Cannot burn CD after upgrading to iTunes 8.0.2

I have tried repeatedly to burn a CD with new version of ITunes and the burn freezes at the beginning of the first song. Have wasted 5 blank CD's trying different song lists from various sources. Is there a fix, or is there a way I can reinstall ITunes to see if something happened during the upgrade install?
I am using the CD equipment that came with my Mac.

Had the same problem with the new update. I finally got back to my previous version by using system restore. After the restore I had to go to the "All Programs" list and click on Quicktime and iTunes individually to allow them to re-configure, then had to restart the computer again. After that all's well. My lbrary was intact.
I tried everything to get the newest version to work, including completely uninstalling my current versions of QT and iTunes, then downloading the latest directly from the Apple website, but, after 3 attempts, nothing worked. Guess I'll have to wait for the next update and try again.
By the way, your library is not actually stored in iTunes--it is stored in your Music folder, so you should not lose anything by uninstalling iTunes if you need to.

Similar Messages

Cannot burn CDs after upgrade to iTunes 6.0.1.3

I Can no longer burn CDs - Always get "unknown error 2122"
Have updated:
- optical drive firmware
- audio driver
- display adapter driver
- Intel chipset software
- CMOS BIOS
Tried but cannot access update for my motherboard's ATA bus driver
iTunes CD diagnostics string follows:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
INTEL_ D865GBF_
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX 5500\GeForce FX 5500
IDE\DiskMaxtor4D080H4_________________________DAH017K0, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskSPRING_MultiCard_SlotA0100, Bus Type USB
USBSTOR\DiskSPRING_MultiCard_SlotD0100, Bus Type USB
USBSTOR\DiskSPRING_MultiCard_SlotM0100, Bus Type USB
USBSTOR\DiskSPRING_MultiCard_SlotS0100, Bus Type USB
IDE\CdRomAOPENDUW1608/ARR_______________________A110___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomCompaqDVD-ROM_SD-616T__________________F304___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: Compaq DVD-ROM SD-616T, Rev F304
Drive is empty.
E: AOPEN DUW1608/ARR, Rev A110
Audio CD in drive.
Found 12 songs on CD, playing time 66:09 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:21:22
Track 3, start time 10:20:70
Track 4, start time 15:02:64
Track 5, start time 18:15:73
Track 6, start time 24:35:25
Track 7, start time 36:17:45
Track 8, start time 40:39:42
Track 9, start time 47:21:04
Track 10, start time 51:42:56
Track 11, start time 56:21:11
Track 12, start time 61:46:17
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 48.
The drive CDRW speeds are: 48.
The drive DVDR speeds are: 48.
The drive DVDRW speeds are: 48.
Any help most appreciated

Finding this Post took some time but I thought it was me talking when I read it. I was having the exact same issue. I have a G3 I've been upgrading like mad, including a Sonnet G4-500 CPU a Maxtor 60gb & 80gb HDs 1gb of RAM a new LaCie Firewire800 PCI card Graphics card etc. the latest was installing Panther 10.3.9 on the new 80gb HD and also swapping out the old CD-ROM and replacing with the (Apple standard) Pioneer DVD-RW DVR-110D combo drive in it's place. got everything up and booted and poof! no burning. Toast worked read/write no problem. iTunes could read and import no problem, but wouldn't burn a CD.
Downloaded "PatchBurn 3.1.3" installed, re-booted and all is OK in burner land again :>)
I wanted to just post my additional thanks to the lead to Patchburner, and I'm going to donate to the cause. It's worth a $20 donation just for my joy of not throwing this computer out the window!!

QuickTime in Safari cannot play video after upgrading to iTunes 10.2

After upgrading to iTunes 10.2 and QuickTime 10 on my MacBook Pro, the latest Quicktime version embedded in Safari is behaving strangely. When I want to play video on certain websites like " http://www.lynda.com/Aperture-3-tutorials/essential-training/59221-2.html ", the Quicktime logo on Safari browser appears and just sits there with sound only. I tried it on Firefox, the video can only be played on the lower part of my suddenly splitted screen, there is an "error" message on a Quicktime logo background.
Could anybody help me solve the problem. By the way, all these videos can be played normally on my Windows 7 desktop using both Firefox and Safari for Windows.

To make the matter more weird, the QuickTime plays normally on my Safari after I log out and switch to the administrator account of the MacBook Pro. When I change back to a normal account, the QuickTime error takes place again. It seems there must be something I configured wrongly.

Cannot delete tracks after upgrading to iTunes 9

I upgraded to iTunes 9 today. Added a 14 tracks from a new album. Then when I went in to the tag details to bulk edit the album name, it only edited 13 of 14 tracks. I selected only the last track to try and edit it singularly, but the tag info has been grayed out and I cannot touch it. I cannot delete this track, I cannot edit it, and if I delete the whole album, just this track stays.
I checked permissions and I have the rights to read write this track. The permissions for this one track are no different from any other. Help!

I've encountered problems similar to this. Here's how I've dealt with it.
First, carefully examine permissions issues and refresh the iTunes library info if necessary. If you don't have write permissions for the folder containing the files or for the files themselves, iTunes will refuse to rewrite the tags even though it appears to take. You can set this by going to the Finder and using Get Info. If you've already added the files to your iTunes library while they were write locked for you, you will need to clear them from your iTunes library. For this, I typically copy the source audio to another location, delete the original location, remove dead tracks from iTunes (using Doug's Super Remove Dead Tracks ( http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper )), then copy the files back to their original location (with all permissions issues solved) and trying adding to iTunes again.
Even trying this, I've found some strangely coded mp3 audio tracks that don't allow you to alter tags in iTunes. I've gotten around this by importing each mp3 track into Fission (third party app) and saving back out as a new file. Fission doesn't reencode the audio, so you don't get additional lossy degradation. Doing this will clear up the quirky file headers/wrapper/metadata to make it iTunes tag friendly. While this last solution is tedious, it does fix finicky files.

I cannot restore ipad after upgrading to itunes 10.2.2.14

Since upgrading my Ipad to latest revision of Itunes, I can no longer sync and it now requires a restore. I took the Ipad to Best Buy and they restored it, but when I connected it back onto my PC, same thing happens. When I goto restore screen and click on restore, the block of info that comes up with ref X says, Software for this Iphone is not currently available. Make sure you have the latest version of Iteunes and try again. I check upgrade and it says I am current. What gives.??? This is second time for me in last year after an upgrade once before.

Same problem but using Windows 7 32 bit (German version).
De-installing and re-installing iTunes didn´t help.
I "downgraded" back to iTunes 10.1.2 and the error vanished.
polydorus wrote about how to do it:
http://discussions.apple.com/thread.jspa?threadID=2770922&tstart=0
On FileHippo go to the iTunes page. On the right you´ll see earlier versions.
And I had to replace my library file with the back-up version from yesterday.
(first support link)

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

After upgrading to itunes 10.5, and connecting ipad 2, message appears " IPAD cannot be used it requires itunes 10.5 or later. Go to itunes store and download the latest version." I am windows xp user.

After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"

After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP. When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I have also lost sound when I attempt to listen to audio from a Website while in a browser session. I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
Please advise.

Something went wrong during the upgrade to iTunes 11. I have lost audio on my desktop PC running Windows XP. No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." No sound during browser sessions. The volume control icon disappeared from the system tray in the lower right corner of the screen.
It seems that an audio driver(s) were damaged or deleted. When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click Troubleshoot to start the troubleshooter for this device."
Please advise.

'Contacts' folder with sub folder cannot be removed after synching via iTunes

'Contacts' folder with sub folder cannot be removed after synching via iTunes
I am trying to remove a 'Contacts' subfolder
ie Contacts < default folder
- Contacts Mysubfolder 1 < Trying to remove this subfolder folder
via my microsoft outlook onto my iPhone.
Despite not having 'Contacts Mysubfolder 1' on my PC's outlook after deleting it, it does not delete the subfolder in my iPhone.
I even restored my iPhone settings to the original via iTunes.
I also replaced my physical iPhone but still synching with my original Apple ID + iTunes on the same desktop.
All I did was after replacement of my iP, i setup my microsoft Exchange account, and there it was, the Contacts subfolder which is no longer around, appears on my iPhone contacts folder list.
My outlook is on Microsoft exchange and I am on iP 3Gs
Please help
Thank you

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
tt2

Cannot access internet after upgrading to IOS 6.1.2 on iphone 4

cannot access internet after upgrading to IOS 6.1.2 on iphone 4.

ok here is the issue.
After i upgraded the IOS to IOS 6.1.2 I'm not able to use mobile internet as i have a data sim card.
As the settings provided by the service provider are not compatible with IOS 6.1.2 and the service provider cannot do anything about it, as it's something that has to be ressolved by apple.

Cannot view msgs after upgrading to IOS8

Cannot view msgs after upgrading to IOS8..I get the msgs but cannot open them..the screen just goes blank
I tried restarting..back up ..using a different sim..everything but nothing is working
can anyone help urgently its affecting my business big time
Thanks

I am having this same issue. I live in Korea and changing the language to Korean made the messages searchable, but when I changed back to English, the problem returned and I was unable to search all my messages via the search window in the messages app, but then, after about 5 minutes, the messages app crashed, and after that, the problem was resolved. Gotta sat that I'm so far unimpressed with ios 8; seemingly not ready for Primetime.

Anyone having issues with USB port power after upgrading to iTunes 11.1?

After upgrading to itunes 11.1, I can no longer use the USB ports on my wired keyboard to synch my iPhone 4s, ipod Nano, and Ipad 2. Previously, I could use this port to synch and charge the nano and iphone, and synch (but not charge) my iPad. Now I simply get an error when I attach any of the devices ("a usb device needs more power").
I currently use all four of the USB ports on the back of my imac (UPS power supply, aformentioned keyboard, a Lacie backup drive that has its own power supply, and a superdrive). Interestingly, when I unplug the Superdrive (which is plugged directly into the mac on a separate USB port), the USB port on the keyboard will work. Unplugging any of the other 2 devices does not allow the port on the to work.
I bought the wired keyboard to have the easily accessible UBS port to synch my nano as well as the fact I needed a number pad.

Get yourself a good self-powered 7 port USB hub to plug your extra devices into.
Belkin International, Inc F4U041v - Best Buy
PROVANTAGE: Belkin F5U237-APL-S Hi-Speed USB 2.0 7-Port Hub for Apple #TB857LL/A
NewerTech USB2HB7PRO 7 Port Hi-Speed USB 2.0 Hub... in stock at OWC
MacAlly TRIHUB7 TriHub - 7 Port Hi-Speed USB 2.0... in stock at OWC

Some mp3 files do not play after upgrading to iTunes 8.0

some mp3 files do not play after upgrading to iTunes 8.0
have upgraded and some songs which used to play on iTunes 7 no longer play. album art is missing. when trying to play on of these songs, nothing appears in the playbar at the top of the window.
it seems the same problem exists in the mac os environment.

The solution I discovered to fix this problem was to create a smart playlist with all song of a kind containing MPEG. Then I went through album by album, and coverted ID3 tags using the value of NONE. This then enabled me to play the songs in iTunes 8.0 and in many cases restored the Album Art.
Thanks!

Cannot burn CD after upgrading to iTunes 8.0.2

Similar Messages

Maybe you are looking for