Cannot burn a playlist over more than one CD

I have developed the following problem:
If I try to burn a playlist which requires more than one CD, I get the usual message asking me if I want to burn on more than one audio CD to which I reply yes. Once the first CD is finished I get the message to insert another CD which then proceeds to burn the songs already burned on the first CD instead of moving on to the next batch!
Also sometimes the song names etc are included on the burned CD but usually they are not.
Is this a problem particular to me or is it an iTunes 8 gift?
I have repaired permissions and this makes no difference.

patience, patience. You have to remember that no one gets paid here. We're all volunteers. Your question probably just slipped through the cracks.
OK
Yes you can use multiple drives. I do it all the time. I usually have one drive dedicated as my Capture drive where I keep all of my captued footage and then other drives for all of the other stuff, ie graphics, music, etc...

Similar Messages

Gridbaglayout over more than one panel

hi
i have a problem aligning my label / textfield combos.
there are several rows where each contains a label and a textfield. my problem is that they are distributed over more than one panel.
i have one gridbaglayout which manages my labels / textfields. what i want is that the labels are ALL the same width - it works fine for each panel but i cant bring that stuff to work that the widest label stands for ALL other labels.
i hope you can imagine what my problem is. please help since i am kinda unsuspecting ;)
thx

Hey,
Please download the application mentioned in it.
When i have excuted the application i could find sort enabled for all the columns.
wdContext.currentContextElement().getTableSorter().sort( wdEvent, wdContext.nodeTableSet() );
Please check it..
Jithin
Edited by: jithin james on Apr 16, 2009 10:47 AM

TableSorter over more than one columns like Excel

Hi Experts,
do you have a example for TableSorter over more than one columns like Excel?
Thank you very much.
regards
Steffen

Hey,
Please download the application mentioned in it.
When i have excuted the application i could find sort enabled for all the columns.
wdContext.currentContextElement().getTableSorter().sort( wdEvent, wdContext.nodeTableSet() );
Please check it..
Jithin
Edited by: jithin james on Apr 16, 2009 10:47 AM

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once.

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?

Restart your Mac. See if that makes a difference.

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downlo

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downloaded or ordered anything. Can you assist?

Download/install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html and activate it with your serial number.

Persisting CMP bean over more than one table

Hello,
I was wondering if it is possible to persist an Entity Bean over more than
one table using CMP. For example 3 attributes go in table A and 2 attributes
go in table B.
I can see this might come in handy when having some kind of inheritance in
your architecture.
Thanks,
Rein Reezigt

CMP are based on one DB object however object could be a database table or a
view. You can create a view and base your bean on that view. This is mostly
useful for read-only entity beans that just do select queries because databases
have all kind of different restrictions on update froma view, ( for example
ORACLE allows update to only one table in view). However in case you need a
logical abstraction of multiple tables, consider EJB2.0 relations or a product
like toplink for your object to relational mapping.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Rein Reezigt wrote:
Hello,
I was wondering if it is possible to persist an Entity Bean over more than
one table using CMP. For example 3 attributes go in table A and 2 attributes
go in table B.
I can see this might come in handy when having some kind of inheritance in
your architecture.
Thanks,
Rein Reezigt

Can I have one cell in a table extending over more than one column?

I'd like to be able to have a table in which some cells extend over more than one column.
In Word, I can just delete the right hand cell border, and the cell automatically stretches over the next column.
(Pages 5.2.2.)
Thanks

Pages v5 is not an MS Word clone, and therefore, it doesn't matter what you did in Word. Select the adjacent table column cells, and then either two-finger tap, or right-click and choose merge cells from the contextual menu.

Stmfadm A host group member cannot be a member of more than one host group

Hello, i setup solaris & make it FC target for my test ESX cluster.
ESXi nodes has not local disk (to boot from), so on solaris side I setup 3 zvol and try to export them to my ESXi host. 1 & 2 zvol to setup ESXi it self & boot from it.
3-d zvol to datastore purposes, store & run virtual machine.
But I have problem with lun masking.
I need following config:
ESXi1 - Lun 1,3
ESXi2 - Lun 2,3
I plan create 3 host-groups:
1 - ESXi1
2 - ESXi2
3 - ESXi1,ESXi2
But it is imposible, it seems there is limit in stmfadm
In manual page I can see: "A host group member cannot be a member of more than one host group."
Can you advice me any solution?
Alex
Edited by: 1009729 on Jun 4, 2013 9:18 PM

Hello, i setup solaris & make it FC target for my test ESX cluster.
ESXi nodes has not local disk (to boot from), so on solaris side I setup 3 zvol and try to export them to my ESXi host. 1 & 2 zvol to setup ESXi it self & boot from it.
3-d zvol to datastore purposes, store & run virtual machine.
But I have problem with lun masking.
I need following config:
ESXi1 - Lun 1,3
ESXi2 - Lun 2,3
I plan create 3 host-groups:
1 - ESXi1
2 - ESXi2
3 - ESXi1,ESXi2
But it is imposible, it seems there is limit in stmfadm
In manual page I can see: "A host group member cannot be a member of more than one host group."
Can you advice me any solution?
Alex
Edited by: 1009729 on Jun 4, 2013 9:18 PM

Is it possible to synch a folder (or image) over more than one LR catalog?

For example: I have a Lightroom catalog for business photography and a Lightroom catalog for family - occasionally I will have photos that belong in both categories, I would like to have the originals accessible by both catalogs with changes made in either catalog synchronised to the other.
I am using LR 5.6
thankyou,
Michael

Sure you can... however you would be best to have just one catalog as it is tricky keeping files in more than one catalog in sync and knowing what changes have been made where and when.
Try using different Collections for business and family. I have over 500k files in one catalog....I use collections for clients and other needs.

Can I split a spreadsheet table over more than one page?

Is is possible to split a table so that data can be linked from page to page?
I would like to have a table with formulas on page 2 referencing data from another linked table on page 1 of a Pages document.
I know this used to be possible in Appleworks. In fact I have some old Appleworks docs like this, but when I try to open them in Pages they get scrambled. Any ideas anybody?

Thank you both for your help. It sounds as though the answer is "No, this can't be done"
Neither of the 2 options suggested quite fit the bill as my document is a text document report with embedded tables, which do need to refer to each other across more than one page, but still needs to be well laid out for printing and easy reading by others. It seems strange that something which was easy to achieve in Appleworks should be impossible in iWorks, since I thought this was meant to be the replacement program after Apple stopped developing Appleworks.

Voiceover over more than one clip

I am trying to make a voiceover that spand more than one clip however the tool only seems to let me speak for the length of the actual clip rather than rolling on to the next clip and so on.
Am i trying to do something i Movie cant do or is there a trick i am missing

You need to put the multiple clips on a higher track and extend them so that handles exist. Then nest, and shorten the nest to fit into the space allotted. Then apply dissolve.
Nest will end where it ended when you created it. So make it long (including 'handles'), then place into its space in the timeline, then apply dissolve---or leave it on a higher track and apply dissolve there.

How can I use the RMS.vi over more than one period?

Hi everyone,
I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
Thank you for your help,
User
Attachments:
Forum.vi ‏76 KB

User_1979 wrote:
....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
It gives the RMS value of only the newest set of data.
The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.
In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
Richard
Attachments:
rms.gif ‏14 KB

Impossibility to burn a DVD of more than one hour

My application consists to develop diaporamas of photos with imovie to take advantage of the potential of imovie compared to diaporamas using iphoto.
I have 7 diaporamas of 10 to 15 minutes each for a total of 78 minutes
A first step was to burn a subset of these diaporamas for my grand children, each of them of less than an hour ( 55 to 57 minutes ). That was done without any problem.
A second step was to burn a DVD of all diaporamas. I switched from best performance to best quality. Information on the projest was:
DVD capacity: 2,6Go
Menu; 1 first level ( aquarium2 )
Traks: 5
menus: 3
Duration: 77,36 minutes
Space available on the disc: 30,8Go
It seems that the first steps were processed properly. I saw the beginning of step2 ( menu and transitions ) and the beginning of the coding of the first sequence. When I came back the following morning ( I estimated a duration of the coding of about 4 hours ) the following message was displayed: " burning completed, erors were detected during the burning", but nothing was burned on the DVD ( virgin medium ? )
I also tried to make an image disc, with the same result. I have seen, working on a test DVD, that there is a step " multiplexing" before burning, and I suppose that the error occured during that step.
What do you think was wrong with my application. Thanks in advance for your help
Claude Finzi
I expect that you will understand my translation from french to english

To Beverly Maneatis:
Thanks for your answer dated 09/10. I did what was suggested in your message. To summarize, I have 8 slideshows1 to 8 ( I used the translation of the french word diaporama given by "Eurodicotom", an online free dictionnary of the European Commission, which, by the way, does not know the word "slideshow", nobody is perfect... ).
1- I burned: 1 2 3 5 7 56 minutes: no problem
2- I burned 5 6 7 8 57 minutes: no problem
3- I burned: 4 5 6 7 8 77 minutes: multiplexing error
4- I burned: 4* 20 minutes: no problem
* It seemed that the problem was due to slideshow 4 which was the only one not burned with problem
The slidehows dont seem corrupted...
Any other idea?

How to repeat a row when tablix columns print over more than one page

I have a tablix with 20 Columns. When this prints it prints over 3 pages (which is
OK). The first Column is the Name (in this case it is the
Project name). On Page 2 & 3 I want to print the Project name again,
so that a report user does not need to go back to page one to figure out which
project the columns are referring two. In Excel there is an option
"Rows To Repeat". I am trying to do the same in SSRS
2012.
I have tried links
like:
http://msdn.microsoft.com/en-us/library/dd207045.aspx
http://remicaron.wordpress.com/2010/01/05/how-to-get-ssrs-to-repeat-the-row-headers-tablix-2008/
http://www.sqlcircuit.com/2012/03/ssrs-how-to-repeat-column-header-in.html
These do not work
for me .... in fact they return an error msg
Can this be done?
Tx
Andrew
Andrew Payze

Hi Andrew,
If I understand correctly, there are 20 columns in the table. When it prints over 3 pages, the report should repeat the first column in all pages.
To freeze row header in the table, we can refer to the following steps:
The table should have a group. If the Name is already a row group, we can directly refer to step 2. Or we need add a row group grouped by Name ahead.
Right-click the table to open the Tablix Properties dialog box, then enable “Repeat header rows on each page” and “Keep header visible while scrolling” options under Row Headers category.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Repeating Frames running over more than one page

Hi I have developed an Oracle Report. It is a nomination form having 7 to 8 pages. FYI..Input is a Pin Number. So, the customer can either enter one pin or can select many pins from the browser and depending on the selection he needs to either print one form or many forms at a stretch. So i want a repeating frame to be enclosed all the other frames. But if i do that, then i am getting an error
"REP-1212: Object R_13 is not fully enclosed by its enclosing body" since the repeating i introduced spans over all the pages in the report.
Please let me know the solution for this asap.
Thanks in Advance

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

Cannot burn a playlist over more than one CD

Similar Messages

Maybe you are looking for