reports Builder doesn't start in Windows 2000

Hi all,
i've installed Oracle Developer Suite 10g on Windows 2000 Pro (SP4). Installation procedure ends succesfully, but when i try to launch Reports Builder the process rwbuilder hangs up.
Someone can help me?
Thanks. Matteo.

Hi Jon, thank you for your support.
I've stopped my scan virus, but the process rwbuilder still hangs up...and my path name doesn't contains any spaces!
Other ideas?
I've installed Developer Suite 10g and Enterprise Manager 10g in the same machine, but in different Oracle Home and the only Reports Builder doesn't work...the other applications (SqlPlus, Forms Builder etc..) works fine!
Regards, Matteo.

Cannot install Netweaver CE on Windows 2000 OS - SAP note says I can!!!!!!

Hi ,
I cannot install Netweaver CE on Windows 2000 OS, but SAP note says I can... Can anyone reply back if there is any workaround?
Thanks
Som

Hi Som,
Netweaver CE is supported by following Windows series:
Windows XP Professional (Service Pack 2) or Windows 2003 Server (Service Pack 1)
The version has also been tested successfully with Windows 2000 (SP3) and Windows XP (SP1), but is certified only for the two Windows versions above (Note: If you use a Windows XP account without a password , SAP Management Console can not start/stop your instance via Web Service - use system services instead)
For more on Netweaver CE installation check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1011818d-1abe-2910-5897-f72eb59c951a
Regards,
Subhasha

My Windows 2000 PC cannot find driver to "install" new Ipod..

I have Windows 2000 on my PC..I installed Service Pack 4 (required for it to work in Win 2K)..when I plug in the new (just bought it today) 30 GB Ipod (after of course installing ITunes, etc)..my PC cannot find any drivers for it..I tried having it search the enclosed CD....& every other option...Can anyone help?..(I still use the older USB version on this PC....it, the USB port "see's" it..(the USB port work's) ..but it say's there's no drivers to be found)..What is the problem?..Anyone else have this problem??..Thanks in advance for the help..& I'm looking forward to participating in these discussions!....

No..in Control panel it's a "Virtual Clone Drive"..When I first plug-in the iPod..It say's New Hardware Found..searching for drivers..none are found...In iTunes..if you try to Export any tunes..it just show's as a Virtual Clone Drive...It need's a driver for it...

Cannot install Windows Exchange 2013 SP1 64x non-checked build

Hello every one.
I have a problem to setup a lab asigment for school.
I have 2 Windows 2012 standard server
1e AD, DNS, IIS
2e Exchange 2013 SP1 64x
i prepared AD and installed al the features needed for AD and the Exchange server.
But when i run the readines check before i install Exchange 2013 i get to following warning
Warning:
A checked build of the operating system is installed. This can cause system instability issues including crashes, hangs, and other performance problems. It's highly recommended
that the operating system be reinstalled with a non-checked build.
For more information, visit: http:// technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.OSCheckedBuild.aspx
I cant find out what to do, thear is no Boot.ini file in Windows server 2012, any one any idea's to solve this problem
Thanks for the help,
Greatings,

Hi,
Agree with Ed. A checked build Windows is used for debug. Before installing Exchange 2013, please make sure that you use a free build. I'm afraid that you need to reinstall the OS.
What's more, you can refer the following screenshot to determine which Windows build is running. Generally, it should be Free build.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Cannot install version 7.4 on my windows 2000 PC

I have just bought an 8GB Nano but when I try to install it I am asked to upgrade to latest version above 7.4. However, iPod no longer supports Windows 2000 above version 7.3.2. which is the latest version on my PC. How can I get around this?

You can't get round this except by upgrading your operating system. iTunes 7.3 is last version to work with Windows 2000.
Your only alternative is to manage your iPod with third party software, some examples:
Yamipod
http://www.yamipod.com/main/modules/home/
Foola
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
anapod
http://www.redchairsoftware.com/anapod/
EphPod
http://www.ephpod.com/

Cannot start the setup of Oracle Client 8.1.6 on Pentium 4 Windows 2000 Professional

I need to install the Oracle Client 8.1.6 on a Compaq Evo D500 Workstation running Pentium 4 1.5GHz with 20G hard disk 128MB ram with OS Windows 2000 Professional. The autorun screen popup but no response when I press the Install/Uninstall products. The machine had installed the Oracle Developer/2000 runtime and running healthy. Does anyone know the fix for this problem?

I have the same problem with 8.1.7 on an ACER Veriton 7200 1.7 GHz , 20GB + 120 GB HD 768 MB Memory.
It happens under NT 4.0 Server SP6 and 2000 Server SP2.
The changing of Graphics Card from AGP to PCI does not solving the problem.
Different graphics resolution and colors also.

Cannot Shutdown OC4J on Windows 2000 Pro

I have just upgraded my networks OS from Windows NT4 to Windows 2000 Pro.
We are using 9iDS R2 and since the upgrade the Shortcuts to Shutdown OC4J have stopped working. Is this a common side effect of the OS upgrade? What is the solution?
Thanks

Put the 'pause' command at the end of stopinst.bat, so you can at least see the error message before the command window closes.
If it is 'invalid password', than run originst.bat before starting OC4J again.

Cannot send Internet Mail with Netscape Messenger 4.2 on Windows 2000 Server

I can send internal mail with all my users and receive external mail, but when I try to reply or send to an external address, they just get SMTP Deffered and never get sent. What am I doing wrong?

Netscape Messaging Server 4.15 is not supported on Windows 2000. Only on Windows NT.
Sorry.

Cannot build WINDOWS 2000

Similar Messages

Maybe you are looking for