Cannot burn DVD in Premier Elements 10 longer than 1 hour in Length

I cannot figure out why I have to limit my DVD projects to no more than 1 hour in PE 10. As long as I keep the timeline to 1 hour or less, the DVD burns just fine. If I try a project over 1 hour - 1 hour, 10 minutes for example - it compiles everything, starts to burn (from all appearances), suddenly says burning is complete, and I have a blank disc. If I try to burn the same file into either a 4.7 or 8.5 GB folder, the same thing happens, and the folders I want the file to burn to is blank. I have a 64 bit system, 6GB RAM, and plenty of hard drive space. I've tried setting the burn to "fit into available space" and also selecting most video( therefore lowest quality), and still, if it's over 1 hour, it will not burn. Any thought?

mfrayer1
Perhaps it would have been better if you started your own new thread on the specifics of your situation.
But lots of questions.
1. On what computer operating system are you running Premiere Elements 7 and 10?
2. When you say for version 10 "will not write to DVD or to a folder", where are you blocked...
a. burner is not recognized in burn dialog
b. transcoding errors
c. device errors
d. disc not recognized
e. goes to 99% and then nothing
f. other
In the case of burn to folder, everything above except a, c, and d
Do you have Nero or any other burn software installed on this computer? And, the old question "Is your computer optimized?" I ask this in spite of the fact that you do state that Premiere Elements 7 burn to DVD is working on the same computer. What are we looking at in terms of computer resources?
Have you reviewed the Adobe document on burn to disc troubleshooting?
ATR

Similar Messages

Burn DVD with Premier Elements 12

When I try to burn a DVD with Premier Elements 12 it gets stuck at 5%. I cannot cancel it. It just keep running. It was working before, but has not worked the last 3 times I tried it.
.

Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to disc (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

Cannot burn DVD from Premiere Elements 4

I have Premiere Elements 4. I am trying to burn a DVD of a slideshow I created in Photoshop Elements 6. I have burned many copies of this DVD in the past month successfully, in PE4. Now today all of a sudden it won't burn them any more. When I click on "Share" and "DVD", a message says the program has encountered a problem and needs to close, and the program locks up. Here is the detail of the error message:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Elements.exe
Application Version: 4.0.0.0
Application Timestamp: 46df9114
Fault Module Name: StackHash_a34a
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: a34a
Additional Information 2: c9c5f4fd744690d388ab9d5b3eb051a7
Additional Information 3: cb2e
Additional Information 4: 650bb5690556a17e911375b94d3e16f0
Can anyone help?
Thanks,
Teresa

Hi Thresa,
Forget about Premiere Elements 6 and use Premiere Elements 4, we still do on a new 64 bit Quad Core i7 Work Station Windows Professional and it runs better than ever. We have been doing HD 1920 x 1080 slide shows for 3 years, no problems burn to Blu -Ray or Export to Pro Tape.
I did have a problem with a Pentium 4 3.2Ghz and hyperthreading , but, discovered I had 1,440 temp files slowing the system down. Try %temp% in Search and delete files if you have any ?

Premier Elements 12 Cannot burn DVD Get error message of internal software failure

Cannot butn DVD with Premier Elements 12 Get error message of internal software failure.

Great news JMD103.
There should be a big red pop-up, when one adds a Stop Marker to the end of the Timeline, saying "Do NOT do that!" That Stop Marker will almost always yield a failed Project output to DVD.
Good luck, and happy editing,
Hunt

Internal Software Error during burn to DVD in Premier Element 9

During a burn to DVD in Premier Element 9 I encountered an internal software error (.\Vobulator\BlockPlanner\BlockPlanner.cpp line 215). What does this mean? What is the solution?

You'll be better served by posting your question in the dedicated Premiere Elements forum:
http://forums.adobe.com/community/premiere_elements?view=discussions
Ken

My computer shuts down with an "unrepairable hardware problem" when burning a DVD with Premier Elements 10

What causes my computer to shut down with a hardware problem while burning a video to DVD from Premier Elements 10?

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R

Hello all-
I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
Help.
Thank you.

I've tried several discs so it's not a faulty DVD
I trust that is several different brands, not several different discs from the same spindle/pack?
Media varies.
http://www.digitalfaq.com/media/dvdmedia.htm
If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
You might also try burning in a new user account to rule out account software troubles.

Problem with iDVD - cannot burn DVD.

Problem with iDVD - cannot burn DVD.
Self has a MacBook Pro, which al new software.
My problem is, when my burn a slideshow, prop process ever before burning.
Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
I have burn a Movie test – no problems.
Self use Verbatim DVD-R
Who can help - what should I do?

How did you create the slideshow and get it in iDVD?
As a general comment try following this workflow to separate the encoding and burning processes:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to import a dvd into Premier Elements 11 when file type is unsupported?

I am trying to import a DVD into Premier Elements 11 but it states that the file type is unsupported. Any ideas

Sam Batman
Your thread had apparently been transfer in the transfer process. Please see the duplicate which has already been responded to.
http://forums.adobe.com/thread/1277309?tstart=0
I will ask that the thread that we are in now be closed to avoid confusion.
Thanks.
ATR

Burning dvd with premiere elements 11

I burn video files on to dvds. I always key NTSC widescreen. Sometimes, the image fills the tv screen. Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen. How do I get the image to fill the tv screen?

Thank you for responding to my problem. I'm afraid the reading didn't help. All of my 20 files were created with the same camera, the same project settings, the same equipment, etc. But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall. Most however, have a 2" black border around the image. It makes no sense to me.
Date: Sun, 10 Mar 2013 10:32:25 -0700
From: [email protected]
To: [email protected]
Subject: Burning dvd with premiere elements 11
Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot burn DVD compilation

cannot burn DVD compilation on 2 different sets of media using toast,get these errors,have a screen shot,but we cannot submit attachments??
"ILLEGAL REQUEST
BUFFER OVER RUN
sense code=0x21,0x02
"

Please take the time to be very specific as to exactly what you are trying to do.
Give us a step by step of the content and exactly what you are doing and what you have tried.
Check the correct choice. DATA AUDIO VIDEO
Have you created a folder .
If you have your settings wrong for the files you are trying to burn, in other words if you are trying to burn AUDIO and your set to DATA. and visa versa.
Tell us more.
Cheers Don

HT201472 Is there any way how to find out where a particular device was when it last went online if longer than 24 hours ago?

One Mac Book Air was stoilen frm me, I can still see it on Find my Iphone and can see that it has been renamed. The computer was offline for longer than 24 hours, so I am wondering if there is any way how I can find out it's last online location?

No, you cannot find out where the computer has been. Find My Mac only shows you were the computer is right now if it is online.
I strongly recommend you change all your internet passwords immediately, notify the police (do not try to recover your MBA yourself), and your insurance company so you can get reimbursed and buy a new Mac. Once you have done all this go back to Find My Mac and click the "Erase" button.

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Reader X failing on Save and Save As, after the form has been opened for longer than an hour.

I'm wondering if anyone else has had this happen or maybe can offer a solution. I have several Dynamic XML forms designed in LiveCycle ES2 v9 that since our ministry switched to Reader X have been failing. At first, the save button greys out (even though new information has been inputed) and the form will only save as. Then the save as function will start to fail if the form is left open.
Our users are running Reader 10.1 on Windows Vista and so far its only users that have left it open longer than two hours, or over night. These forms have been Reader extended and at first save without issue.
Unfortunately, just telling the users not to leave it open isn't an option. We just need Reader X to work.
Thanks in advance for any information you can share about this.
~Connie

Hi Kyle,
Yes there is a lot of code within the forms. Mostly adding instances, and changing the presence on subforms. These particular forms do not have data connections, or execute any code from a server. The script all runs at the client level.
I'm checking with the form content owners to see if I'm allowed to post any of them. If they give the okay then I'll put a sample up here.
~Connie

Cannot burn DVD in Premier Elements 10 longer than 1 hour in Length

Similar Messages

Maybe you are looking for