Cannot burn DVD in DVD SP

I am trying to burn a DVD using DVD SP
I am taking the following process.
Export to .mov file from FCP
.mov file approximately 12 gig into Compressor
Compress file using the best 90 2 pass best VBR . average bit rate 6.2 mbps and maximum 7.7 mbps
Resulting files are .m2V and .ac3 respectively
I connect all elements in DVD SP and test with simulator. All working OK.
Proceed to burn (I have tried with both -r and +r DVDs) I have no luck. I get a message saying the DVD was unsuccessful. Not even the muxing process takes place.
Any suggestions would be greatly appreciated.

Are you getting a bitrate too high error?
Did you set the First Play? Have you check all of the links? Did you check your preferences? Is it set to SD DVD? Do all of your tracks have video?

Similar Messages

  • Cannot burn slideshow to dvd r 16x4.7gb

    i'am currently on iphoto where i completed a slideshow and exported it to my desktop..
    cannot burn slideshow to dvd+r 16x4.7gb is something i can do diffrently..

    What's the problem exactly? The file is too large? How are you burning it? We need clear information to help
    Regards
    TD

  • Cannot burn Apple supplied DVD-R

    I have a MATSHITA DVD-R UJ-815 (CD-RW/DVD-R) and cannot burn a DVD-R 2X purchased from Apple. Any suggestions?
    I got this burn message:
    "Burning disc: "Untitled DVD"
    An error occurred while burning the disc. This disc cannot be used."
    The disc then ejected and I got this message:
    "Burning the disc failed because this type of CD is not supported. (Error code 0x80020043)"
    Thanks,
    -i

    I'm having the same problem on the Superdrive on my eMac when trying to burn a DVD.
    "Burning the disc failed because this type of CD is not supported. Error code 0x8002043"
    I'm using Verbatim DVD+R. I compared them with other DVDs I've burned..they are exactly the same.

  • W5x0 cannot burn dual layer DVDs

    I bought a W510 as a host for a scanner in late 2010.  My T60p was having fan problems and I liked the W510 so much that I bought a W520.  Originally I was going to use the W520 for the scanner/photo processing but frankly the monitor on the W510 tunes up a little better so I'm staying.
    I've been trying, with no luck whatsoever, to burn dual layer DVDs.  The W520 came with Corel DVD software that does not have verify as an opction (I can't believe it but it appears to be true).  I use the W510 for most of it and it has the old tried and true Roxio.   I installed the Roxio on the W520 so they are equal.
    The two systems came with different DVD writers.  The W510 MAT**bleep**A DVD-RAM UJ8A0A and the W520 a HL-DL-ST DVDRAM GT30N.  Neither drive in neither system can works.  
    I can write about 1 of 10 discs on either system/drive (I've made a lot of coasters over the past month).
    At first I thought it was related to the Memorex media.  Last week before I went out of town I got some other vendors, and started with the Kodak discs but I'm getting hockey pucks at the same failure rate as Memorex, so I conclude the media is not the root cause.
    I also have an external USB drive, Lite On  with a HL-DT-ST DVDRAM GE24LU20 drive in it that also will not work.   The external drive says is it supports up to 8x write speed, but rarely gets above 3-4, but it still makes coasters.
    I've tried limiting the write speed to 2.4x but it still makes coasters.
    I can't believe with a 2 host, 2 drive matrix that there is a drive or system failure involved.  There just has to be something else going on. 
    Does anyone have any suggestions? 
    Thanks!
    Tony

    Another fact set. On the failures, 40% of them fail during the write, another 40% fail during the verify pass with a compare error, and the remaining 20% cannot be read after the burn.
    On my old system the reflectivity of the disc after writing was uniform. On the write failures you can see big gaps in the write band. Sometimes it fails in the first few minutes (before the capacity consumed would switch to the second layer).
    For others even when successful the reflectivity of the disc almost makes it look like the write portion didn't finish the write pad out to finish the disc, and I think some of the read errors are occurring in layer 1 past the transition region. The Roxio software has the option to finish the disc but the Corel burn.now and the included windows DVD ISO burner do not.
    Writing dual layer has never worked on my W510 but my T60p didn't have troubles. What I don't know is whether the difference is T60 to W5x0 or Windows XP to Windows 7.
    Again, any suggestions welcome.

  • Downloaded latest update, now I cannot burn projects to dvd's!!! I would have never updated if I knew I would loose that capability.

    I have a MacBook Pro  10.9.3 version.(Imovie version10.0.3)  I just upgraded my computer now I cannot save my project to a dvd.  I have spent hours trying to finda a way. I have read that others are having this same problem.  I have tried to follow what they suggest only to find that when I go to the file my files do not use the same wording.  That is why I as putting the kind of computer I have in this message in case that makes a difference.  For the record I do have Idvd, but it will not open my project.  It only opens those I already have completed.  Can ANYONE help me.

    I am having the same problem...but in my case I am trying to create an avchc dvd  (a high definition format play able in Blu-ray players using standard dvds). (Still struggling in fact...)
    If  you want to create a simple dvd of the MPEG-4 "project" you created in imovie.....have you tried letting "finder" burn the DVD for you?
    Go to: finder/go/computer/mac hard drive/users/macbook/movies in movie library......when you find your library (your path may be different than above)....highlight it, double click it, click "show package contents".....find your project...double click it....select "burn to disc".
    Good luck. Its not as simple as it apparently was before Apple discontinued idvd
    Best wishes
    Larry B.

  • Cannot burn a blank DVD+RW disk

    Since I installed Mountain Lion, this is the first time I am trying to burn data to a TDK DVD+RW disk. When I put the blank disk into the computer, the Disk Utility window opens showing the SuperDrive. It has to items: 1 Choose how to erase it and 2 Click Erase. Then I have to make the choice between earasing the data on disk Quickly or Completely. Since it is a blank disk, I chose Quickly. Once this finished, nothing else happened. In fact, no disk icon appeared on the Desktop at any time.
    I would hope that I would not have to erase completely every time I used a blank disk, since that takes an hour.
    There is nothing in the Disk Utility Preferences that apply to the disk.
    The mac will recognize a DVD+RW I created with Snow Leopard OS.
    Any suggestions to help me with this problem. My warranty has run out on the computer, so I can't call Apple.

    If you are using the correct format, then maybe you
    do need a third party utility like Roxio Toast which
    has offered multisession burning since before Disk
    Utility.
    Except that Toast does not support multisession DVD -- only CD. There's an article on Roxio's support site that explains the reason for not supporting multisession DVD: there is no standard for it. All the software that can burn multisession DVDs do it in a way that is not standards-based.

  • Suddenly says cannot burn cd or dvd for photos- suggestions?

    I often burn photos on DVDR or CD R   now it says it won't burn...any suggestions please

    Clean the lens on the burner.

  • Cannot burn to DVD in iTunes 6 - unknown error occurred [261]

    I'm having issues burning a playlist to DVD in iTunes 6 - it rejects the DVD and gives me an error message "The attmept to burn a disc failed. An unknown error occurred [261]." If I try to burn the same playlist to a CD, there is not a problem. In my "burning" preferences within iTunes, I have selected "Data CD or DVD", but when I pull the preferences up again, it only says "Data CD". I click this option again and it gives me "Data CD or DVD", but never seems to keep the "DVD" part of the option.
    I have been able to burn to DVD from playlists in the past, but I believe it was before I upgraded to iTunes 6.
    Any suggestions?
    HP Pavilion 6650y   Windows XP Pro  

    Correction: I cannot burn CDs or DVDs of playlists in iTunes 6.0.1. I have no problem burning CDs in other applications and could burn CDs prior to updating to iTunes 6.

  • Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R

    Hello all-
    I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
    If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
    Help.
    Thank you.

    I've tried several discs so it's not a faulty DVD
    I trust that is several different brands, not several different discs from the same spindle/pack?
    Media varies.
    http://www.digitalfaq.com/media/dvdmedia.htm
    If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
    You might also try burning in a new user account to rule out account software troubles.

  • Whats going on when after i have put my new project it tells me that cannot burn because my encode it too large for DVD

    I am trying to convert a video into a dVd i did one and it will not play on my blueray, but, at least it will do on my computer.  Now i am trying to do a different dvd and it tells me after i have downlowed my new project, that i cannot burn the idvd because it is too large check my encoded?

    The reason why your DVD will not play maybe your choice of disk.
    Was it a DVD + or DVD - ?
    Always use a good quality DVD blank disk, at least Verbatim and check what format your player will play.
    Next, to achieve the best quality export from iMovie, Share your Project to Media Browser.
    Then open iDVD and use the media button (bottom right) to import your movie.
    A possible reason that you are getting a too large error message is the time length of your DVD.
    The default setting in iDVD for Encoding is Best Performance (60mins) and you need to change this to either High Qualirty or Professional Quality which will allow more to be encoded on the disc (120 mins).
    iDVD > Project > Project Info > Encoding to change this setting and see on the Capacity slider if your project will fit.
    Otherwise check how much free space you have on your HD.
    Z.
    PS Slow your burn speed down to x4 for error free results.

  • Cannot burn dvd without theme

    I cannot do what would seem to be the simplest step in imovie and idvd. I have created my customize movie in imovie (no canned themes or audio) and when I go to the shre menu and choose idvd so I can burn my movie, I cannot burn a dvd without first choosing a theme. I don't need a theme...I wnat my movie just the way it is. Please help. This is so frustrating.
    barb

    've been a Mac user for 18 years and I'm disappointed and surprised with Apple.
    Why...? You accomplished what you wanted to do. It just took you some time to find that.
    iDVD 6 Getting Started
    Apple's iMovie Learning Site
    Apple's iDVD Learning Site
    General Learning Center
    Ken Stone: Authoring in iDVD 6
    My favorite, by far:
    iMovie HD & iDVD 6: The Missing Manual
    You can download Chapter four: Camcorder Meets Mac.
    iPhoto 6: The Missing Manual

  • Problem with iDVD - cannot burn DVD.

    Problem with iDVD - cannot burn DVD.
    Self has a MacBook Pro, which al new software.
    My problem is, when my burn a slideshow, prop process ever before burning.
    Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
    I have burn a Movie test – no problems.
    Self use Verbatim DVD-R
    Who can help - what should I do?

    How did you create the slideshow and get it in iDVD?
    As a general comment try following this workflow to separate the encoding and burning processes:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • TS1436 I cannot burn playlist because it says registry settings used by the itunes drivers for importing and burning cd''s and dvd's are missing. How do I fix this. i am running windows xp

    My Itunes will not let me burn a cd from a playlist because it says the registry settings used by the Itunes driver for importing and burning cd's and dvd'd are missing. It says to reinstall itunes. I have done that and I still cannot burn a playlist to cd's I get the same answer. How do I fix this?

    Hello Duneman51,
    Thank you for the details of the issue you are experiencing when trying to burn a disc using iTunes.  I recommend reviewing the following article for steps to troubleshoot and resolve this issue:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • After downloading lion does not recognize blank discs or dvd´s cannot burn anything

    I downloaded Lion and now my mac does not recognize any blank cd or dvd and I cannot burn anything, not with Toast 10, or with iDvd still not recognized.  Can someone help me??

    Hello
    I have been trying to fix a similar issue on my wife's PowerBookG4. I cannot pin point when it started, but she noticed it a couple weeks ago when she tried burning a disc. We have come to discover that her drive will no longer mount any discs at all (blank or otherwise burned discs or software). If I had to make a guess it had to have started in the last month or so after some recent update. Maybe 10.5.2? I am not sure.
    I am getting extremely frustrated with Apple though on this matter because I have been browsing multiple forums and seeing this exact issue over and over again and nobody seems to have a solution or correct diagnostic for it.
    I have tried zapping PRAM, I have tried many types of discs, brands, etc. and nothing works. I know this is a Software issue, it has to be. There are a LOT of people reporting this issue. If necessary I will start linking to all the different posts that I found in the last few days.
    Please post some help, ASAP. This has been a major inconvenience and I cannot believe that Apple hasn't discovered the problem with how many people have been reporting it.
    Thanks

  • Suddenly I cannot burn DVD on my Pioneer DVD-RW DVR-112D

    Hi, bought 100 DVD's of a brand I always used and suddenly I cannot burn these DVD's. Tried it with the Mac utility, Disk utility and Roxio Toast Titanium 10. No success. These DVD's do burn on myMacBook Pro running under the same MacOSX 10.6.8.
    Re-installed the OS, ran Applejack to repair any errors, but no success. Phoned Mac in Holland, no idea. What could be the cause and how do I repair it. I have 2 SuperDrives and both exhibit the same behaviour. Pioneer has several Firmupdates but only for PC, not for Mac.
    Regards,
    arnold

    Later (higher speed) DVD-Rs can require the latest firmware update in older drives to burn successfully.   I believe the DVR-112D is up to v.1.28: look here:
    http://www.pioneer.eu/uk/support/software/tax/950/index.html
    Even if there's only a "PC" updater, you still need to do the update.  Easiest way - temporarily install the drive in an external USB case, and connect it to a PC, and run the update from there. A pain, but necessary.

  • Cannot burn DVD (Domain users)

    Am experiencing a problem in my employer's network with regards to burning DVDs from Final Cut Pro X.
    When we click Share > DVD and hit go, the program starts "Processing", and once this bar fills up, it disappears without burning. The disc drive does not even spin up. I can tell why this is, becuase the Sharing Center window does not open.
    This only affects our domain users - logging on as a domain admin or a local admin on the same mac works fine and sharing centre will open. When logged on as a domain USER, the button to open sharing center isnt even present, its just entirely missing.
    We have to use domain user accounts, and right now they cannot burn from FCPX!! Does anyone know a solution for this one? I can only think its some kind of permission issue, but I can't think where to look to try anything.

    Why not simply "burning to HD" and then use an external tool (i.e. Toast) to burn the actual DVD? I always write to HD first for a final quality check.

Maybe you are looking for